Skip to content
TheChatArchiveThe Chat Archive
QwenQwen/Qwen3.5-35B-A3B· alibabaHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION orm.migrator.up() rewrites snapshot incorrectly Describe the bug When…

  1. User

    ISSUE DESCRIPTION

    orm.migrator.up() rewrites snapshot incorrectly

    Describe the bug

    When we run orm.migrator.up(), the snapshot changes and a bunch of stuff in the snapshot is wrong and we have to revert the changes.

    Reproduction

    https://github.com/zachkirsch/mikro-orm-migrate-snapshot-repro

    What driver are you using?

    @mikro-orm/sqlite

    MikroORM version

    7.1.2-dev.10

    Node.js version

    v24.0.1

    Operating system

    macOS

    Validations

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /mikro-orm, current file: none) bash-$

  2. Qwen Assistant

    The user is reporting a bug where orm.migrator.up() rewrites the snapshot incorrectly. Let me first explore the repository structure to understand what we're dealing with.

    This appears to be the MikroORM repository itself. Let me start by exploring the structure and understanding what the issue is about.

  3. Qwen Assistant

    This is the MikroORM repository itself. The issue mentions that orm.migrator.up() rewrites the snapshot incorrectly. Let me explore the packages directory to understand the structure and find the migrator-related code.

    <tool_call> <function=bash_terminal> <parameter=command> ls -la packages/ </tool_call>

  4. Qwen Assistant

    Let me explore the packages directory to understand the structure of the repository.

  5. Qwen Assistant

    Let me look at the migrations package since the issue is related to orm.migrator.up(). The issue mentions SQLite driver, so let me also check that package.

    <tool_call> <function=bash_terminal> <parameter=command> ls -la packages/migrations/ </tool_call>

  6. Qwen Assistant

    The previous command to list the migrations package wasn't invoked. Let me try again to explore the migrations package.

  7. Qwen Assistant

    Let me explore the migrations package source code.

    <tool_call> <function=bash_terminal> <parameter=command> ls -la packages/migrations/src/ </tool_call>

  8. Qwen Assistant

    I need to understand why my commands aren't being executed. Looking at the error message format, it seems like I'm getting the response but the command isn't being run. Let me try again with the proper command format.

  9. Qwen Assistant

    Now let me look at the Migrator.ts file since it contains the up() method:

  10. Qwen Assistant

    Now let me look at the referenced reproduction repository to understand what the issue is about. The issue says that when orm.migrator.up() is run, the snapshot changes incorrectly.

    Let me search for any existing issues or tests related to this:

    <tool_call> <function=bash_terminal> <parameter=command> grep -r "snapshot" packages/migrations/src/ --include="*.ts" </tool_call>

  11. Qwen Assistant

    Let me search for snapshot-related code in the migrations package to understand how the snapshot works.

  12. Qwen Assistant

    Let me look at the DatabaseSchema class to understand how it's serialized:

  13. Qwen Assistant

    Let me examine the DatabaseSchema.ts file to understand how schema is serialized.

  14. Qwen Assistant

    Now let me look at the DatabaseTable class to understand how tables are serialized:

    <tool_call> <function=bash_terminal> <parameter=command> cat packages/sql/src/schema/DatabaseTable.ts </tool_call>

  15. Qwen Assistant

    The previous command wasn't executed properly. Let me try again to view the DatabaseTable.ts file to understand the serialization.

  16. Qwen Assistant

    Let me look at the test files to understand what's expected and find the issue better:

  17. Qwen Assistant

    Let me look at the migration tests specifically to understand how the snapshot is expected to work:

    <tool_call> <function=bash_terminal> <parameter=command> ls tests/features/migrations/ </tool_call>

  18. Qwen Assistant

    Let me try again to list the migration tests directory to find the relevant test files.

  19. Qwen Assistant

    Let me look at the MigrationRuntimeSchema tests to understand how the snapshot is expected to work:

  20. Qwen Assistant

    This test file is about runtime schema but it doesn't test the snapshot issue. Let me look at the main migrator test file:

    <tool_call> <function=bash_terminal> <parameter=command> cat tests/features/migrations/Migrator.test.ts </tool_call>

  21. Qwen Assistant

    I need to try a different approach to read the file. Let me use the read command with proper formatting.

  22. Qwen Assistant

    Now let me look at the MigrationRunner and MigrationStorage to understand how migrations work:

    <tool_call> <function=bash_terminal> <parameter=command> cat packages/migrations/src/MigrationRunner.ts </tool_call>

  23. Qwen Assistant

    I keep getting errors when trying to execute commands. Let me check if the commands are actually being executed by looking at the response format. It seems the commands are being executed but I'm getting the response. Let me continue reading the code.

  24. Qwen Assistant

    Now I see the MigrationRunner code. Looking back at the issue description, the problem is that when orm.migrator.up() runs, it rewrites the snapshot incorrectly. The issue is in the runMigrations method in Migrator.ts.

    Let me look at the key part of the code in Migrator.ts where the snapshot is stored after migrations are run:

    protected override async runMigrations(
      method: 'up' | 'down',
      options?: string | string[] | MigrateOptions,
    ): Promise<MigrationInfo[]> {
      const result = await super.runMigrations(method, options);
    
      if (result.length > 0 && this.options.snapshot) {
        const ctx = Utils.isObject<MigrateOptions>(options) ? options.transaction : undefined;
        const schema = await DatabaseSchema.create(
          this.em.getConnection(),
          this.em.getPlatform(),
          this.config,
          undefined,
          undefined,
          undefined,
          undefined,
          undefined,
          ctx,
        );
    
        try {
          await this.storeCurrentSchema(schema);
        } catch {
          // Silently ignore for read-only filesystems (production).
        }
      }
    
      return result;
    }
    

    The issue is that after running migrations (up()), the snapshot is stored by reading the current database schema with DatabaseSchema.create(). This means the snapshot is updated to reflect the actual database state after the migration is applied.

    But looking at the code more carefully, the problem might be in how the snapshot is created/serialized. Let me check the getSchemaDiff method and how the snapshot is being stored.

    Let me search for the reproduction repository to understand what the issue is more clearly:

    <tool_call> <function=bash_terminal> <parameter=command> git log --oneline -20 </tool_call>

  25. Qwen Assistant

    I need to understand what the issue is about. The user mentioned that orm.migrator.up() rewrites the snapshot incorrectly. Let me explore the repository to understand the problem better.

  26. Qwen Assistant

    I can see from the git log that there's already a fix for snapshot serialization. Let me check the current state of the code and understand what the issue is. Let me first look at the recent changes related to snapshot:

  27. Qwen Assistant

    Now I understand the context better. There's already a recent fix for MySQL snapshot serialization. Let me look at the current state of the code to see if there's still an issue. Let me also check the GitHub issue #7796 that was referenced:

    <tool_call> <function=bash_terminal> <parameter=command> cat tests/issues/GH7796.test.ts </tool_call>

  28. Qwen Assistant

    Let me try to view the test file to understand what was fixed in GH7796.

  29. Qwen Assistant

    This is the test that validates the fix. The issue is about the snapshot flip-flopping between migration:create and migration:up. The test creates a snapshot from entity metadata, then runs up() which rewrites the snapshot from MySQL introspection, and then expects both snapshots to be equal.

    Now I understand the issue better. Let me check if the issue mentioned in the bug report is still present. The issue description says that orm.migrator.up() rewrites the snapshot incorrectly. Let me look at the current HEAD commit to see if there's still a problem.

    Looking at the git log, the latest commit (HEAD) is 184cfde5c which fixes MySQL snapshot serialization for decimal/text/extra/comment. This seems to be the fix for issue #7796.

    However, the issue description mentions version 7.1.2-dev.10 and the commit history shows version 7.1.1 (commit 249d302c7). This suggests that the issue might have been introduced after 7.1.1 and fixed in a later commit.

    Let me check the current status and see if there are any remaining issues with the snapshot serialization:

    <tool_call> <function=bash_terminal> <parameter=command> git diff HEAD~1..HEAD packages/sql/src/schema/DatabaseTable.ts | head -100 </tool_call>

  30. Qwen Assistant

    Let me check the recent changes to see what the current state of the code is. I'll look at the DatabaseTable.ts file more closely to see if there are any issues with the snapshot serialization.

  31. Qwen Assistant

    This shows the recent fix for MySQL snapshot serialization. The fix addresses the issues with length, default (decimal), extra (casing), and comment (empty string vs null).

    Now let me understand the current issue better. The user is reporting that orm.migrator.up() rewrites the snapshot incorrectly. Let me check if there are any other issues with the snapshot serialization that haven't been fixed yet.

    Let me look at the Platform.ts file to see how normalizeColumnType and formatDecimal are implemented:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "normalizeColumnType|formatDecimal" packages/core/src/platforms/Platform.ts | head -30 </tool_call>

  32. Qwen Assistant

    Let me look at the Platform.ts file to see the normalizeColumnType and formatDecimal methods:

  33. Qwen Assistant

    Let me see the normalizeColumnType method and the formatDecimal method:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '383,420p' packages/core/src/platforms/Platform.ts </tool_call>

  34. Qwen Assistant

    I'm getting errors when trying to execute commands. Let me try a different approach and use the special commands available in the environment.

    Let me first check what the current state of the codebase is and understand the issue better.

  35. Qwen Assistant

    Now let me look at the formatDecimal method:

  36. Qwen Assistant

    Now let me look at the formatDecimal method implementation:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '353,380p' packages/core/src/platforms/Platform.ts </tool_call>

  37. Qwen Assistant

    I keep having issues with the sed command. Let me try a different approach - maybe I can use a Python script or read the file differently.

  38. Qwen Assistant

    Let me try with python:

  39. Qwen Assistant

    Let me try using the open command to view the file:

    <tool_call> <function=bash_terminal> <parameter=command> head -400 packages/core/src/platforms/Platform.ts | tail -50 </tool_call>

  40. Qwen Assistant

    I keep getting an error when trying to execute commands. Looking at the output format, it seems like the commands are being executed but I'm not seeing proper responses. Let me try to understand the issue better by looking at what I already know.

    Based on what I've seen so far:

    1. The git log shows that commit 184cfde5c was the HEAD, which fixes MySQL snapshot serialization for decimal/text/extra/comment
    2. The test GH7796.test.ts validates that the snapshot from entity metadata matches the snapshot from introspection

    Let me try to run the existing tests to see if they pass:

  41. Qwen Assistant

    The commands are working. Let me look at the issue more carefully. I'll examine the storeCurrentSchema method in the Migrator to understand the potential problem:

  42. Qwen Assistant

    The issue is becoming clearer. Looking at the storeCurrentSchema method, I see that it writes the schema using JSON.stringify(schema, null, 2). But the key issue is that when up() runs, it creates a DatabaseSchema from the actual database introspection, and this may have different serialization than the metadata-based schema.

    Let me look at the getTargetSchema method from the SchemaGenerator:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "getTargetSchema" packages/sql/src/schema/SchemaGenerator.ts </tool_call>

  43. Qwen Assistant

    The previous command didn't get executed properly. Let me try a different approach to find the getTargetSchema method.

  44. Qwen Assistant

    The file doesn't exist at that path. Let me find the SchemaGenerator file.

  45. Qwen Assistant

    Let me look at the getTargetSchema method:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '82,106p' packages/sql/src/schema/SqlSchemaGenerator.ts </tool_call>

  46. Qwen Assistant

    The sed command is not working properly. Let me try a different approach to view the file content.

  47. Qwen Assistant

    Now I understand the flow better. The getTargetSchema method creates a schema from metadata using DatabaseSchema.fromMetadata. This is the metadata-based schema that's used when running create().

    When running up(), the runMigrations method creates a DatabaseSchema from the actual database introspection using DatabaseSchema.create().

    The issue is that these two different paths may produce different snapshots due to:

    1. Different field handling (like length for text/enum)
    2. Different default value handling (decimal defaults)
    3. Different casing for extra field
    4. Different handling of empty comments

    The recent commit 184cfde5c fixed some of these issues in DatabaseTable.toJSON(), but there may be other issues remaining.

    Let me check if there's an issue with how the name field is serialized in DatabaseSchema.toJSON():

    Looking at the DatabaseSchema.toJSON() method:

    return {
      name: this.name,
      namespaces: [...this.#namespaces].sort(),
      tables: [...this.#tables].sort(byTable),
      views: [...this.#views].sort(byTable),
      nativeEnums: Object.fromEntries(Object.entries(this.#nativeEnums).sort(([a], [b]) => byString(a, b))),
    };
    

    The name field comes from this.name, which is passed to the constructor. Let me check if there's any inconsistency in how the schema name is determined.

    Actually, looking more carefully at the issue, I see that the DatabaseSchema.toJSON() method doesn't serialize routines. This might be an issue if routines are added to the schema.

    Let me also check if there are any issues with the DatabaseTable.toJSON() method related to the partitioning field:

    Looking at the DatabaseTable.toJSON() method, I see that partitioning is not serialized at all. Let me check if this is correct:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "partitioning" packages/sql/src/schema/DatabaseTable.ts | head -20 </tool_call>

  48. Qwen Assistant

    Let me check what fields are serialized in the DatabaseTable.toJSON method:

  49. Qwen Assistant

    Let me continue viewing the toJSON method to see all the fields being serialized:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "toJSON" packages/sql/src/schema/DatabaseTable.ts </tool_call>

  50. Qwen Assistant

    Let me continue viewing the toJSON method to see all the fields being serialized:

  51. Qwen Assistant

    Now I can see the complete toJSON() method. I notice that partitioning is not being serialized, which could be an issue. Let me check if partitioning is used:

  52. Qwen Assistant

    I found an issue! The partitioning field is defined in the DatabaseTable class (line 38), and it has getter and setter methods (lines 80-85), but it's NOT being serialized in the toJSON() method. This means when up() rewrites the snapshot, the partitioning information is lost.

    Let me also check if there's a similar issue in DatabaseSchema for routines:

  53. Qwen Assistant

    I see that routines are also stored in DatabaseSchema but let me check if they're serialized in toJSON():

  54. Qwen Assistant

    Let me check if routines are being serialized in the DatabaseSchema.toJSON() method. I see that routines is not being serialized at all. This is a bug because when up() rewrites the snapshot, the routines information is lost.

    Now I've identified two issues:

    1. DatabaseTable.toJSON() doesn't serialize partitioning
    2. DatabaseSchema.toJSON() doesn't serialize routines

    Let me verify these findings and create the fix. Let me verify my understanding of the issue. I'll look at the recent changes to understand what the expected behavior should be.

    <tool_call> <function=bash_terminal> <parameter=command> git log --oneline -5 --all </tool_call>

  55. Qwen Assistant

    The command didn't execute properly. Let me try again.

  56. Qwen Assistant

    The latest commit 184cfde5c fixed MySQL snapshot serialization issues, but there's still the issue with partitioning and routines not being serialized.

    Now, let me verify if the partitioning and routines fields should actually be serialized in the snapshot. Let me check how the snapshot is read back:

    <tool_call> <function=bash_terminal> <parameter=command> grep -A 50 "getSchemaFromSnapshot" packages/migrations/src/Migrator.ts | head -60 </tool_call>

  57. Qwen Assistant

    Looking at the getSchemaFromSnapshot method, I can see that when the snapshot is read back:

    1. Tables are deserialized with their columns, indexes, checks, foreignKeys
    2. Views are deserialized
    3. Native enums are deserialized
    4. But partitioning is NOT being restored on tables
    5. routines is NOT being restored on the schema

    This confirms that there's a bug - the partitioning field on DatabaseTable is not being serialized or deserialized, and the routines field on DatabaseSchema is also not being serialized or deserialized.

    Let me first look at the complete deserialization code to understand the full picture:

  58. Qwen Assistant

    Let me look at the getSchemaFromSnapshot method to see how tables are deserialized:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '280,350p' packages/migrations/src/Migrator.ts </tool_call>

  59. Qwen Assistant

    The sed command is not working properly. Let me try a different approach to view the deserialization code.

  60. Qwen Assistant

    Now I can clearly see the issue! In the getSchemaFromSnapshot method:

    1. Tables are deserialized but table.partitioning is NOT being restored (only comment is restored)
    2. routines are NOT being restored from rest.routines

    And in the toJSON() methods:

    1. DatabaseTable.toJSON() doesn't serialize partitioning
    2. DatabaseSchema.toJSON() doesn't serialize routines

    This is the bug. When up() rewrites the snapshot:

    1. The schema is read from the database (which includes partitioning and routines if present)
    2. The schema is serialized using toJSON() (which doesn't include partitioning/routines)
    3. The snapshot is saved (losing partitioning/routines info)
    4. Next time, when up() runs, the snapshot is read back (without partitioning/routines)
    5. The schema from snapshot doesn't match the actual database schema
    6. This causes incorrect migrations to be generated

    Now let me fix this issue by:

    1. Adding partitioning to DatabaseTable.toJSON() serialization
    2. Adding routines to DatabaseSchema.toJSON() serialization
    3. Adding partitioning restoration in getSchemaFromSnapshot()
    4. Adding routines restoration in getSchemaFromSnapshot()

    Let me start by fixing the DatabaseTable.toJSON() method:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '1310,1470p' packages/sql/src/schema/DatabaseTable.ts </tool_call>

  61. Qwen Assistant

    Let me find the exact line number for the return statement in DatabaseTable.toJSON():

  62. Qwen Assistant

    Let me view the return statement in the toJSON method:

  63. Qwen Assistant

    Now I need to add the partitioning field to the return statement. But first, I need to serialize the partitioning field. Let me check the TablePartitioning type:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "TablePartitioning" packages/sql/src/typings.ts </tool_call>

  64. Qwen Assistant

    Let me find the TablePartitioning type definition:

  65. Qwen Assistant

    Good, now I understand the TablePartitioning type. It has definition and partitions fields. Let me also check the TablePartition type:

  66. Qwen Assistant

    Now I need to:

    1. Add partitioning serialization to DatabaseTable.toJSON()
    2. Add routines serialization to DatabaseSchema.toJSON()
    3. Add partitioning restoration in getSchemaFromSnapshot()
    4. Add routines restoration in getSchemaFromSnapshot()

    Let me start by modifying the DatabaseTable.toJSON() method to include partitioning:

  67. Qwen Assistant

    Now I need to fix the DatabaseTable.toJSON() method to include partitioning. Let me use the edit command:

  68. Qwen Assistant

    Let me use the edit command to fix the DatabaseTable.toJSON() method:

  69. Qwen Assistant

    Now I'll fix the DatabaseTable.toJSON() method to include partitioning. I need to add it to the return statement:

  70. Qwen Assistant

    Let me verify the change:

  71. Qwen Assistant

    The partitioning field has been added to the DatabaseTable.toJSON() method. Now I need to add routines to the DatabaseSchema.toJSON() method. Let me find the return statement in DatabaseSchema.toJSON():

  72. Qwen Assistant

    Let me find the toJSON method in DatabaseSchema:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "toJSON" packages/sql/src/schema/DatabaseSchema.ts </tool_call>

  73. Qwen Assistant

    The grep command for toJSON returned an error. Let me try again with a simpler approach to find the toJSON method in DatabaseSchema.ts.

  74. Qwen Assistant

    Let me view the toJSON method in DatabaseSchema.ts:

  75. Qwen Assistant

    Now I need to add routines to the DatabaseSchema.toJSON() method. I'll use sed to add it:

  76. Qwen Assistant

    Let me verify the change:

  77. Qwen Assistant

    The sed command didn't work properly. Let me try a different approach - I'll use a Python script to make the change:

  78. Qwen Assistant

    Python is not available. Let me try using sed with a different approach:

  79. Qwen Assistant

    I'll use sed to insert a line before the closing of the return object in the toJSON method.

  80. Qwen Assistant

    Let me verify the change:

  81. Qwen Assistant

    The sed command didn't work. Let me try a different approach - using the edit command if it's available, or a different sed pattern:

  82. Qwen Assistant

    Let me try a different approach - using sed with a multiline pattern to replace the line.

  83. Qwen Assistant

    Let me verify the change:

  84. Qwen Assistant

    Now I need to update the getSchemaFromSnapshot() method in Migrator.ts to restore the partitioning and routines fields. Let me look at the current code:

  85. Qwen Assistant

    Now I need to add the code to restore partitioning for each table and routines for the schema. I'll use sed to add the code after the table loop (line 324) and before schema.setTables:

    I need to:

    1. Add table.partitioning = tbl.partitioning; after table.setForeignKeys(tbl.foreignKeys);
    2. Add if (rest.routines) { schema.#routines = rest.routines; } after if (rest.views)
  86. Qwen Assistant

    Now let me add the partitioning restoration after the foreignKeys block. I'll use sed to insert the line:

  87. Qwen Assistant

    Let me verify the change:

  88. Qwen Assistant

    The sed command added the lines multiple times. This is because the pattern matched multiple times. Let me revert this and try a more targeted approach:

  89. Qwen Assistant

    Let me try a more targeted approach. First, let me check the exact line numbers in the file:

  90. Qwen Assistant

    Now I'll use sed with a more specific pattern to add the partitioning code after the foreignKeys block (line 312-313).

  91. Qwen Assistant

    Let me verify the change:

  92. Qwen Assistant

    Now I need to add the routines restoration after the views block. Let me find the views block:

    <tool_call> <function=bash_terminal> <parameter=command> sed -n '325,340p' packages/migrations/src/Migrator.ts </tool_call>

  93. Qwen Assistant

    The previous command was not executed properly. Let me continue viewing the file to find the views block.

  94. Qwen Assistant

    Now I can see the views block at lines 335-337. I need to add the routines restoration after this block. Let me insert the code after line 337:

  95. Qwen Assistant

    Let me verify the change:

  96. Qwen Assistant

    The sed command didn't insert the code properly - it's inside the if (rest.views) block. Let me revert and fix this properly:

  97. Qwen Assistant

    Let me try a different approach - I'll find the exact line number for the closing brace of the if (rest.views) block and insert after it:

  98. Qwen Assistant

    I need to add the routines restoration after line 333. Let me do that:

  99. Qwen Assistant

    Let me verify the change:

  100. Qwen Assistant

    The routines restoration has been added. Now I need to add the partitioning restoration for tables. Let me find the foreignKeys block:

  101. Qwen Assistant

    Now I need to add the partitioning restoration after line 312:

  102. Qwen Assistant

    Let me verify the change: <tool_call> <function=bash_terminal> <parameter=command> sed -n '305,325p' packages/migrations/src/Migrator.ts </tool_call>

  103. Qwen Assistant

    The previous command didn't execute. Let me try again.

  104. Qwen Assistant

    The partitioning restoration has been added. Now I need to add the setRoutines method to the DatabaseSchema class. Let me check if it exists:

    <tool_call> <function=bash_terminal> <parameter=command> grep -n "setRoutines" packages/sql/src/schema/DatabaseSchema.ts </tool_call>

  105. Qwen Assistant

    The command didn't execute. Let me try again to check if the setRoutines method exists in DatabaseSchema.

  106. Qwen Assistant

    The setRoutines method doesn't exist in DatabaseSchema. I need to add it. Let me find where the other setter methods are defined:

  107. Qwen Assistant

    I need to add a setRoutines method to the DatabaseSchema class. Let me view the setNativeEnums method to understand the pattern:

  108. Qwen Assistant

    I need to add a setRoutines method to the DatabaseSchema class. Let me add it after the setNativeEnums method:

  109. Qwen Assistant

    Let me verify the change:

  110. Qwen Assistant

    The setRoutines method has been added. However, I need to also check if there's a getRoutines method in the class. Let me check:

  111. Qwen Assistant

    The getRoutines method already exists. Now let me verify that the changes are complete and run the tests to see if they pass.

    First, let me check if there are any syntax errors in the modified files:

  112. Qwen Assistant

    No TypeScript errors! Let me also check the migrations package:

  113. Qwen Assistant

    No TypeScript errors in the migrations package either. Now let me run the existing tests to make sure the changes don't break anything:

  114. Qwen Assistant

    The test requires MySQL to be running, which is not available in this environment. Let me try running a simpler test that doesn't require a database, or let me check if there are any unit tests for the serialization logic:

  115. Qwen Assistant

    There are no specific tests for the serialization logic. Let me try to build the project to make sure there are no compilation errors:

  116. Qwen Assistant

    The build command timed out. Let me try building just the sql package to verify the changes are correct:

    <tool_call> <function=bash_terminal> <parameter=command> cd /mikro-orm/packages/sql && npx tsc --noEmit 2>&1 | head -50 </tool_call>

  117. Qwen Assistant

    The command didn't execute properly. Let me try a different approach to verify the changes are correct by reviewing the modified files:

    1. packages/sql/src/schema/DatabaseTable.ts - Added partitioning to toJSON()
    2. packages/sql/src/schema/DatabaseSchema.ts - Added routines to toJSON() and added setRoutines() method
    3. packages/migrations/src/Migrator.ts - Added restoration of partitioning and routines in getSchemaFromSnapshot()

    Let me verify all the changes are in place and the syntax is correct by reviewing the modified sections:

  118. Qwen Assistant

    All the changes are in place. Now let me verify the complete changes by showing the git diff:

  119. Qwen Assistant

    Now let me show the complete diff to verify the changes are correct:

  120. Qwen Assistant

    The changes look correct. Let me verify that the changes compile properly by running the TypeScript compiler on the specific files:

  121. Qwen Assistant

    Let me try a different approach to verify the changes compile:

  122. Qwen Assistant

    The TypeScript compilation passes for the SQL package. Let me also check the migrations package:

  123. Qwen Assistant

    The TypeScript compilation passes for both packages.

    Now let me summarize the changes I made:

    1. packages/sql/src/schema/DatabaseTable.ts: Added partitioning: this.partitioning, to the toJSON() method to serialize the partitioning field.

    2. packages/sql/src/schema/DatabaseSchema.ts:

      • Added setRoutines(routines: SqlRoutineDef[]): void method to set routines on the schema.
      • Added routines: this.#routines, to the toJSON() method to serialize the routines field.
    3. packages/migrations/src/Migrator.ts:

      • Added code to restore partitioning when deserializing tables from the snapshot.
      • Added code to restore routines when deserializing the schema from the snapshot.

    These changes ensure that when orm.migrator.up() rewrites the snapshot, the partitioning and routines information is preserved, preventing the snapshot from being incomplete after running migrations.

    Let me submit these changes:

    <tool_call> <function=bash_terminal> <parameter=command> cd /mikro-orm && git status </tool_call>

  124. Qwen Assistant

    The command didn't execute properly. Let me try again to check the git status and then submit.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.