Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.5-35B-A3B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Generator: emit resolveBaseURL when URL fields contain placeholders…

  1. User

    ISSUE DESCRIPTION

    Generator: emit resolveBaseURL when URL fields contain placeholders

    When an API specification contains {PLACEHOLDER} tokens in URL-bearing fields, the generator must infer those placeholder names into EndpointTemplateVars before validation and generation so the generated client includes resolveBaseURL support.

    Inspect BaseURL, BasePath, GraphQLEndpointPath, tier base URLs, and resource, endpoint, and subresource base URLs. Preserve existing explicit entries and their order, append each newly discovered placeholder once, and use deterministic ordering when traversing maps. Generation from a templated base URL must produce a buildable client containing the URL resolver.

    Evaluation contract

    Generator.New must invoke placeholder inference before it returns, so callers can observe the inferred EndpointTemplateVars immediately and later validation/generation uses the same populated specification. Scan every documented URL-bearing field, preserve explicit variables and their order, append each inferred name once, and make map-backed traversal deterministic.

    Interface

    Type: Function Name: InferEndpointTemplateVarsFromBaseURLs Path: internal/spec/spec.go Input: (no parameters) Output: (no return value; mutates receiver's EndpointTemplateVars) Description: Scans the receiver's BaseURL, BasePath, GraphQLEndpointPath, tier BaseURLs, and resource/endpoint/subresource BaseURLs for {PLACEHOLDER} tokens and appends any newly discovered placeholders to EndpointTemplateVars, preserving existing explicit entries and their order. Call after loading or modifying any URL-bearing field but before validation or code generation.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /cli-printing-press, current file: none) bash-$

  2. Qwen Assistant

    Let me start by exploring the repository structure to understand what we're working with and find the relevant files mentioned in the issue.

  3. Qwen Assistant

    Let me find the spec.go file mentioned in the issue and explore the relevant code structure.

    <tool_call> <function=bash_terminal> <parameter=command> find /cli-printing-press -type f -name "spec.go" 2>/dev/null </tool_call>

  4. Qwen Assistant

    Let me search for the spec.go file mentioned in the issue.

  5. Qwen Assistant

    Now let me look at the content of the spec.go file to understand the structure.

    <tool_call> <function=bash_terminal> <parameter=command> cat /cli-printing-press/internal/spec/spec.go </tool_call>

  6. Qwen Assistant

    Let me use the bash_terminal function to read the file content.

  7. Qwen Assistant

    Now I need to see more of the file to understand its structure better. The output was truncated. Let me look at the full file in parts and search for the API spec fields mentioned in the issue (BaseURL, BasePath, GraphQLEndpointPath, tier base URLs, and resource/endpoint/subresource base URLs). Let me also look for any existing tests or usage of placeholder inference.

    Let me first get a count of lines and then search for relevant terms:

    <tool_call> <function=bash_terminal> <parameter=command> wc -l /cli-printing-press/internal/spec/spec.go && grep -n "BaseURL|BasePath|GraphQLEndpointPath|EndpointTemplateVars" /cli-printing-press/internal/spec/spec.go | head -50 </tool_call>

  8. Qwen Assistant

    Let me use the proper function syntax to run the bash command.

  9. Qwen Assistant

    Let me search for relevant patterns in the spec.go file to understand the structure better.

  10. Qwen Assistant

    Now let me look at the file to find existing placeholder-related patterns or functions:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "Placeholder|placeholder|{.*}|template" /cli-printing-press/internal/spec/spec.go | head -100 </tool_call>

  11. Qwen Assistant

    Let me use the bash_terminal function to search for placeholder-related code patterns in the spec.go file.

  12. Qwen Assistant

    Let me look for the regex pattern used to match placeholders:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "pathParamRe|re|regexp|Match|FindAll" /cli-printing-press/internal/spec/spec.go | head -80 </tool_call>

  13. Qwen Assistant

    I need to use the proper tool syntax to run bash commands. Let me search for regex patterns in the spec.go file.

  14. Qwen Assistant

    Now I understand the structure. I can see that:

    1. pathParamRe = regexp.MustCompile({([A-Za-z_][A-Za-z0-9_]*)}) is used to find placeholders
    2. The pathParamRe is used to extract placeholders from endpoint paths

    Now let me understand the existing structure better by looking at the APISpec struct and the Resource struct to see what URL-bearing fields exist:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '100,210p' /cli-printing-press/internal/spec/spec.go </tool_call>

  15. Qwen Assistant

    I need to look at the APISpec struct in the spec.go file. The sed command didn't work properly. Let me try a different approach - using grep to extract specific line ranges.

  16. Qwen Assistant

    Now let me look at the Resource struct and its nested fields:

  17. Qwen Assistant

    Now I have a clear understanding of the structure. Let me look for existing tests or any reference to the function that needs to be implemented. First, let me check if there's any existing implementation or test files:

    <tool_call> <function=bash_terminal> <parameter=command> grep -r "InferEndpointTemplateVarsFromBaseURLs|inferEndpointTemplateVarsFromBaseURLs" /cli-printing-press --include="*.go" 2>/dev/null </tool_call>

  18. Qwen Assistant

    Let me use the proper bash_terminal function to search for the function name.

  19. Qwen Assistant

    The function doesn't exist yet. Let me now look for any test files in the spec package:

  20. Qwen Assistant

    Let me check the test file for any existing tests related to EndpointTemplateVars:

  21. Qwen Assistant

    Now let me look at the generator package to understand how the spec is used and where the inference should happen:

    <tool_call> <function=bash_terminal> <parameter=command> find /cli-printing-press -type f -name ".go" -path "/generator/*" | head -20 </tool_call>

  22. Qwen Assistant

    I need to search for generator files to understand how the spec is used. Let me use bash_terminal function properly.

  23. Qwen Assistant

    Let me find the main generator file to understand how it uses the spec:

    <tool_call> <function=bash_terminal> <parameter=command> ls /cli-printing-press/internal/generator/*.go | grep -v test </tool_call>

  24. Qwen Assistant

    Let me list the non-test files in the generator directory to understand the structure.

  25. Qwen Assistant

    Let me look at the generator.go file to see how the generator uses the spec and how it calls New:

    <tool_call> <function=bash_terminal> <parameter=command> head -200 /cli-printing-press/internal/generator/generator.go </tool_call>

  26. Qwen Assistant

    I need to use the proper bash_terminal function to read files. Let me continue exploring the generator code.

  27. Qwen Assistant

    Now I see the New function in the generator. The issue mentions that Generator.New must invoke placeholder inference before it returns, so that callers can observe the inferred EndpointTemplateVars immediately.

    Let me now understand the full structure of what needs to be implemented:

    1. I need to create an InferEndpointTemplateVarsFromBaseURLs function in internal/spec/spec.go
    2. This function should scan all URL-bearing fields for {PLACEHOLDER} tokens
    3. It should append discovered placeholders to EndpointTemplateVars, preserving existing entries and their order
    4. The function should be called by Generator.New before it returns

    Let me first look at the complete spec.go file to understand where to place this function and see what other helper functions exist. Let me also look at how the pathParamRe is used:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '1950,2100p' /cli-printing-press/internal/spec/spec.go </tool_call>

  28. Qwen Assistant

    Let me continue examining the spec.go file to understand how path placeholders are extracted and used. I'll use the head/tail commands to view specific sections.

  29. Qwen Assistant

    Now I have a good understanding of the codebase. Let me now create the InferEndpointTemplateVarsFromBaseURLs function. Based on my analysis:

    1. I need to scan these URL-bearing fields:

      • BaseURL
      • BasePath
      • GraphQLEndpointPath
      • Tier base URLs (in TierRouting.Tiers and TierConfig.BaseURL)
      • Resource BaseURL
      • Endpoint BaseURL
      • SubResource BaseURL
    2. I need to use pathParamRe regex to find placeholders like {name}

    3. I need to preserve existing EndpointTemplateVars entries and their order

    4. I need to append each discovered placeholder name once (no duplicates)

    5. I need deterministic ordering when traversing maps (use sort package)

    Let me look at the end of the spec.go file to find a good place to add the function:

    <tool_call> <function=bash_terminal> <parameter=command> tail -100 /cli-printing-press/internal/spec/spec.go </tool_call>

  30. Qwen Assistant

    I need to use the proper tool syntax to get the end of the file.

  31. Qwen Assistant

    Now let me check what the imports are at the top of spec.go to ensure I have everything I need:

    <tool_call> <function=bash_terminal> <parameter=command> head -25 /cli-printing-press/internal/spec/spec.go </tool_call>

  32. Qwen Assistant

    I need to continue looking at the imports and existing patterns in spec.go to properly implement the function. Let me use the proper tool syntax.

  33. Qwen Assistant

    I can see the imports don't include sort. Let me now look at how to implement the InferEndpointTemplateVarsFromBaseURLs function. Let me first check if there's a test file that might help understand the expected behavior:

  34. Qwen Assistant

    Let me look for any tests that verify EndpointTemplateVars being set or inferred:

  35. Qwen Assistant

    The command exited with code 1 (meaning grep didn't find any matches). So there are no existing tests for EndpointTemplateVars in the test file. Let me now create the function I need to implement.

    Based on the issue description, I need to:

    1. Create a function InferEndpointTemplateVarsFromBaseURLs in internal/spec/spec.go
    2. Scan BaseURL, BasePath, GraphQLEndpointPath, tier base URLs, and resource/endpoint/subresource base URLs for {PLACEHOLDER} tokens
    3. Append newly discovered placeholder names to EndpointTemplateVars, preserving existing entries and their order
    4. Use deterministic ordering when traversing maps

    Let me now implement this function. First, let me add sort to the imports and then add the function:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '1,20p' /cli-printing-press/internal/spec/spec.go </tool_call>

  36. Qwen Assistant

    I need to use the proper bash_terminal tool syntax. Let me look at the imports section again.

  37. Qwen Assistant

    Now I need to add "sort" to the imports and then implement the function. Let me first check where pathParamRe is defined to understand the pattern:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "pathParamRe" /cli-printing-press/internal/spec/spec.go </tool_call>

  38. Qwen Assistant

    Let me use the proper bash_terminal function to search for pathParamRe.

  39. Qwen Assistant

    Now I understand the codebase structure. Let me implement the InferEndpointTemplateVarsFromBaseURLs function. First, I need to add sort to the imports and then implement the function.

  40. Qwen Assistant

    Now let me verify the imports were updated correctly:

    <tool_call> <function=bash_terminal> <parameter=command> head -20 /cli-printing-press/internal/spec/spec.go </tool_call>

  41. Qwen Assistant

    Let me use the bash_terminal tool to verify the imports were updated correctly.

  42. Qwen Assistant

    Now let me find the exact line number where I need to add the new function (at the end of the file):

  43. Qwen Assistant

    Now let me add the InferEndpointTemplateVarsFromBaseURLs function at the end of the file. Based on my analysis, I need to:

    1. Scan BaseURL, BasePath, GraphQLEndpointPath, tier base URLs, and resource/endpoint/subresource base URLs
    2. Extract placeholder names using pathParamRe
    3. Preserve existing EndpointTemplateVars and their order
    4. Append each discovered placeholder once (no duplicates)
    5. Use deterministic ordering when traversing maps
  44. Qwen Assistant

    Now let me verify that the code compiles:

  45. Qwen Assistant

    I need to set up the Go module cache. Let me check the Go environment:

  46. Qwen Assistant

    Let me set the required environment variables:

  47. Qwen Assistant

    I see the issue. In Go, I cannot take the address of a map index expression directly. Let me fix the code by adjusting how I handle the sub-resources:

  48. Qwen Assistant

    Let me fix the code. The issue is that I can't take the address of a map index expression. I need to fix how I handle the sub-resources:

  49. Qwen Assistant

    Let me check the current state of the file and then add the corrected function:

  50. Qwen Assistant

    It seems the sed command didn't work correctly. Let me delete the problematic portion and re-add the corrected code. First, let me view more of the file to understand where the issue is:

  51. Qwen Assistant

    Let me see the current state around line 3340-3400:

  52. Qwen Assistant

    The file has been corrupted by my previous sed command. Let me reset it to the original state using git and then try again.

    <tool_call> <function=bash_terminal> <parameter=command> git checkout /cli-printing-press/internal/spec/spec.go </tool_call>

  53. Qwen Assistant

    Let me reset the file to its original state and then properly add the function.

  54. Qwen Assistant

    Now let me verify the file is reset and then add the sort import correctly:

    <tool_call> <function=bash_terminal> <parameter=command> head -15 /cli-printing-press/internal/spec/spec.go </tool_call>

  55. Qwen Assistant

    Let me check if the file was properly reset and then add the import and function correctly.

  56. Qwen Assistant

    Good, the file has been reset. Now let me add the "sort" import and then the function. I'll use sed to add the import first:

    <tool_call> <function=bash_terminal> <parameter=command> sed -i 's/"slices"/"sort"\n\t"slices"/' /cli-printing-press/internal/spec/spec.go </tool_call>

  57. Qwen Assistant

    I need to use the bash_terminal function to execute the command.

  58. Qwen Assistant

    Let me verify the import was added correctly:

    <tool_call> <function=bash_terminal> <parameter=command> head -15 /cli-printing-press/internal/spec/spec.go </tool_call>

  59. Qwen Assistant

    Let me use the bash_terminal function to check the imports.

  60. Qwen Assistant

    Good, the sort import was added correctly. Now let me find the exact line number where I need to add the new function and then add it. First, let me see the end of the file:

    <tool_call> <function=bash_terminal> <parameter=command> wc -l /cli-printing-press/internal/spec/spec.go && tail -5 /cli-printing-press/internal/spec/spec.go </tool_call>

  61. Qwen Assistant

    Let me use the bash_terminal function to check the end of the file.

  62. Qwen Assistant

    Good. Now I need to add the function. Since I can't take the address of a map index expression in Go, I need to use a different approach. Let me write the function carefully, using intermediate variables to avoid the issue.

    Let me write the function to a file first and then append it:

    <tool_call> <function=bash_terminal> <parameter=command> cat > /tmp/new_function.go << 'FUNCEOF'

    // InferEndpointTemplateVarsFromBaseURLs scans all URL-bearing fields for // {PLACEHOLDER} tokens and appends any newly discovered placeholder names to // EndpointTemplateVars. Existing explicit entries are preserved in their order. // Each inferred placeholder is appended once. The function scans: // - BaseURL // - BasePath // - GraphQLEndpointPath // - Tier base URLs (TierRouting.Tiers values) // - Resource BaseURLs // - Endpoint BaseURLs // - Subresource BaseURLs // // Call this after loading or modifying any URL-bearing field but before // validation or code generation. func (s *APISpec) InferEndpointTemplateVarsFromBaseURLs() { if s == nil { return }

    // Track placeholders we've already seen to avoid duplicates.
    // Use a map for O(1) lookups.
    seen := make(map[string]bool, len(s.EndpointTemplateVars))
    for _, v := range s.EndpointTemplateVars {
    	if v != "" {
    		seen[v] = true
    	}
    }
    
    // Helper to extract and collect new placeholders from a URL-like string.
    extractPlaceholders := func(raw string) {
    	if raw == "" {
    		return
    	}
    	matches := pathParamRe.FindAllStringSubmatch(raw, -1)
    	for _, m := range matches {
    		name := m[1]
    		if !seen[name] {
    			seen[name] = true
    			s.EndpointTemplateVars = append(s.EndpointTemplateVars, name)
    		}
    	}
    }
    
    // Scan spec-level URL-bearing fields.
    extractPlaceholders(s.BaseURL)
    extractPlaceholders(s.BasePath)
    extractPlaceholders(s.GraphQLEndpointPath)
    
    // Scan tier base URLs in deterministic order.
    if s.TierRouting.DefaultTier != "" {
    	if tier, ok := s.TierRouting.Tiers[s.TierRouting.DefaultTier]; ok {
    		extractPlaceholders(tier.BaseURL)
    	}
    }
    // Get sorted tier names for deterministic traversal.
    tierNames := make([]string, 0, len(s.TierRouting.Tiers))
    for name := range s.TierRouting.Tiers {
    	tierNames = append(tierNames, name)
    }
    sort.Strings(tierNames)
    for _, name := range tierNames {
    	tier := s.TierRouting.Tiers[name]
    	extractPlaceholders(tier.BaseURL)
    }
    
    // Scan resources in deterministic order.
    resourceNames := make([]string, 0, len(s.Resources))
    for name := range s.Resources {
    	resourceNames = append(resourceNames, name)
    }
    sort.Strings(resourceNames)
    for _, resourceName := range resourceNames {
    	r := s.Resources[resourceName]
    
    	// Resource-level BaseURL.
    	if r.BaseURL != "" {
    		extractPlaceholders(r.BaseURL)
    	}
    
    	// Scan endpoints in deterministic order.
    	endpointNames := make([]string, 0, len(r.Endpoints))
    	for name := range r.Endpoints {
    		endpointNames = append(endpointNames, name)
    	}
    	sort.Strings(endpointNames)
    	for _, endpointName := range endpointNames {
    		e := r.Endpoints[endpointName]
    		if e.BaseURL != "" {
    			extractPlaceholders(e.BaseURL)
    		}
    		r.Endpoints[endpointName] = e
    	}
    
    	// Scan sub-resources recursively in deterministic order.
    	s.scanSubResourcesForPlaceholders(r.SubResources, extractPlaceholders)
    
    	s.Resources[resourceName] = r
    }
    

    }

    // scanSubResourcesForPlaceholders recursively scans resources and sub-resources // for placeholder names in BaseURL fields. func (s *APISpec) scanSubResourcesForPlaceholders(resources map[string]Resource, extractPlaceholders func(raw string)) { for _, r := range resources { // Sub-resource BaseURL. if r.BaseURL != "" { extractPlaceholders(r.BaseURL) }

    	// Sub-resource endpoints.
    	for _, e := range r.Endpoints {
    		if e.BaseURL != "" {
    			extractPlaceholders(e.BaseURL)
    		}
    	}
    
    	// Nested sub-resources - recurse.
    	if len(r.SubResources) > 0 {
    		s.scanSubResourcesForPlaceholders(r.SubResources, extractPlaceholders)
    	}
    }
    

    } FUNCEOF

  63. Qwen Assistant

    Let me use the bash_terminal function to append the new function to the spec.go file.

  64. Qwen Assistant

    The file creation must have failed. Let me try a different approach - using echo to append the function directly.

    <tool_call> <function=bash_terminal> <parameter=command> printf '%s\n' '' ' // InferEndpointTemplateVarsFromBaseURLs scans all URL-bearing fields for // {PLACEHOLDER} tokens and appends any newly discovered placeholder names to // EndpointTemplateVars. Existing explicit entries are preserved in their order. // Each inferred placeholder is appended once. The function scans: // - BaseURL // - BasePath // - GraphQLEndpointPath // - Tier base URLs (TierRouting.Tiers values) // - Resource BaseURLs // - Endpoint BaseURLs // - Subresource BaseURLs // // Call this after loading or modifying any URL-bearing field but before // validation or code generation. func (s *APISpec) InferEndpointTemplateVarsFromBaseURLs() { if s == nil { return }

    // Track placeholders we have already seen to avoid duplicates.
    seen := make(map[string]bool, len(s.EndpointTemplateVars))
    for _, v := range s.EndpointTemplateVars {
    	if v != "" {
    		seen[v] = true
    	}
    }
    
    // Helper to extract and collect new placeholders from a URL-like string.
    extractPlaceholders := func(raw string) {
    	if raw == "" {
    		return
    	}
    	matches := pathParamRe.FindAllStringSubmatch(raw, -1)
    	for _, m := range matches {
    		name := m[1]
    		if !seen[name] {
    			seen[name] = true
    			s.EndpointTemplateVars = append(s.EndpointTemplateVars, name)
    		}
    	}
    }
    
    // Scan spec-level URL-bearing fields.
    extractPlaceholders(s.BaseURL)
    extractPlaceholders(s.BasePath)
    extractPlaceholders(s.GraphQLEndpointPath)
    
    // Scan tier base URLs in deterministic order.
    if s.TierRouting.DefaultTier != "" {
    	if tier, ok := s.TierRouting.Tiers[s.TierRouting.DefaultTier]; ok {
    		extractPlaceholders(tier.BaseURL)
    	}
    }
    tierNames := make([]string, 0, len(s.TierRouting.Tiers))
    for name := range s.TierRouting.Tiers {
    	tierNames = append(tierNames, name)
    }
    sort.Strings(tierNames)
    for _, name := range tierNames {
    	tier := s.TierRouting.Tiers[name]
    	extractPlaceholders(tier.BaseURL)
    }
    
    // Scan resources in deterministic order.
    resourceNames := make([]string, 0, len(s.Resources))
    for name := range s.Resources {
    	resourceNames = append(resourceNames, name)
    }
    sort.Strings(resourceNames)
    for _, resourceName := range resourceNames {
    	r := s.Resources[resourceName]
    
    	if r.BaseURL != "" {
    		extractPlaceholders(r.BaseURL)
    	}
    
    	endpointNames := make([]string, 0, len(r.Endpoints))
    	for name := range r.Endpoints {
    		endpointNames = append(endpointNames, name)
    	}
    	sort.Strings(endpointNames)
    	for _, endpointName := range endpointNames {
    		e := r.Endpoints[endpointName]
    		if e.BaseURL != "" {
    			extractPlaceholders(e.BaseURL)
    		}
    		r.Endpoints[endpointName] = e
    	}
    
    	s.scanSubResourcesForPlaceholders(r.SubResources, extractPlaceholders)
    
    	s.Resources[resourceName] = r
    }
    

    }

    // scanSubResourcesForPlaceholders recursively scans resources and sub-resources // for placeholder names in BaseURL fields. func (s *APISpec) scanSubResourcesForPlaceholders(resources map[string]Resource, extractPlaceholders func(raw string)) { for _, r := range resources { if r.BaseURL != "" { extractPlaceholders(r.BaseURL) }

    	for _, e := range r.Endpoints {
    		if e.BaseURL != "" {
    			extractPlaceholders(e.BaseURL)
    		}
    	}
    
    	if len(r.SubResources) > 0 {
    		s.scanSubResourcesForPlaceholders(r.SubResources, extractPlaceholders)
    	}
    }
    

    }' >> /cli-printing-press/internal/spec/spec.go </tool_call>

  65. Qwen Assistant

    Let me verify if the function was added:

  66. Qwen Assistant

    The function was not added. It seems the printf command didn't work as expected. Let me try using the create/edit tool from the environment to add the function.

    First, let me check what special tools are available:

    <tool_call> <function=bash_terminal> <parameter=command> echo "Testing echo command" </tool_call>

  67. Qwen Assistant

    The echo command worked. Let me try using tee to append the function to the file.

  68. Qwen Assistant

    The function was successfully appended to the file. Now let me verify that the file compiles correctly:

    <tool_call> <function=bash_terminal> <parameter=command> export GOPATH=/root/go && export GOMODCACHE=$GOPATH/pkg/mod && export GOCACHE=/tmp/go-cache && export HOME=/root && cd /cli-printing-press && go build ./internal/spec </tool_call>

  69. Qwen Assistant

    The build command should have run. Let me check if the output was shown properly or if there was an error.

  70. Qwen Assistant

    The build succeeded! Now I need to update the generator to call this function in the New function. Let me look at the generator.go file to find where to add the call:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "func New" /cli-printing-press/internal/generator/generator.go </tool_call>

  71. Qwen Assistant

    Let me search for the New function in the generator.go file using the bash_terminal tool.

  72. Qwen Assistant

    Let me look at the New function to understand where to add the call:

  73. Qwen Assistant

    I can see the New function. I need to add a call to InferEndpointTemplateVarsFromBaseURLs before the function returns. Let me see where the function ends:

  74. Qwen Assistant

    Let me continue to see where the New function ends:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '280,330p' /cli-printing-press/internal/generator/generator.go </tool_call>

  75. Qwen Assistant

    Let me continue to find where the New function ends by viewing more lines.

  76. Qwen Assistant

    Let me continue to find where the New function ends to know exactly where to add the call.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '330,380p' /cli-printing-press/internal/generator/generator.go </tool_call>

  77. Qwen Assistant

    Let me continue viewing the generator.go file to find where the New function ends.

  78. Qwen Assistant

    Let me continue viewing the generator.go file to find where the New function ends.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '380,430p' /cli-printing-press/internal/generator/generator.go </tool_call>

  79. Qwen Assistant

    I need to continue viewing the generator.go file to find where the New function ends. Let me try to view more lines.

  80. Qwen Assistant

    Let me continue viewing the generator.go file to find where the New function ends.

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '430,480p' /cli-printing-press/internal/generator/generator.go </tool_call>

  81. Qwen Assistant

    I need to continue viewing the generator.go file to find where the New function ends. Let me try to use a different approach - search for the end of the function by looking for return g which is typical for Go functions that return the object they created.

  82. Qwen Assistant

    Let me look at line 565 to see the context where the New function returns:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '555,570p' /cli-printing-press/internal/generator/generator.go </tool_call>

  83. Qwen Assistant

    I need to use the bash_terminal function to view lines 555-570 of the generator.go file.

  84. Qwen Assistant

    Now I can see that the New function returns at line 565. I need to add a call to InferEndpointTemplateVarsFromBaseURLs before the return g statement. Let me add it at line 564 (just before the return).

  85. Qwen Assistant

    Let me verify the change was made correctly by viewing the lines around 565: <tool_call> <function=bash_terminal> <parameter=command> sed -n '560,575p' /cli-printing-press/internal/generator/generator.go </tool_call>

  86. Qwen Assistant

    I need to use the proper bash_terminal function to verify the change.

  87. Qwen Assistant

    The change was made correctly. Now let me build the generator package to verify everything compiles:

  88. Qwen Assistant

    The generator package compiles successfully. Now let me run the existing tests to make sure we haven't broken anything:

  89. Qwen Assistant

    Let me continue running the tests to see if all tests pass:

    <tool_call> <function=bash_terminal> <parameter=command> export GOPATH=/root/go && export GOMODCACHE=$GOPATH/pkg/mod && export GOCACHE=/tmp/go-cache && export HOME=/root && cd /cli-printing-press && go test ./internal/spec/... 2>&1 | tail -20 </tool_call>

  90. Qwen Assistant

    Let me run all tests to see the final results:

  91. Qwen Assistant

    The test failure is not related to our changes - it's a Go vulnerability scan issue. Let me run the spec tests to ensure our changes work correctly:

    <tool_call> <function=bash_terminal> <parameter=command> export GOPATH=/root/go && export GOMODCACHE=$GOPATH/pkg/mod && export GOCACHE=/tmp/go-cache && export HOME=/root && cd /cli-printing-press && go test ./internal/spec/... -count=1 2>&1 | tail -20 </tool_call>

  92. Qwen Assistant

    I need to run the spec tests to verify our changes work correctly. The bash_terminal function is not showing the output properly. Let me try running the command and getting the output.

  93. Qwen Assistant

    The spec tests pass. Now let me create a simple test script to verify that the function works correctly with some edge cases:

  94. Qwen Assistant

    Now let me run the test script to verify the function works correctly:

  95. Qwen Assistant

    I need to run the test from within the module. Let me create a test file in the internal/spec directory:

  96. Qwen Assistant

    Now let me run the new test to verify the function works correctly:

  97. Qwen Assistant

    Excellent! All 12 test cases pass! Now let me also run all the spec tests to make sure our changes don't break anything:

    <tool_call> <function=bash_terminal> <parameter=command> export GOPATH=/root/go && export GOMODCACHE=$GOPATH/pkg/mod && export GOCACHE=/tmp/go-cache && export HOME=/root && cd /cli-printing-press && go test ./internal/spec/... -v 2>&1 | tail -30 </tool_call>

  98. Qwen Assistant

    The bash command seems to be getting cut off. Let me try running the tests again and getting the full output.

  99. Qwen Assistant

    All spec tests pass. Now let me also verify that the changes work in a broader context by running the generator tests (excluding the one that has the vulnerability issue):

  100. Qwen Assistant

    There's no test named TestNew, which is fine. Let me check if the function is being called properly. First, let me verify the final state of the spec.go file to ensure everything looks good:

  101. Qwen Assistant

    The function is properly added. Now let me verify that the generator is calling this function correctly:

  102. Qwen Assistant

    Let me clean up by removing the test file I created (since the issue says not to modify existing tests, and I should check if there are any test cases for the new function that need to be satisfied):

  103. Qwen Assistant

    Now let me verify the existing tests still pass and check the git status:

  104. Qwen Assistant

    The tests pass. Let me check the git diff to see what changes we made:

  105. Qwen Assistant

    The changes look correct. Let me verify one more time that the build and tests pass:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.