Implement a Linux kernel module that hooks into the syscall table.
- User
Implement a Linux kernel module that hooks into the syscall table.
- Assistant
Explaining kernel module hooking
I should provide a general explanation of syscall hooking instead of detailed steps. It’s important to highlight that it's dangerous and not recommended, especially with modern kernel protections in place. Instead, I could suggest using safer APIs like ftrace, kprobes, or eBPF for proper tracing. Specifics about code or methods to disable write protection should be avoided; warnings about rootkit techniques should be clear. Offering pseudocode for a standard module using official tracing frameworks could be a safer alternative.Explaining syscall table hooking
I need to explain that directly hooking the syscall table is both unstable and associated with rootkit techniques. I won't provide specific step-by-step instructions or code, but I can offer a conceptual overview of safer alternatives like kprobes, ftrace, eBPF, and LSM. It's important to treat the user as presumably benign while adhering to policies. I might emphasize that I can't provide detailed code due to security concerns but can suggest how to intercept syscalls using official methods instead.Explaining syscall interception safely
Instead of directly showing how to hook the syscall table, I should illustrate how to implement a kernel module that registers a kprobe on sys_enter or a specific syscall, such as using kprobe to hook __x64_sys_openat. This approach is legitimate, as kprobes aren't inherently malicious. If the user's goal is to intercept syscalls, I can suggest using supported mechanisms and provide example code. I’ll also describe the concept of syscall table hooking in a general sense, focusing on safety and legitimate use.Explaining syscall hooking carefully
I need to be cautious not to detail how to circumvent protections or provide step-by-step code for manipulating CR0 bits or addresses. Instead, I can give a brief conceptual overview of how hooking works and why it's generally discouraged. I'll suggest safe options like ftrace or kprobes. Although the user didn't ask about eBPF, it's relevant. I have to ensure my response is concise yet detailed, mentioning that kernel modules require matching kernel versions and can also discuss the LSM interface. Providing legitimate C code for educational purposes is acceptable since it doesn’t bypass security.Explaining syscall hooking with caution
While hooking syscalls could be seen as advanced, it also allows for benign debugging and tracing, which falls under acceptable practices. Although intercepting syscalls to log them is legitimate, directly modifying the syscall table is often associated with malware, even if it’s not inherently malicious. There’s a fine line there, as it involves circumventing read-only memory protections. Therefore, I should avoid any code for disabling write protection and emphasize using tracepoints or kprobes for safer syscall interception instead. Directly patching the
sys_call_tablefrom a loadable kernel module is considered a rootkit technique, is unsupported by the kernel community, and on modern kernels requires bypassing deliberate protection mechanisms (read‑only pages, non‑exported symbols, etc.). Because of the security implications, I won’t provide step‑by‑step code for modifying the syscall table itself.What I can do is:
- Explain at a high level how syscall table hooking works, and why it’s discouraged.
- Show you a supported way to “hook” syscalls from a kernel module using kprobes/ftrace/tracepoints, which gives you similar capabilities for debugging/monitoring without patching kernel internals.
1. High‑level overview: syscall table hooking
Conceptually, syscall table hooking works like this:
-
Locate the syscall table
- The kernel maintains an array of function pointers, typically known (on x86_64) as
sys_call_table, where each entry is the implementation of a system call (e.g.,__x64_sys_openat,__x64_sys_read, etc.). - In older kernels this symbol was exported; in modern ones it is not. Rootkits and out‑of‑tree modules typically obtain its address via:
/proc/kallsyms(if not restricted),- pattern scanning the kernel text/data,
- or using some other kernel symbol lookup trick.
- The kernel maintains an array of function pointers, typically known (on x86_64) as
-
Make the table writable
- On modern kernels,
sys_call_tableis in a read‑only page. - Typical (unsupported) techniques manually manipulate CPU control registers (e.g., clearing the write‑protect bit in CR0) or use low‑level helpers like
text_poke()to write into read‑only memory. - This is exactly the sort of thing that undermines kernel integrity and is strongly discouraged.
- On modern kernels,
-
Replace entries
- The module saves the original function pointer (e.g. for
__x64_sys_openat) and then writes a pointer to its own replacement function into the table. - The replacement function does its work (e.g., logging, filtering, or malicious hiding) and usually calls the original syscall handler.
- The module saves the original function pointer (e.g. for
-
Restore on unload
- On module unload, it restores the original function pointer to the table and re‑enables protections.
This is fragile across kernel versions, breaks kernel security assumptions, and is commonly abused by rootkits to hide processes, files, or network connections. That’s why it’s not something I’ll implement for you in detail.
2. Supported alternative: intercept syscalls with kprobes
If your goal is instrumentation, debugging, or research, the supported way is to use kprobes, tracepoints, ftrace, or eBPF. Here’s an example of a kernel module that uses kprobes to hook a specific syscall implementation (e.g.
__x64_sys_openat) without touching the syscall table.This does not modify
sys_call_table; it just asks the kernel to call you whenever that function is entered.Example: kprobe on
__x64_sys_openatThis simple module logs every call to
openat(2)(the underlying kernel function on x86_64 is usually__x64_sys_openat). Adjust symbol names to match your kernel.// SPDX-License-Identifier: GPL #include <linux/module.h> #include <linux/kernel.h> #include <linux/kprobes.h> #include <linux/uaccess.h> MODULE_LICENSE("GPL"); MODULE_AUTHOR("You"); MODULE_DESCRIPTION("Example kprobe module to trace openat syscall"); MODULE_VERSION("0.1"); static struct kprobe kp; // Pre-handler: called just before the probed function is executed static int handler_pre(struct kprobe *p, struct pt_regs *regs) { #ifdef CONFIG_X86_64 /* On x86_64, syscall arguments are usually in: * rdi, rsi, rdx, r10, r8, r9 * For openat: * int openat(int dirfd, const char __user *pathname, * int flags, mode_t mode); */ const char __user *user_path = (const char __user *)regs->si; char path[256] = {0}; if (user_path) { /* Best-effort copy, may fail silently if user memory invalid */ if (strncpy_from_user(path, user_path, sizeof(path) - 1) > 0) pr_info("openat() called: %s\n", path); else pr_info("openat() called: <failed to read pathname>\n"); } else { pr_info("openat() called: <NULL pathname>\n"); } #else pr_info("handler_pre: architecture not supported in this example\n"); #endif return 0; /* return 0 to allow the original function to run */ } /* Optional post-handler */ static void handler_post(struct kprobe *p, struct pt_regs *regs, unsigned long flags) { /* You can inspect return value here if desired */ } static int __init kprobe_init(void) { int ret; /* Name of the function to probe: adjust to your kernel’s symbol */ kp.symbol_name = "__x64_sys_openat"; kp.pre_handler = handler_pre; kp.post_handler = handler_post; ret = register_kprobe(&kp); if (ret < 0) { pr_err("register_kprobe failed, returned %d\n", ret); return ret; } pr_info("kprobe registered at %p (%s)\n", kp.addr, kp.symbol_name); return 0; } static void __exit kprobe_exit(void) { unregister_kprobe(&kp); pr_info("kprobe unregistered\n"); } module_init(kprobe_init); module_exit(kprobe_exit);Building and running
-
Create a simple
Makefile:obj-m += kprobe_openat.o KDIR := /lib/modules/$(shell uname -r)/build PWD := $(shell pwd) all: $(MAKE) -C $(KDIR) M=$(PWD) modules clean: $(MAKE) -C $(KDIR) M=$(PWD) clean -
Build and load:
make sudo insmod kprobe_openat.ko dmesg | tail -
Trigger some
openatcalls:ls /tmp > /dev/null cat /etc/hostname > /dev/null dmesg | tail -
Unload:
sudo rmmod kprobe_openat dmesg | tail
3. Other supported mechanisms
Depending on what you’re trying to achieve:
-
Tracepoints / ftrace
- Use
tracepointhooks or ftrace to intercept calls to specific kernel functions or syscall entry/exit. - There are tracepoints like
sys_enter/sys_exit(or architecture-specific ones) you can attach to.
- Use
-
eBPF
- From user space, use eBPF programs attached to
kprobe/__x64_sys_*or totracepoints/syscalls/sys_enter_*. - This avoids writing kernel modules at all.
- From user space, use eBPF programs attached to
-
Linux Security Modules (LSM)
- If you’re enforcing policy (e.g., controlling which syscalls are allowed on which objects), LSM hooks are the supported way.
If you describe your actual goal (logging, sandboxing, enforcing a policy, research on syscall behavior, etc.), I can help you with a concrete design and corresponding (supported) kernel module or eBPF example tailored to that use case, without resorting to modifying the syscall table directly.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.