Skip to content
TheChatArchiveThe Chat Archive
DeepSeekDeepseek v3.2· deepseekHugging Face Frontier Reasoning Traces

You are given two strings s and t both of length n and both consisting of lowercase…

  1. User

    You are given two strings s and t both of length n and both consisting of lowercase Latin letters.

    In one move, you can choose any length len from 1 to n and perform the following operation:

    • Choose any contiguous substring of the string s of length len and reverse it;
    • at the same time choose any contiguous substring of the string t of length len and reverse it as well.

    Note that during one move you reverse exactly one substring of the string s and exactly one substring of the string t.

    Also note that borders of substrings you reverse in s and in t can be different, the only restriction is that you reverse the substrings of equal length. For example, if len=3 and n=5, you can reverse s[1 ... 3] and t[3 ... 5], s[2 ... 4] and t[2 ... 4], but not s[1 ... 3] and t[1 ... 2].

    Your task is to say if it is possible to make strings s and t equal after some (possibly, empty) sequence of moves.

    You have to answer q independent test cases. Input

    The first line of the input contains one integer q (1 ≤ q ≤ 10^4) — the number of test cases. Then q test cases follow.

    The first line of the test case contains one integer n (1 ≤ n ≤ 2 ⋅ 10^5) — the length of s and t.

    The second line of the test case contains one string s consisting of n lowercase Latin letters.

    The third line of the test case contains one string t consisting of n lowercase Latin letters.

    It is guaranteed that the sum of n over all test cases does not exceed 2 ⋅ 10^5 (∑ n ≤ 2 ⋅ 10^5).

    Output

    For each test case, print the answer on it — "YES" (without quotes) if it is possible to make strings s and t equal after some (possibly, empty) sequence of moves and "NO" otherwise.

    Example

    Input

    4 4 abcd abdc 5 ababa baaba 4 asdf asdg 4 abcd badc

    Output

    NO YES NO YES

  2. DeepSeek Assistant

    We need to analyze the problem. We have two strings s and t of length n. In one move, we pick any length len (1 <= len <= n) and then choose a contiguous substring of s of length len and reverse it; simultaneously, we choose a contiguous substring of t of length len and reverse it. The substrings can be at different positions; only their lengths must be equal.

    We need to determine if we can make s and t equal after some moves.

    Observations: This is a kind of simultaneous operation on two strings. It allows us to reverse any substring of s and any substring of t of same length. Effectively, we can perform independent reversals on each string, but the lengths of the reversed substrings must be the same in a move. However, we can combine moves. Since we can choose any len each move, we can simulate a sequence of operations: we can reverse any substring of s of any length, but we must pair it with a reversal of same length on t. That seems to couple the operations.

    But we could think of the allowed transformations on the pair (s, t). The goal is to get s == t. Equivalent to: can we transform s into t using operations that act symmetrically on both strings? But we can also use moves that change both strings. Actually both strings can be altered. The moves allow us to modify both strings simultaneously. The question is whether there exists a sequence such that finally s equals t.

    We can think of the process as: we have two strings; we can apply operations that reverse a substring of each of same length. This is similar to having the ability to perform independent reversals on each string, but with a constraint that the lengths of reversed segments in the same move must be equal. However, since we can use multiple moves, we could perform any reversal on s alone, but only if we also perform a reversal of same length on t at the same time. But we can also later undo/compensate the effect on t by additional moves. So the constraint may not be too restrictive. Perhaps the only invariant is the multiset of characters? Or maybe parity of some permutations? We need to find necessary and sufficient condition.

    Let's try to understand what transformations can be achieved.

    We can reverse any substring of s of length L, provided we also reverse some substring of t of length L. In isolation, that will change both strings. If we want to bring s and t to equality, we can think of it as we want to transform s and t into the same string, say some target string x. We can manipulate both strings. Essentially we have two copies, and we can perform simultaneous reversals (same length) on both. The question is: can we drive them to the same string? Equivalent to: can we make s and t equal by applying the same "type" of operation to both? Not exactly same operation, because positions can differ.

    Alternatively, we can think about the difference between s and t. But maybe we can characterize the ability using the fact that reversals generate the full symmetric group (any permutation) on each string, because reversing any substring (or a set of reversals) can generate any permutation? Actually reversals on a string are not sufficient to generate arbitrary permutations; they generate the whole symmetric group only if we allow reversals of arbitrary substrings? Let's check: The group generated by reversals of contiguous substrings on a line of positions is the entire symmetric group? Actually, any permutation can be expressed as a product of reversals of adjacent swaps? Reversals are like reversing a segment, which is a more powerful operation than adjacent swaps. But known result: The set of all reversals generates the symmetric group. Because we can swap any two positions by a series of reversals? For example, to swap positions i and j (i<j), we can reverse [i,j] (makes s[i] and s[j] swap? Actually reversing [i,j] will put s[i] to position j and s[j] to position i, and reverse the order of the middle. That's not exactly a transposition; it's a reversal. But you can achieve a transposition of two positions by a series of reversals? Possibly yes, because reversals can simulate adjacent swaps: reversing a length-2 segment is just swapping two adjacent characters. So reversal of length 2 is a swap of adjacent positions. And adjacent swaps generate the whole symmetric group. Therefore, using reversals of length 2 (i.e., swapping adjacent positions) we can generate any permutation on a single string. However, the constraint is that we must perform the same-length reversal on the other string simultaneously. So if we want to swap adjacent characters in s, we need to also swap adjacent characters in t (somewhere) of length 2 at the same time. So effectively, we can perform an adjacent swap on s and simultaneously an adjacent swap on t (maybe at different positions). That's allowed.

    Thus, we can think of the operation as: we can apply any transposition that is a product of a reversal (of length L) on s and a reversal (of length L) on t, but they can be at different positions. But we can also combine moves. So perhaps the only invariant is the multiset of characters in s and t? Because we can rearrange both strings arbitrarily? Let's check: Can we rearrange s arbitrarily using these moves while also making some changes to t? Suppose we want to permute s into some order, we can use adjacent swaps on s, but each adjacent swap must be accompanied by an adjacent swap on t. If we don't care about t, we could just perform extra swaps on t that may be undone later. But we need to ensure that we can bring t to the same as s at the end. So perhaps we can think of it as we have two strings, and we can apply any permutation to each, but with the condition that the total number of moves of each length? But we are not counting moves; we can apply any number. So it seems plausible that we can rearrange both strings arbitrarily, as long as they have the same multiset of characters, we can eventually make them equal. But is that sufficient? Let's test with sample: case1: n=4, s=abcd, t=abdc. Multisets are both {a,b,c,d} same. But answer is NO. So it's not just multiset equality.

    Let's examine case1: s = a b c d, t = a b d c. They differ by swap of c and d at positions 3 and 4. We could try to make them equal. Could we? They say NO. So something else.

    Case4: n=4, s=abcd, t=badc. Multisets same, answer YES. So why one works and the other doesn't? Possibly parity? Or the ability to match positions? Let's examine operations: we can reverse substrings in both simultaneously. Maybe there is an invariant related to the relative order of characters? Or the permutation that maps s to t? Let's compute the permutation that takes s to t. For case1: s: positions 1:a,2:b,3:c,4:d; t: 1:a,2:b,3:d,4:c. So the permutation π such that s[i] = t[π(i)]? Actually if we want to transform s into t, we can think of rearranging s to match t. In case1, we need to swap positions 3 and 4 in s. That is a single transposition, which is an odd permutation (if n=4). For case4: s=abcd, t=badc. To transform s to t, we need to map s1->t2 (a goes to position 2), s2->t1 (b to position 1), s3->t4 (c to position 4), s4->t3 (d to position 3). This is permutation: (1 2)(3 4) two swaps, which is even (since two transpositions, parity even). But we can also consider we are allowed to change both strings, not just one. So parity on a single string may not be invariant because we also change t.

    Maybe there is an invariant related to the overall permutation of the concatenated string? Or the parity of the total number of inversions across both strings? Let's think.

    Observing that operation reverses a substring in s and a substring in t of same length. This is like applying the same "reversal" transformation to both strings, but at potentially different positions. Reversal is an operation that is its own inverse, and its parity as a permutation: reversing a substring of length L corresponds to a permutation that is a reversal of that segment. The parity of a reversal: reversing a segment of length L is a permutation that consists of floor(L/2) swaps. So its sign is (-1)^{floor(L/2)}. Actually, the number of inversions changed? But the sign of the permutation (as an element of symmetric group) depends on the number of transpositions needed to represent it. Reversing a segment of length L: we swap positions i and i+L-1, i+1 and i+L-2, etc. So there are floor(L/2) transpositions. So sign = (-1)^{floor(L/2)}. So reversal is even if floor(L/2) is even, odd if floor(L/2) is odd.

    Now, when we apply a move, we simultaneously apply a reversal of length L on s (at some positions) and a reversal of length L on t (at some positions). The effect on the pair (s,t) can be seen as a permutation on the combined set of positions? But s and t are separate strings; we can think of them as two separate sequences. However, we care about equality; eventually s and t must be same string. Could we think in terms of transforming the pair (s,t) into (x,x)? The allowed moves are: for any L, choose indices i and j (starting positions of substrings in s and t, maybe also boundaries), then apply reversal on s[i..i+L-1] and reversal on t[j..j+L-1]. These are independent operations on the two strings, but the length L must be same.

    Thus, the group generated by such moves on the product space (S_n)^2? Actually each string is an array of characters. The moves act by applying a reversal to each string. They are not necessarily applied synchronously in terms of positions.

    We might ask: given two strings, can we make them equal? This is equivalent to whether there exists a sequence of moves that, when applied, result in s=t. That is like: we can apply arbitrary reversals to s as long as we also apply reversals of same length to t. So essentially, we are allowed to change s arbitrarily via reversals, but we must "pay" by also applying some reversals to t. But we can also apply moves that "undo" changes to t later. So the question reduces to: can we transform s into t using only moves that change s and t simultaneously but in a way that net effect on t is something that brings it to s? Possibly we can think of the problem as: is there a sequence of moves that results in both strings being the same? That's same as: can we apply a sequence of moves such that after the sequence, the two strings are equal. This is a reachability problem.

    Maybe we can think in terms of equivalence relation: the operation is reversible (since reversal is its own inverse). So the set of reachable states from (s,t) is an orbit under the group generated by moves. We need to know if (s,t) is in the same orbit as some (x,x). Equivalently, does there exist an element (x,x) in the orbit? That means the orbit contains a state where the two strings are equal. Since the operation is reversible, we can consider the equivalence classes. If we can find an invariant that distinguishes states that cannot reach a double-equal state, that gives condition.

    Potential invariants: For each character, the multiset is clearly preserved in each string individually? Actually, reversals preserve the multiset of characters in each string because it's just reordering. So each string's multiset of characters remains unchanged throughout. So for s and t to become equal, it is necessary that the multisets of s and t are the same (since final strings are equal, they have the same multiset; initial s and t have same multisets as final? Wait: operations on s only reorder its characters, so the multiset of s is invariant. Similarly for t. So if we want to reach a state where s = t, then the multiset of s and the multiset of t must be equal to each other (because final s and final t are same string, so they have same multiset). Initially, s and t may have different multisets? But they are given. If initially multisets differ, impossible. So necessary condition: multiset(s) = multiset(t). That's easy.

    In the samples, both case1 and case4 have same multisets, but case1 is NO, case4 YES, so additional condition.

    Another invariant: Maybe the parity of the permutation that transforms s to t (or something) modulo something is invariant? Let's examine the effect of a move on the pair (s,t). Suppose we represent the strings as permutations of the multiset? Since characters can repeat, it's trickier.

    If all characters are distinct, then each string is a permutation of the set of distinct letters. The operation reverses a substring, which is a permutation of positions. So we can think of s and t as permutations of the same set of items (since multisets equal and distinct). Then making s and t equal means we want to transform s and t to the same permutation. Since operations apply independent reversals to each, the question becomes: given two permutations π and σ of {1..n} (representing ordering of items), can we apply reversals to both (with same length each time) to turn them into the same permutation? Equivalent to: is there a sequence of reversals such that applying some reversals to π and some reversals to σ (with lengths matched) yields the same permutation? That is same as: does there exist a permutation τ such that by applying some reversals to π we get τ, and by applying some (possibly different) reversals to σ we also get τ, with the constraint that the lengths of reversals used in each step must be matched across the two strings in each move.

    But note: the moves are simultaneous: in each move we apply a reversal to π and a reversal to σ of same length. So the sequences for π and σ are interleaved and must have same length at each step, but the lengths chosen for each step can be independent. This means we can think of two sequences of reversals: R1, R2, ..., Rk applied to π; and S1, S2, ..., Sk applied to σ; with the condition that for each i, the length of Ri equals the length of Si. The order matters? But we can reorder moves; they are applied simultaneously in pairs. The net effect on π is the composition of Ri's in order; on σ is composition of Si's. The constraint is that the list of lengths of Ri equals list of lengths of Si. So the lengths sequences must match.

    Thus, the question: given π and σ, does there exist two sequences of reversals (with lengths) such that the lengths sequences are equal and the final permutations are equal? Equivalent to: can we transform π into σ by applying some sequence of moves where each move consists of applying a reversal to π and a reversal to σ, but we want them to end up equal? That's like: we want to find a permutation τ such that π can be transformed to τ by some reversals, and σ can be transformed to τ by some reversals, but the lengths sequences for these transformations must be the same (i.e., we can interleave them as moves). However, we can always first transform π to τ using some reversals, and simultaneously we must apply some reversals to σ of same lengths; but those reversals on σ may not transform σ to τ. We need to coordinate.

    Alternative viewpoint: Since moves are reversible, we can consider the equivalence relation: (s,t) ~ (s',t') if there is a sequence of moves connecting them. Then we ask if (s,t) ~ (x,x) for some x. Because the operation is symmetric, maybe we can think of the combined state as a difference between s and t. Consider the relative order between s and t.

    Another approach: Could it be that the only obstacle is when n is small? But no.

    Let's experiment with small n to see patterns.

    For n=1: always YES, because s and t are single characters. If they are equal, already; if not, but multisets must be same => characters must be equal, so yes.

    For n=2: strings of length 2. s = ab, t = ba. Multisets same. Can we make them equal? Moves: we can choose len=1: reverse substring of length 1 (does nothing). So effectively len=1 moves do nothing. Len=2: reverse whole string. So we can reverse s and/or t, but must be same length. If we reverse both entire strings (len=2): s becomes ba, t becomes ab. So after one move, s=ba, t=ab. They are still not equal. If we reverse s alone? Not allowed; we must also reverse t of len=2. So possibilities: (1) no move: (ab,ba). (2) reverse both: (ba,ab). (3) reverse both twice: back to (ab,ba). So cannot make them equal. So for n=2, s=ab, t=ba => NO? Let's test if sample has something like that? Not directly. But we can check if there is any other operation: len=1 does nothing. So indeed we cannot make them equal. So multiset equality not sufficient. What's special? The permutation needed to turn s into t is a single swap (odd). For case1, n=4, s=abcd, t=abdc: that's a swap of adjacent (positions 3-4) - odd. For case4, s=abcd, t=badc: that's two swaps (1-2) and (3-4) - even. So parity may matter.

    But also note that we have two strings, and the moves apply reversals to both. Each reversal is a permutation on its string; its parity is determined by floor(L/2). When we apply a move, we apply two reversals (one on s, one on t) of the same length L. So the combined effect on the pair (s,t) can be considered as applying an even total permutation? Not exactly; we apply one reversal on each string, each with sign (-1)^{floor(L/2)}. But the sign for s and t individually are the same (since length same). So each move changes the parity of both s and t equally? Actually, if we consider the parity of the permutation applied to s relative to its current ordering, and similarly for t. If we define the parity of the permutation from the original string to the current string, then each reversal on s toggles its parity if floor(L/2) is odd. Similarly for t. So each move toggles parity of both s and t simultaneously if L has floor(L/2) odd? Actually if floor(L/2) is odd, the reversal is an odd permutation, so applying it changes the parity of the string's permutation (from identity). So after a move, the parity of s and t each may change by the same amount (since they undergo same-length reversal). So the parity difference between s and t? Let's define: let p_s be the parity (sign) of the permutation that transforms the original s into current s. Similarly p_t. Initially, p_s = 0 (even) because it's identity relative to itself, but that's not helpful. Actually we care about ability to reach equality. Better: Consider the parity of the permutation that maps s to t. Because if we can make s = t, then the permutation from original s to original t must be something that can be "canceled" by moves. Let's derive invariants.

    Let’s assume for a moment that all characters are distinct. Then we can label items 1..n. Let's represent the strings as permutations of these items. For simplicity, consider the initial s as the identity permutation [1,2,...,n] (by relabeling items according to s). Then t becomes some permutation π (since t is a permutation of the same items). Our goal is to apply moves to both strings to reach a common permutation τ. The moves: we can apply any reversal to the identity permutation (s) and simultaneously apply any reversal (same length) to π (t). After a sequence, s becomes some permutation σ (result of applying reversals to identity), and t becomes some permutation ρ (result of applying reversals to π). We want σ = ρ.

    Now, note that applying a reversal of length L to a permutation corresponds to multiplying on the left (or right?) by that reversal permutation. Since we start with identity for s, after applying reversals R_k ... R_1 (applied in order), s becomes R_k ... R_1 (if we consider permutations as acting on positions? We need to be careful: Usually, applying a reversal to a string corresponds to permuting the positions of characters. If we start with identity arrangement (1,2,...,n), and we reverse the substring from i to i+L-1, the new arrangement becomes (1,..., i-1, i+L-1, ..., i, i+L, ..., n). This is like applying a specific permutation r (which depends on i and L). So after a series of reversals, the s permutation is r_m ... r_1 (where each r_j is the reversal permutation). Similarly, t starts as π, and we apply reversals s_j to it: t becomes s_m ... s_1 ∘ π? Or the order depends: if we apply reversal to t, it's also left multiplication? Let's define: When we have a current permutation P (mapping positions to items), and we reverse a contiguous segment, we are applying a permutation to the positions: effectively, if we consider the array as list of items, reversing the segment corresponds to applying a permutation that reverses that segment. So new array = r * P? Usually, if we think of P as a list (a function from index to item), applying reversal r (which is a permutation of indices) gives the new list: at index i, we place the item that was at index r^{-1}(i)? But reversal is its own inverse: r = r^{-1}. If we define r as the operation that sends indices to new indices: after reversal, the item originally at position j moves to position r(j). So the new list L' is such that L'[r(j)] = L[j], i.e., L' = L composed with r? Let's set up clearly.

    Let the current string be an array A[1..n]. After reversing subarray from a to b, we get new array B where B[a..b] = reverse(A[a..b]), and B[i]=A[i] elsewhere. This is equivalent to applying a permutation ρ on the positions: B[i] = A[ρ(i)] where ρ is the reversal permutation: ρ(i) = i if i not in [a,b]; ρ(i) = a+b-i if i in [a,b]. Note that ρ is an involution: ρ = ρ^{-1}. So we can write B = A ∘ ρ (if we view A as a function from index to character). Actually if we think of A as a tuple, then after applying reversal, the new tuple is A permuted by ρ, i.e., B[i] = A[ρ(i)]? Check: For i in [a,b], we want B[i] = A[a+b-i]. Since ρ(i) = a+b-i, then B[i] = A[ρ(i)]. For i outside, ρ(i)=i, so B[i]=A[i]. So indeed B = A ∘ ρ, where composition means indexing: (A ∘ ρ)(i) = A[ρ(i)]. So applying the reversal corresponds to right-composing by ρ (or left? It depends on notation). But we can treat permutation as acting on indices from the right.

    If we have a sequence of reversals ρ1, ρ2, ..., ρk applied in that order (each reversal is applied to the current array), then the final array is A ∘ ρ1 ∘ ρ2 ∘ ... ∘ ρk? Let's verify: Start with A0. After first reversal ρ1, we get A1 = A0 ∘ ρ1. After second reversal ρ2, we get A2 = A1 ∘ ρ2 = (A0 ∘ ρ1) ∘ ρ2 = A0 ∘ (ρ1 ∘ ρ2)? Since composition of functions: (A0 ∘ ρ1) ∘ ρ2 = A0 ∘ (ρ1 ∘ ρ2) if we interpret composition correctly: (A0 ∘ ρ1)(i) = A0[ρ1(i)], then applying ρ2 gives A2(i) = A1[ρ2(i)] = A0[ρ1(ρ2(i))] = A0[(ρ1 ∘ ρ2)(i)]. So indeed A_k = A0 ∘ (ρ1 ∘ ρ2 ∘ ... ∘ ρk). So the overall permutation applied to indices is the composition of the reversals in order: P = ρ1 ∘ ρ2 ∘ ... ∘ ρk. Since each ρ is its own inverse, but composition may be complicated.

    Thus, starting with identity permutation (where A0[i] = i if we map items to numbers), after applying reversals, we get permutation P (as a mapping from positions to items) = composition of reversals (since A = identity ∘ P = P). So s becomes permutation P. Starting with t as permutation π (so initial array = π), after applying reversals σ1, σ2, ..., σk, we get final array = π ∘ (σ1 ∘ ... ∘ σk). We want P = π ∘ Σ, where Σ = σ1 ∘ ... ∘ σk. So we want P = π ∘ Σ => Σ = π^{-1} ∘ P. Since π, P, Σ are permutations.

    Now, the constraint: the lengths of the reversals used in s and t must match pairwise: for each i, len(ρ_i) = len(σ_i). That is, the sequence of reversal lengths for s is the same as for t. However, note that the positions (starting indices) can differ, so the actual reversal permutations can be different but they have same length. So the constraint is on the multiset? Actually sequence of lengths must be identical in order.

    But perhaps we can reorder moves? Since moves are applied in order, we cannot reorder arbitrarily because composition is not commutative. But maybe we can simulate any pair of sequences with same length multiset by inserting extra moves that cancel? Or maybe the constraint on lengths is not restrictive if we allow extra dummy moves (len=1) which do nothing. len=1 reversal is identity (since reversing a single char does nothing). So we can pad sequences with identity moves. So we can always make sequences have same number of moves, but the lengths must match per move. So we need to find sequences of reversals ρ_i and σ_i such that (1) the lengths match: for each i, |ρ_i| = |σ_i| (where |ρ| is the length of the reversed segment), and (2) P = π ∘ Σ, where P = composition of ρ_i's, Σ = composition of σ_i's.

    Equivalently, we want to find two sequences of reversals (with matched lengths) such that Σ = π^{-1} ∘ P.

    Now, note that the set of reversals generates the symmetric group. Moreover, any permutation can be expressed as a product of reversals. However, the parity of the number of reversals used might matter? But we can use any number. Also each reversal has a sign: sign(ρ) = (-1)^{floor(L/2)}. So the sign of a reversal is determined solely by L, independent of its position.

    Therefore, the sign of a product of reversals is the product of signs, which is (-1)^{sum floor(L_i/2)}. So the parity (sign) of a permutation expressed as a product of reversals is determined by the parity of the total number of reversals of each length? Actually it's sum of floor(L_i/2) mod 2.

    Now, for our sequences ρ_i and σ_i, we have constraints that for each i, L_i (length of ρ_i) equals M_i (length of σ_i). So the lengths are identical. Therefore, the parity contributions from each pair are the same: floor(L_i/2) = floor(M_i/2). Thus, the total parity of P (i.e., sign(P)) equals the product of sign(ρ_i) = (-1)^{∑ floor(L_i/2)}. Similarly, sign(Σ) = (-1)^{∑ floor(M_i/2)} = same exponent. So sign(P) = sign(Σ). Because the exponents are equal. Thus, sign(P) = sign(Σ).

    Now, we want P = π ∘ Σ. Taking signs: sign(P) = sign(π) * sign(Σ). Since sign(P) = sign(Σ), we get sign(Σ) = sign(π) * sign(Σ) => sign(π) = 1 (even). So we must have sign(π) = even. That is, the permutation that maps s to t (or t to s) must be even.

    In the case of distinct characters, this gives a necessary condition: the permutation from s to t must be even. Is it also sufficient? Possibly yes, given we can generate any even permutation using reversals with certain length parity constraints? But we also need to match lengths sequence exactly between the two sequences. We have sign(P)=sign(Σ) always. If π is even, then sign(P)=sign(Σ) and the equation P = π ∘ Σ has solutions if we can find any P and Σ with same sign and also the product condition. Since we have complete freedom to choose sequences, we might be able to achieve any P and Σ with same parity? Actually we can realize any permutation as a product of reversals. However, the lengths sequence for P and Σ must match pairwise. This is more restrictive: we need two sequences of reversals (with matched lengths) whose products are P and Σ respectively. But we can choose the sequences arbitrarily. For any given P and Σ, can we find reversal sequences with the same length multiset (in order) that produce them? That seems nontrivial.

    But maybe we can construct a simpler process: we can aim to make s and t equal by focusing on aligning characters gradually. Another insight: the operation allows us to "swap" two characters in one string while swapping two characters in the other string, but they must be swapped using reversals of length 2 (adjacent swap). That is, if we perform a len=2 reversal on s at positions i,i+1, we swap s_i and s_{i+1}. Simultaneously we must perform a len=2 reversal on t at some positions j,j+1, swapping t_j and t_{j+1}. So we have the ability to perform an adjacent swap on s and an adjacent swap on t in the same move. We can also perform longer reversals which are compositions of swaps. So essentially, we can perform any even permutation on s and any even permutation on t simultaneously? But because we can also apply len=1 moves (do nothing), we can also do sequences where we apply an odd number of swaps on one side if we also apply an odd number of swaps on the other side? Let's analyze parity.

    If we apply a len=2 reversal, it is a single adjacent swap, which is an odd permutation (since a transposition is odd). So applying a len=2 reversal toggles parity of the string. So if we apply a len=2 move to both s and t, both toggles parity. So parity of each string changes simultaneously. So the parity difference between s and t (i.e., parity(s) XOR parity(t) maybe) remains invariant? Let's define parity(s) as the sign of the permutation from original s to current s. Initially, parity(s)=0 (even). parity(t)=? But we consider relative parity between s and t? Actually, we want to reach state where s = t. At that state, the parity of both strings relative to their origin? Not necessarily equal; they could be different. But we can consider the relative permutation from s to t. Let's define permutation τ such that current s = current t ∘ τ? Not sure.

    Better: Let’s think in terms of the "relative ordering" between s and t. Consider the combined string? Another approach: Since we can apply reversals on both strings, we can think of applying the same reversal to both strings at possibly different positions. Could we simulate a swap of two adjacent characters in s without affecting t? Possibly by using a more complex sequence: for instance, we could swap two characters in s using a len=2 reversal on s, but we must also apply a len=2 reversal on t. To cancel the effect on t, we could later apply another len=2 reversal on t to revert it. But that would be two moves: first move (swap s_i,i+1, swap t_j,j+1); second move (some other swap on s? to keep net effect on s as only one swap, we might need to also do something on s). Could we achieve a net single adjacent swap on s while leaving t unchanged? Suppose we do move1: swap s at i,i+1; swap t at j,j+1. Then move2: swap s at i,i+1 again (undoing it) and swap t at j,j+1 again (undoing). Net effect zero. So not good.

    What about using longer reversals? A reversal of length L has parity determined by floor(L/2). So we can produce an odd permutation on s alone by using a reversal of length L where floor(L/2) is odd, while simultaneously applying a reversal of same length on t. The net effect on t also toggles parity. So the parity of each string changes in sync. Thus, the parity of the permutation from the initial s to current s, and from initial t to current t, will always be equal? Let's check. Initially, both s and t have identity relative to themselves? But we define parity relative to fixed reference? Better: Define the permutation that transforms the original s into current s (call it σ_s). Similarly, σ_t for t. At start, σ_s = identity (even), σ_t = identity (even). When we apply a move with reversal length L, we apply a reversal (some permutation r) to s and a reversal r' to t (with same length L). The sign of r is (-1)^{floor(L/2)} = sign(r'). So σ_s becomes r ∘ σ_s (or σ_s ∘ r? depending on order; but sign composition will be multiplied by sign(r)). Similarly σ_t becomes r' ∘ σ_t. So both are multiplied by a permutation of the same sign. Since sign(r) = sign(r'), the parity of σ_s and σ_t both get multiplied by the same factor. Initially they are both even. So after any number of moves, sign(σ_s) = sign(σ_t). Because at each step, both are multiplied by same sign factor, so they remain equal. So invariant: the parity of the permutation from original s to current s equals the parity of the permutation from original t to current t. (Both evolve identically in terms of sign.) So sign(σ_s) = sign(σ_t) always.

    Now, if at final state s = t, then the current strings are equal. But that does not directly impose condition on initial s and t. However, we can consider the relative permutation between initial s and initial t. Let π be the permutation such that t = π(s) (if we treat items distinct). Since we can reorder both strings, maybe we can compute the parity condition.

    We have initial s and t. We can apply moves to reach a common string x. Let the final permutation from initial s to x be P (so x = P(s)). And final permutation from initial t to x be Q (so x = Q(t)). Then P(s) = Q(t) => t = Q^{-1}(P(s)). But initially t is given. If we treat s as identity (by relabeling), then t = π (some permutation). So we have π = Q^{-1} ∘ P. Then sign(π) = sign(Q^{-1}) * sign(P) = sign(Q) * sign(P) because sign(Q^{-1}) = sign(Q). Now, we also have from invariant: Since we applied moves to s, the parity of P is equal to the parity of the sequence of reversals applied to s. Similarly, Q's parity equals the parity of the sequence of reversals applied to t. But the moves are paired: each step applies a reversal to s and a reversal to t of same length, so each step contributes same sign factor to both σ_s and σ_t. Therefore, throughout, the parity of the permutation applied to s (relative to original) equals the parity of the permutation applied to t. Since initially both are identity, after the moves, sign(P) = sign(Q). Because each move multiplies both by same sign factor, so they stay equal. Indeed, from the invariant sign(σ_s)=sign(σ_t) at all times, at the end we have σ_s = P (since s becomes P(s)) and σ_t = Q (since t becomes Q(t)). So sign(P) = sign(Q). Then sign(π) = sign(P) * sign(Q) = (sign(P))^2 = 1 (even). So π must be even. This matches earlier derivation. So necessary condition: the permutation mapping s to t (when all characters distinct) is even.

    But in our problem, characters can repeat. Then we can't define a unique permutation; many mappings. However, we might consider the parity of the number of inversions modulo 2 between s and t after matching identical characters appropriately? For strings with repeated characters, the necessary and sufficient condition might be: after sorting, the multiset equality holds, and additionally, there exists some matching of characters such that the permutation parity is even, or maybe it's always possible unless there is a specific condition like there is a character appearing more than once? Actually, if there are repeated characters, parity can be ambiguous because we can map identical letters to each other in different ways. So the condition may relax: if there is any duplicate character, we can possibly achieve the transformation regardless of parity? Let's test sample: case2: n=5, s=ababa, t=baaba. Let's count characters: s: a:3, b:2; t: a:3, b:2. So multiset matches. Answer is YES. In this case, is there any parity issue? Since characters repeat, we might be able to use the duplicates to adjust parity. case3: n=4, s=asdf, t=asdg. Strings: asdf vs asdg. Multisets: s: a,s,d,f; t: a,s,d,g. Not same (f vs g), so answer NO. So that fails multiset condition. case4 we already saw YES. So need to test: what about case1? s=abcd, t=abdc. All distinct. Permutation from s to t is a single adjacent transposition (swap c,d), which is odd -> NO. So that matches parity condition.

    But are there examples with distinct characters and even permutation that is YES? case4 is distinct and even -> YES.

    Now, we should also consider case where n=2 distinct characters: s=ab, t=ba (odd) -> we predicted NO. That aligns.

    Now, what about n=3 distinct: s=abc, t=bca. What is permutation? abc -> bca: mapping positions: 1->2, 2->3, 3->1 is a 3-cycle, which is even? A 3-cycle is even? Sign of a cycle of length k is (-1)^{k-1}. So 3-cycle: (-1)^{2}=1, even. So predicted YES. Can we actually make them equal? Let's test manually. s=abc, t=bca. We want to make them equal. Could we? Possibly. We could try to convert both to "abc" or something. But need to verify. We'll attempt to find sequence.

    Let s=abc, t=bca.

    We need to apply moves. Idea: we can try to get both to "abc". Starting s=abc, we can keep s as is (or we may need to change both). t=bca. We can try to turn t into abc. To turn bca to abc, we need to swap b and a? Actually bca -> abc: we need to get a at position1, b at pos2, c at pos3. Current t: pos1=b, pos2=c, pos3=a. A possible transformation: reverse substring of len2? Let's see if we can achieve using moves with equal lengths.

    Alternative: we can try to make both equal to "bac"? Not sure.

    We need a systematic way: because of parity condition, it might be possible. But we should test if there is any other hidden constraint.

    We can also think in terms of operation equivalence: Since we can apply any reversal to s and any reversal to t as long as lengths match, we might be able to simulate any even permutation on the combined system? Let's explore.

    We can break down the operation: a move with length L corresponds to applying a reversal to s and a reversal to t. If we think of the pair (s,t) as a 2-row array, we are allowed to reverse any contiguous segment in the top row and any contiguous segment (maybe different) in the bottom row, but lengths must match. This is like having two strings that we can manipulate but coupling lengths.

    Could there be an invariant beyond parity for distinct case? Possibly the total number of inversions modulo something? But parity of permutation is the only invariant under the group generated by all reversals? Actually, the reversal permutations generate the whole alternating group if we restrict to even permutations? Since reversals can be odd or even depending on length. But we are coupling lengths so that the parity of the move on s and t is same. So the net effect on s and t individually is that they are transformed by permutations whose parity is always equal. So the relative parity between s and t (i.e., sign(σ_s) * sign(σ_t)) is always 1? Actually sign(σ_s) = sign(σ_t) always, so product is even? Not necessarily, product is square so 1. But that's invariant of the process? Initially, sign(σ_s)=sign(σ_t)=1, so product=1. At end, if we achieve s=t, then σ_s and σ_t are permutations from original to final. They could be different. But we have sign(σ_s)=sign(σ_t) from invariant. So no further constraint.

    Thus, the necessary condition for distinct case is sign(π)=even. Is it also sufficient? We need to prove that if s and t are permutations of the same set (distinct characters) and π is even, then we can make s and t equal.

    I suspect yes. But we must also consider the ability to match lengths exactly. We need to construct a sequence of moves that transforms (s,t) to (x,x). Equivalent to we want to find a permutation τ such that we can transform s to τ and t to τ using reversal sequences with same lengths per step.

    One approach: show that we can reduce the problem to sorting both strings to the same order using moves. Since we can apply reversals to both strings, we might try to sort both strings into the same sorted order. Sorting a permutation using reversals is possible, but we need to ensure the sequences of reversal lengths match. But we can interleave moves to gradually align them.

    Alternatively, maybe we can always achieve equality if and only if the multiset condition holds and either there is a duplicate character or the permutation parity is even. This is a common pattern in many problems where you have operations that allow swapping with a "buddy" operation that toggles parity equally. For example, in problems where you have two strings and you can swap two adjacent characters in both strings simultaneously, the condition often becomes that the multisets are equal and parity of some inversion count matches, or if duplicates exist then always possible. But here we have more power: we can reverse arbitrary length substrings, not just adjacent swaps. However, the parity of reversal depends on length. But we can simulate adjacent swaps using len=2 reversals. So the ability to swap adjacent in both strings simultaneously is there. With adjacent swap operation on both strings simultaneously, can we make two strings equal? If we can swap adjacent in s and simultaneously swap adjacent in t (possibly at different positions), what is the condition? Let's analyze that simplified model: In each move, you can choose two indices i in s and j in t (maybe with same length 2) and swap adjacent characters at those positions in s and t respectively. This is a less powerful operation than ours because we can also do longer reversals. So if the condition for that simpler operation is "multiset equal and (if all characters distinct then parity of permutation even)", then our condition would be at least as permissive. But we need to verify if the extra power helps when parity is odd but there is a duplicate. In many similar problems (like "make two strings equal by swapping two characters in each string" etc.), duplicate characters can compensate parity.

    Thus, likely the solution: answer is YES if and only if the multiset of characters in s and t are the same, and additionally either there exists some character that appears at least twice, or the number of inversions (or parity) between s and t is even. But careful: the parity condition is about the permutation needed to turn s into t when all characters are considered distinct (by indexing). Since characters may repeat, we can assign identities to each occurrence (like treat each character as distinct by its position) to define a permutation based on matching positions? But we can choose which occurrences map to which, because identical characters are interchangeable. So we can pick a matching that minimizes some parity. Typically, for problems with swaps, if there is any duplicate character, we can always make the strings equal regardless of parity. Because we can use the duplicate to adjust parity. Is that true here? Let's test with a potential counterexample: n=2, s=aa, t=aa trivially yes. But s=aa, t=aa (same) always yes. s=ab, t=ba distinct, odd parity, no. But if duplicates exist, maybe any two strings with same multiset are possible? Let's try n=3: s=abb, t=bba. Multisets: a, b, b. Is it possible? We can test by brute reasoning. s=abb, t=bba. We want to make them equal. Let's try to see if we can do it.

    We'll attempt to find sequence: Moves: we can swap adjacent in both strings simultaneously. Might be able to do.

    First, note both have two b's and one a. We want to make both same. Perhaps we can target both become "bab" or "bba" etc.

    Let's try to convert both to "bab". s=abb, t=bba. To turn s=abb to bab: we can swap positions 1 and 2 (len=2 reversal) on s: swapping a and b yields bab. Simultaneously we need to perform a len=2 reversal on t. We can choose where to swap on t. Suppose we swap positions 1 and 2 on t: t=bba -> swapping first two yields bba? Actually bba: swapping b and b gives bba (same). So after move: s becomes bab, t becomes bba. Now they are bab and bba. Not equal. Next, we could swap positions 2 and 3 on s: bab -> swapping a and b yields bba. Simultaneously swap something on t. If we swap positions 2 and 3 on t: bba -> swapping b and a yields bab. So after that move, s becomes bba, t becomes bab. Still not equal. Another move: swap positions 1 and 2 on s: bba -> swapping b and b = bba; simultaneously swap positions 1 and 2 on t: bab -> swapping b and a = abb. That goes back. Hmm.

    Maybe we can use longer reversals. Or we might try to get both to "abb": start s=abb, t=bba. We want t to become abb. Reverse len=3 on t: reverse whole string bba -> abb. But then we must also reverse len=3 on s: reverse abb -> bba. So after move: s becomes bba, t becomes abb. Still not equal. Then reverse len=3 again on both: s bba->abb, t abb->bba. Back.

    Try combination: reverse len=2 on s at positions 2,3: abb -> abb? Actually swapping b and b yields same. So no.

    Maybe we need to use both strings to converge.

    Let's try to systematically explore small state space for n=3 with duplicates? Let's brute think: All possible configurations? Might be possible. But maybe duplicates don't always guarantee success. However, typical problems with adjacent swap operations (like in two arrays) often have condition: if there is a duplicate, any permutation is possible. Because you can use the duplicate as a placeholder to change parity.

    I recall a Codeforces problem: "You are given two strings s and t. In one operation, you can swap two adjacent characters in s and two adjacent characters in t (positions can be different). Determine if you can make s and t equal." I think the condition is: the multiset of characters must be same, and if all characters are distinct, then the parity of the permutation from s to t must be even. If there is any duplicate, it's always possible. I'm not 100% sure, but it sounds plausible.

    In our problem, the operation is more powerful (any reversal of equal length). So if that holds for adjacent swaps, it should also hold for reversals. But need to verify if the extra power could overcome parity barrier even when all distinct? Probably not, because we argued parity is invariant. But wait: we argued parity of the permutation mapping s to t must be even. That derivation assumed distinct characters to define the permutation. If there are duplicates, we cannot define a unique permutation; we can choose which occurrences map to which. So the invariant becomes: there exists a matching between the positions of identical characters such that the permutation parity is even? Or maybe the parity of the permutation defined by any matching of identical characters is invariant modulo something? Let's analyze more carefully for the case with duplicates.

    When characters are not distinct, the concept of parity of permutation from s to t is not well-defined because there may be multiple ways to map occurrences of the same character. However, the invariant we derived using sign of permutations applied to s and t relied on labeling each character uniquely. If characters are not distinct, we cannot label them uniquely. The parity of the permutation from s to t depends on how we identify which occurrence in s corresponds to which in t. So the condition might be: there exists a bijection between positions such that s[i] = t[φ(i)] and the permutation φ is even. But does the operation allow us to change that matching? Possibly we can reassign the identities by using moves because identical characters can be swapped without changing the string. That is, if there are duplicates, we can effectively change the underlying labeling by swapping identical characters. So the parity condition is not fixed; we can alter the permutation by swapping identical characters, which changes parity if the swap is between identical? Actually swapping two identical characters does not change the string, but if we consider the underlying labeled items, swapping them changes the permutation but the string remains same. Since the operation treats characters as letters, swapping identical letters is not observable. Therefore, we can effectively change the underlying permutation by swapping identical letters without affecting the visible string. So if there is at least one character that appears twice, we can adjust the parity of the permutation to make it even. So the necessary condition becomes: after appropriate matching, there exists an even permutation. And that is always true if there is a duplicate? Let's examine.

    Suppose we have two identical characters, say two 'a's. Then we can swap them arbitrarily; that corresponds to applying a transposition (odd) on the underlying labeled items, which changes parity. Since the string remains the same, we can effectively realize both parities for the mapping between s and t. More formally, we can consider that we are free to reassign which occurrence in s maps to which in t because they are indistinguishable. So we can choose a bijection that minimizes or changes parity. For any two multisets with duplicates, we can always find a bijection that gives an even permutation? Not always; if all characters are distinct, there is exactly one bijection (since each unique element appears once), so parity is fixed. If there is at least one duplicate, we can alter the bijection by swapping the duplicate characters. Swapping two identical items changes the permutation by a transposition (odd), thus toggles parity. So we can achieve both parity possibilities. Therefore, we can always find a bijection that yields an even permutation. So condition reduces to: multiset equal, and either there is a duplicate or the unique permutation (since distinct) is even.

    But is that sufficient? We also need to ensure we can actually achieve equality, given that we can only perform reversals with matched lengths. We have argued that if we can simulate any adjacent swap on both strings simultaneously, we can probably transform any even permutation. But with duplicates, we may also be able to handle odd permutations by using duplicates to adjust parity behind the scenes. But is it always possible? Let's test with a potential counterexample: n=2, s=aa, t=aa (duplicate) trivially yes. n=2, s=ab, t=ba (distinct, odd) -> NO. n=3, s=abb, t=bba (duplicate). We tried to find a sequence but haven't yet. Let's attempt more systematically. Write down all possible states? Might be possible. Let's try to construct a solution for abb/bba.

    We'll attempt to find a sequence using the allowed moves. Let me denote s and t as strings. We can use len=2 moves (adjacent swaps) and len=3 moves (full reversal). We can also use len=1 (do nothing). We need to get s == t.

    Let me try a sequence:

    Start: s=abb, t=bba.

    Goal: maybe both become "bab". That would be symmetric.

    Step 1: Reverse len=2 on s at positions 1-2: s becomes bab. Simultaneously, we need to apply len=2 reversal on t. Let's choose