Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

Richard is a travel freak. He is now out to travel to a distant place with his friends,…

  1. User

    Richard is a travel freak. He is now out to travel to a distant place with his friends, so he took his car and went out with a certain amount of fuel. Thus he must stop at a fuel station before his fuel gets over. There are several fuel station with 1 km gap providing fixed amount of fuel.

    At each fuel station his tank is first emptied and then refueled by the amount of fuel that the current fuel station provides.

    Help him reach his destination as fast as possible making minimum no of stops as there is a party planned at his destination. INPUT

    First Line contains no of test cases T.

    For Each Test case,

    First line contains an integer D, (distance to his destination + 1).

    Next line contains D space-separated integers (N) which is the amount of fuel a fuel station at that kilometer provides. The first digit in this line shows the amount of Fuel he started with.

    Output

    T lines of Integers showing the minimum no of stops he can make to reach the destination for each test case.

    Constraints

    T ≤ 10000

    1 ≤ D ≤ 100000

    1 ≤ N ≤ 1000

    Note: He can go 1km with 1 Litre of Petrol.

    SAMPLE INPUT 2 5 2 15 5 6 2 11 1 3 5 8 9 2 6 7 6 8 9

    SAMPLE OUTPUT 1 2

    Explanation

    First Test case contains 5 Integers.

    Initially he has 2 litres of fuel, so he can go up to 2Kms. Thus he makes a stop at 1st Km. There he gets 15 Liters of fuel by which he can reach the end of his destination So only one stop needed.

    For the second test case, which contain 11 integers.

    He Starts with 1 Litre of Fuel, Stops at 1st Km refueling 3 Litres of fuel. Then he stops at the 4th Km filling 9 litres by which he can reach his destination. Thus two stops needed.

    Note: For updated Problem Statement

    1

    5

    4 1 9 1 4

    for this input output must be

    0

    since he hast 4 litres of fuel and can reach to the destination by itself.

  2. DeepSeek Assistant

    We need to parse the problem carefully. It says:

    "Richard is a travel freak. He is now out to travel to a distant place with his friends, so he took his car and went out with a certain amount of fuel. Thus he must stop at a fuel station before his fuel gets over. There are several fuel station with 1 km gap providing fixed amount of fuel.

    At each fuel station his tank is first emptied and then refueled by the amount of fuel that the current fuel station provides.

    Help him reach his destination as fast as possible making minimum no of stops as there is a party planned at his destination."

    Input: T test cases. For each test case, first line contains D (distance to his destination + 1). Actually D is the distance to his destination + 1? Let's read sample: first test case: D=5, then line: 2 15 5 6 2. Explanation: "Initially he has 2 litres of fuel, so he can go up to 2Kms. Thus he makes a stop at 1st Km. There he gets 15 Liters of fuel by which he can reach the end of his destination So only one stop needed."

    So D=5, but distance to destination is D? Or D-1? They say "First line contains an integer D, (distance to his destination + 1)." So D is distance+1. That means there are D numbers? Actually line after D contains D space-separated integers. The first digit in this line shows the amount of Fuel he started with. Then the rest are fuel at stations at each kilometer? But stations at 1 km intervals from start? Let's interpret: There are fuel stations at each km from 1 to D-1? Because the destination is at distance D? Actually they say D = distance to his destination + 1. So if destination is at distance D_dest, then D = D_dest + 1. Then we have D numbers: first is initial fuel, and then for km positions 1 to D_dest? Or maybe positions from 1 to D-1? Let's check sample: D=5, numbers: 2 15 5 6 2. So initial fuel = 2. Then stations at km 1,2,3,4? But they said there are several fuel stations with 1 km gap. In explanation they say: "Initially he has 2 litres of fuel, so he can go up to 2Kms. Thus he makes a stop at 1st Km. There he gets 15 Liters of fuel by which he can reach the end of his destination So only one stop needed." So they only mention a stop at 1st km. They don't mention km2,3,4. But there are numbers 5,6,2 after 15. They said the test case contains 5 integers. That includes initial fuel. So the stations at km1 gives 15, km2 gives 5, km3 gives 6, km4 gives 2. But destination is at distance 5? Actually D=5, distance to destination is D? The problem says "D, (distance to his destination + 1)". So if D=5, distance to destination is 4? But in explanation they said "by which he can reach the end of his destination" after stopping at 1st km, with 15 liters he can go 15 km, so from km1 he can go to km1+15 = 16 km, but destination is at? Possibly destination is at position D (or D-1)? Let's decode.

    Maybe the stations are at positions 1,2,..., D-1. And the destination is at position D (km D). But then starting from 0 with initial fuel f0. He drives 1 km per liter. He can stop at stations to refuel. When he stops at a station, his tank is emptied first (i.e., he uses up all fuel to get there, then refuels with the station's fuel). So essentially at each station you have a fresh tank of the station's fuel, but you don't carry over any leftover from previous segment. That is a bit unusual: "At each fuel station his tank is first emptied and then refueled by the amount of fuel that the current fuel station provides." That means that when he arrives at a station, he has used fuel to travel from previous stop to this station. He then empties any remaining fuel? Actually it says "first emptied" meaning they drain the tank (maybe discard leftover) and then refill with the station's fuel. So it's like he always starts a leg with exactly the fuel from that station, regardless of any leftover from previous leg. So the leftover fuel does not accumulate. So it's basically a process: Starting at position 0 with initial fuel f0. He can decide to stop at some stations. When he stops at a station at position i, he gets exactly fuel_i, and that becomes his current fuel for the next leg. Any unused fuel from before is discarded. He wants to reach destination (some position) minimizing the number of stops.

    This is reminiscent of a classic problem: Minimum number of refueling stops to reach destination, where you have initial fuel and stations at positions with certain fuel amounts, and when you stop you get that fuel and previous fuel is lost? Actually typical problem (like "Minimum Number of Refueling Stops" from LeetCode) allows you to keep the fuel and you can choose to refuel at stations to extend range, but you don't discard leftover. Here it's different: the tank is emptied before refueling, so you cannot accumulate fuel. That changes the dynamics. Let's think: At each station you stop, you lose any leftover from previous leg, so you only have exactly the station's fuel to go forward. So the only benefit of stopping is to get a larger fuel amount than what you currently have? Actually if you have fuel f, you can travel up to f km from your current location. If you stop at a station within that range, you will get a new fuel amount g, and then you can travel up to g km from that station. So essentially you need to choose a sequence of stations (including possibly none) such that you start at 0 with fuel a0 (initial), then you can go to some station i1 within a0 km, then from i1 you can go to i2 within g_i1 km, and so on, until you can reach destination D_dest. The goal is to minimize the number of stops.

    This is like a "minimum jumps" problem where each station provides a jump length (fuel) from that position. Starting from 0, you have initial jump length a0. You can decide to land at some station within that jump, and then take the jump length from that station. This is exactly the problem of "Minimum number of steps to reach the end" (like jump game II) where each position has a maximum reach, and you start at index 0 with a0, and you can jump to any index within that range, then from there you can jump using that index's value. In Jump Game II, you want the minimum number of jumps to reach the last index. However, there is a twist: In standard Jump Game II, you are at index i and can jump up to nums[i] steps forward, and you want minimum jumps to reach last index. But here we have distances: positions are at integer km marks. The destination is at some position. In jump game, indices represent positions and each index gives maximum forward distance. That matches: start at position 0, with initial fuel a0 => max reach index = a0. At any station i (index i), the fuel amount there is g_i, so from i you can reach up to i + g_i. So the goal is to get to index D_dest with minimum stops (i.e., jumps). However, note that in this problem, the initial fuel is given as first element of the list, and the list includes values for stations at positions 1,2,..., D-1? But D is described as "distance to his destination + 1". Let's check with sample: D=5, list: [2,15,5,6,2]. In jump game terms, if we consider indices 0 to maybe 4? Typically we have N positions (including start?). Let's try mapping: Position 0: initial fuel = 2 (can go to indices 1,2?). But we have stations at positions? The numbers after the first: they correspond to stations at positions 1,2,3,4 (since there are 4 numbers for stations?). That would be indices 1..4. Destination might be at position 5? But if D = distance to destination + 1, then distance to destination = D - 1 = 4. So destination at position 4? Let's test: initial fuel =2, so from position 0 can go up to position 2. He stops at station 1 (position1) with fuel 15. From position1, with fuel 15, he can go to position1+15=16, which is beyond destination at position4, so he can reach. So stops=1. If we consider indices as positions, and we need to reach position D_dest = D-1 = 4. That matches: start at 0, can go to 2; stop at 1 -> fuel 15 -> can go to 16 >=4. So 1 stop.

    Second test: D=11, list: 1 3 5 8 9 2 6 7 6 8 9. So initial fuel=1, D-1=10 as destination? He stops at 1st km (position1) gets 3, then stops at 4th km (position4) gets 9, then can reach destination (position10). So stops=2. Let's see: From 0 with 1, can go to position1. Stop at 1 -> fuel 3, can go to position1+3=4. Within that, he stops at position4 -> fuel 9, can go to position4+9=13 >=10. So yes.

    Now for the updated problem: Input: 1, 5, 4 1 9 1 4. Output must be 0. Explanation: initial fuel=4, D-1=4? Actually D=5, destination=4? With initial fuel 4, from 0 can go to 4, which is exactly destination? So 0 stops. That matches.

    Thus the problem reduces to: Given array A of length D, where A[0] is initial fuel (or jump length from index 0), and A[1..D-1] are jump lengths at positions 1 to D-1. Destination is at index D (or D-1? Let's clarify: In examples, D=5, destination is at position 4? Actually they said D = distance to destination + 1. So if destination is at distance X from start, then D = X+1. So destination is at index X. In array, we have A[0] (initial fuel), and stations at indices 1,...,X? Actually there are D numbers, which would correspond to indices 0,1,..., X? Because if D = X+1, then number of indices from 0 to X inclusive is X+1 = D. So the last index (index X) would be the destination? But they said stations are at each km with 1 km gap, and the last number might be a station at the destination? Wait: The problem says: "There are several fuel station with 1 km gap providing fixed amount of fuel." And "Help him reach his destination as fast as possible making minimum no of stops". The destination may not have a station? Typically, the destination might not have a fuel station, but they gave D numbers, where first is initial fuel, and then D-1 numbers for stations? In the sample, D=5, they have numbers: 2 (initial), 15,5,6,2. That's 5 numbers total. The last number 2 might correspond to a station at km 4? Or the destination? But in explanation they didn't mention a station at km4. They said after stopping at km1 with 15, he can reach the end. So the station at km4 (with 2) is irrelevant because he doesn't need to stop there. So it's okay that there is a station at index 4. But is the destination after index 4? Let's imagine indices 0..4 are positions where stations exist? But the destination might be at index 5? However, if destination is at 5, then from index1 with fuel15, he can go to 16, so reaches destination 5. That also works. So we need to decide exact mapping: Is the destination at index D? Or index D-1? Let's check second example: D=11. Destination is at distance? Explanation: "He Starts with 1 Litre of Fuel, Stops at 1st Km refueling 3 Litres of fuel. Then he stops at the 4th Km filling 9 litres by which he can reach his destination." So he stops at km1 and km4. The destination is at which km? They didn't specify but presumably at km 10? Because D=11 => maybe destination at km10. That is typical: if we have D numbers including initial, then indices 0..D-1 correspond to positions? Let's count: positions: start at 0, stations at 1,2,..., D-1? But that would be D-1 stations, plus start. Destination at D? For D=5, that would be position5. But in explanation they never mention station at position5. However, they also don't use station at position4? Actually they used only station at position1. But the station at position4 might exist but not used. Destination could be at position5; from position1 with fuel15 you can reach position1+15=16 >=5, so ok. For D=11, destination could be at position11? But from position4 with fuel9, you can reach position4+9=13 >=11, okay. So destination could be at index D (position D). But then there are D numbers: initial at index0, stations at indices1..D-1? That gives D numbers: A[0]...A[D-1]. Destination is beyond index D-1 at index D. That means there is no station at the destination; the last station is at index D-1. That fits: number of stations = D-1. And D = distance to destination + 1? Actually if destination is at index D, distance = D, but then D in input would be distance+1? That would be D+1? That would not match. Let's compute: If destination is at position D (km D), then distance to destination is D km. But they say D = distance to destination + 1. So then D would be D_dest + 1, meaning D_dest = D-1. So destination is at position D-1. But then we have D numbers: initial and stations at 1,..., D-1? That would be stations up to position D-1 inclusive, which would be at the destination, but then there would be a station at the destination. But they said there is a party planned at his destination, and they want minimum stops; presumably you don't need to stop at the destination. So having a station at destination would be irrelevant because you would already be there. But it's possible that there is a station at the destination, but you don't need to use it. So both interpretations could work. However, the key is we need to find the minimum number of stops to reach the destination, i.e., you must be able to go from start to destination with stops at some stations. The stations are at positions 1..(D-1) if destination is at D, or positions 1..(D) if destination is at D? Let's check consistency with sample and note.

    In the updated example: Input: 1, 5, 4 1 9 1 4. Output must be 0. If D=5, destination is at position 4 (distance=4), initial fuel=4, can go directly to 4 with no stops. That matches if destination = 4 (D-1). Then the numbers would be: initial at 0, stations at positions 1,2,3,4? Because there are 5 numbers total, including initial, so stations at indices 1,2,3,4. But if destination is at position 4, then there is a station at the destination (position4) with fuel 4. But you don't need to stop there because you can arrive directly. So that's okay. If destination were at position5, then initial fuel=4 cannot reach 5 directly; you would need to stop. But output says 0 stops, so it must be that destination is at position4. So destination is at index D-1. Therefore, mapping: D = distance to destination + 1, meaning distance = D-1, destination is at position D-1. The array of length D: A[0] = initial fuel, A[1] ... A[D-1] are the fuel amounts at stations at positions 1,2,..., D-1 (including destination station). But since destination is at position D-1, there is a station at destination, but you don't have to stop there; you just need to be able to reach that point. So the goal is to get to index D-1, using minimum number of stops at indices among 1..D-2? Actually you can also stop at index D-1 (destination) if you want, but that would count as a stop and you'd be already at destination; it's unnecessary. So it's better to ignore that. But in algorithm, we treat the last index as the target to reach; we don't need to stop there.

    Thus the problem is exactly: Given an array A of size D (indices 0..D-1), where A[i] is the maximum distance you can jump forward from position i (i.e., you can go from position i to any position j where i < j <= i+A[i]), but note that when you jump, you are actually moving to a station, and you will then refuel (i.e., get the jump length of that station). Starting at index 0, we want to reach index D-1, minimizing the number of jumps (stops). But note: In this mapping, we have a nuance: In the actual scenario, when you stop at a station, you get that station's fuel and discard previous fuel. This exactly corresponds to the jump model: from index i, you can go to any index within i+A[i] (including possibly beyond D-1). The number of stops is the number of stations you stop at, which is the number of jumps, because the start doesn't count as a stop. So we need to compute the minimum number of jumps to reach index D-1 (or beyond) given jump lengths A[0..D-1], where we can land on any index and then use its jump length. This is classic "Minimum number of jumps to reach the end" (LeetCode 45). However, there is a nuance: In classic jump game, you can jump from any index to any index within its range, and you want the minimum number of jumps to reach the last index. The typical greedy solution O(n): maintain current maximum reach, previous maximum reach, and steps.

    But note: In the classic problem, the jumps are made with the idea that you start at index 0, and you can take at most A[i] steps from i. The minimum number of jumps can be found by a BFS-like greedy: At each step, consider the farthest you can reach from the current window, etc. This is O(n) and works.

    However, we must be careful: In the classic problem, it's assumed that you can jump any distance up to A[i], and when you land at j, you can then jump from j. This matches exactly.

    But wait: In the original problem statement, they said "At each fuel station his tank is first emptied and then refueled by the amount of fuel that the current fuel station provides." This means if you arrive at a station with some leftover fuel, it's discarded. But in the jump model, leftover fuel is not used because from the station you start with exactly A[i] fuel, irrespective of how much you had left. That matches: the fuel from the previous leg doesn't add. So it's exactly like a jump.

    One more nuance: In typical jump game, the value at each index is the maximum jump length. You can jump less than that. Here, you can travel exactly the amount of fuel you have; you can't "choose" to travel less, you must travel until you run out? Actually you can stop at any intermediate station before running out. So you can decide to stop at a station within the range, which is analogous to jumping to a specific index less than or equal to i+A[i]. So it's the same.

    Thus the problem reduces to: Given an array of non-negative integers A[0..n-1] (n = D), where n >= 1, and we need to reach index n-1 (the destination). We need the minimum number of jumps from index 0. If it's impossible, what then? The problem statement doesn't mention impossibility. Possibly all test cases are such that it's possible? Maybe not; but they said "Thus he must stop at a fuel station before his fuel gets over." But could be impossible if initial fuel insufficient and stations not enough. But we must handle impossibility. However, sample and constraints don't discuss. Maybe they guarantee it's always possible. But to be safe, we might need to output something like -1? But not mentioned. Let's read problem: "Help him reach his destination as fast as possible making minimum no of stops as there is a party planned at his destination." It implies that there is a way; maybe they assume he can always reach. But we should still handle case where impossible and maybe output something like -1 or something. But typical coding challenge would have constraints such that it's always possible. However, let's think: with given constraints, it's possible that initial fuel is zero? But constraints say 1 ≤ N ≤ 1000, so initial fuel at least 1. So he has at least 1 liter. But if the destination is beyond reachable even after stops, it might be impossible. For example: D=3, numbers: 1 1 0 (destination at index 2). initial=1, can go to index1. At index1, fuel=1, can go to index2? index1+1 =2, can reach exactly. So reachable. Try: D=3, numbers: 1 0 0. From index0, can go to index1 (since 1). At index1, fuel=0, cannot go further. So cannot reach index2. That might be impossible. The problem statement doesn't specify output for impossible. But perhaps they guarantee reachability. However, let's not assume; we can compute minimum jumps and if not reachable, we can output something like -1 or maybe 0? But the problem says "minimum no of stops he can make to reach the destination". If unreachable, maybe it's not considered. I'd lean that they ensure reachability. Also note: D can be up to 100,000 and T up to 10,000, but total D across test cases might be up to 1e5? Actually T up to 10000 and each D up to 100000, so total could be up to 1e9 which is too large, so there must be a limit on total sum of D across test cases. Usually such problems have total input size manageable, but not specified. We'll design an O(n) per test case solution, which should be fine if total sum of D across test cases is <= something like 10^6 or 10^7.

    Now confirm with sample: For test case 1: A = [2,15,5,6,2], n=5. Compute min jumps: Starting at index 0 (jump length 2). We can jump directly to index2? Actually we can jump to any index within 2. But we need min stops. Classic solution: Steps=0, current_end=0, farthest=0. For i from 0 to n-2: farthest = max(farthest, i+A[i]). If i == current_end: steps++, current_end = farthest. For array [2,15,5,6,2], let's simulate:

    i=0: farthest = max(0,0+2)=2. i == current_end (0)? yes, steps=1, current_end=2. i=1: farthest = max(2,1+15)=16. i=1 != current_end (2) so no step. i=2: farthest = max(16,2+5)=16. i == current_end (2) -> steps=2, current_end=16. But then we have i=3,4 but farthest already >=4 so we can break? Actually algorithm would stop after i=2? But it would set steps=2. However, we know answer should be 1. So why did algorithm produce 2? Because we need to consider that we can jump from index0 directly to index1 (or 2). In classic Jump Game II, the minimum jumps for [2,15,5,6,2] to reach index4 (n-1=4) is actually 2? Let's test manually: From index0 (value 2) we can jump to index1 or index2. If we jump to index2 (value 5), from index2 we can jump to index2+5=7 which covers index4, so 1 stop? Wait, we start at index0, we need to stop at stations. If we jump from start directly to index2 (i.e., skip index1), that's a stop at index2. Then from index2 we can go to destination. That would be 1 stop? Actually we need to count stops. Starting at index0, we haven't stopped yet. We drive to index2, stopping at station at index2. That's one stop. Then from index2 with fuel5, we drive to destination. So total stops = 1. That matches answer. So min jumps should be 1. But the classic greedy algorithm gave 2 if we incorrectly implement? Let's simulate classic algorithm correctly. Standard algorithm for minimum number of jumps to reach last index (LeetCode 45) works as:

    int jumps = 0, currentEnd = 0, farthest = 0; for (int i = 0; i < n - 1; i++) { farthest = max(farthest, i + nums[i]); if (i == currentEnd) { jumps++; currentEnd = farthest; if (currentEnd >= n - 1) break; } } return jumps;

    Let's apply to nums = [2,15,5,6,2], n=5.

    Initialize jumps=0, currentEnd=0, farthest=0.

    i=0: farthest = max(0,0+2)=2. Since i == currentEnd (0), jumps=1, currentEnd=2. Now currentEnd=2 < n-1=4.

    i=1: farthest = max(2,1+15)=16. i (1) != currentEnd (2) -> no update.

    i=2: farthest = max(16,2+5)=16. i == currentEnd (2) -> jumps=2, currentEnd=16. Now currentEnd >=4, we can break (but we need to check if break condition applied after update). Actually typical implementation might break after setting currentEnd if currentEnd >= n-1. So jumps would become 2, but we break after that. So answer 2. However, expected is 1. So what's wrong?

    But wait, the classic algorithm assumes that you must take a jump from each position you land on, and the greedy selects the farthest reachable at each step. However, is it always optimal? In this case, from index0 we can jump to index2 (within range 2). But the greedy algorithm, when i=0, it sets currentEnd=2 and jumps=1. That means after one jump, we can be anywhere up to index2. Then at i=2, it forces another jump because i == currentEnd, indicating we need to take another jump from some point within the previous range to go further. But is it necessary to take a second jump? If we had chosen to jump from index0 to index2, then from index2 we can reach index4 directly, which would be a total of 1 stop, but the algorithm says we need 2 jumps. The discrepancy arises because the algorithm counts the number of jumps, not the number of stops? Let's check: In the classic problem, a jump from index0 to index2 counts as 1 jump. But then to go from index2 to index4, that's another jump, totaling 2 jumps. However, in our interpretation, stopping at index2 counts as a stop, and then driving to destination without stopping is not a stop. So why would driving from index2 to index4 count as a stop? Because in jump game, you must land exactly on the last index to consider it reached; if you jump from index2 to index4, that's a jump. So the number of jumps equals number of stops? Let's think carefully:

    In the journey, Richard starts at km 0 with initial fuel. He does not count as a stop at start. He travels along the road. He may stop at some stations to refuel. The act of stopping at a station is a stop. When he arrives at the destination, he does not refuel (unless he stops, but no need). So the number of stops equals the number of stations he voluntarily stops at to refuel.

    In the jump model, if we think of indices as positions along the road, and we start at index 0. To get to index 4 (destination), we might:

    • Directly: from 0 with fuel 2, can we reach index 4? 0+2=2 <4, so no.

    • Stop at index 1: stop1, then from index1 with fuel15, can reach index4 without further stops. So total stops =1.

    • Stop at index 2: stop1, then from index2 with fuel5, can reach index4 without further stops (2+5=7>=4). So stops=1.

    Thus in both cases, you stop once and then go to destination. In jump model, this corresponds to: from index0, you jump to index1 (or index2) and then from that index you "jump" to the destination. But the second part is not a jump because you don't stop at destination. However, in the jump game model, the last "jump" is needed to land on the last index. In the typical problem, you are required to land exactly on the last index, so a jump from index1 to index4 counts as a jump (since you need to move from index1 to index4). So the number of jumps would be 2: index0->index1 (jump1), index1->index4 (jump2). That counts as 2 jumps, but stops = jumps-1? Actually because the initial is not a stop, and the final movement to destination is not a stop either. So if we have a sequence of positions visited: start at 0, then stop at stations i1, i2, ..., ik, then finally destination. The number of stops is k. The number of moves (segments) is k+1. In jump game, each move is a jump. So jumps = stops + 1? Wait, check: In jump game, you start at index0, and you need to reach index n-1. Each jump moves you to a new index (which could be considered a stop at that index). The number of jumps is the number of times you move from one index to another. If you reach the destination, your last jump lands you on the destination. So total jumps = number of stations visited (including possibly destination if you count landing as a stop? Usually in jump game, you count the number of jumps you take; starting at index0, you take a jump to some index, then from there another jump, until you land on last index. So if you stop at one station and then go to destination, that's 2 jumps: first from start to station, second from station to destination. However, in our problem, the second movement from station to destination does not count as a stop because you don't refuel at the destination. So the number of stops equals number of jumps minus 1? Let's verify: Example: start->station1->destination. That's one stop (station1). The jumps: start to station1 (jump1), station1 to destination (jump2). So jumps=2, stops=1. So stops = jumps - 1. But is that always true? Consider start directly to destination with no stops: jumps? You need to get from start to destination; that's a movement. In jump game, to go from index0 to index4 directly, you would make a single jump (if within range). That's jumps=1. In our problem, stops=0. So stops = jumps - 1? 1-1=0, yes. So the relationship seems stops = jumps - 1.

    But in the classic greedy algorithm for minimum jumps, the result is the minimum number of jumps required, which includes the final jump to destination. So to get minimum stops, we can compute minimum jumps and subtract 1, provided that it is possible to reach and at least one jump is needed (i.e., direct reachable yields jumps=1 -> stops=0). Wait, but if direct reachable, jumps=1, stops=0. That matches.

    Now check sample: For first test case, classic min jumps for [2,15,5,6,2] to reach index4 is 2? Let's compute manually. From start with 2, we can jump to index2 (within range). That's jump1. From index2, with 5, we can jump to index4. That's jump2. So jumps=2, stops=1. Similarly, if we jump to index1: jump1 to index1, jump2 to index4 -> jumps=2, stops=1. So indeed min jumps is 2. But could there be a path with jumps=1? That would require starting at index0 and jumping directly to index4, but 0+2=2<4, impossible. So min jumps =2. Then stops = 2-1 =1. That matches output 1.

    Second test: D=11, array length 11, indices 0..10. Need to reach index10. Let's compute min jumps. According to explanation: start 1 -> index1 (jump1), index1 (fuel3) -> index4? Actually they stop at 1st km (index1) and then at 4th km (index4) then reach destination. So path: 0->1 (jump1), 1->4 (jump2), 4->10 (jump3). That's 3 jumps, stops=2. Let's see if there is a better path? Possibly 0->? But initial fuel1, can only go to index1. So jump1 to index1 is forced. From index1 (fuel3) can go up to index4. Could we go directly from index1 to index10? 1+3=4, no. So need another stop. So jumps=3, stops=2. So output 2. Yes.

    Thus the problem is essentially: compute minimum number of jumps to reach index D-1 from index0, where jumps are defined as moving from one index to another using the jump length at the current index. The answer is jumps-1 (or 0 if D==1? Actually if D=1, destination is at index0? Because D = distance to destination +1, if D=1, then distance=0, destination is at start, so stops=0. But D>=1? Constraint says 1 ≤ D ≤ 100000. So D=1 possible. In that case, there is just one number, which is initial fuel, and destination is at same point (distance 0). So no stops needed, output 0. Also for D>1, if direct reachable, jumps=1 => stops=0. So the formula holds.

    Thus we can use the classic O(n) greedy algorithm to compute min jumps, and then answer = max(0, jumps-1) (though jumps will be at least 1 if reachable, because you need at least one jump to move from start? Actually if start is already at destination (D=1), we need 0 jumps. So we must handle that separately. If D==1, output 0.

    Now, we need to check for unreachable case: If it's impossible to reach index D-1, what to output? Possibly the problem doesn't include such cases. But if it does, we might output -1 or something. But the problem statement didn't mention. Given that the input may have scenarios where it's impossible, we should consider. Usually in these kinds of problems, they guarantee reachability. But we can also compute if farthest never reaches D-1. In the greedy algorithm, if after processing all i < n-1, farthest < n-1, then it's impossible. In that case, maybe output -1. However, the sample doesn't show. Let's re-read: "Thus he must stop at a fuel station before his fuel gets over." That implies he will need to stop; maybe it's always possible to reach. I'll assume reachable.

    Now, we need to be careful about one more nuance: The process says: "At each fuel station his tank is first emptied and then refueled by the amount of fuel that the current fuel station provides." That means when he arrives at a station, any leftover fuel is discarded, and he gets exactly the station's fuel. This matches the jump model because you can't combine fuel. However, note: If you pass a station without stopping, you don't get its fuel. But you could potentially stop later. So it's exactly like you have a set of possible positions to land on and from each you get a new range.

    Thus the algorithm is clear.

    Now we must consider large T and D. We need fast input reading, likely using sys.stdin in Python.

    Edge Cases: D=1 -> output 0.

    Otherwise compute min jumps.

    But there is a nuance: The classic algorithm computes min jumps to reach the last index. However, we should ensure that we correctly handle the case where the initial fuel is 0? But constraints say N >= 1, so fine.

    But wait: The problem says: "1 ≤ N ≤ 1000". So each fuel amount is between 1 and 1000 inclusive. So all A[i] >= 1. So we won't have zeros, except possibly? Actually 1 ≤ N ≤ 1000, so no zeros. That simplifies; we always have positive jumps, but still may be impossible if the jumps can't chain to the end? Possibly if gaps are too large? But with positive values, might always be reachable? Not necessarily: Example: D=3, A = [1,1,1]. Start at 0 can go to 1. From 1 with 1 can go to 2 (destination). So reachable. If A = [1,1,?] Actually D=3, indices 0,1,2. Destination index2. With A[0]=1, can go to index1. A[1] must be at least 1, so can go to index2. So reachable. Actually if all numbers >=1, you can always move one step at a time. So reachable always? Not exactly: Suppose D=4, indices 0,1,2,3. A[0]=1 -> can go to index1. A[1]=1 -> can go to index2. A[2]=1 -> can go to index3. So yes always reachable by moving one km at a time because each station provides at least 1, so you can always go at least 1 km from any station, so you can always proceed one step. So with all N >= 1, it's always possible to reach the destination (by stopping at every station). So no unreachable case. Good.

    Thus answer = min jumps - 1, where min jumps computed via greedy.

    But we need to verify the greedy works with positive integers only. The classic greedy algorithm works for non-negative integers, but sometimes there are nuances: It assumes you can jump to any index within range, and it yields the minimum number of jumps. That algorithm is proven correct for the standard jump game II. So we can use it.

    Now implement:

    For each test case:

    • read D
    • read the list of D integers
    • if D == 1: print(0) and continue
    • n = D
    • jumps = 0
    • current_end = 0
    • farthest = 0
    • for i in range(n-1): # we don't need to process last index farthest = max(farthest, i + A[i]) if i == current_end: jumps += 1 current_end = farthest # optional: if current_end >= n-1: break
    • After loop, answer = jumps - 1 (since jumps counts number of jumps to reach last index). For D>1, jumps will be at least 1? Actually if start can directly reach destination, then during iteration: i=0, farthest = A[0]. i == current_end (0) -> jumps=1, current_end = A[0]. Then if current_end >= n-1, we break. So jumps=1. answer = 0. Good.

    But we must check case D=2: indices 0,1. n=2. Need to reach index1. Process i=0 only: farthest = 0+A[0]. i == current_end -> jumps=1, current_end = A[0]. Since current_end >= 1, break. answer = 0 if A[0] >=1 (which it is) => stops 0. That means if initial fuel >=1, he can go directly to destination (since distance = D-1 =1). So no stop needed. That's correct: if destination is 1 km away and initial fuel >=1, he can go without stopping. So output 0.

    Thus algorithm is consistent.

    Now we need to handle large T. We'll read all input efficiently. Use sys.stdin.buffer.read() and split into ints.

    Now check sample:

    Test1: D=5, A=[2,15,5,6,2] n=5. i=0: farthest=2, i==0 => jumps=1, current_end=2. i=1: farthest=max(2,1+15=16)=16, i!=2, continue. i=2: farthest=max(16,2+5=7)=16, i==2 => jumps=2, current_end=16. Since current_end>=4, break? Actually we would break after jumps++ if we check condition. But even if we don't break, we have jumps=2, answer=1. So answer 1. Good.

    Test2: D=11, A=[1,3,5,8,9,2,6,7,6,8,9] Simulate quickly: n=11. i=0: farthest=0+1=1, i==0 => jumps=1, current_end=1. i=1: farthest=max(1,1+3=4)=4, i==1 => jumps=2, current_end=4. i=2: farthest=max(4,2+5=7)=7. i=3: farthest=max(7,3+8=11)=11. i==3? current_end=4, i!=4, so no jump. i=4: i==4? current_end=4, so i==4 => jumps=3, current_end=farthest=11. Now current_end>=10, break. jumps=3 => answer=2. Good.

    Updated example: D=5, A=[4,1,9,1,4] i=0: farthest=4, jumps=1, current_end=4. Since current_end>=4 (n-1=4) break? Actually we check if current_end >= n-1 after update: current_end=4 >=4, so we can break early. jumps=1 => answer=0. Good.

    Thus solution works.

    Now, there is a nuance: The classic algorithm may sometimes overcount? Let's test a tricky case: D=3, A=[3,1,1]. n=3. i=0: farthest=3, jumps=1, current_end=3. Since current_end>=2, break. jumps=1 => answer=0. Indeed initial fuel=3 can reach index2 directly, so stops=0. Correct.

    Case: D=4, A=[1,2,1,1]. i=0: farthest=1, jumps=1, current_end=1. i=1: farthest=max(1,1+2=3)=3, i==1 => jumps=2, current_end=3. Now i=2: farthest=max(3,2+1=3)=3, i=2? current_end=3, i==2? no, current_end=3, i=2 <3, so no jump. Loop ends. jumps=2 => answer=1. Let's see manually: start with 1 -> must stop at index1 (since can't reach index3). At index1 get 2, can go to index3 (destination) directly? 1+2=3, can reach index3 (destination). So stops=1. correct.

    Thus algorithm correct.

    Now we must handle D up to 100,000, T up to 10,000. The sum of D across all test cases might be up to maybe 10^6 or 10^7, but we can't assume too large. In Python, O(total D) should be fine if total D is about 10^6. But if T=10000 and each D=100000, total would be 1e9, impossible for input size. Probably the total sum of D across all test cases is limited by something like 10^6 or 10^7. We'll implement efficient I/O.

    Now, let's think about potential pitfalls: The problem statement says "Note: For updated Problem Statement 1 5 4 1 9 1 4 for this input output must be 0". That's consistent.

    We must be careful: In the input format, after T, each test case consists of a line with D, then a line with D integers. There may be extra spaces or newlines. We'll parse all ints.

    Now implement solve():

    def solve(): import sys data = list(map(int, sys.stdin.buffer.read().split())) it = iter(data) T = next(it) out_lines = [] for _ in range(T): D = next(it) A = [next(it) for _ in range(D)] if D <= 1: out_lines.append('0') continue n = D jumps = 0 current_end = 0 farthest = 0 # We only need to process up to n-2? Actually for i in range(n-1): for i in range(n-1): farthest = max(farthest, i + A[i]) if i == current_end: jumps += 1 current_end = farthest if current_end >= n-1: break stops = jumps - 1 out_lines.append(str(stops)) sys.stdout.write("\n".join(out_lines))

    That should work.

    But is there any scenario where we need to consider that when you arrive at a station, you must empty the tank and refuel exactly that amount, but you cannot "choose" to not stop? In our model, we can choose to stop or not. That's analogous to deciding whether to jump from a certain index. In the jump algorithm, you are forced to jump from the index you are at; you can't stay. But you can decide to jump to a farther index without stopping at intermediate ones. So it matches.

    Now, think about if there is any nuance: The problem states: "At each fuel station his tank is first emptied and then refueled by the amount of fuel that the current fuel station provides." That suggests that if he stops, he loses any leftover fuel. But if he passes a station without stopping, he doesn't get fuel. So our model is fine.

    Now, is there any alternative interpretation? Could the process be that he can only refuel when his tank becomes empty? The phrase "Thus he must stop at a fuel station before his fuel gets over." suggests he must stop before running out, but not necessarily exactly when arriving. But the model of jumping works because if he has fuel, he can drive past stations without stopping, as long as he doesn't run out before next stop. In the jump model, we assume he can only stop exactly at stations, not between them. But that's fine because stations are at integer km marks, and fuel consumption is 1 km per liter. So if he wants to stop at a station at position j, he must have at least j - current_position fuel to get there. He can also skip stations. So the jump model where from position i you can jump to any j > i with j <= i+fuel_i is accurate.

    Thus solution is correct.

    Now, is there any possibility that the problem expects a different solution, maybe using a priority queue? That would be for a different problem where you can accumulate fuel (like refueling stops with unlimited capacity and you want to minimize stops). But here it's not accumulation; it's replacement. So it's essentially a graph problem with edges from i to j where j-i <= A[i]. The minimum number of edges from 0 to D-1 in a DAG with unit weights can be solved by BFS/greedy. The greedy algorithm is standard for min jumps.

    Thus final answer.

    But wait, there's a twist: The problem says "making minimum no of stops as there is a party planned at his destination." Could it be that they also consider time? "as fast as possible" might indicate that they want to minimize travel time? But then they also want minimum number of stops. Actually they say "reach his destination as fast as possible making minimum no of stops". That might be ambiguous: does "as fast as possible" relate to the stops? Possibly they want to minimize both? Usually it's just the minimum stops, and they phrase "as fast as possible" to indicate he wants to get there quickly, but the primary goal is to minimize stops because there's a party. So it's just min stops.

    Now, we must consider that maybe they interpret that he cannot skip stations? But the description says "There are several fuel station with 1 km gap providing fixed amount of fuel." and "Thus he must stop at a fuel station before his fuel gets over." That suggests he can stop at any station before fuel runs out, but not that he must stop at all stations. So skipping is allowed.

    Thus the solution stands.

    Now, confirm with some additional test cases:

    Case: D=2, A=[1,1] -> output 0. (initial fuel 1, destination distance 1, reach directly)

    Case: D=3, A=[1,100,1] -> output 1? Start with 1 -> must stop at index1, then with 100 can reach index2. So stops=1. Our algorithm: i=0: farthest=1, jumps=1, current_end=1; i=1: farthest=max(1,1+100=101)=101, i==1? current_end=1, i==1 => jumps=2, current_end=101; break? after i=1 jumps=2, answer=1. OK.

    Case: D=4, A=[2,2,2,2] -> start 2 -> can go to index2? Actually from 0, range 2: can go to index1 or 2. If we go to index2, then from index2 with 2, can reach index4? index2+2=4 >=3 (destination index3). So stops=1. Our algorithm: i=0: farthest=2, jumps=1, current_end=2. i=1: farthest=max(2,1+2=3)=3. i=1!=2, continue. i=2: farthest=max(3,2+2=4)=4, i==2 => jumps=2, current_end=4. jumps=2 => answer=1. Good.

    Case: D=4, A=[1,1,2,1] -> start 1 -> must stop at index1. From index1 with 1 -> can go to index2. From index2 with 2 -> can go to index3 (destination). So stops=2. Our algorithm: i=0: farthest=1, jumps=1, current_end=1; i=1: farthest=max(1,1+1=2)=2, i==1 => jumps=2, current_end=2; i=2: farthest=max(2,2+2=4)=4, i==2 => jumps=3, current_end=4; jumps=3 => answer=2. Good.

    Now we need to ensure we handle D up to 100k and T up to 10k, but total D within memory. If total D is up to 10^7, storing all arrays at once might be memory heavy but we process one test case at a time. In our code, we read all ints into a list, then iterate. That could be memory heavy if total ints huge. But typical input constraints probably limit total ints to around 10^6 or 10^7. We can also use streaming reading line by line. Safer: use sys.stdin.buffer.readline for each test case. That way we don't have to store all ints at once. I'll implement that for robustness.

    Let's implement:

    import sys

    def solve(): import sys input_data = sys.stdin.buffer T_line = input_data.readline() while T_line.strip() == b'': T_line = input_data.readline() T = int(T_line) out = [] for _ in range(T): # read D line, skip empty lines line = input_data.readline() while line.strip() == b'': line = input_data.readline() D = int(line) # read the list of D ints: might be on multiple lines? Problem says next line contains D integers, but sometimes they might be split across lines. Safer: read until we have D ints. nums = [] while len(nums) < D: parts = input_data.readline().split() if not parts: continue nums.extend(map(int, parts)) A = nums[:D] # we only need D numbers; if more due to reading next test case? We'll trust input. # Process if D <= 1: out.append('0') continue n = D jumps = 0 current_end = 0 farthest = 0 for i in range(n-1): # compute reach reach = i + A[i] if reach > farthest: farthest = reach if i == current_end: jumps += 1 current_end = farthest if current_end >= n-1: break stops = jumps - 1 out.append(str(stops)) sys.stdout.write("\n".join(out))

    But careful: In the while loop reading nums, we might over-read into next test case if the line contains more than D ints? Actually the input specification says the next line contains D space-separated integers. So it should be exactly D ints on that line. However, sometimes problems may have them split across lines, but not typical. To be safe, we can read a line and split, then ensure we only take D ints. If the line has more than D, that would be weird but possible if formatting errors. But we can simply read one line and split, then assert len == D. The while loop approach with extend may read more lines if the line doesn't contain all D ints, but that might be overkill and could accidentally read from next test case if the line contains exactly D but we erroneously think it's less? Actually if the line contains exactly D ints, then len(nums) becomes D and loop stops. If it contains fewer (maybe due to line length limit), we continue reading. That's okay. But if it contains more than D, then we would have more than D ints in nums before slicing to D. That's fine; we only take first D. However, if it contains more than D, the extra ints would belong to the next test case, causing misalignment. But input spec says it's exactly D ints on that line, so it shouldn't have extra. So reading one line is sufficient. I'll use reading a line and splitting, and if we get fewer (maybe due to line breaks), we can read again. But for performance and simplicity, we can use the approach: read a line, split, map to ints, ensure we have D ints. If not, read more lines until we have D ints. That is safe.

    Given that D can be up to 100k, the line might be long but Python can handle. However, some judges have line length limits; but 100k numbers each up to 3-4 digits plus spaces could be ~400k characters, which is okay for a line. So reading one line should be fine.

    Thus implement as:

    line = input_data.readline() while line.strip() == b'': line = input_data.readline() A = list(map(int, line.split()))

    if len(A) < D: we need to read more? unlikely. But for safety, we can handle.

    while len(A) < D: more = list(map(int, input_data.readline().split())) A.extend(more)

    But we must be careful not to read beyond D. If we read more than D due to multiple lines, we need to keep the extra for next test case? Actually if we read multiple lines to get D ints, and those lines might contain extra ints beyond D? Typically each line may contain some numbers, but we only need D. So we can read line by line, accumulate, and when we have >= D, we take first D and push back the rest? That's messy. Since input is well-formed, I'll assume one line contains exactly D ints. In many programming challenges, the array is given on a single line. So I'll adopt that.

    But the problem statement: "Next line contains D space-separated integers (N) which is the amount of fuel a fuel station at that kilometer provides." That implies exactly one line. So we can read one line.

    Thus code:

    line = input_data.readline() while line.strip() == b'': line = input_data.readline() A = list(map(int, line.split())) assert len(A) == D # optional

    But sometimes there might be leading/trailing spaces, but split handles.

    Ok.

    Now check the updated note: "Note: For updated Problem Statement

    1

    5

    4 1 9 1 4

    for this input output must be

    0"

    This is just a test case with T=1, D=5, numbers as given. So our code would output 0.

    Now finalize.

    But let's think about complexity: For each test case, O(D). D total up to maybe 1e6 or 1e7, fine.

    Now, but there is a nuance: The greedy algorithm we used is correct only if we treat the jump lengths as maximum steps we can take from that index, and we can choose any landing index within that range. The algorithm indeed yields the minimum number of jumps. Proof: It's standard.

    One more nuance: The values are up to 1000, but D up to 100000, so i+A[i] can be up to 100000+1000=101000, which is within int.

    Now, output: "T lines of Integers showing the minimum no of stops he can make to reach the destination for each test case." So we print one integer per line.

    Thus solution seems done.

    But wait, the sample input and output:

    SAMPLE INPUT 2 5 2 15 5 6 2 11 1 3 5 8 9 2 6 7 6 8 9

    SAMPLE OUTPUT 1 2

    Our code yields 1 and 2. Good.

    Now, is there any possibility that the answer should be -1 if not reachable? Since they didn't mention, and all numbers >=1, it's always reachable. So fine.

    Now, I'll write final solution.

    But just to be thorough, let's think about the possibility that the starting fuel is not considered as a stop, and if he starts at 0 with fuel 0? Not possible as per constraints.

    Now, verify for D=1: There is only initial fuel and destination at distance 0, so stops=0. Our code prints 0.

    Now, we could also compute directly stops without computing jumps: we can simulate the greedy but count stops as number of times we have to jump except the final movement. But using jumps-1 is fine.

    Alternative: We could compute the number of stations where we need to refuel. This is essentially the number of times we extend our range except the initial range. The greedy algorithm for minimum stops can also be: keep track of current fuel (range) and farthest, and when current fuel runs out, make a stop (increment stops) and refuel to farthest - current position? But careful: In this problem, when you stop, your new fuel is exactly the station's fuel, not the farthest - current position. The greedy algorithm for jump game essentially counts jumps, not stops. But we can directly count stops by a slight modification: start with fuel = A[0]; stops = 0; farthest = A[0]; for i from 1 to n-1: if i > fuel: we cannot proceed? But since all positive, we might never have i > fuel because we stop earlier? Actually we need to decide when we would have made a stop. The standard algorithm for min jumps can be thought as: we make a stop (i.e., refuel) when we have exhausted the range of the previous stop. That's exactly when i == current_end in the algorithm, and we then increment jumps. But that increment corresponds to taking a jump from some point in the previous window. That jump corresponds to a stop at the point we are jumping from? Actually in the algorithm, each increment of jumps corresponds to a decision to jump from the current position (which is the index i where i == current_end) to some future point. But that jump is made from a station that we must have stopped at earlier? Let's interpret: In the algorithm, when we are at i and i equals current_end, it means we have reached the boundary of the range that we could reach with the previous jump. At that moment, we need to make another jump from some point within that range to extend further. The point from which we jump is some index within [previous current_end, i] (actually the algorithm doesn't specify which, but we know we must have been at some index within that range, and we must have stopped there). The number of jumps equals the number of times we need to make such a decision. That is indeed the number of stops+1. So jumps-1 is correct.

    Thus solution is good.

    Now, I'll produce final answer with code.

    But before finalizing, I'd like to test more edge cases:

    Case: D=6, A=[1,1,1,1,1,1]. n=6. Process: i=0: farthest=1, jumps=1, current_end=1 i=1: farthest=max(1,1+1=2)=2, i==1 => jumps=2, current_end=2 i=2: farthest=max(2,2+1=3)=3, i==2 => jumps=3, current_end=3 i=3: farthest=max(3,3+1=4)=4, i==3 => jumps=4, current_end=4 i=4: farthest=max(4,4+1=5)=5, i==4 => jumps=5, current_end=5 (>=5) break. jumps=5 => stops=4. But is that minimal? Actually start 1 -> must stop at each station to move 1 km each time: 0->1 (stop1), 1->2 (stop2), 2->3 (stop3), 3->4 (stop4), 4->5 (destination). So stops=4. So answer 4. Our algorithm yields 4. Good.

    Case: D=6, A=[3,2,1,1,1,1]. Let's compute min stops. Start 3 -> can go up to 3. Could go to index3 directly? 0+3=3, so can jump to index3. From index3 with fuel 1, can go to index4. From index4 with fuel1, can go to index5 (destination). That would be stops at index3 and index4? Actually if we jump from 0 to index3, that's a stop at index3. Then from index3 to index4 (stop at index4) then to destination? Wait from index3 with fuel1 can only go to index4 (since 3+1=4). So we would need to stop at index4 as well. So stops=2. Could we do better? If we go from 0 to index2 (fuel 2) then from index2 can go to index4 (2+2=4) and then from index4 to destination? Actually from index2 with fuel2, can go to index4 (stop? we could go to index4 directly, but then we would need to stop at index4 to refuel? Actually from index2, if we go to index4, we would arrive at index4, which is a station. That would be a stop at index4. Then from index4 with fuel1, can go to destination. So stops: index2 and index4 => 2 stops. Alternatively, go from 0 to index1 (fuel2) then index1-> index3 (2+2=4) then index3-> destination? From index3 fuel1 cannot reach index5 (3+1=4). So would need another stop. So stops=2 or more. So min stops=2. Our algorithm: i=0: farthest=3, jumps=1, current_end=3. i=1: farthest=max(3,1+2=3)=3. i=2: farthest=max(3,2+1=3)=3. i=3: i==3? current_end=3, so i==3 => jumps=2, current_end=farthest=3? Wait farthest is 3, but after updating current_end=3, still not >=5. Actually we need farthest possibly larger later. Continue loop: i=3: before condition, we compute farthest: from i=3, reach=3+1=4, farthest becomes max(3,4)=4. Then i==current_end(3) => jumps=2, current_end=4. i=4: farthest = max(4,4+1=5)=5, i==4? current_end=4, i==4 => jumps=3, current_end=5. So jumps=3 => stops=2? jumps=3 => stops=2. Actually jumps=3, stops=2? Wait jumps - 1 =2. So answer 2. Good.

    So algorithm yields correct.

    Now, think about a tricky case: The greedy algorithm might not always give minimum jumps? For standard Jump Game II, the greedy algorithm (the one we used) is optimal. So fine.

    Now, about input constraints: T up to 10000 and D up to 100000, so total numbers up to 1e9; but such input would be huge (size many GB). Typically sum of D over test cases is limited. But we can't rely on that. However, the problem statement doesn't mention total sum, so it's ambiguous. But most judges would limit total input size to something like 10^6 or 10^7. Our solution will handle each test case one by one, reading lines, so it's fine even for large total, because we read line by line, we don't store all. The time per test case is O(D). If total D is huge, it could be slow, but that's expected.

    Now, I'll code final solution.

    But wait: The problem originally might be from some contest and might have a twist: "At each fuel station his tank is first emptied and then refueled by the amount of fuel that the current fuel station provides." Could it be that he empties the tank before refueling, meaning that if he arrives with some fuel left, he loses it? That's what we used. So it's like resetting fuel to the station's value. So it's exactly a jump.

    Now, what about the fact that the car consumes 1 liter per km. If he has fuel f at a station, he can travel f km. But if he stops at a station, he first empties the tank (i.e., discards any leftover), then refuels. So if he arrives with some leftover, it's wasted. That doesn't affect future because we discard it. So the only thing that matters is the station's fuel amount.

    Thus everything consistent.

    Now, we should consider that maybe the answer is simply the number of times we need to "refuel" which can be found by a greedy approach that always picks the station with maximum fuel among the reachable stations. That is similar to jump game: at each step, we want to jump as far as possible? Actually in jump game II, the optimal strategy is not necessarily to always jump to the farthest position; it's to jump to the position that gives the maximum future reach. But the standard greedy algorithm that chooses to jump when the current range is exhausted and then sets the new range as the farthest reachable from the previous range is optimal. That's what we used.

    Alternatively, we could think: At each stop, he should choose the station within his current fuel that gives the maximum fuel (or maximum i + fuel_i) to maximize future range. That's exactly the greedy.

    But is that always optimal? Yes, because the problem is essentially a shortest path in a graph where each edge has weight 1, and you can jump from i to any j > i with j - i <= A[i]. The greedy BFS (level order) yields the minimum number of jumps. The algorithm we used is essentially BFS in O(n) by tracking the farthest reachable at each level.

    Thus fine.

    Now, final code.

    But note: In the standard algorithm, we loop i from 0 to n-2. Inside, we update farthest. When i == current_end, we increment jumps and set current_end = farthest. However, if current_end already >= n-1 after setting, we can break. Also, we need to consider if at some i, farthest doesn't increase enough and i == current_end, then we might be stuck. But because all A[i] >= 1, farthest will always be at least i+1, so it will eventually reach n-1.

    One more nuance: If D=1, we skip loop and jumps stays 0? Actually we have early return for D<=1, so fine.

    Now, check for D=2: loop i from 0 to 0. i=0: farthest = 0+A[0]. Then i==current_end (0) so jumps=1, current_end=farthest. Then break if current_end >= n-1 (1). So jumps=1 => stops=0.

    Works.

    Now, output formatting: print each answer on a new line.

    Thus done.

    But wait, the sample input: first line T=2, then D=5, then the line with 5 integers, then D=11, then line with 11 integers. Our code reads line by line, so after reading D, we read the next line for numbers. Good.

    Now, what about trailing spaces? fine.

    Thus final answer.

    I'll now produce final answer with explanation.

    But before finalizing, let's test manually with the updated note: Input:

    1 5 4 1 9 1 4

    Our code: T=1, D=5, A=[4,1,9,1,4]. Since D>1, we compute. i=0: farthest=4, jumps=1, current_end=4, break (since >=4). stops=0. Output 0. Good.

    Now, might there be a test case where the initial fuel is enough to go beyond destination? For example, D=5, A=[10, ...]. Then jumps=1, stops=0. Works.

    Now, could there be a scenario where we need zero stops but jumps algorithm gives jumps=1 and stops=0. Good.

    Now, confirm that for D=1, we output 0. That's fine.

    Thus solution is complete.

    Now, I'll write the final answer in proper format with explanation.

    But let's double-check constraints: 1 ≤ N ≤ 1000. This includes all numbers, so initial fuel also between 1 and 1000. So yes.

    Now, let's think about potential integer overflow: None.

    Now, we can also compute answer directly as number of stops without computing jumps: we can set stops = -1 initially? But easier to do jumps-1.

    Now, verify with another scenario: D=3, A=[2,1,1]. n=3. i=0: farthest=2, jumps=1, current_end=2. Since current_end >=2, break. jumps=1 -> stops=0. Indeed initial fuel 2 can go to destination index2 directly. So 0 stops.

    Now, if A=[2,2,1]? Same.

    Now, if A=[2,3,1], i=0: farthest=2, jumps=1, current_end=2. Not break because current_end=2 < n-1=2? Actually n-1=2, current_end=2 >=2 so break. stops=0. Indeed from start can go to index2 directly? 0+2=2, yes can reach index2 (destination). So stops=0. Good.

    Now, if A=[2,0,3] but 0 not allowed, so ignore.

    Now, maybe they intend that the stations are at positions 1..D-1, and the destination is at position D (or D-1)? We already reasoned that D is distance+1, so destination index is D-1.

    But just to be absolutely sure, let's test with a case where D=2 and initial fuel=1. Our algorithm says stops=0. According to problem, if destination is at distance 1 km, he can go directly. So 0 stops, correct.

    Now, consider if D=2, initial fuel=0 (not allowed). So okay.

    Now, think about the note: "For updated Problem Statement

    1

    5

    4 1 9 1 4

    for this input output must be

    0"

    They show input with T=1, D=5, numbers. So output 0.

    All consistent.

    Thus I'll provide solution.

    Now, I will produce final answer.

    But maybe they want us to output the minimum number of stops, which is jumps-1. However, ensure that if jumps is 0 (only when D=1), we output 0.

    Now, final code.

    Potential improvements: Use fast I/O. We'll use sys.stdin.buffer.readline.

    Edge Cases: Sometimes the input might have blank lines. We'll skip them.

    Implementation details:

    def solve(): import sys data = sys.stdin.buffer t_line = data.readline() while t_line.strip() == b'': t_line = data.readline() T = int(t_line) out = [] for _ in range(T): # read D d_line = data.readline() while d_line.strip() == b'': d_line = data.readline() D = int(d_line) # read D numbers nums = [] while len(nums) < D: line = data.readline() # if line is empty, continue? but shouldn't. parts = line.split() if not parts: continue nums.extend(map(int, parts)) A = nums[:D] if D <= 1: out.append('0') continue n = D jumps = 0 cur_end = 0 farthest = 0 for i in range(n-1): reach = i + A[i] if reach > farthest: farthest = reach if i == cur_end: jumps += 1 cur_end = farthest if cur_end >= n-1: break stops = jumps - 1 out.append(str(stops)) sys.stdout.write("\n".join(out))

    Test with sample.

    I'll run mental simulation:

    Sample input as string: "2\n5\n2 15 5 6 2\n11\n1 3 5 8 9 2 6 7 6 8 9\n"

    Reading T=2. Loop first test: D=5. Read line "2 15 5 6 2\n" -> nums = [2,15,5,6,2]. D=5, n=5. Compute stops=1 -> out=['1']. Second test: D=11. Read next line "1 3 5 8 9 2 6 7 6 8 9\n" -> nums list length 11. Compute stops=2 -> out=['1','2']. Output: "1\n2". Good.

    Now, note that there may be multiple test cases and lines may have extra spaces; but our skip blank lines handles that.

    Thus final solution.

    Now, I'll produce the answer with explanation.

    But the problem says "Richard is a travel freak... Help him reach his destination as fast as possible making minimum no of stops". So we output minimum number of stops.

    Thus final answer.

    Wait: I recall that in some similar problems, the answer might be the minimum number of refueling stops, but there is a twist: He must stop before his fuel gets over. That means he cannot run out of fuel; he must stop at a station while he still has fuel left? Actually "before his fuel gets over" might mean he must stop at a station when he still has some fuel left, not after running out. But in our model, if he arrives exactly at a station when his fuel is zero, is that allowed? Since he consumes 1 liter per km, if he travels exactly the distance equal to his fuel, he would arrive with 0 fuel. But does the problem allow that? "Thus he must stop at a fuel station before his fuel gets over." This suggests he must stop before he runs out of fuel, i.e., while he still has some fuel left. So he cannot arrive at a station with zero fuel. However, if he arrives exactly at a station with zero fuel, that would mean he used his last liter to get there, so he arrives with empty tank. Does that count as "before his fuel gets over"? It says "before his fuel gets over", meaning he must stop while he still has fuel, not after it's over. So he should have at least 1 liter left when he stops. But is that enforced? Let's re-read: "Thus he must stop at a fuel station before his fuel gets over." Possibly it's just a narrative: he needs to stop to refuel before he runs out. In typical refueling problems, you can arrive with empty tank because you'd have just run out exactly at the station, but that would be too late? Usually you'd want to arrive with at least some fuel to continue. But here, the process: when he arrives at a station, his tank is first emptied and then refueled. If he arrives with 0 fuel, emptying does nothing, then he refuels. That would be okay, as he hasn't run out on the road; he arrived exactly at the station. But "before his fuel gets over" might mean he must stop while he still has fuel, i.e., he should not run out on the road between stations. That is satisfied if he always ensures that the next station is within his current fuel range. If he arrives exactly with 0, that means he used the last drop to get there, which is allowed because he didn't run out before the station; he arrived at the station precisely when fuel ended. Typically that's considered okay. But the phrase "before his fuel gets over" could be interpreted as he must stop while he still has fuel left, i.e., with >0. However, in the sample, initial fuel=2, he goes to 1st km station, using 1 liter, arrives with 1 liter left. So that's >0. They didn't test the edge case of arriving with 0. But maybe it's not necessary to consider because all numbers are positive, and we can always plan stops such that we arrive with positive fuel? Possibly yes, because we can always stop one step earlier if needed. But if we jump directly from a station to a farther station, we will use exactly the distance between them liters, so we will arrive with 0 if the distance equals the fuel we had. But is that allowed? Let's think: If from station i with fuel f_i, we decide to go to station j such that j-i = f_i, we will arrive exactly when fuel runs out. According to process, we then stop, empty the tank (which is empty) and refuel. That seems fine. But the phrase "before his fuel gets over" might imply you should not let it get over; you should stop while some fuel remains. However, it's ambiguous. Many such problems allow arrival with zero fuel because it's exactly at the station. But to be safe, we should check if the problem expects to consider that case as allowed. Let's look at the note: "He can go 1km with 1 Litre of Petrol." That's all. They don't mention that he must have fuel left. Also in the explanation: "Initially he has 2 litres of fuel, so he can go up to 2Kms. Thus he makes a stop at 1st Km." They didn't consider going to 2nd km directly because that would be at the limit of 2 km, but they chose 1st km. But they could have chosen 2nd km as well? In the sample, they said "Thus he makes a stop at 1st Km." But they didn't say it's mandatory to stop before fuel runs out; they just chose 1st km. But could he have stopped at 2nd km? With 2 liters, he can go to 2nd km, arriving with 0 fuel? Then he would refill with 5 liters. That would also work, and still 1 stop. So both are valid. So arriving with 0 is okay.

    Thus we don't need to enforce >0 arrival.

    Now, all good.

    Now, output must be integer per test case.

    Now, finalize.

    I'll now produce final answer. ```python

    import sys

    def solve() -> None: data = sys.stdin.buffer # read number of test cases, skipping possible blank lines t_line = data.readline() while t_line.strip() == b'': t_line = data.readline() T = int(t_line)

    out = []
    for _ in range(T):
        # read D
        d_line = data.readline()
        while d_line.strip() == b'':
            d_line = data.readline()
        D = int(d_line)
    
        # read the D integers (the whole array)
        nums = []
        while len(nums) < D:
            line = data.readline()
            # if the line is empty (should not happen), just continue
            if not line:
                continue
            parts = line.split()
            nums.extend(map(int, parts))
        A = nums[:D]          # we need exactly D numbers
    
        # if destination is at the start
        if D <= 1:
            out.append('0')
            continue
    
        n = D
        jumps = 0
        cur_end = 0
        farthest = 0
    
        # classic minimum‑jumps greedy algorithm
        for i in range(n - 1):
            reach = i + A[i]
            if reach > farthest:
                farthest = reach
            if i == cur_end:
                jumps += 1
                cur_end = farthest
                if cur_end >= n - 1:
                    break
    
        # number of stops = number of jumps - 1
        stops = jumps - 1
        out.append(str(stops))
    
    sys.stdout.write('\n'.join(out))
    

    if name == "main": solve()