Skip to content
TheChatArchiveThe Chat Archive
xiaomi/mimo-v2.5-pro· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION A self-throwing global error component renders no last-resort UI If…

  1. User

    ISSUE DESCRIPTION

    A self-throwing global error component renders no last-resort UI

    If the global error component itself fails, return the built-in valid HTML fallback with the expected successful fallback status while preserving response headers and cookies. Local error boundaries and framework navigation/control-flow signals must retain their existing semantics, and the original boundary exception must not be exposed.

    Interface

    No new public interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /vinext, current file: none) bash-$

  2. Assistant

    I'll start by exploring the repository structure to understand the codebase and locate relevant files. Let's first get a high-level view.

  3. Assistant

    Hmm, no Rust files. Let me check what kind of repository this is.

  4. Assistant

    This looks like a Next.js-like framework (vinext). Let me explore the structure more to understand the codebase.

  5. Assistant

    Let me explore the structure more to understand the codebase and find the relevant files for the error handling issue.

  6. Assistant

    Let me understand the project structure better and find the error-related code.

  7. Assistant

    Let me explore the server directory which likely contains the error handling logic.

  8. Assistant

    Let me look at the relevant files related to error handling, especially the fallback renderer and global error module.

  9. Assistant

    Let me look at the key files to understand the issue better. The issue says "A self-throwing global error component renders no last-resort UI". This means when the global error component itself throws an error, we need a fallback.

    Let me examine the relevant error boundary rendering code.

  10. Assistant

    Now let me look at the boundary rendering logic more carefully. Let me also look at the app-page-boundary.ts to understand how the error boundaries are resolved.

  11. Assistant

    Let me look at the default global error module and the RSC error handler.

  12. Assistant

    Let me look at the RSC error handler and the SSR error handler to understand the error handling flow.

  13. Assistant

    Let me look at how the global error component is rendered in the boundary rendering code.

  14. Assistant

    Now let me look at the SSR stream handling to understand how the error boundary rendering works in the SSR pipeline.

  15. Assistant

    Let me look at how the error boundary rendering is invoked in the page dispatch/render flow to understand what happens when the global error component itself throws.

  16. Assistant

    Let me search for where the global error component is used and what happens when it throws.

  17. Assistant

    Let me look at how the error boundary rendering works when the global error component itself throws. Let me search for the renderAppPageBoundaryElementResponse function to understand how errors are caught.

  18. Assistant

    Let me look at the tests directory to understand the test patterns and find any tests related to error boundaries.

  19. Assistant

    Let me look at the test for app-page-boundary-render.test.ts to understand the expected behavior.

  20. Assistant

    Let me look at how the global error component is rendered in the boundary rendering code. I need to understand what happens when the global error component throws an error.

    Let me also look at how Next.js handles this scenario. Let me search for "self-throwing" or "last resort" in the codebase.

  21. Assistant

    Let me search more broadly for "last-resort" or "fallback" in the context of error handling. Next.js has a concept where if the global error component itself throws, it renders a minimal valid HTML. Let me look at how Next.js does it. Let me search for "renderToInitialFizzStream" or "getGlobalErrorFallback".

  22. Assistant

    Let me make a single call to search for relevant patterns.

  23. Assistant

    Let me look at the renderAppPageBoundaryElementResponse function more carefully and the renderAppPageErrorBoundary to understand what happens when the global error component throws during rendering.

  24. Assistant

    Now let me look at how the callers handle errors from renderAppPageErrorBoundary and renderAppPageHttpAccessFallback. Let me check the dispatch flow.

  25. Assistant

    Let me look at lines around 799-920 and 1001-1076 to understand how the error boundaries are called and how errors from them are handled.

  26. Assistant

    Let me look at app-page-render.ts which is the main render lifecycle and where errors during boundary rendering might be caught.

  27. Assistant

    Let me look at lines around 816-882 to understand how the error boundary response is called and what happens when it fails.

  28. Assistant

    Let me look at the shouldRerenderAppPageWithGlobalError function and the renderAppPageHtmlStreamWithRecovery function.

  29. Assistant

    Let me look at the shouldRerenderAppPageWithGlobalError function.

  30. Assistant

    Let me look at the shouldRerenderAppPageWithGlobalError function.

  31. Assistant

    Let me look at the renderAppPageHtmlStreamWithRecovery function which handles the error recovery.

  32. Assistant

    Let me examine the full renderAppPageHtmlStreamWithRecovery function:

  33. Assistant

    Let me now look at how the route wiring calls renderAppPageErrorBoundary to understand the full call chain.

  34. Assistant

    Let me search for where renderAppPageErrorBoundary is called from:

  35. Assistant

    Let me understand how the response flows. When a global error component throws during rendering, the renderAppPageErrorBoundary function will throw. Let me see where the call is made and whether there's any try/catch around it.

  36. Assistant

    Let me search more broadly for where renderErrorBoundaryPage is defined and called.

  37. Assistant

    Let me look at how renderErrorBoundaryPage is used in app-page-request.ts:

  38. Assistant

    Let me look at the specific areas in renderAppPageErrorBoundary where the global error component rendering could throw, and trace what happens to the renderAppPageBoundaryElementResponse.

  39. Assistant

    Let me look at the renderAppPageHtmlResponse function to understand how it produces the HTML response.

  40. Assistant

    Let me look at renderAppPageHtmlResponse:

  41. Assistant

    Let me look at the html.ts file for any fallback HTML utility:

  42. Assistant

    Let me look at renderAppPageBoundaryResponse again more carefully. The issue is that when the global error component itself throws, what happens?

    The renderToReadableStream is the RSC renderer. When the global error component throws during RSC rendering, the stream will have errors. But for HTML responses, the SSR handler converts RSC to HTML. If the global error component throws during SSR, that would also be problematic.

    Let me look at what happens when the RSC stream contains errors and how SSR handles it.

  43. Assistant

    Let me look at what renderAppPageBoundaryResponse does when the RSC stream has errors and how the HTML response handles errors. Let me also look at how the SSR handler processes RSC errors.

  44. Assistant

    Let me understand how the SSR handler processes errors in the RSC stream. Let me look at the SSR entry:

  45. Assistant

    Let me look at the SSR entry to understand how it handles errors:

  46. Assistant

    Let me continue reading the SSR entry to understand how it handles errors:technique

  47. Assistant

    Let me continue reading the SSR entry to understand how it handles errors:

  48. Assistant

    Let me continue reading the SSR entry:

  49. Assistant

    Let me continue to see the catch block in the SSR entry:

  50. Assistant

    Let me look at how renderAppPageBoundaryResponse works and how it handles errors in the RSC stream:

  51. Assistant

    Let me look at the renderAppPageBoundaryResponse function more carefully:

  52. Assistant

    Let me look at the default global error component:

  53. Assistant

    Let me look at the default global error component:

  54. Assistant

    Now let me look at how renderAppPageErrorBoundary handles the case where the global error module itself throws. Let me look at the full renderAppPageErrorBoundary flow more carefully:

  55. Assistant

    Let me look at what the callers of renderAppPageErrorBoundary do when it fails. Let me trace through the full chain to understand where a self-throwing global error component would cause issues.

  56. Assistant

    Now let me look at the app-rsc-handler.ts to understand how the fallback renderer is used:

  57. Assistant

    Let me search more broadly for where the fallback renderer is called:

  58. Assistant

    Let me look at the renderAppPageBoundaryResponse and renderAppPageHtmlResponse more carefully to understand where errors might occur when the global error component itself throws.

  59. Assistant

    Let me look at the fallback renderer's renderErrorBoundary method more carefully:

  60. Assistant

    Now I understand the issue. Let me look at the existing tests for global error to understand the expected behavior:

  61. Assistant

    Now let me understand the full picture. Let me look at the renderAppPageBoundaryElementResponse more carefully and see how the SSR handler works when the RSC stream has errors:

  62. Assistant

    Now let me check if mergeMiddlewareResponseHeaders is already imported in app-page-boundary-render.ts:

  63. Assistant

    Now let me understand what happens when the global error component itself throws during rendering. Let me look at how the renderAppPageHtmlStreamWithRecovery handles errors in the SSR pipeline:

  64. Assistant

    Now I have a clear understanding of the issue. When the global error component itself throws during rendering, there's no last-resort fallback UI. Let me now implement the fix. The approach is:

    1. In renderAppPageErrorBoundary, wrap the renderAppPageBoundaryElementResponse call with error handling
    2. When the error boundary is a global error component and rendering fails, return a built-in valid HTML fallback
    3. Preserve response headers (middleware headers) and cookies
    4. Return status 200 (the expected successful fallback status)
    5. Don't expose the original boundary exception
  65. Assistant

    Now I have a good understanding of the issue. Let me trace the full flow to understand the problem:

    1. When a page error occurs with no local error boundary, renderAppPageErrorBoundary is called with the global error module
    2. If the global error component itself throws during RSC/SSR rendering, renderAppPageBoundaryElementResponse throws
    3. This error propagates up with no fallback, resulting in no UI

    The fix: wrap the rendering in renderAppPageErrorBoundary in a try/catch when the resolved boundary is the global error. If rendering fails, return a built-in valid HTML fallback with status 200, preserving response headers and cookies.

    Let me first add the needed imports:

  66. Assistant

    Those imports are not currently in this file. Let me check where they come from.

  67. Assistant

    Let me check where mergeMiddlewareResponseHeaders comes from:

  68. Assistant

    Let me look at the existing HTTP error responses for inspiration on creating the fallback:

  69. Assistant

    Now I have a clear understanding of the issue. The problem is in renderAppPageErrorBoundary - when errorBoundary.isGlobalError is true and the rendering itself throws (because the global error component is broken), there's no fallback. The error propagates and no UI is rendered.

    The fix: wrap the rendering call in a try/catch when errorBoundary.isGlobalError is true, and if it throws, return a built-in valid HTML fallback with status 200, preserving middleware headers.

    Let me implement this:

  70. Assistant

    Now I understand the full picture. Let me trace the issue:

    1. When renderAppPageErrorBoundary is called and errorBoundary.isGlobalError is true (meaning the global error boundary is the last resort)
    2. The global error component is rendered
    3. If the global error component itself throws, renderAppPageBoundaryElementResponse will throw
    4. This error propagates up and no UI is rendered

    The fix: wrap the renderAppPageBoundaryElementResponse call in a try/catch when errorBoundary.isGlobalError is true. If it throws, return a built-in valid HTML fallback with status 200, preserving middleware headers.

    Let me now check if there are tests related to this scenario:

  71. Assistant

    Now I have a clear understanding of the issue. The problem is that when the global error component itself throws during rendering, renderAppPageBoundaryElementResponse fails and no fallback UI is produced. The fix is to wrap this in a try/catch when the error boundary is the global error, and return a built-in valid HTML fallback with status 200.

    Let me implement this:

  72. Assistant

    Now I have a clear understanding of the issue. The problem is that when the global error component itself throws during rendering, renderAppPageBoundaryElementResponse throws and there's no fallback. The fix is to:

    1. Wrap the renderAppPageBoundaryElementResponse call in a try/catch when the error boundary is the global error
    2. If it throws, return a built-in valid HTML fallback with status 200
    3. Preserve middleware response headers and cookies
    4. Not expose the original boundary exception
    5. Call clearRequestContext to prevent leaks

    Let me also check if there's similar handling needed for the renderHttpAccessFallback path:

  73. Assistant

    Now I see that the HTTP access fallback path also uses includeGlobalErrorBoundary: true (line 354). So the same issue could occur there if the global error component throws during rendering. Let me check the HTTP access fallback path:

    For renderAppPageHttpAccessFallback:

    • The boundary component (not-found, forbidden, unauthorized) is wrapped inside the global error boundary
    • If the global error component throws during rendering, the same issue occurs

    So I need to handle both cases:

    1. In renderAppPageErrorBoundary: when errorBoundary.isGlobalError is true and rendering fails
    2. In renderAppPageHttpAccessFallback: when the global error boundary wraps the boundary component and rendering fails

    Actually, looking more carefully at the code:

    For renderAppPageErrorBoundary:

    • When errorBoundary.isGlobalError is true, includeGlobalErrorBoundary is false (line 436)
    • The global error component is rendered directly as the error boundary component
    • If it throws, no fallback

    For renderAppPageHttpAccessFallback:

    • includeGlobalErrorBoundary is true (line 354)
    • The global error component wraps the not-found/forbidden/unauthorized component
    • If the global error component throws during rendering, no fallback

    Both cases need the fix.

    Now let me implement the fix. The approach:

    1. Create a helper function that returns a built-in valid HTML fallback response
    2. In renderAppPageErrorBoundary, wrap the renderAppPageBoundaryElementResponse call in a try/catch when errorBoundary.isGlobalError is true
    3. In renderAppPageHttpAccessFallback, wrap the renderAppPageBoundaryElementResponse call in a try/catch when the global error boundary is included
    4. In both catch blocks, return the fallback response, call clearRequestContext, and preserve middleware headers

    Let me implement this now.

  74. Assistant

    Let me now look at the middleware response headers module to understand the import:

  75. Assistant

    Now I have a complete understanding. Let me implement the fix. The issue is that when the global error component itself throws during rendering, there's no fallback. I need to:

    1. In renderAppPageErrorBoundary, wrap the renderAppPageBoundaryElementResponse call in a try/catch when errorBoundary.isGlobalError is true
    2. Similarly for renderAppPageHttpAccessFallback where global error wrapping is used
    3. On catch, return a built-in valid HTML fallback with status 200, preserving middleware headers

    Let me add the needed imports and the fallback logic:

  76. Assistant

    Let me use the edit command properly:

  77. Assistant

    Let me use the edit special command instead of trying to use sed.

  78. Assistant

    Good, the imports are added. Now let me check if VINEXT_RSC_CONTENT_TYPE is available:

  79. Assistant

    I need to also import VINEXT_RSC_CONTENT_TYPE for the fallback response. Let me update the import:

  80. Assistant

    Good. Now let me add the fallback response helper function and modify renderAppPageErrorBoundary. Let me first add the helper function:

  81. Assistant

    Now let me add the fallback helper function and modify renderAppPageErrorBoundary. The key is: when the global error component itself throws during rendering, catch the error and return a built-in valid HTML fallback with status 200, preserving middleware headers.

  82. Assistant

    Now let me add the fallback function and modify renderAppPageErrorBoundary to catch self-throwing global error components. I'll add a renderGlobalErrorResponse function that returns a built-in HTML fallback:

  83. Assistant

    Good, the fallback function is in place. Now I need to modify renderAppPageErrorBoundary to catch when the global error component itself throws during rendering:

  84. Assistant

    Now I need to also handle the same protection in renderAppPageHttpAccessFallback, since it also wraps content inside the global error boundary. Let me look at the relevant part:

  85. Assistant

    Now I need to also handle the same protection in renderAppPageHttpAccessFallback, since it also wraps content with includeGlobalErrorBoundary: true. If the global error component throws during rendering, we should return the same fallback.

  86. Assistant

    Wait, I need to reconsider the renderAppPageHttpAccessFallback catch. The issue says "Local error boundaries and framework navigation/control-flow signals must retain their existing semantics." The catch in HTTP access fallback is too broad - it catches ALL rendering failures. But the renderAppPageHttpAccessFallback already returns null if no boundary component exists, so the rendering should only fail if the global error component itself throws. Let me also fix the status code - for HTTP access fallbacks, the status should be the original status code, not always 200.

  87. Assistant

    It looks like there was a duplication. Let me check the current state and fix it:

  88. Assistant

    There's a duplicate. Let me remove the duplicate lines:

  89. Assistant

    Good, the duplicate is removed. Now let me update the HTTP access fallback catch to pass the original status code:

  90. Assistant

    Good. Now let me verify the complete file to make sure everything is correct:

  91. Assistant

    Let me also add a blank line between the two functions:

  92. Assistant

    Let me add a blank line between the two functions:

  93. Assistant

    The edit went wrong again. Let me fix the file properly:

  94. Assistant

    The file looks good now. Let me run the existing tests to make sure nothing is broken:

  95. Assistant

    Let me figure out how to run tests in this repo:

  96. Assistant

    Let me try running the tests using pnpm:

  97. Assistant

    Let me try running just the specific test file:

  98. Assistant

    Let me try a different approach to run the tests:

  99. Assistant

    Let me try to find the right way to run the tests:

  100. Assistant

    Let me try running the test with the vp command from node_modules/.bin:

  101. Assistant

    The failing tests are unrelated to my changes (they're in oxlint-prefer-shared-utils.test.ts). Let me run just the boundary render test to confirm:

  102. Assistant

    All 15 existing boundary render tests pass. Let me also run related test files:

  103. Assistant

    All tests pass. Let me also run the full unit test suite to make sure nothing is broken:

  104. Assistant

    The only failures are in oxlint-prefer-shared-utils.test.ts which is completely unrelated to my changes (it's an existing failure). All 220 other test files pass including all boundary render tests.

    Let me verify the full diff:

  105. Assistant

    I notice I imported VINEXT_RSC_CONTENT_TYPE and applyRscCompatibilityIdHeader but I'm not using them. Let me clean up the unused imports:

  106. Assistant

    I imported VINEXT_RSC_CONTENT_TYPE and applyRscCompatibilityIdHeader but I only use VINEXT_RSC_VARY_HEADER. Let me clean up:

  107. Assistant

    Let me verify the final diff to make sure everything looks clean:

  108. Assistant

    The diff looks clean. Let me run the boundary render tests one more time to confirm everything is still working:

  109. Assistant

    All 80 tests pass across 6 test files. Let me now do a final review of the changes and go through the checklist.

  110. Assistant

    Let me do a final review of the complete changes:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.