ISSUE DESCRIPTION no warning when api-key in arrearage There is no response for chat…
- User
ISSUE DESCRIPTION
no warning when api-key in arrearage There is no response for chat when api-key in arrearage, please give me a warning
Evaluation contract
Treat HTTP 402, normalized billing/quota tokens such as
insufficient_quota,quota_exceeded,quota_exhausted,billing_hard_limit_reached, andpayment_required, and unambiguous billing text such as “exceeded your current quota”, “insufficient balance”, or “payment required” as account-arrearage failures. Surface a non-empty billing-specific message that does not expose the raw provider dump and takes precedence over a configured generic error message. A plain HTTP 429rate_limit_exceeded, timeouts, connection failures, HTTP 5xx responses, successful responses, and ordinary text that merely mentions a quota are not arrearage. Persist only the existing model-error placeholder in session history.Interface
Type: Function Name: is_arrearage_response Path: nanobot/providers/base.py Input: cls, response: LLMResponse Output: bool Description: Detects API-key arrearage, quota, or billing errors that won't clear on retry. Returns True for HTTP 402 status, billing semantic tokens (e.g., 'insufficient_quota'), or matching text markers in the response content.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /nanobot, current file: none) bash-$
Assistant
Let me analyze the issue. The user wants a warning when an API key is in arrearage (billing issues). I need to:
- First, explore the repository structure to understand the codebase
- Find the
nanobot/providers/base.pyfile whereis_arrearage_responseshould be implemented - Understand the
LLMResponseclass and how responses are handled - Implement the
is_arrearage_responsemethod that detects billing/arrearage errors - Make sure the warning is surfaced properly
Let me start by exploring the repository.
Assistant
Let me see more of the file to understand the
_is_transient_responsemethod:Assistant
Now let me understand how errors are handled in the agent loop or runner to see where the warning should be surfaced:
Assistant
Now I need to understand how errors are surfaced. Let me look at the
_DEFAULT_ERROR_MESSAGEandspec.error_message:Assistant
Now let me look at how the tests are structured for this area:
Assistant
No existing tests for
is_arrearage. Let me look at how the runner handles the error case and where the warning should be displayed.Assistant
Let me look at the test files for LLM response and provider retry to understand the test patterns, and also look at the runner errors test to understand how errors are handled.
Assistant
Let me now look at the runner_errors test to understand how errors are handled in the agent runner:
Assistant
Now I have a good understanding of the codebase. Let me look at the runner more closely to see how errors are handled:
Assistant
Now I have a clear picture. Let me understand the full flow:
- The
LLMResponsecan havefinish_reason="error" - When that happens in
runner.py, it usesclean or spec.error_message or _DEFAULT_ERROR_MESSAGEas the final content - The
_PERSISTED_MODEL_ERROR_PLACEHOLDERis persisted in session messages - I need to implement
is_arrearage_responseinLLMProviderclass to detect billing/arrearage errors - Then I need to use it in the runner to show a billing-specific warning message
Let me look more closely at how the error is handled in the runner:
- The
Assistant
Now I understand. The key line is:
final_content = clean or spec.error_message or _DEFAULT_ERROR_MESSAGEWhen there's an error,
cleanis the error content from the response. If it's empty, it falls back tospec.error_messageor the default message.For arrearage errors, I need to:
- Add
is_arrearage_responseclassmethod toLLMProviderthat detects billing errors - In the runner, check if the error response is an arrearage response and if so, show a billing-specific warning message that takes precedence over
spec.error_message
Let me first check what
cleanis at that point:- Add
Assistant
So
cleanis the finalized content (the response content). When the response is an error,cleanwill be whatever error text is inresponse.content.Now let me look at the plan:
-
Implement
is_arrearage_responseinnanobot/providers/base.py- A classmethod onLLMProviderthat takes anLLMResponseand returnsTrueif it's a billing/arrearage error (HTTP 402, specific error tokens, or billing text). -
Update the runner to check for arrearage responses and show a billing-specific warning instead of the raw error or generic error message.
Let me now implement this. First, let me look at where in base.py the new method should go:
-
Assistant
Now let me implement the
is_arrearage_responsemethod. Based on the evaluation contract, I need to detect:- HTTP 402 status
- Billing semantic tokens:
insufficient_quota,quota_exceeded,quota_exhausted,billing_hard_limit_reached,payment_required - Text markers: "exceeded your current quota", "insufficient balance", "payment required"
And NOT detect:
- Plain HTTP 429
rate_limit_exceeded - Timeouts, connection failures
- HTTP 5xx responses
- Successful responses
- Ordinary text that merely mentions "quota"
Assistant
I need to use the correct syntax for opening files.
Assistant
Now I'll add the
is_arrearage_responseclassmethod. I'll add it right after the_is_transient_errormethod. Let me first check the exact line numbers:Assistant
I'll add the new method after
_is_transient_responseand before_normalize_error_token. The insertion point is after line 317 and before line 318. Let me look at the exact content:Assistant
Now I'll insert the
is_arrearage_responsemethod. I need to add it between line 317 and line 318.Assistant
Now I need to insert this into the base.py file. The class attributes
_ARREARAGE_ERROR_TOKENSand_ARREARAGE_TEXT_MARKERSshould be at the class level (with other class-level constants), and theis_arrearage_responsemethod should be placed after_is_transient_response. Let me find where the class-level constants end:Assistant
Good. The class-level constants end at line 165 (
_SENTINEL = object()), and__init__starts at line 167. I should add the arrearage constants right before_SENTINEL. And theis_arrearage_responsemethod should go after_is_transient_response(after line 317) and before_normalize_error_token(line 318).Let me do this in two steps. First, add the class-level constants:
Assistant
I need to:
- Add the arrearage class constants after line 163 (after the closing paren of
_RETRYABLE_429_TEXT_MARKERS) and before_SENTINEL - Add the
is_arrearage_responsemethod after line 317 and before line 318
Let me use sed to insert these.
- Add the arrearage class constants after line 163 (after the closing paren of
Assistant
Class constants are added. Now I need to find the new line number for where to insert the
is_arrearage_responsemethod. Since I added 14 lines, the old line 317 is now at line 331:Assistant
Good. I need to insert the
is_arrearage_responsemethod after line 330 and before line 332 (the@staticmethodline). Let me insert it:Assistant
The
is_arrearage_responsemethod is now properly added. Now I need to update the runner to use this method and show a billing-specific warning when an arrearage response is detected.Let me now update the runner:
Assistant
Now I need to add the arrearage check. The key change is on line 507:
final_content = clean or spec.error_message or _DEFAULT_ERROR_MESSAGEThis needs to be updated so that when it's an arrearage response, we show a billing-specific message instead. The billing message should take precedence over
spec.error_message.Let me also define a billing error message constant:
Assistant
Let me add a billing error message constant after line 56 and then modify the error handling logic:
Assistant
Good. Now let me find the updated line number for the error handling block:
Assistant
Now I need to modify line 508 to check for arrearage first. The logic should be:
- If it's an arrearage response, use
_ARREARAGE_ERROR_MESSAGE - Otherwise, use
clean or spec.error_message or _DEFAULT_ERROR_MESSAGE
- If it's an arrearage response, use
Assistant
The change looks good. Now let me verify that the code is syntactically correct by trying to import the modules:
Assistant
Both modules import successfully. Now let me write a test script to verify the
is_arrearage_responsemethod works correctly:Assistant
I need to also implement the
chatabstract method:Assistant
All tests passed. Now let me run the existing tests to make sure I haven't broken anything:
Assistant
All provider retry tests pass. Now let me run the runner error tests:
Assistant
I see the issue. The
AgentRunnerstores the provider asself.provider, notself._provider. Let me check:Assistant
I need to use
self.providerinstead ofself._provider:Assistant
Now let's run the tests again:
Assistant
The test is failing because the content "429 rate limit exceeded" contains the text "rate limit exceeded" which is NOT in my arrearage markers. But wait, the error is that the test is now getting the arrearage message. Let me check... "429 rate limit exceeded" contains "exceeded" - let me check if it matches "exceeded your current quota":
Assistant
OK, so no match. The issue is that
MagicMock(spec=LLMProvider)doesn't properly implementis_arrearage_response. Since it's a MagicMock, the method callis_arrearage_responsereturns a truthy MagicMock object. Let me verify:Assistant
is_arrearage_response>Exactly! The MagicMock returns a truthy MagicMock object, which causes the condition
if self.provider.is_arrearage_response(response):to always be True. This is becausespec=LLMProviderdoesn't mock the classmethod properly.The issue is in the test, but I'm told NOT to modify tests. So I need to handle this differently. The problem is that when
self.provideris a MagicMock, callingis_arrearage_responsereturns a MagicMock instead of a bool.Let me think about this... The test uses
MagicMock(spec=LLMProvider)which means it only exposes the public interface. Butis_arrearage_responseis a classmethod, and MagicMock doesn't properly handle classmethods.The solution could be:
- Instead of calling
self.provider.is_arrearage_response(response), I could check if the provider has the method and call it, or use a type check - Or, I could use
getattrwith a default value
But actually, the real issue is that in tests, the provider is mocked. In real code, the provider is an actual LLMProvider instance. The test is using a mock that doesn't properly implement the classmethod.
Wait, let me re-read the instructions: "If existing tests break because they need to be updated to reflect the changes you made, just ignore it."
This test was checking the error message content. My change intentionally changes the error message for arrearage responses. But the test is using a MagicMock that incorrectly triggers the arrearage path because MagicMock returns truthy objects.
Actually, I think the right approach here is to handle the case where the provider might not properly support
is_arrearage_response. Let me think of a better approach...Actually wait - looking at it more carefully, the test uses
MagicMock(spec=LLMProvider). Thespecparameter means the mock will only allow attributes that exist on the spec class. Sinceis_arrearage_responseis a classmethod onLLMProvider, calling it through the instance will create a MagicMock that returns another MagicMock.The proper fix is to use the classmethod directly from
LLMProviderinstead of calling it on the instance. This way, even ifself.provideris a mock, we use the real implementation:<tool_call> <function=bash_terminal> <parameter=command> grep -n "from nanobot.providers.base import" /nanobot/nanobot/agent/runner.py </tool_call>
- Instead of calling
Assistant
I forgot to include the bash_terminal command. Let me try again.
Assistant
Now I'll update the code to use the classmethod directly on
LLMProviderinstead of calling it onself.provider:Assistant
The user is seeing my internal thinking tags in the response. I need to continue my work without exposing internal reasoning. Let me verify the change was made correctly and continue with testing.
Assistant
Good, the change is in place. Now let me run the tests again to verify:
Assistant
All runner error tests pass. Let me run more tests to ensure nothing else is broken:
Assistant
All provider tests pass. Let me also run the agent runner tests:
Assistant
All tests pass. Let me run my arrearage test script again to make sure everything still works:
Assistant
Let me continue with the verification by running more comprehensive tests and then checking the git diff to see all changes.
Assistant
All tests pass. Let me verify the final state of my changes by reviewing the git diff.
Assistant
I see the changes look correct. Let me run a broader set of tests to make sure nothing is broken across the codebase, and then submit.
Assistant
Let me check if this failing test is related to my changes or is a pre-existing issue:
Assistant
Good - the test failure is pre-existing and unrelated to my changes. Let me restore my changes and submit.
Assistant
Now let me verify my changes one more time and submit.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →