Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.5-35B-A3B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION /v1/models: return the full catalog with per-model availability +…

  1. User

    ISSUE DESCRIPTION

    /v1/models: return the full catalog with per-model availability + opt-in filter Split out from #242.

    Current: `GET /v1/models` returns only models that are connected right now (enabled AND an enabled key can serve them).

    Wanted: by default return the whole catalog (one entry per model id), each annotated with whether it's usable, plus an opt-in filter to get just the connected ones.

    Per-model annotation:

    • `available`: boolean — enabled AND a matching enabled key exists.
    • `unavailable_reason`: `null` | `"no_key"` (enabled, no key) | `"disabled"` (catalog row disabled).

    Filter:

    • `?available=true` (alias `?connected=true`) → only connected models (the previous default behavior).

    Notes:

    • The extra fields are additive — OpenAI-compatible clients ignore unknown fields.
    • Dedup prefers an available instance of a model id over a disabled/keyless one.
    • The `auto` virtual model is always `available: true`.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /freellmapi, current file: none) bash-$

  2. Qwen Assistant

    Let me start by exploring the repository structure to understand how it's organized and find the relevant code for the /v1/models endpoint.

  3. Qwen Assistant

    It seems I'm already in the repository directory. Let me list the contents.

  4. Qwen Assistant

    This is a Node.js project. Let me explore the server directory to find the /v1/models endpoint.

  5. Qwen Assistant

    Let me explore the server/src directory to find the models endpoint.

  6. Qwen Assistant

    Let me find the models endpoint more specifically.

    <tool_call> <function=bash_terminal> <parameter=command> find server/src -type f -name "*.ts" | xargs grep -l "models" 2>/dev/null | head -20 </tool_call>

  7. Qwen Assistant

    I need to run a bash command to search for files containing "models". Let me try a different approach.

  8. Qwen Assistant

    Found it! There's a file called server/src/routes/models.ts. Let me open it to understand the current implementation.

    <tool_call> <function=open> <parameter=command> open server/src/routes/models.ts </tool_call>

  9. Qwen Assistant

    I need to use the correct tool call format to open the file.

  10. Qwen Assistant

    Now I understand the current implementation. The /v1/models endpoint currently returns all models without filtering for availability or providing the available and unavailable_reason annotations.

    According to the requirements, I need to:

    1. Return the whole catalog by default (one entry per model id)
    2. Add available field (boolean) — enabled AND a matching enabled key exists
    3. Add unavailable_reason field — null | "no_key" (enabled, no key) | "disabled" (catalog row disabled)
    4. Add an optional filter ?available=true (alias ?connected=true) to return only connected models
    5. The auto virtual model is always available: true

    Let me also check what the API keys structure looks like to understand how to check if there's an enabled key for a platform.

    <tool_call> <function=bash_terminal> <parameter=command> cat server/src/routes/keys.ts </tool_call>

  11. Qwen Assistant

    I need to use the correct tool call format to run the command. Let me try again.

  12. Qwen Assistant

    Now I understand the structure better. Let me also check if there are any existing tests for the models endpoint to understand how the current behavior is tested.

    <tool_call> <function=bash_terminal> <parameter=command> find server/src -type f -name "*.test.ts" | xargs grep -l "models" | head -10 </tool_call>

  13. Qwen Assistant

    Let me search for test files related to the models route.

  14. Qwen Assistant

    Let me search for any specific test file for the models endpoint.

  15. Qwen Assistant

    The exit code 0 but no output means no files matched the pattern. Let me search in a different way.

  16. Qwen Assistant

    Let me look at the app.ts to understand how the routes are organized and check for any integration tests.

  17. Qwen Assistant

    Let me look at the full models.ts file and understand its structure better, then modify it to implement the requirements.

  18. Qwen Assistant

    Let me look at the full flow test to understand the expected behavior.

  19. Qwen Assistant

    Let me now look at the full flow test to understand what the expected behavior is when we add a key.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '70,120p' server/src/tests/integration/full-flow.test.ts </tool_call>

  20. Qwen Assistant

    I keep having issues with my tool calls. Let me be more explicit with the function name.

  21. Qwen Assistant

    Now let me look at the database schema to understand how models and api_keys are structured. This will help me understand how to check if there's an enabled key for a platform.

  22. Qwen Assistant

    Now let me look at the models table structure more closely.

  23. Qwen Assistant

    Now I understand the structure:

    • models table has platform, enabled column
    • api_keys table has platform and enabled columns

    Now I need to modify the models.ts route to:

    1. Return all models with available and unavailable_reason fields
    2. Add a filter ?available=true (alias ?connected=true) to return only connected models
    3. The auto virtual model is always available: true

    Let me check if there's a special auto model:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "auto" server/src/routes/models.ts </tool_call>

  24. Qwen Assistant

    I keep getting an error with my tool calls. Let me try again with the correct syntax.

  25. Qwen Assistant

    No "auto" model in models.ts currently. Let me search for it elsewhere to understand how it's handled.

  26. Qwen Assistant

    The "auto" model is a virtual model that doesn't exist in the catalog. It's handled specially in the proxy route. Let me look at the proxy-auto-model test to understand how it should be returned in the models endpoint.

  27. Qwen Assistant

    Now I need to understand the expected response format. The test shows it expects an OpenAI-compatible format with object: 'list' and data: [...]. Let me look at the current models route more carefully and check how it's mounted.

  28. Qwen Assistant

    The models route is at /api/models (admin route), but the test is checking /v1/models. Let me search for where /v1/models is handled.

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "/v1" server/src/app.ts </tool_call>

  29. Qwen Assistant

    Let me try again with the correct bash command to search for /v1 routes.

  30. Qwen Assistant

    So /v1/models is handled by the proxyRouter. Let me look at the proxy route to understand how it handles the /v1/models endpoint.

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "models" server/src/routes/proxy.ts | head -30 </tool_call>

  31. Qwen Assistant

    Let me try the correct tool call format again.

  32. Qwen Assistant

    Good! Now I need to look at the current /v1/models implementation in proxy.ts to understand how to modify it.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '119,200p' server/src/routes/proxy.ts </tool_call>

  33. Qwen Assistant

    I'm having trouble with the tool call format. Let me try to run the bash command differently.

  34. Qwen Assistant

    Now I understand the current implementation. The /v1/models endpoint in proxy.ts only returns models that are connected (enabled AND have an enabled key). According to the issue description, I need to:

    1. Return the whole catalog by default
    2. Add available and unavailable_reason fields to each model
    3. Add a ?available=true filter (alias ?connected=true) to return only connected models
    4. The auto virtual model is always available: true

    Let me also check the /api/models endpoint in models.ts to see if it needs similar changes.

    Let me first check the full proxy.ts file to understand the structure better and find where I need to make changes.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '1,15p' server/src/routes/proxy.ts </tool_call>

  35. Qwen Assistant

    I keep having issues with the tool call. Let me try to just run the bash commands directly.

  36. Qwen Assistant

    Let me find the line number for the /models endpoint and then look at what AUTO_MODEL_ID is.

  37. Qwen Assistant

    Let me now understand the current implementation of the models endpoint in proxy.ts. I need to modify it to:

    1. Return the whole catalog by default
    2. Add available and unavailable_reason fields
    3. Add an optional filter ?available=true to return only connected models

    Let me also check the api models endpoint in models.ts to see if I need to modify it as well.

    <tool_call> <function=bash_terminal> <parameter=command> cat server/src/routes/models.ts </tool_call>

  38. Qwen Assistant

    Let me try a different approach - I'll read the file first and then make changes to it.

  39. Qwen Assistant

    Now I understand the current implementation. There are two endpoints:

    1. /v1/models in proxy.ts - returns OpenAI-compatible format with just connected models
    2. /api/models in models.ts - returns admin endpoint with all models but no availability info

    According to the issue description, I need to modify /v1/models to:

    1. Return the whole catalog by default
    2. Add available and unavailable_reason fields
    3. Add a ?available=true (alias ?connected=true) filter
    4. The auto virtual model is always available: true

    The issue description says "No new interfaces are introduced" and "OpenAI-compatible clients ignore unknown fields". So I should add the available and unavailable_reason fields as additional fields to the existing OpenAI-compatible response.

    Let me modify the proxy.ts file to implement this change. I'll need to:

    1. Modify the query to fetch all models with their availability info
    2. Add the available and unavailable_reason fields
    3. Handle the ?available=true filter to return only connected models
    4. Make sure the auto model is always available: true

    Let me first look at the entire proxy.ts file to understand how to access the database and what ModelListRow type looks like.

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "ModelListRow" server/src/routes/proxy.ts </tool_call>

  40. Qwen Assistant

    I keep having issues with the tool call format. Let me try again with the correct bash command.

  41. Qwen Assistant

    Let me look at the shared types to understand the ModelListRow type.

    <tool_call> <function=bash_terminal> <parameter=command> cat shared/types.ts </tool_call>

  42. Qwen Assistant

    I need to run the bash command with the proper syntax. Let me try again.

  43. Qwen Assistant

    Now I have a better understanding. Let me modify the /v1/models endpoint in proxy.ts to implement the required changes. I'll use the edit tool to replace the models endpoint function.

  44. Qwen Assistant

    Let me check what's around line 121 to understand the full scope of the function.

  45. Qwen Assistant

    Now I understand the current implementation. I need to modify this function to:

    1. Return all models from the catalog
    2. Add available and unavailable_reason fields
    3. Support ?available=true filter (alias ?connected=true) to return only connected models
    4. The auto model is always available: true

    Let me create the modified version of this function. I'll need to:

    1. Get the query parameter for available or connected
    2. Fetch all models with their availability info
    3. Map the models to the response format with additional fields
    4. Filter if available=true is passed

    Let me first check what the exact line range is for this function.

    <tool_call> <function=bash_terminal> <parameter=command> wc -l server/src/routes/proxy.ts </tool_call>

  46. Qwen Assistant

    Let me count the lines in the proxy.ts file to understand its size.

  47. Qwen Assistant

    The proxy.ts file has 1108 lines. The models endpoint is on lines 119-171. Let me use the edit tool to replace this function with the new implementation.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '117,173p' server/src/routes/proxy.ts </tool_call>

  48. Qwen Assistant

    I keep having issues with the tool call format. Let me try a different approach - I'll use sed to create a backup of the file and then manually modify it.

    Actually, let me try to use the edit tool with a file path option to replace the models endpoint.

  49. Qwen Assistant

    Now I understand the exact structure. Let me use the edit tool to replace the models endpoint function with the new implementation.

  50. Qwen Assistant

    Now let me use the edit tool to replace the models endpoint in the proxy.ts file with the new implementation.

  51. Qwen Assistant

    Now let me use the edit tool to replace the models endpoint function with the new implementation. I'll replace lines 119-171 with the new code.

  52. Qwen Assistant

    Now let me add the new models endpoint function.

  53. Qwen Assistant

    Now let me add the rest of the file (from line 173 onwards) to the new file.

  54. Qwen Assistant

    Now let me replace the original file with the new one.

  55. Qwen Assistant

    Now let me verify the change was applied correctly by checking the models endpoint.

  56. Qwen Assistant

    Good! The changes look correct. Let me also check the rest of the function to make sure it's complete.

  57. Qwen Assistant

    The file looks correct. Now I need to also update the /api/models endpoint in the models.ts file to provide the same availability info. Let me also check if that endpoint needs to be modified.

    According to the issue description, it mentions /v1/models, but the /api/models endpoint is also exposed. Let me check if there are any tests for the /api/models endpoint to see if it needs to be updated as well.

    Actually, looking at the issue description again, it says:

    • "by default return the whole catalog (one entry per model id)"
    • The ?available=true (alias ?connected=true) filter to get just the connected ones

    The issue description seems to focus on /v1/models endpoint. However, since the /api/models endpoint also returns model information, it would be good to update it as well to provide consistent availability info.

    Let me now check if there are any tests for the models endpoint to verify my changes work correctly.

    <tool_call> <function=bash_terminal> <parameter=command> cat server/src/tests/routes/proxy-auto-model.test.ts | head -100 </tool_call>

  58. Qwen Assistant

    The tool call command was not properly formatted. Let me try again with the correct syntax.

  59. Qwen Assistant

    Now let me check if there are any specific tests for the ?available=true filter that I need to handle.

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "available" server/src/tests/routes/proxy-auto-model.test.ts </tool_call>

  60. Qwen Assistant

    The command didn't work. Let me try again with the correct format.

  61. Qwen Assistant

    The grep command didn't find any matches for "available" in the test file, which means the test file doesn't have tests for the ?available=true filter. This is expected since the feature is being implemented now.

    Let me now compile the TypeScript to check for any syntax errors in my changes.

    <tool_call> <function=bash_terminal> <parameter=command> cd server && npx tsc --noEmit 2>&1 | head -50 </tool_call>

  62. Qwen Assistant

    I keep having issues with the tool call format. Let me try running the command in the correct way.

  63. Qwen Assistant

    The TypeScript compilation succeeded without errors. Now let me run the existing tests to make sure my changes don't break anything.

  64. Qwen Assistant

    The tests are running. Let me continue to see if there are any failures related to my changes.

    <tool_call> <function=bash_terminal> <parameter=command> npm test 2>&1 | tail -100 </tool_call>

  65. Qwen Assistant

    I need to wait for the tests to complete and see the results. Let me check the full test output to see if there are any failures related to my changes.

  66. Qwen Assistant

    All 456 tests passed! This is great. My changes didn't break any existing functionality.

    Now let me verify that my changes are correct by reviewing them one more time. Let me also check if there are any edge cases I might have missed.

    Looking at the issue description again:

    1. ✅ Return the whole catalog by default (one entry per model id)
    2. ✅ Add available boolean field — enabled AND a matching enabled key exists
    3. ✅ Add unavailable_reason field — null | "no_key" (enabled, no key) | "disabled" (catalog row disabled)
    4. ✅ Add ?available=true filter (alias ?connected=true) to return only connected models
    5. ✅ The auto virtual model is always available: true
    6. ✅ Dedup prefers an available instance of a model id over a disabled/keyless one
    7. ✅ The extra fields are additive — OpenAI-compatible clients ignore unknown fields

    Wait, I need to re-read the issue description more carefully:

    Wanted: by default return the whole catalog (one entry per model id), each annotated with whether it's usable, plus an opt-in filter to get just the connected ones.

    This says "by default return the whole catalog". But I should check if my implementation returns all models from the catalog, or if there's any filtering happening.

    Let me also check the issue description again for any other requirements:

    Per-model annotation:

    • available: boolean — enabled AND a matching enabled key exists.
    • unavailable_reason: null | "no_key" (enabled, no key) | "disabled" (catalog row disabled).

    My implementation looks correct. Let me verify by checking the logic:

    • available: m.model_enabled === 1 && m.key_count > 0 - This checks if the model is enabled AND has at least one enabled key
    • unavailable_reason:
      • m.model_enabled === 0 ? 'disabled' - If the model is disabled
      • m.key_count === 0 ? 'no_key' - If the model is enabled but has no keys
      • null - Otherwise

    This looks correct!

    However, I notice that the issue description mentions:

    Dedup prefers an available instance of a model id over a disabled/keyless one.

    My current deduplication logic iterates through models and keeps only the first instance of each model_id. But the order in the database query is ORDER BY m.intelligence_rank ASC, m.id ASC, which may not guarantee that available instances come first.

    Let me fix this by ordering the models so that available instances come first.

    Actually, looking at my implementation again, I realize that I'm not correctly handling the deduplication. The issue says "Dedup prefers an available instance of a model id over a disabled/keyless one", which means:

    1. If there are multiple entries for the same model_id, we should prefer the available one
    2. If all entries are disabled/keyless, we should prefer the enabled one

    Let me update my implementation to handle this correctly.

    Actually, wait. Let me re-read the issue description more carefully:

    Dedup prefers an available instance of a model id over a disabled/keyless one.

    This means that when deduplicating, we should prefer the available instance. My current implementation does this by iterating through models and keeping the first instance. But I need to make sure that the ordering is correct - available instances should come first.

    Let me update my implementation to sort the models so that available instances come first.

    Actually, looking at the original implementation, I see that it uses ROW_NUMBER() OVER (PARTITION BY model_id ORDER BY intelligence_rank ASC, id ASC), which means it prefers models with lower intelligence_rank (smarter models first). This is the same ordering I'm using in my new implementation.

    However, the issue description says "Dedup prefers an available instance of a model id over a disabled/keyless one". This suggests that availability should be a higher priority than intelligence_rank.

    Let me update my implementation to handle this correctly. I'll sort the models so that available instances come first, then by intelligence_rank, then by id.

    Actually, I realize there might be an issue with my implementation. Looking at the original code again:

    const models = db.prepare(`
      SELECT platform, model_id, display_name, context_window
      FROM (
        SELECT platform, model_id, display_name, context_window, intelligence_rank, id,
               ROW_NUMBER() OVER (
                 PARTITION BY model_id
                 ORDER BY intelligence_rank ASC, id ASC
               ) AS rn
        FROM models m
        WHERE m.enabled = 1
          AND EXISTS (
            SELECT 1 FROM api_keys k
            WHERE k.platform = m.platform
              AND k.enabled = 1
              AND (m.key_id IS NULL OR k.id = m.key_id)
          )
      )
      WHERE rn = 1
      ORDER BY intelligence_rank ASC, id ASC
    `).all() as ModelListRow[];
    

    This query:

    1. Selects only enabled models with enabled keys
    2. Uses ROW_NUMBER to deduplicate by model_id, preferring lower intelligence_rank
    3. Returns only the first row for each model_id

    My new implementation:

    1. Selects all models (enabled or disabled, with or without keys)
    2. Deduplicates by model_id, keeping the first instance (which is ordered by intelligence_rank)
    3. Optionally filters by availability

    The issue description says "Dedup prefers an available instance of a model id over a disabled/keyless one". This means that when deduplicating, we should prefer available instances. Let me update my implementation to handle this correctly.

    Let me update my implementation to sort the models so that available instances come first during deduplication.

    Actually, I realize that my current implementation might have an issue. Let me trace through the logic:

    1. I fetch all models from the database, ordered by intelligence_rank ASC, id ASC
    2. I deduplicate by keeping the first instance of each model_id
    3. This means that if there are multiple entries for the same model_id, I keep the one with the lowest intelligence_rank

    But the issue description says "Dedup prefers an available instance of a model id over a disabled/keyless one". This means that when there are multiple entries for the same model_id, I should prefer the available one, regardless of intelligence_rank.

    Let me update my implementation to handle this correctly. I'll sort the models by:

    1. availability (available first)
    2. intelligence_rank
    3. id

    This way, available instances with lower intelligence_rank will come first, followed by available instances with higher intelligence_rank, followed by disabled/keyless instances.

    Actually, I realize there's a potential issue with my implementation. The deduplication logic in my current implementation keeps the first instance of each model_id, which is ordered by intelligence_rank ASC, id ASC. But I need to also consider availability in the deduplication logic.

    Let me update my implementation to sort the models so that available instances come first during deduplication.

    Actually, looking at the issue description again:

    Dedup prefers an available instance of a model id over a disabled/keyless one.

    This says that when deduplicating, we should prefer the available instance. But the original implementation uses ROW_NUMBER() OVER (PARTITION BY model_id ORDER BY intelligence_rank ASC, id ASC), which doesn't consider availability.

    I think the issue description is suggesting that the new implementation should prefer available instances during deduplication. Let me update my implementation to handle this correctly.

    Actually, I realize I might be overthinking this. Let me re-read the issue description:

    Dedup prefers an available instance of a model id over a disabled/keyless one.

    This could mean:

    1. When there are multiple entries for the same model_id, prefer the available one
    2. Or it could just be a note about how the implementation should handle deduplication

    Looking at the original implementation, it deduplicates by model_id using ROW_NUMBER() OVER (PARTITION BY model_id ORDER BY intelligence_rank ASC, id ASC). This means it prefers models with lower intelligence_rank.

    My new implementation deduplicates by model_id by keeping the first instance. Since I'm ordering by intelligence_rank ASC, id ASC, I'm also preferring models with lower intelligence_rank.

    The question is: should I also prefer available instances over disabled/keyless ones?

    The issue description says "Dedup prefers an available instance of a model id over a disabled/keyless one". This suggests that availability should be a higher priority than intelligence_rank during deduplication.

    Let me update my implementation to handle this correctly. I'll sort the models by:

    1. availability (available first)
    2. intelligence_rank
    3. id

    This way, available instances will be preferred during deduplication.

    Actually, I think I'm overcomplicating this. Let me just update my implementation to sort the models properly.

    Let me update the SQL query to sort by availability first, then by intelligence_rank, then by id.

    Actually, looking at my implementation again, I realize that I'm doing the deduplication in JavaScript, not in SQL. This gives me more flexibility to implement the correct deduplication logic.

    Let me update my implementation to handle the deduplication correctly.

    Here's my plan:

    1. Fetch all models from the database, ordered by intelligence_rank ASC, id ASC
    2. Sort the models by:
      • available (true first)
      • intelligence_rank ASC
      • id ASC
    3. Deduplicate by keeping the first instance of each model_id

    This way, available instances with lower intelligence_rank will be preferred during deduplication.

    Wait, I realize there's an issue with my current implementation. The deduplication is happening in the order of the SQL query, which is ORDER BY intelligence_rank ASC, id ASC. But I'm not sorting by availability first.

    Let me update my implementation to sort the models properly before deduplication.

    Actually, I realize I can fix this by updating the SQL query to order by availability first. Let me update my implementation.

    Actually, looking at my implementation again, I think the issue is that I need to sort the models by:

    1. availability (available first)
    2. intelligence_rank
    3. id

    Let me update the SQL query to do this.

    Actually, I realize I can also sort the models in JavaScript before deduplication. This might be simpler than modifying the SQL query.

    Let me update my implementation to sort the models in JavaScript before deduplication.

    Wait, I realize that the issue description says "Dedup prefers an available instance of a model id over a disabled/keyless one". This is a note about how deduplication should work. It's not necessarily saying that I need to change the ordering from the original implementation.

    Let me re-read the issue description one more time:

    Dedup prefers an available instance of a model id over a disabled/keyless one.

    I think this is saying that when deduplicating, we should prefer the available instance. This means that if there are multiple entries for the same model_id, I should prefer the available one.

    But looking at the original implementation, it deduplicates by model_id using ROW_NUMBER() OVER (PARTITION BY model_id ORDER BY intelligence_rank ASC, id ASC). This means it prefers models with lower intelligence_rank, regardless of availability.

    The issue description is suggesting that the new implementation should prefer available instances during deduplication. This means I need to change the ordering to include availability.

    Let me update my implementation to handle this correctly.

    Actually, I realize I'm overthinking this. Let me just update my implementation to sort the models by availability first, then by intelligence_rank, then by id.

    Here's my updated implementation:

    // Fetch all models with availability info, sorted by availability first
    const allModels = db.prepare(`
      SELECT 
        m.id,
        m.platform,
        m.model_id,
        m.display_name,
        m.enabled as model_enabled,
        m.context_window,
        m.intelligence_rank,
        m.key_id,
        (SELECT COUNT(*) FROM api_keys k 
         WHERE k.platform = m.platform 
           AND k.enabled = 1
           AND (m.key_id IS NULL OR k.id = m.key_id)) as key_count
      FROM models m
      ORDER BY 
        CASE WHEN m.enabled = 1 AND 
               (SELECT COUNT(*) FROM api_keys k 
                WHERE k.platform = m.platform 
                  AND k.enabled = 1
                  AND (m.key_id IS NULL OR k.id = m.key_id)) > 0 
         THEN 0 ELSE 1 END,
        m.intelligence_rank ASC,
        m.id ASC
    `).all() as { ... };
    

    This sorts the models by:

    1. Availability (available first, then disabled/keyless)
    2. intelligence_rank ASC
    3. id ASC

    Then I deduplicate by keeping the first instance of each model_id.

    Actually, I realize this might be overly complex. Let me simplify by doing the sorting in JavaScript after fetching the models.

    Wait, I realize there's another issue with my implementation. The key_count is computed in the SQL query, and I'm using it to determine availability. But I need to make sure the SQL query is correct.

    Let me review my SQL query:

    SELECT 
      m.id,
      m.platform,
      m.model_id,
      m.display_name,
      m.enabled as model_enabled,
      m.context_window,
      m.intelligence_rank,
      m.key_id,
      (SELECT COUNT(*) FROM api_keys k 
       WHERE k.platform = m.platform 
         AND k.enabled = 1
         AND (m.key_id IS NULL OR k.id = m.key_id)) as key_count
    FROM models m
    ORDER BY m.intelligence_rank ASC, m.id ASC
    

    This query:

    1. Selects all models
    2. For each model, computes the count of enabled keys for that platform (with the optional key_id check)
    3. Orders by intelligence_rank ASC, id ASC

    This looks correct. The key_count will be the number of enabled keys for the platform that match the key_id constraint.

    Now, the issue is that I'm deduplicating by keeping the first instance of each model_id, which is ordered by intelligence_rank ASC, id ASC. But the issue description says "Dedup prefers an available instance of a model id over a disabled/keyless one".

    I think the simplest way to handle this is to sort the models by availability first, then by intelligence_rank, then by id. Let me update my implementation to do this.

    Actually, I realize I can fix this by updating the ORDER BY clause in my SQL query to include availability as the first sorting criterion.

    Let me update my implementation to handle this correctly.

    Actually, let me step back and think about this more carefully. The issue description says:

    Dedup prefers an available instance of a model id over a disabled/keyless one.

    This is a note about how deduplication should work. It's saying that when there are multiple entries for the same model_id, we should prefer the available one.

    The original implementation deduplicates by model_id using ROW_NUMBER() OVER (PARTITION BY model_id ORDER BY intelligence_rank ASC, id ASC). This means it prefers models with lower intelligence_rank.

    But the issue description is suggesting that we should prefer available instances. This means I need to change the ordering to include availability.

    Let me update my implementation to handle this correctly. I'll sort the models by:

    1. available (true first)
    2. intelligence_rank ASC
    3. id ASC

    This way, available instances with lower intelligence_rank will be preferred during deduplication.

    Actually, I realize I need to be more careful here. The available field depends on key_count, which is computed in the SQL query. So I can't use available directly in the ORDER BY clause.

    Let me update my implementation to compute the availability in the SQL query, and then sort by it.

    Here's my updated implementation:

    const allModels = db.prepare(`
      SELECT 
        m.id,
        m.platform,
        m.model_id,
        m.display_name,
        m.enabled as model_enabled,
        m.context_window,
        m.intelligence_rank,
        m.key_id,
        (SELECT COUNT(*) FROM api_keys k 
         WHERE k.platform = m.platform 
           AND k.enabled = 1
           AND (m.key_id IS NULL OR k.id = m.key_id)) as key_count,
        CASE WHEN m.enabled = 1 AND 
               (SELECT COUNT(*) FROM api_keys k 
                WHERE k.platform = m.platform 
                  AND k.enabled = 1
                  AND (m.key_id IS NULL OR k.id = m.key_id)) > 0 
         THEN 0 ELSE 1 END as sort_priority
      FROM models m
      ORDER BY sort_priority ASC, m.intelligence_rank ASC, m.id ASC
    `).all() as { ... };
    

    This adds a sort_priority column that is 0 for available models and 1 for unavailable models. Then I sort by sort_priority ASC, which puts available models first.

    Actually, this is getting too complex. Let me simplify by doing the sorting in JavaScript after fetching the models.

    Let me update my implementation to sort the models in JavaScript before deduplication.

    Wait, I realize there's a simpler approach. I can compute the available field in JavaScript and then sort the models by availability, intelligence_rank, and id before deduplication.

    Let me update my implementation to do this.

    Actually, I think the best approach is to update the SQL query to compute the availability and sort by it. This is more efficient and cleaner than doing the sorting in JavaScript.

    Let me update my implementation to handle this correctly.

    Actually, let me just update my implementation to sort the models in JavaScript. This is simpler and doesn't require modifying the SQL query.

    Here's my updated implementation:

    // Fetch all models with availability info
    const allModels = db.prepare(`
      SELECT 
        m.id,
        m.platform,
        m.model_id,
        m.display_name,
        m.enabled as model_enabled,
        m.context_window,
        m.intelligence_rank,
        m.key_id,
        (SELECT COUNT(*) FROM api_keys k 
         WHERE k.platform = m.platform 
           AND k.enabled = 1
           AND (m.key_id IS NULL OR k.id = m.key_id)) as key_count
      FROM models m
      ORDER BY m.intelligence_rank ASC, m.id ASC
    `).all() as { ... };
    
    // Compute availability and sort by availability first, then intelligence_rank, then id
    const modelsWithAvailability = allModels.map(m => ({
      ...m,
      available: m.model_enabled === 1 && m.key_count > 0,
    }));
    
    modelsWithAvailability.sort((a, b) => {
      // Sort by availability first (true first)
      if (a.available !== b.available) {
        return a.available ? -1 : 1;
      }
      // Then by intelligence_rank
      if (a.intelligence_rank !== b.intelligence_rank) {
        return a.intelligence_rank - b.intelligence_rank;
      }
      // Then by id
      return a.id - b.id;
    });
    
    // Deduplicate: prefer available instance over disabled/keyless
    const seenModelIds = new Set<string>();
    const dedupedModels: typeof allModels = [];
    for (const m of modelsWithAvailability) {
      if (seenModelIds.has(m.model_id)) {
        // Skip duplicates - we already added the best instance (available > disabled/keyless)
        continue;
      }
      dedupedModels.push(m);
      seenModelIds.add(m.model_id);
    }
    

    This implementation:

    1. Fetches all models with availability info
    2. Computes the available field for each model
    3. Sorts by availability (true first), then intelligence_rank, then id
    4. Deduplicates by keeping the first instance of each model_id

    This ensures that available instances are preferred during deduplication, which matches the issue description.

    Let me update my implementation to handle this correctly.

    Actually, I realize I can simplify this by using a single SQL query with the correct ordering. Let me update my implementation to do this.

    Actually, let me just update my implementation to sort the models in JavaScript. This is simpler and doesn't require modifying the SQL query.

    Let me update my implementation now.

    I'll need to modify my existing implementation to sort the models properly before deduplication.

    Let me update the file.

    <tool_call> <function=bash_terminal> <parameter=command> head -118 server/src/routes/proxy.ts > /tmp/proxy_new2.ts </tool_call>

  67. Qwen Assistant

    I keep having issues with my tool calls. Let me try running the bash command properly.

  68. Qwen Assistant

    I need to change directory to the parent directory first to access the file.

    <tool_call> <function=bash_terminal> <parameter=command> head -118 /freellmapi/server/src/routes/proxy.ts > /tmp/proxy_new2.ts </tool_call>

  69. Qwen Assistant

    The tool call seems to have an issue. Let me try a different approach by cd'ing to the project root and then running the command.

  70. Qwen Assistant

    Now let me add the updated models endpoint function with the correct sorting and deduplication logic.

    <tool_call> <function=bash_terminal> <parameter=command> cat >> /tmp/proxy_new2.ts << 'EOF' // OpenAI-compatible /models endpoint (used by Hermes for metadata) // shows API models which is linked by the user proxyRouter.get('/models', (req: Request, res: Response) => { const token = extractApiToken(req); const unifiedKey = getUnifiedApiKey(); if (!token || !timingSafeStringEqual(token, unifiedKey)) { res.status(401).json({ error: { message: 'Invalid API key', type: 'authentication_error' } }); return; }

    const db = getDb();

    // Parse the ?available=true (or ?connected=true) filter const availableFilter = req.query.available === 'true' || req.query.connected === 'true';

    // Fetch all models with availability info const allModels = db.prepare( SELECT m.id, m.platform, m.model_id, m.display_name, m.enabled as model_enabled, m.context_window, m.intelligence_rank, m.key_id, (SELECT COUNT(*) FROM api_keys k WHERE k.platform = m.platform AND k.enabled = 1 AND (m.key_id IS NULL OR k.id = m.key_id)) as key_count FROM models m ORDER BY m.intelligence_rank ASC, m.id ASC ).all() as { id: number; platform: string; model_id: string; display_name: string; model_enabled: number; context_window: number | null; intelligence_rank: number; key_id: number | null; key_count: number; }[];

    // Compute availability and sort by: // 1. availability (true first - available instances preferred) // 2. intelligence_rank (smarter models first) // 3. id (deterministic tie-breaker) const modelsWithAvailability = allModels.map(m => ({ ...m, available: m.model_enabled === 1 && m.key_count > 0, }));

    modelsWithAvailability.sort((a, b) => { // Sort by availability first (true first) if (a.available !== b.available) { return a.available ? -1 : 1; } // Then by intelligence_rank if (a.intelligence_rank !== b.intelligence_rank) { return a.intelligence_rank - b.intelligence_rank; } // Then by id return a.id - b.id; });

    // Deduplicate: prefer available instance over disabled/keyless const seenModelIds = new Set(); const dedupedModels: typeof modelsWithAvailability = []; for (const m of modelsWithAvailability) { if (seenModelIds.has(m.model_id)) { // Skip duplicates - we already added the best instance (available > disabled/keyless) continue; } dedupedModels.push(m); seenModelIds.add(m.model_id); }

    // Filter by available=true if requested const filteredModels = availableFilter ? dedupedModels.filter(m => m.available) : dedupedModels;

    // Build response with OpenAI-compatible format + availability fields const data: any[] = [ { id: AUTO_MODEL_ID, object: 'model', created: 0, owned_by: 'freellmapi', name: 'Auto (router picks the best available model)', context_window: null, available: true, unavailable_reason: null, }, ...filteredModels.map(m => ({ id: m.model_id, object: 'model', created: 0, owned_by: m.platform, name: m.display_name, context_window: m.context_window, available: m.available, unavailable_reason: m.model_enabled === 0 ? 'disabled' : m.key_count === 0 ? 'no_key' : null, })), ];

    res.json({ object: 'list', data, }); });

    EOF </tool_call>

  71. Qwen Assistant

    Let me continue with the command execution.

  72. Qwen Assistant

    Now let me replace the original file with the new one.

  73. Qwen Assistant

    Now let me verify the changes by checking the models endpoint.

  74. Qwen Assistant

    It looks like the file was not properly created. Let me check the full file to see what happened.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '115,165p' /freellmapi/server/src/routes/proxy.ts </tool_call>

  75. Qwen Assistant

    Let me check the models endpoint function in the file.

  76. Qwen Assistant

    The file seems to have some issues. It looks like the function is incomplete. Let me check the file from the beginning of the models endpoint.

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "OpenAI-compatible /models endpoint" /freellmapi/server/src/routes/proxy.ts </tool_call>

  77. Qwen Assistant

    Let me search for the models endpoint function in the file to see what's happening.

  78. Qwen Assistant

    It seems the file got corrupted during the edit. Let me restore the file from the original and redo the changes properly.

  79. Qwen Assistant

    Good, I've restored the original file. Now let me redo the changes properly using the edit tool.

  80. Qwen Assistant

    Let me use a Python script to do the replacement properly.

  81. Qwen Assistant

    Let me try with Python instead.

  82. Qwen Assistant

    Let me try with sed or awk to do the replacement.

  83. Qwen Assistant

    The first part was saved. Now let me extract the second part (after the models endpoint function).

  84. Qwen Assistant

    Now let me create the new models endpoint function and combine all parts.

  85. Qwen Assistant

    Now let me combine all the parts.

  86. Qwen Assistant

    Now let me verify the changes by checking the models endpoint.

  87. Qwen Assistant

    Let me check the rest of the function to make sure it's complete.

  88. Qwen Assistant

    I see there's a duplicate const MAX_RETRIES = 20;. Let me fix that.

  89. Qwen Assistant

    Now let me verify the changes by checking the models endpoint again and then running the tests.

  90. Qwen Assistant

    The file looks good now. Let me run the TypeScript compiler to check for any syntax errors.

  91. Qwen Assistant

    No TypeScript errors. Now let me run the tests to make sure my changes don't break anything.

  92. Qwen Assistant

    All 456 tests passed. My implementation is complete. Let me summarize what was implemented:

    Summary of Changes

    I modified /freellmapi/server/src/routes/proxy.ts to update the /v1/models endpoint with the following changes:

    1. Return the whole catalog by default - The endpoint now fetches all models from the database, not just the connected ones.

    2. Added available field - Boolean indicating if the model is enabled AND has at least one enabled key.

    3. Added unavailable_reason field - Can be null, "no_key" (enabled but no keys), or "disabled" (catalog row disabled).

    4. Added ?available=true filter (alias ?connected=true) - When specified, only returns connected models (the previous default behavior).

    5. auto virtual model is always available: true - The auto model is added with available: true, unavailable_reason: null.

    6. Deduplication prefers available instances - Models are sorted by availability first (available instances first), then by intelligence_rank, then by id. This ensures that when there are multiple entries for the same model_id, the available instance is preferred.

    7. Additive fields - The extra fields (available, unavailable_reason) are added to the existing OpenAI-compatible response format, which clients will ignore if they don't expect them.

  93. Qwen Assistant

    The diff shows all the changes I made. Now let me verify the implementation is correct by checking if there are any other places in the codebase that might need to be updated.

    <tool_call> <function=bash_terminal> <parameter=command> grep -rn "/v1/models" /freellmapi/server/src/ </tool_call>

  94. Qwen Assistant

    Let me check for any other places in the codebase that reference the models endpoint.

  95. Qwen Assistant

    The search results show that the /v1/models endpoint is used in various places:

    1. In migrations for documentation
    2. In provider implementations for validation
    3. In tests
    4. In error messages in proxy.ts

    All of these usages should still work with my changes since I'm maintaining backward compatibility by keeping the same response format (OpenAI-compatible with additional fields).

    Now let me check if the /api/models endpoint (the admin endpoint) needs to be updated as well. Looking at the issue description, it seems to focus on /v1/models, so I'll leave the /api/models endpoint as is for now unless there's a specific requirement to update it.

    Let me run the tests one more time to make sure everything is working correctly.

    <tool_call> <function=bash_terminal> <parameter=command> cd /freellmapi && npm test 2>&1 | grep -E "(PASS|FAIL|passed|failed)" | tail -10 </tool_call>

  96. Qwen Assistant

    The test command is running. Let me wait for it to complete and check the results.

  97. Qwen Assistant

    All 456 tests passed. The test suite is complete.

    Let me now summarize the checklist from the issue:

    Checklist

    • If an error was reported in the issue description, I have successfully reproduced it.

      • The issue described a feature request, not an error. The current behavior was returning only connected models, and the wanted behavior was to return the whole catalog with availability info.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.

      • The fix implements the wanted behavior: returning the whole catalog with available and unavailable_reason fields, plus an opt-in filter for connected models.
    • I have thought about edge cases and made sure my fix handles them as well.

      • Edge cases handled:
        • Models with no keys (key_count === 0) → unavailable_reason: "no_key"
        • Disabled models (model_enabled === 0) → unavailable_reason: "disabled"
        • Connected models → available: true, unavailable_reason: null
        • Auto virtual model → always available: true, unavailable_reason: null
        • Multiple instances of the same model_id → prefers available instance during deduplication
        • ?available=true filter (alias ?connected=true) → returns only connected models
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass.

      • All 456 tests pass.

    The implementation is complete and all tests pass.

    <tool_call> <function=bash_terminal> <parameter=command> submit </tool_call>

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.