Skip to content
TheChatArchiveThe Chat Archive
xiaomi/mimo-v2.5-pro· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION LSP doesn't provide completion for interfaces Lisette version: 0.2.11…

  1. User

    ISSUE DESCRIPTION

    LSP doesn't provide completion for interfaces Lisette version: 0.2.11 IDE: VSCode and Zed

    The LSP isn't providing completions for interfaces from either stdlib or user-defined.

    interface Example {
      fn example(self, name: string) -> string
    }
    
    fn example_call(ex: Example) -> string {
      ex.
    }
    

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /lisette, current file: none) bash-$

  2. Assistant

    I'll start by exploring the repository structure to understand what we're working with. Let's first look at the directory.

  3. Assistant

    Let me explore the repository structure more to understand what kind of project this is.

  4. Assistant

    Let me explore the crates directory to find the LSP-related code.

  5. Assistant

    The LSP crate is at crates/lsp. Let me look at it more closely.

  6. Assistant

    Let me look at the LSP source files.

  7. Assistant

    The issue is about LSP not providing completions for interfaces. Let me look at the completion.rs file to understand how completions work.

  8. Assistant

    Now let me look at the type_name function used in the completion code:

  9. Assistant

    Let me search for type_name in the lsp crate

  10. Assistant

    Let me look at the type_name function in analysis.rs:

  11. Assistant

    Now let me look at how the LSP handles dot access completions. I need to see the lib.rs where completions are triggered:

  12. Assistant

    Let me look at the full completion method in lib.rs:

  13. Assistant

    Let me see the completion method:

  14. Assistant

    Let me understand how the type system handles interfaces. Let me look at the syntax types and how interfaces are defined:

  15. Assistant

    Let me look at the definition structure to understand how interfaces are stored:

  16. Assistant

    Now I understand the issue better. Let me look at how interface methods are stored and accessed. The Interface type has methods, but the get_instance_completions function only looks at Struct definitions and iterates definitions for methods. Let me check how interface methods are registered as definitions.

  17. Assistant

    Let me look at the Type definition to understand how interface types are represented:

  18. Assistant

    Let me look at the Type enum to see how interface types are represented.

  19. Assistant

    Let me look at how interface methods are stored in the definitions. Let me check the semantics store:

  20. Assistant

    Now I understand the issue. Let me look at how interface methods are stored vs struct methods.

  21. Assistant

    Now I need to understand how interface methods work. The issue is that when a variable has an interface type, the LSP should show the interface's methods as completions when the user types . after the variable.

    Let me look at get_instance_completions more carefully. It currently:

    1. Gets struct fields for struct types
    2. Finds methods defined as Type.method definitions

    The problem is that for interfaces, methods are stored differently - they're part of the interface definition itself, not as separate Type.method definitions.

    Let me look at the semantics to understand how interface methods are represented.

  22. Assistant

    Let me look at the interface_methods function more carefully.

  23. Assistant

    Let me look at the get_interface function and understand how interface methods are stored.

  24. Assistant

    Now I understand the core issue. Let me examine the flow more carefully. Let me look at how the detect_dot_context function handles the case when the expression has an interface type:

  25. Assistant

    Let me see the is_type_definition method:

  26. Assistant

    Now let me understand how interface methods are registered as definitions. Let me check the inference code for interfaces:

  27. Assistant

    Now let me look at how definitions are collected. Let me find where interface definitions are registered:

  28. Assistant

    Let me look at how interface definitions are registered, particularly the methods:

  29. Assistant

    Now I can see that interface methods ARE registered as Definition::Value entries with qualified names like module.Example.example. So the get_instance_completions should theoretically find them. Let me check is_instance_method more carefully and understand the type of the self parameter:

  30. Assistant

    Let me search for where interface methods are registered:

  31. Assistant

    Let me look at the populate_interface function more carefully:

  32. Assistant

    Now I understand the core problem. The interface methods are registered as Definition::Value entries with the self parameter stripped from the type. So when get_instance_completions calls is_instance_method on these methods, it fails because the first parameter is no longer the interface type.

    Let me verify this by also checking the AnalysisSnapshot to understand how definitions are accessed:

  33. Assistant

    Now I need to understand how definitions are stored. Let me look at SemanticResult:

  34. Assistant

    Now I have a clear picture. The issue is:

    1. Interface methods are stored as Definition::Value entries with the self parameter stripped from the type
    2. get_instance_completions checks is_instance_method(definition.ty(), type_id) which looks for the receiver type as the first parameter
    3. Since interface methods have self stripped, this check fails and no interface methods are returned

    Let me also check how the Interface.methods map is populated:

  35. Assistant

    Now I understand the full picture. The problem is:

    1. Interface methods are stored in Interface.methods HashMap with self stripped
    2. They're also registered as Definition::Value entries with self stripped
    3. is_instance_method checks if the first parameter matches the receiver type, but since self is stripped, this check fails

    I need to modify get_instance_completions to handle interface types. Let me also check Type::get_qualified_id:

  36. Assistant

    Let me look at how interface methods are stored compared to struct methods:

  37. Assistant

    Now I have a clear understanding of the problem. Let me trace through the flow:

    1. When typing ex. where ex: Example (interface), detect_dot_context gets the type and returns DotContext::Instance("module.Example")
    2. get_instance_completions("module.Example", ...) is called
    3. It iterates all definitions looking for module.Example.* methods
    4. It finds module.Example.example which is a Value definition
    5. BUT is_instance_method() fails because interface methods have self stripped from their type during registration

    The fix is: in get_instance_completions, we need to also handle Interface definitions by looking at their methods map directly.

    Let me first look at the existing tests:

  38. Assistant

    Let me check if there are any LSP-specific tests:

  39. Assistant

    Let me check if there are any existing tests for interface completions:

  40. Assistant

    Let me look at the relevant tests for interfaces and see if there's one for completions on interfaces:

  41. Assistant

    Now let me also look at how the Snapshot provides access to definitions from all modules:

  42. Assistant

    Let me look at how the definitions map works - what are the keys?

  43. Assistant

    Let me look at the Module struct to see how definitions are stored.

  44. Assistant

    Let me look at the Module struct.

  45. Assistant

    Let me find the Module definition.

  46. Assistant

    Now I have a full understanding of the issue. Let me trace through the completion code path:

    1. detect_dot_context correctly identifies the interface type and returns DotContext::Instance("module.Example")
    2. get_instance_completions is called
    3. For interface definitions, methods is stored in the Interface.methods HashMap
    4. Interface methods are ALSO registered as Definition::Value entries with qualified names like module.Example.example, but with self stripped from the type
    5. The is_instance_method check fails because the first parameter is no longer the interface type (it was stripped)

    The fix is to add handling for interfaces in get_instance_completions. Let me implement this:

  47. Assistant

    Now let me implement the fix. I need to modify get_instance_completions to handle interfaces. The key change is to also check for Interface definitions and include their methods:

  48. Assistant

    Now I understand the full picture. The issue is that interface methods are stored in the Interface.methods HashMap AND as Definition::Value entries, but both have self stripped from their type. When get_instance_completions iterates Definition::Value entries, the is_instance_method check fails because the first parameter is no longer the receiver type.

    The fix is to add handling for Interface definitions in get_instance_completions - directly reading methods from the Interface.methods HashMap.

  49. Assistant

    Now I understand the full issue. Let me implement the fix. I need to add handling for Interface definitions in get_instance_completions - directly reading methods from the Interface.methods HashMap and recursively collecting from parent interfaces:

  50. Assistant

    Now let me apply the fix to the actual file. Let me replace the get_instance_completions function:

  51. Assistant

    Good, the edit was applied. Now I need to add the necessary imports. Let me check if rustc_hash and ecow are available:

  52. Assistant

    Let me check the dependencies for the LSP crate:

  53. Assistant

    Now I need to check if ecow is available as a dependency. Let me check:

  54. Assistant

    The ecow crate is a workspace dependency but not directly in the LSP crate. Let me check how EcoString is accessed in other files:

  55. Assistant

    I need to check if ecow is accessible through the syntax crate:

  56. Assistant

    Good, EcoString is re-exported from syntax. Let me update the code to use syntax::EcoString:

  57. Assistant

    Now let me verify the code compiles. First, let me check that the definitions map key type matches what we're using. Let me check the Symbol type:

  58. Assistant

    Let me check if Symbol implements indexing with &str:

  59. Assistant

    Good, Symbol implements Borrow<str> so the snapshot.definitions().get(parent_id) call should work. Now let me build the project to verify it compiles:

  60. Assistant

    The code compiles. Now let me run the existing LSP tests to make sure we didn't break anything:

  61. Assistant

    No tests ran because the LSP crate has test = false in its Cargo.toml. The tests are in /lisette/tests/lsp.rs. Let me run those:

  62. Assistant

    All 469 tests pass. Now let me also look at the specific interface-related tests to see if any test completions:

  63. Assistant

    Good, no existing interface completion tests. Let me now also check if there's a related issue with the detect_dot_context function. When the type is an interface, the flow should work. Let me verify the full file is correct:

  64. Assistant

    The code looks good. Now let me also check the detect_dot_context function for the edge case where the expression before the dot is a type-level identifier (like Example.method). Currently is_type_definition() excludes Interface:

  65. Assistant

    Now let me also make sure the detect_dot_context function correctly handles the case when the expression before the dot has an interface type. Let me look at how expression.get_type() works for interface-typed variables:

  66. Assistant

    Let me check how expression.get_type() returns the type for an identifier:

  67. Assistant

    Now I need to also check if the detect_dot_context function correctly handles the case when the variable has an interface type. Let me verify the full flow works by running the tests:

  68. Assistant

    All 469 tests pass. Now let me also think about edge cases. Let me check if there's a potential issue with the detect_dot_context function when the expression before the dot has an interface type. The flow is:

    1. member is empty → continues past the !member.is_empty() check
    2. Checks if the identifier is a type → is_type_definition() returns false for interfaces, so this doesn't match
    3. Calls expression.get_type() → returns the interface's nominal type
    4. type_name(&ty) extracts the qualified name → returns DotContext::Instance("module.Example")

    This should work correctly. Let me now verify the complete fix by looking at the final file:

  69. Assistant

    Let me also run the full test suite to make sure nothing else breaks:

  70. Assistant

    All 469 tests pass. Let me also run any other tests that might be relevant:

  71. Assistant

    There are failures in the broader test suite. Let me check if these are pre-existing failures (not related to my changes):

  72. Assistant

    The LSP tests all pass. The failures in the broader test suite are in the tests package which seems to have snapshot/golden tests. Let me check if those failures are pre-existing by checking the diff and the tests themselves.

  73. Assistant

    Let me check if these failures are pre-existing or related to my changes:

  74. Assistant

    Let me verify these failures are pre-existing by checking if they exist before my change:

  75. Assistant

    The failures are pre-existing - they exist even without my changes. Let me restore my changes:

  76. Assistant

    Good - the failures are pre-existing snapshot test failures unrelated to my change. They exist without my changes. Let me verify the final diff:

  77. Assistant

    The fix looks good. But I need to also consider visibility - I should check that interface methods respect the same_module flag. Let me update the code to check the interface definition's visibility:

  78. Assistant

    I see there's a duplicate comment block. Let me fix that:

  79. Assistant

    Let me also check if the definition @ binding compiles properly with the match pattern:

  80. Assistant

    Good, it compiles. Let me run the LSP tests again:

  81. Assistant

    All 469 tests pass. Let me now verify the final diff:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.