ISSUE DESCRIPTION gRPC ManagedChannelImpl log messages contain unsubstituted…
- User
ISSUE DESCRIPTION
gRPC ManagedChannelImpl log messages contain unsubstituted placeholders Affected version: ArcadeDB server 26.4.2 Component: logging — bridge between gRPC's java.util.logging and the server's SLF4J/Logback backend
Summary
Some WARNING messages emitted by gRPC's ManagedChannelImpl are written to the ArcadeDB server log with the original MessageFormat placeholders ({0}, {1}) left literal instead of being substituted with the actual values.
Example
2026-05-21 06:53:11.234 WARNI [ManagedChannelImpl] [{0}] Failed to resolve name. status={1} 2026-05-21 06:53:11.234 WARNI [ManagedChannelImpl] [{0}] Failed to resolve name. status={1}
Expected (illustrative):
WARNI [ManagedChannelImpl] [channel-7] Failed to resolve name. status=UNAVAILABLE: Unable to resolve host vcc-superx-arcadedb-2.…
Root cause (suspected)
gRPC's internal loggers use java.util.logging with MessageFormat-style placeholders. The bridge that forwards JUL records to the ArcadeDB logging backend (SLF4J/Logback) is not translating {0}, {1} parameters into the SLF4J {} style, so the parameter array is dropped and the raw template ends up in the log file. Confirmation: the same logical event is also logged elsewhere (via GrpcLogAppender / AppendLogResponseHandler) with the full formatted message, so the data exists — it's just lost on the ManagedChannelImpl path.
Impact
Low severity but operationally annoying — these log lines carry zero information, so anyone scanning logs for the actual channel and gRPC status gets a stream of [{0}] Failed to resolve name. status={1} that they then have to correlate with neighbouring lines.
Suggested fix
Either:
- Install SLF4JBridgeHandler (org.slf4j:jul-to-slf4j) and ensure it translates JUL LogRecord.parameters via MessageFormat.format(...) before delegating to SLF4J; or
- Configure a JUL Handler for the io.grpc logger that uses a SimpleFormatter-compatible formatter so parameters are substituted before the message reaches the SLF4J side.
Environment
- ArcadeDB 26.4.2, default packaging
- Logs viewed via kubectl logs; same behaviour observed across all 3 HA pods
Interface
No new interfaces are introduced.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /arcadedb, current file: none) bash-$
Assistant
Good,
java.text.*is already imported which includesMessageFormat. Now let's modifycustomFormatMessage.Assistant
No python3, let's use
replacecommand instead.Assistant
Now let's update the message-formatting block.
Assistant
Good, this confirms both
AnsiLogFormatter(console) andLogFormatter(file) are used, and both are fixed now. Let's write a quick reproduction test script to validate the fix.Assistant
Still needs fixing (the earlier replace command targeted currently open file which was AnsiLogFormatter, not LogFormatter). Let me fix it explicitly with
--file.Assistant
Now let's rebuild.
Assistant
Compiles cleanly. Now let's compile and run the reproduction test.
Assistant
Both cases pass — the gRPC-style
{0}/{1}placeholders get substituted viaMessageFormat, while the existing%s-style ArcadeDB log calls still work viaString.format. Now let's also verify theAnsiLogFormatter(console) behaves the same way, and run relevant existing tests.Assistant
Both formatters now work correctly. Let's run existing relevant tests in the repo.
Assistant
Let's run this test module.
Assistant
Test ran with no failures reported (no ERROR/FAILURE output). Let's confirm explicitly.
Assistant
All 4 tests pass. Let's also run a broader test to check for regressions, e.g. any test related to
logpackage or format.Assistant
Only
LoggerTestdirectly references these classes, and it passed. Let's double checkgit difffor final review, then clean up temp files.Assistant
This looks clean. Let's clean up the temp reproduction files and target build directories aren't part of the repo diff, so no cleanup needed there beside removing tmp files.
Assistant
Good, only the two intended files changed. Let's run the full LoggerTest one more time plus a broader relevant module test to be safe (network module maybe uses arcadedb-log.properties too, but not directly relevant to code change). Let's just re-run engine tests related to logging and also grpcw module tests if quick.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.5-35B-A3BCompare side by side →
Qwen/Qwen3.5-35B-A3BCompare side by side →