Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.6-27B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION [Reborn WebUI Beta] Add WebUI idempotency and accepted-message ledger…

  1. User

    ISSUE DESCRIPTION

    [Reborn WebUI Beta] Add WebUI idempotency and accepted-message ledger Parent tracker: #3607 Module: M2 — Native Product Workflow / Inbound Facade Priority: P0

    Goal

    Make WebUI mutations idempotent so duplicate browser submits do not create duplicate turns/messages.

    Scope

    • Use client action id / idempotency key for create-thread and send-message.
    • Preserve accepted-message ref/outcome for duplicate requests.
    • Handle concurrent duplicate submissions safely.

    Acceptance criteria

    • Duplicate send returns the same accepted ref/outcome.
    • Concurrent duplicate send creates at most one accepted message/turn.
    • Failed validation does not create a ghost turn/message.
    • Retry after transient unavailable state has deterministic behavior.
    • Tests cover same-thread duplicate, cross-thread duplicate rejection, and concurrent duplicate behavior.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /ironclaw, current file: none) bash-$

  2. Qwen Assistant

    I'll start by exploring the repository structure to understand the codebase and then implement the idempotency feature for WebUI mutations.

  3. Qwen Assistant

    Let me get a better understanding of the repository structure.

  4. Qwen Assistant

    This is a Rust project (Cargo.toml, Cargo.lock). Let me explore the source structure to find WebUI-related code.

  5. Qwen Assistant

    Let me search for WebUI-related code to understand the current implementation.

  6. Qwen Assistant

    The command returned exit code 0 but no output, which means no files matched. Let me search more broadly.

  7. Qwen Assistant

    Let me search for terms related to the issue - idempotency, create-thread, send-message, etc.

  8. Qwen Assistant

    Let me explore the web channels and agent modules more closely.

  9. Qwen Assistant

    Let me look at the chat feature and related modules for send-message functionality.

  10. Qwen Assistant

    Now let me look at the types to understand the SendMessageRequest and SendMessageResponse structures:

  11. Qwen Assistant

    Now let me look at the thread creation handler:

  12. Qwen Assistant

    Let me look at the agent session and thread operations to understand how messages flow:

  13. Qwen Assistant

    Let me explore the utility module to understand how messages are created and processed:

  14. Qwen Assistant

    Now let me look at the IncomingMessage type to understand its structure:

  15. Qwen Assistant

    Now let me look at how the agent processes messages, specifically the handle_message or process_message functions:

  16. Qwen Assistant

    Let me look at the tests directory to understand what testing patterns exist:

  17. Qwen Assistant

    Let me check for existing idempotency-related tests and patterns:

  18. Qwen Assistant

    Let me look at the crates directory to understand the project structure better:

  19. Qwen Assistant

    Let me look at the ironclaw_reborn crate since the issue mentions "Reborn WebUI Beta":

  20. Qwen Assistant

    Let me look at the ironclaw_gateway crate, which likely contains the WebUI-related code:

  21. Qwen Assistant

    This is very relevant! Let me look at the ironclaw_product_workflow crate - especially webui_inbound.rs and ledger.rs:

  22. Qwen Assistant

    Now let me look at the ledger module:

  23. Qwen Assistant

    Now let me look at the action module:

  24. Qwen Assistant

    Now let me look at the existing test file for webui_inbound to understand the testing patterns:

  25. Qwen Assistant

    Now let me look at the fakes module to understand the test-support fake for IdempotencyLedger:

  26. Qwen Assistant

    Now let me look at the workflow module to understand how the DefaultProductWorkflow handles actions:

  27. Qwen Assistant

    Now I have a good understanding of the codebase. Let me look at the inbound_turn.rs module and the reborn services types to understand the full flow:

  28. Qwen Assistant

    Let me look at the existing tests more closely to understand what's already covered:

  29. Qwen Assistant

    Now let me check the reborn_services module to understand how the WebUI commands flow through the system:

  30. Qwen Assistant

    I apologize for the confusion. Let me continue exploring the codebase to understand the structure better.

    <tool_call> <function=bash_terminal> <parameter=command> ls /ironclaw/crates/ironclaw_product_workflow/src/reborn_services/ </tool_call>

  31. Qwen Assistant

    I need to actually call the bash_terminal tool to list the directory contents.

  32. Qwen Assistant

    Now I need to understand the issue better. Looking at the issue description:

    1. Goal: Make WebUI mutations idempotent so duplicate browser submits do not create duplicate turns/messages.

    2. Scope:

      • Use client action id / idempotency key for create-thread and send-message
      • Preserve accepted-message ref/outcome for duplicate requests
      • Handle concurrent duplicate submissions safely
    3. Acceptance criteria:

      • Duplicate send returns the same accepted ref/outcome
      • Concurrent duplicate send creates at most one accepted message/turn
      • Failed validation does not create a ghost turn/message
      • Retry after transient unavailable state has deterministic behavior
      • Tests cover same-thread duplicate, cross-thread duplicate rejection, and concurrent duplicate behavior

    Looking at the codebase, I can see:

    1. ironclaw_product_workflow already has an IdempotencyLedger with FakeIdempotencyLedger
    2. WebUiSendMessageRequest and WebUiCreateThreadRequest already have client_action_id fields
    3. The DefaultProductWorkflow uses the ledger for deduplication

    However, looking at the current implementation, I need to understand what's missing. The issue says "Add WebUI idempotency and accepted-message ledger" - this suggests we need to add the WebUI-specific idempotency handling to the DefaultProductWorkflow or a similar component.

    Let me look at the reborn_services types and error modules, then check what's currently being tested vs what needs to be implemented.

    Let me look at the inbound_turn_contract tests to see what's already covered.

  33. Qwen Assistant

    Let me check the reborn_services module files to understand what's already there:

  34. Qwen Assistant

    Now I have a good understanding of the codebase. Looking at the issue:

    Issue: Add WebUI idempotency and accepted-message ledger

    The issue mentions that WebUI mutations should be idempotent. Looking at the existing code:

    1. ironclaw_product_workflow already has IdempotencyLedger trait and FakeIdempotencyLedger implementation
    2. WebUiSendMessageRequest and WebUiCreateThreadRequest already have client_action_id fields
    3. DefaultProductWorkflow uses the ledger for deduplication

    But the issue is about WebUI-specific idempotency. Looking at the structure:

    • ironclaw_product_workflow handles product adapter envelopes (webhooks, etc.)
    • WebUiInboundCommand is the route-independent WebUI command type
    • The actual WebUI handlers are in /ironclaw/src/channels/web/features/chat/mod.rs

    Looking at the RebornServices trait and RebornServicesApi, I need to understand what's missing.

    Let me check the RebornServices trait and see what methods exist and what's missing for idempotency.

    The issue mentions:

    • "Use client action id / idempotency key for create-thread and send-message"
    • "Preserve accepted-message ref/outcome for duplicate requests"
    • "Handle concurrent duplicate submissions safely"

    The RebornServices trait likely needs methods that handle idempotency for WebUI mutations. Let me look at what methods exist and what's missing.

    Let me also check the tests directory to see what tests exist and what's missing.

    Looking at the checklist:

    1. Duplicate send returns the same accepted ref/outcome
    2. Concurrent duplicate send creates at most one accepted message/turn
    3. Failed validation does not create a ghost turn/message
    4. Retry after transient unavailable state has deterministic behavior
    5. Tests cover same-thread duplicate, cross-thread duplicate rejection, and concurrent duplicate behavior

    This is about the RebornServices implementation that handles WebUI commands. Let me look at what the issue is asking for.

    The RebornServices trait seems to be the interface for handling WebUI commands. I need to:

    1. Add idempotency handling for create-thread and send-message
    2. Store accepted message outcomes for replay on duplicates
    3. Handle concurrent duplicates safely

    Let me check what's currently in RebornServicesApi and what's missing.

    Actually, looking more carefully at the codebase:

    • ironclaw_product_workflow already has the idempotency ledger
    • DefaultProductWorkflow uses it
    • But there's no WebUI-specific workflow that uses client_action_id for deduplication

    The WebUiInboundCommand enum has client_action_id fields, but there's no implementation that uses these for idempotency.

    Let me look at the reborn_services module more carefully to understand what needs to be implemented.

    The issue is asking for:

    1. WebUI-specific idempotency ledger (separate from the general product adapter ledger)
    2. The ledger should store accepted message refs/outcomes
    3. Duplicate sends should return the same outcome
    4. Concurrent duplicates should only create one message

    Let me look at what exists and what's missing.

    Based on my analysis:

    1. The RebornServices trait defines the API but doesn't have idempotency methods
    2. The WebUiInboundCommand has client_action_id but there's no handler that uses it for deduplication
    3. There's no WebUI-specific idempotency ledger

    I need to:

    1. Create a WebUI-specific idempotency ledger trait
    2. Implement idempotency checking for create-thread and send-message
    3. Add methods to RebornServices for handling duplicates
    4. Write tests for the various scenarios

    Let me check the reborn_services/mod.rs file to see the trait definition.

  35. Qwen Assistant

    Now I have a very good understanding of the codebase. Looking at the RebornServices implementation in reborn_services.rs, I can see that:

    1. submit_turn already has idempotency via client_action_id - it uses replay_accepted_inbound_message to check for previously accepted messages
    2. create_thread is NOT in the RebornServicesApi trait! This is what's missing.

    Looking at the issue requirements:

    • "Use client action id / idempotency key for create-thread and send-message" ✓ send-message is done, ✗ create-thread is missing
    • "Preserve accepted-message ref/outcome for duplicate requests" - partially done for send-message
    • "Handle concurrent duplicate submissions safely" - needs testing

    Let me check what's missing more carefully. The RebornServicesApi trait has:

    • submit_turn ✓
    • get_timeline
    • stream_events
    • cancel_run
    • resolve_gate

    But it's missing:

    • create_thread - this is the main missing piece!

    The issue mentions:

    • Tests cover same-thread duplicate, cross-thread duplicate rejection, and concurrent duplicate behavior

    Let me check the tests to see what's covered and what's missing.

    Based on my analysis, here's what needs to be implemented:

    1. Add create_thread method to RebornServicesApi trait - with idempotency support
    2. Add idempotency ledger for accepted messages - to store and replay outcomes for create-thread
    3. Add tests for:
      • Same-thread duplicate (replay accepted message)
      • Cross-thread duplicate rejection
      • Concurrent duplicate behavior

    Let me first run the existing tests to make sure they pass, then implement the missing functionality.

  36. Qwen Assistant

    I need to set up the Rust toolchain first before I can run the tests.

  37. Qwen Assistant

    Let me try running the tests again now that Rust is configured.

  38. Qwen Assistant

    Let me run all the tests for the product_workflow crate to see what passes and what might be failing.

  39. Qwen Assistant

    I see that all tests are passing. Let me examine the reborn_services_contract test file to understand the current create_thread implementation and what might be missing:

  40. Qwen Assistant

    Let me look at the create_thread implementation in reborn_services.rs:

  41. Qwen Assistant

    Let me search for concurrent duplicate tests and understand what's missing:

  42. Qwen Assistant

    The tests are passing, which means the basic functionality exists. Let me understand what's missing based on the issue requirements:

    1. Duplicate send returns the same accepted ref/outcome - Looking at the tests, duplicate_submit_replays_prior_handoff_without_second_submission tests this for submit_turn. Need to check if create_thread has similar test.

    2. Concurrent duplicate send creates at most one accepted message/turn - I don't see any concurrent tests. This is a gap.

    3. Failed validation does not create a ghost turn/message - Need to verify this is tested.

    4. Retry after transient unavailable state has deterministic behavior - Some tests exist for transient failures but might not be complete.

    5. Tests cover same-thread duplicate, cross-thread duplicate rejection, and concurrent duplicate behavior - Need to check these specific scenarios.

    Looking at the test duplicate_create_thread_replays_generated_thread_for_same_client_action, it seems like create_thread idempotency is already implemented. Let me look at the actual create_thread implementation and see what tests exist vs what's missing.

    Let me search for concurrent tests and understand what's missing.

  43. Qwen Assistant

    Let me look at that test to understand the current implementation:

  44. Qwen Assistant

    Let me look at what tests might be missing. Based on the issue description, I need to implement tests for:

    1. Concurrent duplicate behavior
    2. Cross-thread duplicate rejection
    3. Failed validation not creating ghost turns
    4. Retry after transient unavailable state

    Let me check the create_thread method implementation in reborn_services.rs to understand how it handles idempotency:

  45. Qwen Assistant

    Let me understand the full picture. Based on the issue and my analysis:

    What exists:

    1. IdempotencyLedger trait and FakeIdempotencyLedger for product adapter deduplication
    2. WebUiSendMessageRequest and WebUiCreateThreadRequest have client_action_id fields
    3. submit_turn has idempotency via replay_accepted_inbound_message
    4. create_thread generates deterministic thread IDs based on client_action_id
    5. Some duplicate tests exist (duplicate_submit_replays_prior_handoff, duplicate_create_thread_replays_generated_thread)

    What's missing based on the acceptance criteria:

    1. Concurrent duplicate send creates at most one accepted message/turn - No concurrent tests
    2. Cross-thread duplicate rejection - No tests for this
    3. Failed validation does not create a ghost turn/message - No tests for this
    4. Retry after transient unavailable state has deterministic behavior - Partially covered

    Let me create a comprehensive test file that covers these scenarios. First, let me understand the exact test structure needed.

  46. Qwen Assistant

    Based on my analysis of the codebase and the issue requirements, I need to add tests for the following acceptance criteria:

    1. Concurrent duplicate send creates at most one accepted message/turn - Need to test concurrent submissions
    2. Cross-thread duplicate rejection - Need to test that duplicate client_action_id across different threads is rejected
    3. Failed validation does not create a ghost turn/message - Need to test that validation failures don't create messages
    4. Retry after transient unavailable state has deterministic behavior - Need to test retry scenarios

    Let me add these tests to the reborn_services_contract.rs file.

  47. Qwen Assistant

    Now I understand the codebase well. Let me add the missing tests for the acceptance criteria. I'll add tests for:

    1. Concurrent duplicate submissions
    2. Failed validation not creating ghost messages
    3. Cross-thread behavior (same client_action_id on different threads)
    4. Retry after transient failures
  48. Qwen Assistant

    The previous command may have had an issue. Let me verify that the tests were added correctly by checking the file content and then running the tests.

  49. Qwen Assistant

    The tests were added successfully. Now I need to run them to make sure they compile and pass. Let me run the tests for the reborn_services_contract module.

  50. Qwen Assistant

    I need to add the futures crate as a dev dependency or use an alternative. Let me check what's available in the Cargo.toml.

  51. Qwen Assistant

    I need to rewrite the concurrent tests to use tokio's join functionality instead of the futures crate. Let me update the tests:

  52. Qwen Assistant

    The user seems to have just seen the previous output. I need to continue with my work - I created the test file content but I need to actually update the test file with the new tests. Let me check the current state and properly replace the tests I added earlier (which used futures::future::join_all) with the corrected version that uses tokio::join!.

    Let me:

    1. First see the current end of the test file to understand where my bad tests start
    2. Replace those tests with the corrected version
  53. Qwen Assistant

    The test file currently has my previously added tests that use futures::future::join_all which is causing compilation errors. I need to:

    1. Find where my new tests start (line 873)
    2. Remove everything from that line onwards
    3. Add the corrected tests that use tokio::join! instead

    Let me first check how many lines are in the file currently, then truncate at the right point and add the new tests.

  54. Qwen Assistant

    The file has 1285 lines. I need to:

    1. Keep the original tests (up to around line 871 where my new tests start)
    2. Replace everything from line 872 onwards with the corrected tests

    Let me first check what's on line 871 to make sure I'm truncating at the right spot.

  55. Qwen Assistant

    Let me continue from where I left off. I need to truncate the test file at the right point (before my new tests start) and then append the corrected tests that use tokio::join! instead of futures::future::join_all.

    From my investigation:

    • Line 868 starts the comment for my first new test
    • I need to find where the original tests end (should be around line 867 or so)
    • Truncate there and append the corrected tests

    Let me check what's on line 865-867 to find the exact truncation point.

  56. Qwen Assistant

    Perfect! The original tests end at line 865. I need to truncate the file there and append the corrected tests. Let me do this now.

  57. Qwen Assistant

    Let me run the tests to verify they compile and pass after my changes.

  58. Qwen Assistant

    I see the issue - the tokio::join! macro with async move blocks needs each closure to have its own clone of the shared variables. Let me fix the concurrent tests properly.

  59. Qwen Assistant

    Now let me replace the test file with the corrected version:

  60. Qwen Assistant

    Let me run the tests to verify the corrected tests compile and pass.

  61. Qwen Assistant

    All 23 tests passed, including the 6 new tests I added. Let me run all tests in the product_workflow crate to ensure I haven't broken anything:

  62. Qwen Assistant

    All tests passed. Let me verify my changes by reviewing what was modified:

  63. Qwen Assistant

    Let me verify the changes I made and then provide a summary before submitting. I've added 6 new tests to the reborn_services_contract.rs test file that cover the acceptance criteria from the issue. Let me do a final verification of the tests and then submit.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.