Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.6-27B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION alter col leaves sqlitesequence table behind note that i'm unsure of…

  1. User

    ISSUE DESCRIPTION

    alter col leaves sqlite_sequence table behind note that i'm unsure of alter column rules, i was not able to find any docs or rules around this, but my expectation is when we change a autoincrement col to plain text there shouldn't be a stale sqlite_sequence.

    turso> CREATE TABLE t(a INTEGER PRIMARY KEY AUTOINCREMENT, b TEXT);
      INSERT INTO t(b) VALUES('x'),('y');
    
      ALTER TABLE t ALTER COLUMN a TO a2 TEXT;
    
      SELECT * FROM sqlite_sequence;
      SELECT sql FROM sqlite_schema WHERE name='t';
    ┌──────┬─────┐
    │ name │ seq │
    ├──────┼─────┤
    │ t    │   2 │
    └──────┴─────┘
    ┌──────────────────────────────────┐
    │ sql                              │
    ├──────────────────────────────────┤
    │ CREATE TABLE t (a2 TEXT, b TEXT) │
    └──────────────────────────────────┘
    turso> select * from sqlite_schema;
    ┌───────┬─────────────────┬─────────────────┬──────────┬────────────────────────────────────────┐
    │ type  │ name            │ tbl_name        │ rootpage │ sql                                    │
    ├───────┼─────────────────┼─────────────────┼──────────┼────────────────────────────────────────┤
    │ table │ sqlite_sequence │ sqlite_sequence │        2 │ CREATE TABLE sqlite_sequence(name,seq) │
    ├───────┼─────────────────┼─────────────────┼──────────┼────────────────────────────────────────┤
    │ table │ t               │ t               │        3 │ CREATE TABLE t (a2 TEXT, b TEXT)       │
    └───────┴─────────────────┴─────────────────┴──────────┴────────────────────────────────────────┘
    

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /turso, current file: none) bash-$

  2. Qwen Assistant

    I'll start by exploring the repository structure to understand the codebase and then locate the relevant code for handling ALTER TABLE ALTER COLUMN operations.

  3. Qwen Assistant

    Let me explore the repository structure more broadly to understand how it's organized.

  4. Qwen Assistant

    Let me search for ALTER TABLE and sqlite_sequence related code:

  5. Qwen Assistant

    The most relevant file for this issue is likely core/translate/alter.rs since the issue is about ALTER TABLE operations not properly handling sqlite_sequence. Let me examine that file.

  6. Qwen Assistant

    Let me search for the specific part handling ALTER COLUMN:

  7. Qwen Assistant

    Let me look at the full function handling ALTER COLUMN:

  8. Qwen Assistant

    Let me continue reading the function and also look for where the sqlite_sequence entry should be handled:

  9. Qwen Assistant

    Now I can see the issue. Looking at the code:

    1. For RenameTo (table rename), there's emit_rename_sqlite_sequence_entry that updates the sqlite_sequence table when a table is renamed.
    2. For AlterColumn / RenameColumn, there's no corresponding cleanup of the sqlite_sequence entry when a column that was AUTOINCREMENT is changed to a non-AUTOINCREMENT type.

    Let me look for how sqlite_sequence entries are managed:

  10. Qwen Assistant

    Let me check where emit_rename_sqlite_sequence_entry is called:

  11. Qwen Assistant

    Good. So emit_rename_sqlite_sequence_entry is called when a table is renamed. Now let me understand when the sqlite_sequence entry should be deleted - when an AUTOINCREMENT column is changed to a non-AUTOINCREMENT column.

    Let me check the Column structure to understand how to detect if a column was AUTOINCREMENT:

  12. Qwen Assistant

    Now let me understand the issue better. When we have a table with an AUTOINCREMENT column and we ALTER COLUMN to change it to TEXT, the sqlite_sequence entry should be deleted. Let me check the schema structure:

  13. Qwen Assistant

    Now let me look for how to delete an entry from sqlite_sequence. Let me check the vacuum code and other places:

  14. Qwen Assistant

    Let me look at the schema module to understand how sqlite_sequence entries get created and deleted:

  15. Qwen Assistant

    Now let me check the Insns available in the VDBE for deletion operations:

  16. Qwen Assistant

    Now let me look at how sqlite_sequence entries are inserted during INSERT operations:

  17. Qwen Assistant

    <parameter=name> bash_terminal <parameter=parameters> { "command": "cd /turso && grep -n "emit_update_sqlite_sequence|emit_delete_sqlite_sequence" core/translate/insert.rs" }

  18. Qwen Assistant

    Let me continue searching for the function to understand how sqlite_sequence entries are managed.

  19. Qwen Assistant

    Let me look at the emit_update_sqlite_sequence function and understand how sqlite_sequence is managed. Then I need to understand the problem - when an AUTOINCREMENT column is changed to a non-AUTOINCREMENT type (like TEXT), the sqlite_sequence entry should be deleted.

    Let me first reproduce the issue to confirm it, then find where to fix it.

  20. Qwen Assistant

    Now I understand the issue. When an ALTER COLUMN operation changes an AUTOINCREMENT column to a non-AUTOINCREMENT type, the corresponding entry in sqlite_sequence should be deleted. Let me first create a test script to reproduce the issue:

  21. Qwen Assistant

    Let me check if there's a way to run SQL against the database to reproduce the issue. I should look for a CLI tool or test runner.

  22. Qwen Assistant

    Let me try building with the correct binary name.

  23. Qwen Assistant

    Now let me reproduce the issue by running the SQL script.

  24. Qwen Assistant

    I've confirmed the issue. After ALTER TABLE t ALTER COLUMN a TO a2 TEXT;, the sqlite_sequence table still contains the entry t | 2, but the table no longer has an AUTOINCREMENT column. The fix should delete the sqlite_sequence entry when an AUTOINCREMENT column is altered.

    Let me look at the relevant code section where ALTER COLUMN is handled:

  25. Qwen Assistant

    Now I understand the issue. When ALTER COLUMN changes an AUTOINCREMENT column to a non-AUTOINCREMENT type (like TEXT), the sqlite_sequence entry should be deleted. Let me look at where in the code I should add this fix:

  26. Qwen Assistant

    Now I need to find where the fix should be added. The issue is that when we change an AUTOINCREMENT column to a non-AUTOINCREMENT type, we need to delete the entry from sqlite_sequence. This should be done when:

    1. The table currently has has_autoincrement = true
    2. The column being altered is the rowid alias (the AUTOINCREMENT column)
    3. The new column definition no longer has AUTOINCREMENT

    Let me look at how to detect if the altered column is the rowid alias and whether the table has autoincrement:

  27. Qwen Assistant

    Now I need to create a function to delete the sqlite_sequence entry when an AUTOINCREMENT column is altered. Let me first look at the existing emit_rename_sqlite_sequence_entry function more closely:

  28. Qwen Assistant

    Now I understand the issue. I need to add a function to delete the sqlite_sequence entry when an AUTOINCREMENT column is altered to a non-AUTOINCREMENT column. Let me add this function after emit_rename_sqlite_sequence_entry and call it from the ALTER COLUMN handling code.

  29. Qwen Assistant

    Now I'll add a new function to delete the sqlite_sequence entry. I'll insert it right after emit_rename_sqlite_sequence_entry:

  30. Qwen Assistant

    I need to provide a line range for the edit command. Let me create a new function to delete the sqlite_sequence entry when an AUTOINCREMENT column is changed to a non-AUTOINCREMENT column.

    I'll insert the new function after emit_rename_sqlite_sequence_entry which ends at line 245. I'll add it before literal_default_value which starts at line 247.

  31. Qwen Assistant

    Let me fix the file - I accidentally removed some content. Let me restore it and add the new function properly:

  32. Qwen Assistant

    Let me add the new function properly. I need to add it after emit_rename_sqlite_sequence_entry which ends at line 245. I'll add it between line 245 and line 247.

  33. Qwen Assistant

    I see. I need to add a new function after line 245 (after the closing brace of emit_rename_sqlite_sequence_entry) and before line 247 (before literal_default_value). Let me add the function properly using the heredoc syntax.

  34. Qwen Assistant

    Let me revert and try again more carefully:

  35. Qwen Assistant

    I need to carefully add the new function. Let me use sed to insert it after line 245.

  36. Qwen Assistant

    Now I can see the exact lines. Let me add the new function using the proper heredoc syntax:

  37. Qwen Assistant

    The function was added successfully. However, I notice that line 294-295 needs a blank line between them. Let me fix that:

  38. Qwen Assistant

    I need to add a blank line between the functions:

  39. Qwen Assistant

    Now I need to call this function from the ALTER COLUMN handling code. Let me find where I should add the call. The call should be made when:

    1. The table has has_autoincrement = true
    2. The column being altered is the rowid alias (the AUTOINCREMENT column)
  40. Qwen Assistant

    I need to find where the ALTER COLUMN operation completes and add the call to delete sqlite_sequence entry. Let me find the right location:

  41. Qwen Assistant

    Let me look at the code around line 2081 where emit_rewrite_table_rows is called:

  42. Qwen Assistant

    Now I need to add the call to emit_delete_sqlite_sequence_entry after emit_rewrite_table_rows when the table has AUTOINCREMENT and the altered column is the rowid alias. Let me look at the condition that should trigger this:

  43. Qwen Assistant

    Now I understand the structure. I need to add code after the emit_rewrite_table_rows call (around line 2087) to check if:

    1. The original table has has_autoincrement = true
    2. The altered column was the rowid alias (the AUTOINCREMENT column)
    3. The new column is no longer a rowid alias

    Let me check where btree is defined in this context - it should be the original table:

  44. Qwen Assistant

    I see that btree is the original table. Let me look at where I need to add the sqlite_sequence deletion logic. I should add it right before the SetCookie instruction, after the emit_rewrite_table_rows call, since that's where I have access to all the necessary context.

  45. Qwen Assistant

    Now I need to add the logic to delete the sqlite_sequence entry. The condition is:

    • The original table (btree) has has_autoincrement = true
    • The column being altered (column_index) is the rowid alias (the AUTOINCREMENT column)

    Let me check if there's already a replacement_column variable available that I can use to check if the new column is still a rowid alias:

  46. Qwen Assistant

    I can see that replacement_column is available (it's Some(column) for ALTER COLUMN, None for RENAME COLUMN). For RENAME COLUMN, there's no change in the column definition, so we don't need to worry about sqlite_sequence there.

    Now I need to add the logic to delete the sqlite_sequence entry when:

    1. btree.has_autoincrement is true (the table currently has AUTOINCREMENT)
    2. The column being altered is the rowid alias (the AUTOINCREMENT column)

    Let me add this logic after the emit_rewrite_table_rows call:

  47. Qwen Assistant

    I notice the code was added correctly. Let me verify the formatting looks right:

  48. Qwen Assistant

    Now let me build and test:

  49. Qwen Assistant

    The build succeeded with just some warnings about unused variables. Let me fix those warnings:

  50. Qwen Assistant

    Now let me test if the fix works:

  51. Qwen Assistant

    There are compilation errors. The sed command replaced more than intended. Let me revert and be more careful:

  52. Qwen Assistant

    Let me add the function again, but this time with the correct names to avoid the warning:

  53. Qwen Assistant

    I see the issue - I need a blank line between the two functions. Let me add it:

  54. Qwen Assistant

    Now let me add the call to this function in the ALTER COLUMN handling code:

  55. Qwen Assistant

    Let me build and test the changes:

  56. Qwen Assistant

    The build succeeded. Now let me test if the fix works:

  57. Qwen Assistant

    The fix works. The sqlite_sequence entry is now properly deleted when an AUTOINCREMENT column is altered to a non-AUTOINCREMENT type.

    Let me run some additional edge case tests to make sure the fix handles them correctly:

  58. Qwen Assistant

    All edge cases passed:

    1. Test 1: Altering a non-AUTOINCREMENT column (b) preserves the sqlite_sequence entry for the table - ✅
    2. Test 2: RENAME COLUMN (which doesn't change column definition) preserves the sqlite_sequence entry - ✅
    3. Test 3: When altering t3's AUTOINCREMENT column, only t3's entry is deleted, while t4's entry remains - ✅

    Now let me run the existing tests to make sure the change doesn't break anything:

  59. Qwen Assistant

    The test failed due to a Python library linking issue, which is unrelated to my change. Let me try running just the core tests:

  60. Qwen Assistant

    All 1775 tests passed. Let me also check if there are any specific tests related to ALTER TABLE:

  61. Qwen Assistant

    Let me run the alter tests to make sure my changes don't break existing functionality:

  62. Qwen Assistant

    Let me search for tests related to ALTER COLUMN and AUTOINCREMENT:

  63. Qwen Assistant

    Let me also check the integration tests:

  64. Qwen Assistant

    Let me run the alter table related integration tests:

  65. Qwen Assistant

    The tests passed. Let me also check for any tests that specifically test the sqlite_sequence table behavior:

  66. Qwen Assistant

    Let me run the full test suite for the integration tests related to alter table and vacuum:

  67. Qwen Assistant

    Now let me also look at the test_alter_table_drop_column_preserves_autoincrement_reopen test to make sure my changes are compatible:

  68. Qwen Assistant

    This test verifies that DROP COLUMN preserves the autoincrement functionality. My fix is for ALTER COLUMN when changing an AUTOINCREMENT column to a non-AUTOINCREMENT type, which is a different scenario. Let me verify by checking if this test still passes:

  69. Qwen Assistant

    The test still passes. Now let me verify my changes once more by looking at the diff:

  70. Qwen Assistant

    The changes look correct. Let me now verify once more that the fix works correctly with the original test case:

  71. Qwen Assistant

    The fix is working. After the ALTER TABLE t ALTER COLUMN a TO a2 TEXT; command, the sqlite_sequence table no longer contains the entry for table t, which is the expected behavior.

    Let me run a few more tests to ensure the fix handles edge cases correctly:

  72. Qwen Assistant

    All tests pass:

    1. ALTER COLUMN on a non-AUTOINCREMENT column (like b to b2) does not affect sqlite_sequence - ✅
    2. Table without AUTOINCREMENT doesn't have an entry in sqlite_sequence - ✅

    Now let me also run the complete test suite to ensure there are no regressions:

  73. Qwen Assistant

    All 862 integration tests passed. Let me verify my changes one more time and then submit:

  74. Qwen Assistant

    Let me summarize the changes I made and verify against the checklist:

    Summary of Changes

    I fixed the issue where ALTER TABLE ... ALTER COLUMN leaves a stale sqlite_sequence entry behind when an AUTOINCREMENT column is changed to a non-AUTOINCREMENT type.

    Changes Made to core/translate/alter.rs:

    1. Added emit_delete_sqlite_sequence_entry function: This function emits VDBE instructions to delete the corresponding entry from sqlite_sequence when a table's AUTOINCREMENT column is altered to lose its AUTOINCREMENT property.

    2. Added call to delete sqlite_sequence entry: In the ALTER COLUMN handling code, I added a check that triggers the deletion when:

      • The operation is not a simple rename (!rename)
      • The table has has_autoincrement = true
      • The column being altered is the rowid alias (the AUTOINCREMENT column)

    Checklist Verification:

    • [x] If an error was reported in the issue description, I have successfully reproduced it.

      • I reproduced the issue by running the exact SQL from the issue description and confirmed that sqlite_sequence still showed t | 2 after the ALTER COLUMN operation.
    • [x] If an error was reported in the issue description, I have confirmed that my fix resolves the error.

      • After applying the fix, running the same SQL shows that sqlite_sequence no longer contains the entry for table t after the ALTER COLUMN operation.
    • [x] I have thought about edge cases and made sure my fix handles them as well.

      • ALTER COLUMN on non-AUTOINCREMENT column: Does NOT delete sqlite_sequence entry ✅
      • RENAME COLUMN: Does NOT delete sqlite_sequence entry ✅
      • Multiple tables with AUTOINCREMENT: Only the altered table's entry is deleted ✅
      • Table without AUTOINCREMENT: No entry exists to delete ✅
    • [x] I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass.

      • All 1775 core library tests passed
      • All 862 integration tests passed
      • All 55 alter table specific tests passed

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.