Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.6-27B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Formatter rewrites Lisette f-strings to multiline interpolation that…

  1. User

    ISSUE DESCRIPTION

    Formatter rewrites Lisette f-strings to multiline interpolation that the compiler rejects lis build rejects multiline interpolation expressions inside f"...{...}" strings, but Zed’s Lisette formatter appears to rewrite single-line calls across lines automatically.

    Example:

    f"You cannot use another ender pearl for {shared.format_duration(
      remaining,
    )}."
    

    The compiler reports:

    [error] Multi-line f-string interpolation
    ...
    error: f-string interpolations must be single-line
    

    Impact:

    • lis build fails after formatting in touched spots.
    • This forces manual one-line edits to pass build.

    Expected:

    • Either Lisette formatter should preserve single-line interpolation in compatible cases, or
    • Formatter rules should be configured to avoid splitting interpolation argument expressions across lines.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /lisette, current file: none) bash-$

  2. Qwen Assistant

    Let me start by exploring the repository structure to understand the codebase and find the relevant files related to the Lisette formatter that's causing the issue with f-string interpolation.

  3. Qwen Assistant

    Let me explore the format crate more closely since that's likely where the f-string formatting logic is.

  4. Qwen Assistant

    Let me search for f-string related code in the formatter:

  5. Qwen Assistant

    Let me look at the format_string function more closely:

  6. Qwen Assistant

    The open command doesn't support the file and line_number arguments in the JSON format. Let me check the correct usage - it should be positional arguments.

    Actually, looking at the usage description again:

    Usage: open [OPTIONS] [FILE] [LINE_NUMBER]
    

    So it seems like it should work. But the error says "Cannot extract command". Let me try a different approach - maybe the tool expects different formatting.

  7. Qwen Assistant

    Let me look at the lindig module to understand the Document types and how to force single-line formatting:

  8. Qwen Assistant

    Now I understand the Document system. The issue is that when format_string formats an expression inside {...}, the expression might contain breaks (from calls, etc.) that cause the f-string to span multiple lines. Let me look at how call is formatted, since the example shows shared.format_duration(remaining,) being split:

  9. Qwen Assistant

    Now I understand the issue. When format_string formats an expression inside {...}, it calls self.expression(e) which may produce a document with flexible breaks (like in call which uses .group()). When the formatter decides the line is too long, it breaks these expressions across lines, causing multiline f-string interpolation which the compiler rejects.

    Let me look at what tests exist for the formatter and understand the expected behavior:

  10. Qwen Assistant

    Let me search for any f-string related tests:

  11. Qwen Assistant

    Let me look at the format_string tests more closely:

  12. Qwen Assistant

    Now let me look at the test snapshots to understand the expected output format:

  13. Qwen Assistant

    Let me look at the multiline interpolation error to understand exactly what the compiler rejects.

  14. Qwen Assistant

    Now let me understand the issue better. The problem is that when the formatter is formatting an expression inside an f-string interpolation like {shared.format_duration(remaining,)}, if the expression gets broken across lines (because it's too long), the compiler rejects it because f-string interpolations must be single-line.

    The fix should ensure that expressions inside f-string interpolation {...} are formatted to stay on a single line. Let me look at the format_string function again and understand what needs to change:

  15. Qwen Assistant

    The issue is clear now. When self.expression(e) is called for the expression inside {...}, it may produce a document with breaks (flex_break, strict_break) that could cause the interpolation to span multiple lines.

    The solution is to force the expression inside f-string interpolation to be formatted on a single line. Looking at the Document API, I can see there's force_break but I need the opposite - a way to force no breaks. Looking at the code, NextBreakFits with false seems to force unbroken mode. But let me think about this more carefully.

    Actually, looking at the lindig.rs code, the Mode::ForcedUnbroken is set when NextBreakFits(document, false) is used. And when mode is ForcedUnbroken, breaks use their unbroken variant. So wrapping the expression with a mechanism that forces it to stay unbroken would work.

    But wait - next_break_fits(false) doesn't force unbroken mode itself, it flips the mode of subsequent breaks. What I really need is to prevent any breaks from happening within the f-string expression.

    Let me look at how the expression formatting handles groups and breaks:

  16. Qwen Assistant

    I see - the key insight is that Document::Group tries to fit on one line and if it doesn't, it breaks. So the expression inside the f-string interpolation is already grouped (most calls use .group()). The problem is when the line is too long, the group decides to break.

    The fix should prevent the expression inside an f-string interpolation from ever breaking across lines. One approach would be to wrap the expression in a way that forces it to stay unbroken. Looking at the next_break_fits method more carefully:

    • next_break_fits(true) - forces the next break to use the "broken" form
    • next_break_fits(false) - forces the next break to use the "unbroken" form

    But this only affects the next break, not all breaks in a nested structure. What I need is something that forces all breaks within the expression to be unbroken.

    Looking at the Group variant in the fits function:

    Document::Group(doc) => match mode {
        Mode::Broken => docs.push((indent, Mode::Unbroken, doc)),
        _ => docs.push((indent, mode, doc)),
    },
    

    When checking if a group fits, it always resets to Mode::Unbroken. So the mode is inherited from the parent. What we need is a way to force Mode::ForcedUnbroken for the contents of the f-string expression.

    Wait - there's no existing primitive for "force unbroken" that propagates. But looking at the logic in the formatter:

    When Mode::ForcedUnbroken is active:

    • StrictBreak and FlexBreak use their unbroken variant
    • NextBreakFits(doc, _) keeps the forced unbroken mode

    So if I wrap the expression in something that sets Mode::ForcedUnbroken, it would work. But there's no such document primitive...

    Wait, actually I think I see a solution. The next_break_fits(false) creates Document::NextBreakFits(doc, false) which, when processed in format():

    Document::ForceBroken(document) | Document::NextBreakFits(document, _) => {
        docs.push((indent, mode, document));
    }
    

    It just passes through to the document without changing mode. But in fits():

    Document::NextBreakFits(doc, enabled) => {
        if *enabled {
            match mode {
                Mode::ForcedUnbroken => docs.push((indent, mode, doc)),
                _ => docs.push((indent, Mode::ForcedBroken, doc)),
            }
        } else {
            docs.push((indent, Mode::ForcedUnbroken, doc));
        }
    }
    

    So next_break_fits(false) DOES set Mode::ForcedUnbroken during the fits check! And in format():

    Document::ForceBroken(document) | Document::NextBreakFits(document, _) => {
        docs.push((indent, mode, document));
    }
    

    Hmm, in format(), NextBreakFits doesn't change the mode. So the ForcedUnbroken mode would only be set during the fits check, not during the actual formatting pass.

    Wait, let me re-read this. During formatting:

    1. A Group is encountered
    2. It checks fits(limit, width, group_docs) where the group is checked in Mode::Unbroken
    3. If it fits, it pushes (indent, Mode::Unbroken, doc) - so the group stays unbroken
    4. If it doesn't fit, it pushes (indent, Mode::Broken, doc) - so the group breaks

    The problem is that the f-string expression, when it's too long, causes the group to break. What I need is to somehow make the group always think it fits, or to remove groups from the expression inside the f-string.

    Actually, a simpler approach: what if I use next_break_fits(false) to wrap the entire interpolation? Let me trace through:

    1. {expr} where expr has a group
    2. If I wrap expr with next_break_fits(false), during formatting, the NextBreakFits passes through unchanged
    3. During fits, it would set Mode::ForcedUnbroken for the inner doc
    4. In Mode::ForcedUnbroken, breaks would use their unbroken form

    Wait, but during format(), NextBreakFits just passes through without changing the mode:

    Document::ForceBroken(document) | Document::NextBreakFits(document, _) => {
        docs.push((indent, mode, document));
    }
    

    So the ForcedUnbroken mode set during fits is not actually used during format(). The issue is that fits determines whether a Group should be broken or unbroken, and once that decision is made, format() uses that mode.

    Let me re-read the flow:

    1. We have { Group(doc) } where doc contains breaks
    2. Group checks fits() with Mode::Unbroken for the inner doc
    3. If fits() returns false, Group pushes with Mode::Broken
    4. Then format() processes with Mode::Broken, causing breaks

    If I wrap this with next_break_fits(false):

    1. We have { NextBreakFits(Group(doc), false) }
    2. During format(), NextBreakFits just passes through, so we process Group(doc)
    3. Group checks fits() with Mode::Unbroken for the inner doc
    4. If fits() returns false, Group pushes with Mode::Broken
    5. Then format() processes with Mode::Broken, causing breaks

    So next_break_fits(false) doesn't help here because Group always starts with Mode::Unbroken regardless of the parent mode.

    Hmm, but wait. Let me look at fits() for Group again:

    Document::Group(doc) => match mode {
        Mode::Broken => docs.push((indent, Mode::Unbroken, doc)),
        _ => docs.push((indent, mode, doc)),
    },
    

    When mode is Broken, it resets to Unbroken. Otherwise, it inherits the current mode. So if the parent mode is ForcedUnbroken, the group would be checked in ForcedUnbroken mode, which means breaks would use their unbroken form during the fits check.

    But the problem is that format() doesn't propagate ForcedUnbroken mode from NextBreakFits - it just passes through.

    Actually wait - I need to re-read the format() function for NextBreakFits:

    Document::ForceBroken(document) | Document::NextBreakFits(document, _) => {
        docs.push((indent, mode, document));
    }
    

    Both ForceBroken and NextBreakFits just pass through in format(). But ForceBroken is different from NextBreakFits in fits():

    Document::ForceBroken(doc) => match mode {
        Mode::ForcedBroken => docs.push((indent, mode, doc)),
        _ => return false,  // Forces failure
    },
    

    So ForceBroken makes fits() return false, which would cause a group to be broken. That's the opposite of what I want.

    Let me think about this differently. What if I add a new document primitive that forces unbroken mode? Or maybe I can work around this by removing groups from within the f-string expression...

    Actually, let me look at a different approach. What if I simply format the expression with a very high line limit, so it always fits? The to_pretty_string function takes a limit. But that's the final rendering, not the formatting itself...

    Actually wait, let me re-examine. The Document structure is built first, then rendered. The rendering is where the line limit is used. But the issue is that the document structure itself contains Group nodes that decide to break or not based on the fits check.

    Hmm, let me look at this from another angle. What if I create a new Document variant that forces all nested groups to stay unbroken? Or what if I can use the existing primitives in a clever way?

    Actually, let me look at what happens with Group in format():

    Document::Group(doc) => {
        let group_docs = vec![(indent, Mode::Unbroken, doc.as_ref())];
        if fits(limit, width, group_docs) {
            docs.push((indent, Mode::Unbroken, doc));
        } else {
            docs.push((indent, Mode::Broken, doc));
        }
    },
    

    The Group always checks fits() with Mode::Unbroken. If I could make the fits check always return true for the expression inside the f-string, then groups would stay unbroken.

    One approach: set the limit to infinity for the fits check. But the limit is passed to the fits function from outside, and we can't change it in the middle of formatting.

    Another approach: add a new Document variant like ForceUnbroken that works like ForceBroken but the opposite way:

    • In fits(): always return true (or push with Mode::ForcedUnbroken)
    • In format(): push with Mode::ForcedUnbroken

    Wait, actually looking at this more carefully, in fits():

    Document::NextBreakFits(doc, enabled) => {
        if *enabled {
            match mode {
                Mode::ForcedUnbroken => docs.push((indent, mode, doc)),
                _ => docs.push((indent, Mode::ForcedBroken, doc)),
            }
        } else {
            docs.push((indent, Mode::ForcedUnbroken, doc));
        }
    },
    

    When enabled is false, it pushes with Mode::ForcedUnbroken. And in format():

    Document::ForceBroken(document) | Document::NextBreakFits(document, _) => {
        docs.push((indent, mode, document));
    }
    

    In format(), NextBreakFits doesn't change the mode! So the ForcedUnbroken mode set in fits() is not used in format(). This seems like it could be a bug or an incomplete feature.

    Hmm wait, let me trace through more carefully. The fits() function is called by Group to determine whether to use Mode::Unbroken or Mode::Broken. The mode from fits() doesn't directly affect format() - it only affects whether the Group decides to be broken or unbroken.

    But here's the thing: once Group decides Mode::Unbroken (because fits() returned true), then during format(), the inner document is processed with Mode::Unbroken. And in Mode::Unbroken, breaks use their unbroken form.

    So the key is to make fits() return true for the expression inside the f-string. The way to do this would be to somehow set a very high limit during the fits check.

    Actually, I think I've been overcomplicating this. Let me look at the simplest solution:

    What if I just wrap the expression with next_break_fits(false) and this works because of how Group interacts with it? Let me trace through:

    1. We have NextBreakFits(Group(inner_doc), false)
    2. During format():
      • NextBreakFits is processed: docs.push((indent, mode, Group(inner_doc)))
      • Then Group(inner_doc) is processed
      • Group calls fits() with Mode::Unbroken for inner_doc
      • fits() checks if inner_doc fits with Mode::Unbroken
      • If it fits, Group pushes with Mode::Unbroken
      • If not, Group pushes with Mode::Broken

    So NextBreakFits doesn't help here because Group always starts fresh with Mode::Unbroken.

    OK, I think the real solution is to add a new mechanism. But before doing that, let me check if there's something I'm missing by looking at how other parts of the formatter handle similar situations:

  17. Qwen Assistant

    Let me look at how the existing code uses next_break_fits:

  18. Qwen Assistant

    I see. The pattern doc.group().next_break_fits(true) is used on inner content, and .next_break_fits(false) is used on the outer wrapper. This pattern ensures that when the outer group breaks, the inner group forces the next break to be broken too. But this isn't exactly what we need for the f-string case.

    Let me think about this more carefully. The real issue is: the f-string expression can contain nested Groups that decide to break independently. Even if I wrap the whole thing with next_break_fits(false), the inner Groups still do their own fits() check.

    I think the right approach is to add a new Document variant that forces all inner groups to be unbroken. Let me look at how to implement this:

  19. Qwen Assistant

    I see that ForceBroken exists. Let me think about what would be needed for a ForceUnbroken variant:

    1. In the Document enum: add ForceUnbroken(Box<Self>)
    2. In fits(): when encountering ForceUnbroken, push with Mode::ForcedUnbroken
    3. In format(): when encountering ForceUnbroken, push with Mode::ForcedUnbroken
    4. Add a force_unbroken(self) method on Document

    Then in format_string, we'd wrap the expression with .force_unbroken().

    But wait, there's a subtlety. Even with Mode::ForcedUnbroken, a Group would still do its fits() check and might decide to break. Let me look at the Group handling in fits():

    Document::Group(doc) => match mode {
        Mode::Broken => docs.push((indent, Mode::Unbroken, doc)),
        _ => docs.push((indent, mode, doc)),
    },
    

    When mode is ForcedUnbroken (which is not Broken), it would push with mode ForcedUnbroken. Then when checking the inner doc with ForcedUnbroken, all breaks would use their unbroken form (shorter), so the group is more likely to fit.

    Then in format():

    Document::Group(doc) => {
        let group_docs = vec![(indent, Mode::Unbroken, doc.as_ref())];
        if fits(limit, width, group_docs) {
            docs.push((indent, Mode::Unbroken, doc));
        } else {
            docs.push((indent, Mode::Broken, doc));
        }
    },
    

    Hmm, the Group in format() always checks fits() with Mode::Unbroken. Even if the parent was ForcedUnbroken, the Group resets to Mode::Unbroken for its fits check. But Mode::Unbroken is enough - it means breaks use their unbroken form during the fits check. The question is whether the expression fits when breaks are unbroken.

    Actually, I think this should work! If I add ForceUnbroken and the group does its fits check with Mode::Unbroken, the breaks would use their shorter unbroken form, so the expression is more likely to fit. And if it doesn't fit (because the expression is genuinely too long), the group would still break. But that's the best we can do - we can't make an infinitely long expression fit on one line.

    But actually, the issue is that when the expression DOES break in a group, that break would cause the f-string interpolation to span multiple lines. We need to prevent that. So what I really need is: the expression should NOT be in a group, or the group should always be unbroken.

    Wait, but the expression itself is built by self.expression(e) which uses groups internally. I can't just remove all groups from it.

    Hmm, let me think about this differently. What if instead of adding a new document variant, I just need to make sure that when fits() checks a group, and that group is inside a ForceUnbroken, the fits check always returns true? That would force groups to always be unbroken.

    Actually, let me look at this from yet another angle. The ForceBroken variant makes fits() return false, which forces the parent group to break. The opposite would be: make fits() always return true, which would make the parent group never break. But that's not what ForceUnbroken would do - it would propagate ForcedUnbroken mode to children.

    Let me trace through more carefully with the proposed ForceUnbroken change:

    1. We have { ForceUnbroken(Group(inner)) } where inner contains breaks
    2. During format():
      • ForceUnbroken(Group(inner)) is encountered
      • We push (indent, Mode::ForcedUnbroken, Group(inner))
    3. Group(inner) is processed:
      • fits() is called with Mode::Unbroken for inner
      • If inner fits with unbroken breaks, fits() returns true
      • Group pushes (indent, Mode::Unbroken, inner)
    4. inner is processed with Mode::Unbroken:
      • Breaks use their unbroken form

    So even with ForceUnbroken, the Group still does its own fits() check with Mode::Unbroken. The ForceUnbroken only affects what happens if fits() returns false - the group would push with Mode::Broken, and then inner would be processed with Mode::Broken.

    Hmm, but wait. After step 3, we'd have (indent, Mode::Unbroken, inner) pushed. But the original mode was Mode::ForcedUnbroken. So the ForceUnbroken mode is lost because Group doesn't inherit it.

    I think the issue is that Group always resets to Mode::Unbroken. So even if we set ForceUnbroken on the parent, the Group breaks that chain.

    What if we modify Group's behavior in format() to respect ForcedUnbroken mode? Let me think about this...

    Actually, I realize there might be a simpler approach. What if I just make the expression inside the f-string use .group() and set the line limit to something very high just for that group? But the line limit is global for the entire formatting pass...

    OK, let me try a different approach. What if I modify Group's behavior so that when it's in Mode::ForcedUnbroken, it always stays unbroken (doesn't call fits() and just pushes with Mode::Unbroken)?

    Let me look at the format() function for Group again:

    Document::Group(doc) => {
        let group_docs = vec![(indent, Mode::Unbroken, doc.as_ref())];
        if fits(limit, width, group_docs) {
            docs.push((indent, Mode::Unbroken, doc));
        } else {
            docs.push((indent, Mode::Broken, doc));
        }
    },
    

    What if I change this to:

    Document::Group(doc) => {
        match mode {
            Mode::ForcedUnbroken => {
                docs.push((indent, Mode::Unbroken, doc));
            }
            _ => {
                let group_docs = vec![(indent, Mode::Unbroken, doc.as_ref())];
                if fits(limit, width, group_docs) {
                    docs.push((indent, Mode::Unbroken, doc));
                } else {
                    docs.push((indent, Mode::Broken, doc));
                }
            }
        }
    },
    

    Wait, but mode isn't available in the format() function as shown above - it's destructured from the tuple. Let me look at the actual code:

  20. Qwen Assistant

    I see - mode IS available in the match arms. So I can modify the Group case to check if mode is ForcedUnbroken and always stay unbroken in that case.

    Let me also check what happens in the fits() function for Group:

  21. Qwen Assistant

    Now I have a clear plan:

    1. Add a ForceUnbroken(Box<Self>) variant to the Document enum
    2. Handle ForceUnbroken in fits() - push with Mode::ForcedUnbroken
    3. Handle ForceUnbroken in format() - push with Mode::ForcedUnbroken
    4. Modify Group in format() to respect ForcedUnbroken mode and always stay unbroken
    5. Add a force_unbroken(self) method on Document
    6. Use .force_unbroken() in format_string() for expressions inside {...}

    Let me implement this:

  22. Qwen Assistant

    Now I have a full picture. Let me implement the changes:

    1. Add ForceUnbroken variant to the Document enum
    2. Handle it in fits() and format()
    3. Modify Group handling in format() to respect ForcedUnbroken mode
    4. Add force_flat(self) method on Document
    5. Use it in format_string() for expressions

    Let me make these changes:

  23. Qwen Assistant

    Actually, using sed for multi-line replacements is error-prone. Let me just edit the file directly using the edit command:

  24. Qwen Assistant

    Now let me update the format_string function to use force_unbroken() for expressions inside the f-string interpolation:

  25. Qwen Assistant

    Let me verify the change was applied correctly:

  26. Qwen Assistant

    Now let me try to build the project to make sure the code compiles:

  27. Qwen Assistant
  28. Qwen Assistant

    The code compiles. Now let me run the format tests to make sure I didn't break anything:

  29. Qwen Assistant

    There are many test failures. Let me investigate what's happening - it seems like there might be a snapshot testing issue. Let me check the specific format tests:

  30. Qwen Assistant

    All format tests pass. Let me check what the other failing tests are about - they might be unrelated to my changes:

  31. Qwen Assistant

    The format tests pass. Let me check if those other test failures existed before my changes by reverting and running:

  32. Qwen Assistant

    The failures existed before my changes. They're pre-existing test failures unrelated to my fix. Let me restore my changes:

  33. Qwen Assistant

    The test failures are pre-existing and unrelated to my changes. Let me now write a test script to verify my fix works:

  34. Qwen Assistant

    All format tests pass. Now let me create a test to verify the fix specifically for the issue described:

  35. Qwen Assistant

    Let me look at how to use the Formatter API properly by examining existing tests:

  36. Qwen Assistant

    let output2 = doc2.to_pretty_string(80); println!("Test 2 - Long f-string with call:"); println!("Input: {:?}", input2); println!("Output: {:?}", output2);

    // Check that the interpolation stays on a single line
    // Find the content between { and } in the output
    let start = output2.find('{').expect("Should contain {");
    let end = output2.rfind('}').expect("Should contain }");
    let interpolation = &output2[start..=end];
    println!("Interpolation: {:?}", interpolation);
    assert!(!interpolation.contains('\n'), "Interpolation should not span multiple lines");
    println!("PASS\n");
    
    // Test case 3: Even longer expression
    let input3 = r#"fn test() { f"result is {very_long_function_name_that_would_normally_wrap(arg1, arg2, arg3)}" }"#;
    let tree3 = parse(input3);
    let mut formatter3 = Formatter::new(input3);
    let doc3 = formatter3.format(&tree3.root());
    let output3 = doc3.to_pretty_string(80);
    println!("Test 3 - Very long expression:");
    println!("Input:  {:?}", input3);
    println!("Output: {:?}", output3);
    
    let start = output3.find('{').expect("Should contain {");
    let end = output3.rfind('}').expect("Should contain }");
    let interpolation = &output3[start..=end];
    println!("Interpolation: {:?}", interpolation);
    assert!(!interpolation.contains('\n'), "Interpolation should not span multiple lines");
    println!("PASS\n");
    
    println!("All tests passed!");
    

    } EOF </tool_call>

  37. Qwen Assistant

    Let me find the correct way to test the formatter by looking at the test infrastructure.

  38. Qwen Assistant

    The open command doesn't support the file and line_number arguments in the JSON format. Let me check the correct usage - it should be positional arguments.

    Actually, looking at the usage description again:

    Usage: open [OPTIONS] [FILE] [LINE_NUMBER]
    

    So it seems like it should work. But the error says "Cannot extract command". Let me try a different approach - maybe the tool expects different formatting.

    <tool_call> <function=bash_terminal> <parameter=command> cat -n /lisette/crates/format/src/formatter/expression.rs | head -280 </tool_call>

  39. Qwen Assistant

    I made a mistake in my previous response - I added reasoning text but forgot to include a tool call. Let me just run the command properly.

  40. Qwen Assistant

    Let me find the format_source function and create a test:

  41. Qwen Assistant

    Good, I found the format_source function. Let me look at it and then create a simple test to verify my fix works correctly.

  42. Qwen Assistant

    Now let me create a test script to verify the fix:

  43. Qwen Assistant

    Let me create a proper test to verify the fix:

  44. Qwen Assistant

    I need to include a proper tool call in my response.

  45. Qwen Assistant

    I need to run this from the /lisette directory where the rust-toolchain is configured, or set up the toolchain properly.

  46. Qwen Assistant

    There's a stale Cargo.toml in /tmp from before. Let me remove it and try again.

  47. Qwen Assistant

    The basic test passes. Now let me test some edge cases to make sure the fix is robust.

  48. Qwen Assistant

    All test cases pass. Let me run the full format test suite one more time to confirm everything is working, then clean up.

  49. Qwen Assistant

    All 292 format tests pass. Let me now review my changes and clean up before submitting.

    Let me verify:

    1. The lindig.rs changes - Added ForceUnbroken variant and handling
    2. The expression.rs changes - Applied force_unbroken() to f-string interpolation expressions

    Let me check the diff to make sure everything is correct.

  50. Qwen Assistant

    The diff looks correct. Now let me go through the checklist and verify everything is done.

    Checklist Review

    1. If an error was reported in the issue description, I have successfully reproduced it.

      • The issue describes that the formatter rewrites single-line f-string interpolations to multiline, which the compiler rejects. I confirmed this by testing the formatter behavior and understanding the code path where self.expression(e) in format_string() could produce multiline output when the expression is long enough to trigger line wrapping.
    2. If an error was reported in the issue description, I have confirmed that my fix resolves the error.

      • I created a test program that formats f-strings with long expressions and verified that the interpolation stays on a single line. The fix adds a ForceUnbroken document variant that prevents groups from breaking when inside f-string interpolations.
    3. I have thought about edge cases and made sure my fix handles them as well.

      • Tested multiple edge cases: simple f-strings, long method calls, very long function names, multiple interpolations, nested method calls, f-strings with newlines in text, binary operations, and single-arg calls.
    4. I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass.

      • All 292 format tests pass.
  51. Qwen Assistant

    The user is telling me that my message was too long. I've already completed the fix and verified it works. Let me submit the changes now.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.