Skip to content
TheChatArchiveThe Chat Archive
xiaomi/mimo-v2.5-pro· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Schrödinger's comment: it is both commented-out code and a comment…

  1. User

    ISSUE DESCRIPTION

    Schrödinger's comment: it is both commented-out code and a comment that is not code (ERA001 vs RUF100)

    Summary

    First, I'm impressed by the recent reduction of ERA001 false positives. I suspect that ERA001 is an exceptionally difficult rule to implement.

    This is the only time I've seen this situation.

    			# 	)
    			# 	)  # noqa: ERA001
    
    

    Found commented-out code (ERA001) [Ln 1, Col 4] Unused noqa directive (unused: ERA001) (RUF100) [Ln 2, Col 10]

    preview = false
    builtins = []
    target-version = "py310"
    line-length = 88
    indent-width = 4
    
    [lint]
    allowed-confusables = []
    dummy-variable-rgx = "^(_+|(_+[a-zA-Z0-9_]*[a-zA-Z0-9]+?))$"
    extend-select = []
    extend-fixable = []
    external = []
    ignore = []
    select = [ "F", "E4", "E7", "E9", "ERA", "RUF" ]
    
    [format]
    indent-style = "space"
    quote-style = "double"
    

    Playground

    Version

    ruff 0.15.14 (9ad2da301 2026-05-21)

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /ruff, current file: none) bash-$

  2. Assistant

    I'll start by exploring the repository to understand its structure and locate the relevant code. Let's first see what's in the root directory.

  3. Assistant

    The issue is about ERA001 (commented-out code) and RUF100 (unused noqa) conflicting. When a comment that has # noqa: ERA001 is considered commented-out code by ERA001, but then RUF100 says the noqa directive is unused (because ERA001 is suppressed by noqa, making the noqa unused).

    Let me understand the issue better:

    1. ERA001 flags commented-out code
    2. If you add # noqa: ERA001 to suppress it, RUF100 then says the noqa directive is unused because ERA001 is suppressedThis is a contradiction - the noqa suppresses ERA001, which means ERA001 doesn't fire, which makes the noqa appear unused, which triggers RUF100.

    Let me look at how ERA001 is implemented and how noqa directives are handled.

  4. Assistant

    Let me explore the ERA001 rule and RUF100 rule to understand the issue better.

  5. Assistant

    Let me understand the problem. The issue is:

    1. A line with # ) followed by # ) # noqa: ERA0012. ERA001 flags the first line as commented-out code
    2. RUF100 says the noqa: ERA001 on the second line is unused

    The problem is that the # noqa: ERA001 directive is on the same line as the commented-out code, so it should suppress the ERA001 violation. But ERA001 is being detected, AND RUF100 is saying the noqa is unused - which is contradictory.

    This is about the noqa directive handling. Let me look at how noqa directives work in ruff, specifically for ERA001.

  6. Assistant

    Now let me understand the issue. The problem is:

    1. A line like # \t) # noqa: ERA001 is detected as commented-out code by ERA001
    2. But the # noqa: ERA001 directive on that line suppresses the ERA001 diagnostic
    3. RUF100 then sees the # noqa: ERA001 and reports that ERA001 was not actually triggered (since it was suppressed), so the noqa directive is "unused"
    4. But if we remove the noqa directive, ERA001 would fire again

    This is a chicken-and-egg problem. Let me look at how noqa directives are handled and how RUF100 determines if a noqa is unused.

  7. Assistant

    Let me look at the RUF100 (unused noqa) rule and the noqa checker:

  8. Assistant

    Now let me look at the noqa checker to understand how it determines which diagnostics are suppressed and which are unused:

  9. Assistant

    Now let me look at the ERA001 detection logic to understand why it doesn't fire on line 2:

  10. Assistant

    Now let me look at how noqa directives interact with the ERA001 rule. Let me check the detection logic more closely:

  11. Assistant

    Now I understand the issue. Let me reproduce it first:

  12. Assistant

    Let me test this with ruff to reproduce the issue.

  13. Assistant

    Let me reproduce the issue first.

  14. Assistant

    I've reproduced the issue. Let me understand the flow better:

    1. Line 1 (# \t)) - ERA001 fires because comment_contains_code returns true for this line (the content is just ) which matches the "Brackets" positive case pattern ^[()\[\]{}\s]+$).

    2. Line 2 (# \t) # noqa: ERA001) - ERA001 does NOT fire because comment_contains_code looks at the full content ) # noqa: ERA001 which doesn't match any patterns and doesn't parse as Python.

    So ERA001 doesn't fire on line 2, and the noqa: ERA001 directive on line 2 is unused (hence RUF100). But the user's complaint is that if they remove # noqa: ERA001, line 2 becomes # \t) which WOULD trigger ERA001. So there's a paradox: the noqa directive suppresses the detection itself.

    The problem is that comment_contains_code sees the # noqa: ERA001 part as part of the commented-out code, which changes the detection result. The fix should be to strip # noqa directives from the line before checking if it contains code.

    Let me look at how noqa directives are parsed in the codebase:

  15. Assistant

    Let me look more closely at the noqa lexer to understand how to strip noqa from comment text:

  16. Assistant

    Let me look at the is_noqa_uncased function used by the noqa lexer:

  17. Assistant

    Let me look at the is_noqa_uncased function:

  18. Assistant

    Now I understand the issue completely. Let me trace through the logic:

    For line 2: # \t) # noqa: ERA001

    1. comment_contains_code strips leading # and whitespace: ) # noqa: ERA001
    2. The ALLOWLIST_REGEX checks if this STARTS with noqa — it doesn't, it starts with )
    3. POSITIVE_CASES bracket regex ^[()\[\]{}\s]+$ doesn't match because of the # noqa: ERA001 part
    4. parse_module(") # noqa: ERA001") parses ) with a comment, and ) alone is not valid Python
    5. So comment_contains_code returns false — ERA001 doesn't fire
    6. Therefore the # noqa: ERA001 directive is unused, RUF100 fires

    The fix is: comment_contains_code should strip inline # noqa directives from the content before checking, since they're not part of the commented-out code.

    Let me check the existing tests first:

  19. Assistant

    Let me look at the ERA001 test fixtures to understand what's already tested:

  20. Assistant

    Let me look at the snapshot for ERA001 to understand what's expected:

  21. Assistant

    Let me check the snapshot file:

  22. Assistant

    Now let me understand the specific issue. The problem is in comment_contains_code:

    For # \t) # noqa: ERA001, after stripping leading # and whitespace, we get ) # noqa: ERA001. The trailing # noqa: ERA001 makes it not match the POSITIVE_CASES bracket regex and not parse as valid Python, so comment_contains_code returns false — ERA001 doesn't fire on line 2. But the noqa directive is there, and since ERA001 didn't fire, RUF100 says it's unused.

    The fix should be to strip the inline # noqa directive from the comment text before checking if it contains code, since the # noqa suffix is metadata about suppression, not part of the commented-out code.

    Let me look at the noqa lexer to see if there's reusable code for this:

  23. Assistant

    Now I understand the problem completely. Let me trace through what happens for line 2: # \t) # noqa: ERA001

    1. comment_contains_code strips leading # and whitespace → ) # noqa: ERA001
    2. The ALLOWLIST_REGEX checks if this STARTS with noqa — it doesn't, it starts with )
    3. The POSITIVE_CASES bracket regex ^[()\[\]{}\s]+$ doesn't match because of the extra # noqa: ERA001 text
    4. parse_module(") # noqa: ERA001") fails since ) alone isn't valid Python
    5. So comment_contains_code returns false — ERA001 doesn't fire
    6. Therefore RUF100 says the noqa is unused

    But if we strip the # noqa: ERA001 from the text before checking, we'd get ) which DOES match POSITIVE_CASES.

    The fix: in comment_contains_code, strip inline # noqa directives from the comment text before checking if it contains code.

    Let me first create a test file and verify my understanding:

  24. Assistant

    So the issue is clear. For # import os # noqa: ERA001, ERA001 still fires because import os is valid Python that can be parsed even with the trailing comment. But for # ) # noqa: ERA001, the ) is only detected via the POSITIVE_CASES bracket regex, and the trailing # noqa: ERA001 prevents the regex from matching.

    Let me implement the fix. I'll modify comment_contains_code to strip inline # noqa directives before checking:

  25. Assistant

    Now I need to implement the fix. I'll modify comment_contains_code to strip inline # noqa directives from the comment text before checking if it contains code. The key insight is that # noqa: ERA001 at the end of a comment is metadata about rule suppression, not part of the commented-out code.

  26. Assistant

    Now I understand the root cause clearly. Let me implement the fix. The comment_contains_code function needs to strip inline # noqa directives from the comment text before checking if it contains code. When we have # \t) # noqa: ERA001, the function strips the leading # to get ) # noqa: ERA001, but then the # noqa: ERA001 part prevents the code detection from recognizing ) as code (which it would detect on its own as a bracket).

    Let me implement the fix:

  27. Assistant

    Now I understand the issue clearly. Let me trace through what happens:

    1. For line # \t):

      • comment_contains_code strips # and whitespace: )
      • ) matches POSITIVE_CASES regex ^[()\[\]{}\s]+$ → returns true → ERA001 fires
    2. For line # \t) # noqa: ERA001:

      • comment_contains_code strips # and whitespace: ) # noqa: ERA001
      • Wait, actually: trim_start_matches(|char| char == '#' || is_python_whitespace(char)) - this strips all leading # AND whitespace characters. So # \t) # noqa: ERA001 → first it strips #, then \t, then ) # noqa: ERA001 - no wait, ) is not a # or whitespace, so it stops at ). So we get ) # noqa: ERA001. Now:
      • CODE_INDICATORS matches ) → continue
      • Consecutive names check: noqa is a name, : is not a name, ERA001... hmm, let me think. Actually, noqa would be tokenized as a name, and ERA001 would also be a name. And between them there's : which is not a name. So there are no consecutive names. But wait, what about # being a comment character in Python? In the context of SimpleTokenizer, the # would start a comment, so # noqa: ERA001 would be a comment. Let me re-think...

      Actually, SimpleTokenizer is for Python source. When it sees ) # noqa: ERA001, the # starts a comment, so everything after # is a comment token (trivia). Since skip_trivia() is called, the tokenizer only yields ). So there are no consecutive names → continue.

      • Task tags: first word split by , :, ( → ) → not a task tag → continue
      • ALLOWLIST_REGEX: ^noqa doesn't match because line starts with ) → continue
      • HASH_NUMBER: #\d - there's # in # noqa but n follows, not a digit → continue
      • Doesn't end with \ → continue
      • POSITIVE_CASES: ^[()\[\]{}\s]+$ - doesn't match because line has noqa: ERA001 → continue
      • parse_module(") # noqa: ERA001") - this would try to parse ) as Python, and # noqa: ERA001 as a comment. ) alone is not valid Python. So this fails → return false

    So ERA001 doesn't fire on line 2. And RUF100 sees the # noqa: ERA001 as unused because no ERA001 diagnostic was generated for that line.

    The fix should be: when comment_contains_code checks if a comment line contains code, it should strip any trailing # noqa: ... directive from the comment text before checking. This way, ) # noqa: ERA001 becomes ), which matches the positive case and returns true.

    Wait, but actually there's a subtle issue. The comment_contains_code function strips ALL leading # characters AND whitespace. So # \t) # noqa: ERA001 becomes ) # noqa: ERA001. The # noqa part is inside the stripped text.

    The issue is that the # noqa: ERA001 at the end of the comment is treated as part of the commented-out code text, when it's actually a suppression directive.

    So the fix is: before checking if the comment contains code, strip any inline # noqa: ... directive from the comment text.

    Let me think about how to implement this. The approach:

    1. After stripping leading # and whitespace, check if there's a # noqa pattern in the remaining text
    2. If so, strip it (and everything after it) before doing the code detection

    This is tricky because the # noqa could be part of the actual code (e.g., inside a string). But since we're dealing with comments, and # noqa is a well-known directive, this seems like a reasonable approach.

    Actually, let me look at this differently. The ALLOWLIST_REGEX already handles the case where the ENTIRE comment starts with noqa. The problem is when there's code BEFORE the # noqa directive.

    A simpler approach: instead of modifying comment_contains_code, I could modify the commented_out_code function to strip the noqa directive from the line before passing it to comment_contains_code.

    Actually, let me look at the commented_out_code function again:

    pub(crate) fn commented_out_code(
        context: &LintContext,
        locator: &Locator,
        comment_ranges: &CommentRanges,
    ) {
        let mut comments = comment_ranges.into_iter().peekable();
        while let Some(range) = comments.next() {
            let line = locator.line_str(range.start());
            // ...
            if is_own_line_comment(line)
                && comment_contains_code(line, &context.settings().task_tags[..])
            {
                if let Some(mut diagnostic) =
                    context.report_diagnostic_if_enabled(CommentedOutCode, range)
                {
                    // ...
                }
            }
        }
    }
    

    The line passed to comment_contains_code is the full source line. The range is the comment range.

    I think the best approach is to modify comment_contains_code to strip any inline # noqa directive from the comment text before checking.

    Let me look at how to do this. In comment_contains_code:

    let line = line
        .trim_start_matches(|char| char == '#' || is_python_whitespace(char))
        .trim_end();
    

    After this, line is something like ) # noqa: ERA001. We need to strip the # noqa: ERA001 part.

    I could add a regex to match # noqa directives in the middle of a comment:

    // Strip inline noqa directives (e.g., `)  # noqa: ERA001` → `)`)
    static INLINE_NOQA_REGEX: LazyLock<Regex> = LazyLock::new(|| {
        Regex::new(r"(?i)\s+#\s*noqa\b").unwrap()
    });
    

    Then:

    let line = line
        .trim_start_matches(|char| char == '#' || is_python_whitespace(char))
        .trim_end();
    
    // Strip any inline noqa directive that's not at the start of the comment.
    if let Some(mat) = INLINE_NOQA_REGEX.find(line) {
        let line = &line[..mat.start()];
        // Continue checking with the stripped line
    }
    

    Wait, but this would affect all subsequent checks. Let me think about the cleanest way to integrate this.

    Actually, I think the cleanest approach is to strip the inline noqa from the line early in the function, right after the initial trim. Let me implement this.

    But wait, I need to be careful. The # noqa pattern could be inside a string in the commented-out code. For example:

    # x = "# noqa: test"
    

    In this case, we should NOT strip the # noqa because it's part of the code. However, in a comment, # starts a comment in Python, so a # noqa inside a comment would typically be a directive.

    Hmm, but this is exactly the scenario we're dealing with. The entire content after the first # is the comment text. Within that text, # noqa: ERA001 appears. The question is whether it's part of the commented-out code or a directive.

    Looking at the Ruff source, the NoqaLexer specifically looks for # noqa patterns within comments. So the approach of stripping inline noqa directives from comment text seems reasonable.

    Let me check: does # x = "# noqa: test" trigger ERA001 currently? The content after stripping would be x = "# noqa: test". This would be parsed by parse_module and would parse as valid Python. So ERA001 would fire.

    If I strip the # noqa part, it would become x = " which would NOT parse as valid Python. That would be a regression.

    So I need a more careful approach. Let me think...

    Actually, looking at the issue more carefully, the # noqa in a comment is detected by the noqa lexer, which looks for # noqa as a separate comment within the comment range. In the case of # \t) # noqa: ERA001, the comment range includes the entire line. The noqa lexer finds # noqa and treats it as a directive.

    I think the key insight is: the # noqa directive is NOT part of the commented-out code. It's a meta-directive. So when checking if a comment contains code, we should strip the noqa directive first.

    But we need to be careful about false negatives. Let me think about this differently.

    Actually, the NoqaLexer::lex_inline_noqa method is more sophisticated - it looks for the LAST # noqa pattern (actually it scans from left to right and finds the first # noqa). For our purposes, I think we can use a simpler approach: strip any # noqa (case-insensitive) that appears after the start of the comment text.

    Wait, I realize there's another approach. The comment_contains_code function receives the full line. The issue is that the # noqa at the end of the line is treated as part of the code text. But it should be treated as a directive.

    Let me look at how the noqa directive is parsed. In NoqaLexer::lex_inline_noqa:

    fn lex_inline_noqa(mut self) -> Result<Option<NoqaLexerOutput<'a>>, LexicalError> {
        while !self.cursor.is_eof() {
            // Skip over any leading content.
            self.cursor.eat_while(|c| c != '#');
            // ...
            if !self.cursor.eat_char('#') {
                continue;
            }
            self.eat_whitespace();
            if !is_noqa_uncased(self.cursor.as_str()) {
                continue;
            }
            // ...
        }
    }
    

    So the noqa lexer scans for # noqa within the comment. For our case, # \t) # noqa: ERA001, the comment range is the whole line. The lexer would find # noqa at the position of the second #.

    I think the best approach is to modify comment_contains_code (or the caller) to strip the noqa directive from the comment text before checking. Let me implement this carefully.

    Here's my plan:

    1. After stripping leading # and whitespace from the line, check if the text contains # noqa (case-insensitive, as a word boundary match)
    2. If found, strip everything from that # onwards (and any trailing whitespace before it)
    3. Use the stripped text for the code detection

    But I need to be careful about the # noqa appearing inside string literals. However, since we're inside a comment (everything after the first # is comment text), any # noqa in the text is ambiguous - it could be part of the commented-out code or a directive. But given that the Ruff noqa parser already treats it as a directive, I think it's safe to strip it for code detection purposes.

    Actually wait, let me reconsider. The issue is specifically about the case where:

    • # ) is detected as code (ERA001 fires)
    • # ) # noqa: ERA001 is NOT detected as code (ERA001 doesn't fire)
    • But the # noqa: ERA001 is meant to suppress ERA001

    The root cause is that the noqa directive text changes the code detection result. The fix should make the code detection independent of the presence of a noqa directive.

    Let me think of a more targeted fix. The # noqa part of the comment is always at the end of the comment text (after the code part). So I can look for # noqa at the end of the text (with possible trailing content).

    Actually, let me look at the ALLOWLIST_REGEX more carefully. It matches comments that START with one of the allowlisted patterns. The key line is:

    (?i: noqa)
    

    So # noqa: ERA001 → stripped → noqa: ERA001 → matches ALLOWLIST_REGEX → not code.

    But # ) # noqa: ERA001 → stripped → ) # noqa: ERA001 → doesn't match ALLOWLIST_REGEX → continues to code detection.

    I think the fix should be: in comment_contains_code, after the initial stripping, also strip any # noqa suffix. The approach would be to look for # noqa (with word boundary) and strip from that point.

    Let me implement this.

    Actually, I just realized there might be an even better approach. Looking at the code flow:

    1. commented_out_code gets the full line and the comment range
    2. It passes the full line to comment_contains_code
    3. comment_contains_code strips leading # and whitespace, then checks the content

    The issue is that the noqa directive is part of the comment range but is being treated as code content.

    What if we modify the line before passing it to comment_contains_code? We could strip the noqa directive from the line in commented_out_code before calling comment_contains_code.

    But actually, I think modifying comment_contains_code is cleaner because that's where the code detection logic lives.

    Let me look at the issue from the perspective of what needs to happen:

    1. comment_contains_code should determine if the comment text (excluding the noqa directive) looks like code
    2. The noqa directive should not affect the code detection

    So I'll add a step to strip inline noqa directives from the comment text.

    Let me write the code:

    /// Returns `true` if a comment contains Python code.
    pub(crate) fn comment_contains_code(line: &str, task_tags: &[String]) -> bool {
        let line = line
            .trim_start_matches(|char| char == '#' || is_python_whitespace(char))
            .trim_end();
    
        // Strip any inline noqa directive (e.g., `)  # noqa: ERA001` → `)`).
        // This ensures that the presence of a noqa directive doesn't affect code detection.
        let line = strip_inline_noqa(line);
    
        // ... rest of the function
    }
    
    /// Strips an inline `# noqa` directive from a comment.
    ///
    /// Given a string like `)  # noqa: ERA001`, returns `)`.
    fn strip_inline_noqa(line: &str) -> &str {
        // Look for `# noqa` (case-insensitive) pattern
        if let Some(pos) = find_inline_noqa(line) {
            line[..pos].trim_end()
        } else {
            line
        }
    }
    
    /// Finds the position of an inline `# noqa` directive in a comment.
    fn find_inline_noqa(line: &str) -> Option<usize> {
        // Search for `# noqa` pattern (case-insensitive)
        // We look for `#` followed by optional whitespace and `noqa`
        let bytes = line.as_bytes();
        let mut i = 0;
        while i < bytes.len() {
            if bytes[i] == b'#' {
                let rest = &line[i + 1..];
                let rest = rest.trim_start();
                if rest.len() >= 5 && rest[..5].eq_ignore_ascii_case("noqa") {
                    // Make sure it's followed by end-of-string, colon, whitespace, or `#`
                    if rest.len() == 5
                        || rest.as_bytes()[5] == b':'
                        || rest.as_bytes()[5].is_ascii_whitespace()
                        || rest.as_bytes()[5] == b'#'
                    {
                        return Some(i);
                    }
                }
            }
            i += 1;
        }
        None
    }
    

    Wait, but this is complex. Let me use a regex instead, which is already what the codebase uses:

    static INLINE_NOQA_REGEX: LazyLock<Regex> = LazyLock::new(|| {
        Regex::new(r"(?i)#\s*noqa(?=\s*(:|\s*$|#))").unwrap()
    });
    

    Then:

    let line = if let Some(mat) = INLINE_NOQA_REGEX.find(line) {
        line[..mat.start()].trim_end()
    } else {
        line
    };
    

    Hmm, but I need to make sure the regex correctly handles the word boundary. Let me check: # noquack should NOT match. # noqa should match. # noqa: ERA001 should match. # noqaERA001 should NOT match.

    The regex (?i)#\s*noqa(?=\s*(:|\s*$|#)) would:

    • # noqa → matches # noqa (lookahead: end of string or whitespace before end)
    • # noqa: ERA001 → matches # noqa (lookahead: :)
    • # noqaERA001 → does NOT match (lookahead: E which is not :, whitespace, end, or #)
    • # noquack → does NOT match (lookahead: u)

    Wait, (?=\s*(:|\s*$|#)) means: lookahead for optional whitespace, then either :, or whitespace+end-of-string, or #. But for # noqa, the lookahead after noqa is end of string. Is $ inside (...) group captured correctly? Let me think...

    Actually, (?=\s*(:|\s*$|#)) means:

    • After noqa, look ahead for:
      • Optional whitespace, then either:
        • :
        • Optional whitespace then end of string
        • #

    For # noqa: after noqa, we're at end of string. \s* matches zero whitespace, then $ matches end of string. So the lookahead succeeds. ✓

    For # noqa: ERA001: after noqa, \s* matches zero whitespace, then : matches. ✓

    For # noqaERA001: after noqa, E doesn't match any of the alternatives. ✓

    For # noqa ERA001: after noqa, matches \s*, then E doesn't match :, $, or #. Hmm, this would fail. But # noqa ERA001 is not a valid noqa directive anyway (it should be # noqa: ERA001). Actually, wait, looking at the noqa lexer:

    Some(c) if c.is_whitespace() => {
        // Ex) # noqa A comment
        // Ex) # noqa   : F401
    

    So # noqa A comment is a blanket noqa (suppresses all rules). So # noqa ERA001 would also be a blanket noqa. In this case, we should strip it.

    So I need to update the regex to also match when noqa is followed by whitespace (regardless of what follows).

    Actually, looking at the lex_directive method:

    fn lex_directive(mut self) -> Result<NoqaLexerOutput<'a>, LexicalError> {
        let range = TextRange::at(self.offset, self.position());
        match self.cursor.bump() {
            // End of comment
            // Ex) # noqa# A comment
            None | Some('#') => {
                return Ok(NoqaLexerOutput {
                    warnings: self.warnings,
                    directive: Directive::All(All { range }),
                });
            }
            // Ex) # noqa: F401,F842
            Some(':') => self.lex_codes()?,
            // Ex) # noqa A comment
            // Ex) # noqa   : F401
            Some(c) if c.is_whitespace() => {
    

    So after noqa, the next character can be:

    • End of string → blanket noqa
    • # → blanket noqa
    • : → specific codes
    • Whitespace → either a blanket noqa with a comment, or leading whitespace before :

    So any character after noqa that's one of these is valid. The only invalid case is a non-whitespace, non-#, non-:, non-end character.

    So I need: (?i)#\s*noqa(?=[#:\s]|$) or equivalently (?i)#\s*noqa(?![^\s#:]).

    Actually, simpler: (?i)#\s*noqa(?=\s|[:#]|$). After noqa, look for whitespace, :, #, or end of string.

    But wait, # noqaA should NOT match. Let me check: after noqa, A is not whitespace, :, #, or end of string. So it wouldn't match. Good.

    # noqa_ should NOT match. After noqa, _ is not whitespace, :, #, or end of string. Good.

    # noqa should match. After noqa, end of string matches. Good.

    # noqa: ERA001 should match. After noqa, : matches. Good.

    # noqa ERA001 should match. After noqa, matches \s. Good.

    # noqa# comment should match. After noqa, # matches. Good.

    OK, the regex (?i)#\s*noqa(?=\s|[:#]|$) should work.

    But wait, I also need to make sure we're not matching # noqa that appears at the very beginning of the line (after stripping leading # and whitespace). Because that case is already handled by the ALLOWLIST_REGEX. Actually, that's fine - if it's at the beginning, we'd strip everything and get an empty string, which would result in false anyway (since there are no code indicators).

    Hmm, actually let me reconsider. If the line after stripping the first # is just noqa: ERA001, the ALLOWLIST_REGEX handles it. If I also strip it with the inline noqa regex, I'd get an empty string. But that's fine - the result is the same (false).

    But what if the line is noqa something else? After stripping, we'd get something else. Is that correct? Well, # noqa something else is a blanket noqa directive that suppresses all rules. So the entire comment is a directive, not code. The ALLOWLIST_REGEX handles this by matching ^noqa. If I strip the inline noqa, I'd get something else which might be detected as code. That would be a false positive.

    So I need to make sure that the inline noqa regex only matches when the # noqa is NOT at the beginning of the text (after stripping). Or rather, the inline noqa regex should be applied AFTER the ALLOWLIST_REGEX check.

    Wait, but the order of checks in comment_contains_code is:

    1. CODE_INDICATORS fast path
    2. Consecutive identifiers check
    3. Task tag check
    4. ALLOWLIST_REGEX check
    5. HASH_NUMBER check
    6. Continuation check
    7. POSITIVE_CASES check
    8. parse_module check

    If I add the inline noqa stripping before step 1, it would affect all subsequent checks. That might be OK, because:

    • If the line starts with noqa, the ALLOWLIST_REGEX would catch it anyway
    • If the line has # noqa in the middle, stripping it is correct

    Actually, I realize the issue is more subtle. After the initial trim_start_matches, the line is like ) # noqa: ERA001. The # in # noqa is NOT at the beginning of the text - it's in the middle. So the ALLOWLIST_REGEX wouldn't match (since it requires ^noqa).

    OK, let me just implement the fix by stripping inline noqa directives early in the function.

    Actually, I just realized there's another approach. Looking at the function signature:

    pub(crate) fn comment_contains_code(line: &str, task_tags: &[String]) -> bool {
    

    The line parameter is the full source line (e.g., # \t) # noqa: ERA001). After stripping leading # and whitespace, we get ) # noqa: ERA001.

    The issue is that the # noqa: ERA001 part of this string interferes with code detection. The simplest fix is to strip it.

    But I want to be careful not to break the ALLOWLIST_REGEX check. If the line is just # noqa: ERA001, after stripping we get noqa: ERA001. The ALLOWLIST_REGEX matches this (starts with noqa). If I strip the inline noqa, I'd get empty string, which would also result in false. So no issue.

    Let me now implement the fix. I'll add an INLINE_NOQA_REGEX and strip inline noqa directives right after the initial trimming.

    Wait, I realize I should also think about what happens with # noqa (blanket noqa) vs # noqa: ERA001 (specific noqa). Both should be stripped.

    OK, here's my plan:

    1. Add a regex that matches # noqa (case-insensitive) with proper word boundary after noqa
    2. After the initial trim_start_matches/trim_end in comment_contains_code, search for this pattern in the line
    3. If found, strip from the match position to the end of the line (and trim trailing whitespace)
    4. Continue with the rest of the function

    Let me also think about edge cases:

    • # import os # noqa: ERA001 → stripped → import os → ERA001 fires
    • # ) # noqa: ERA001 → stripped → ) → ERA001 fires
    • # noqa: ERA001 → stripped → empty string → not code (correctly)
    • # x = "# noqa" → stripped → x = " → hmm, this might not parse as valid Python. But # noqa inside a string shouldn't be treated as a directive. Let me think...
      • After stripping leading # and whitespace: x = "# noqa"
      • The regex would match # noqa inside the string. But this is actually inside a Python string literal. Hmm.
      • Wait, this is a comment. The entire line is a comment. After stripping the leading #, we have x = "# noqa". The # noqa is inside double quotes, so it's part of a string literal. But our regex doesn't know about Python string literals.
      • If we strip it, we get x = " which doesn't parse as valid Python. But the original x = "# noqa" DOES parse as valid Python (it's assigning a string to x).
      • So this would be a regression - we'd miss a valid ERA001 case.

    Hmm, this is tricky. I need to be smarter about where to look for the # noqa directive. The noqa directive is always at the END of a comment. So I should only strip # noqa if it appears near the end.

    Actually, looking at how noqa directives work in Python: # noqa is always a trailing comment directive. It's placed at the end of a line. In the context of a comment (which is already a comment line), the # noqa would be a "comment within a comment" - i.e., a second # that starts the noqa directive.

    So the pattern is: after the initial # (which starts the comment), there can be some code-like text, followed by an optional # noqa: ... directive at the end.

    I think the safest approach is to look for # noqa only if it's at the END of the line (possibly with trailing whitespace). This way:

    • # ) # noqa: ERA001 → strip # noqa: ERA001 → ) ✓
    • # x = "# noqa" → the # noqa" is not at the end followed by nothing... wait, it IS at the end. Hmm.

    Actually, the " after noqa means the regex wouldn't match # noqa" because after noqa, the next character is " which is not whitespace, :, #, or end of string. So the lookahead (?=\s|[:#]|$) would fail for # noqa". Good!

    Wait, let me re-check: the line after stripping is x = "# noqa". The regex (?i)#\s*noqa(?=\s|[:#]|$) would try to match at each position:

    • At x: not #
    • At : not #
    • At =: not #
    • At : not #
    • At ": not #
    • At #: matches #. Then \s* matches zero whitespace. Then noqa matches. Then lookahead: next char is ". Is " whitespace? No. Is it :? No. Is it #? No. Is it end of string? No. So the lookahead FAILS. The regex doesn't match. ✓

    Great, so # x = "# noqa" would not be affected by the fix.

    What about # x = "# noqa" # noqa: ERA001? After stripping, x = "# noqa" # noqa: ERA001.

    • At the first # (inside the string): lookahead after noqa is ", fails. No match.
    • At the second #: lookahead after noqa is :, matches. So we strip from the second # onwards.
    • Result: x = "# noqa". This parses as valid Python. ✓

    What about # ) # noqa? After stripping, ) # noqa. The regex matches # noqa (lookahead: end of string). Strip to ). POSITIVE_CASES matches. ERA001 fires. ✓

    OK, I'm now confident the approach works. Let me also check: what about # noqa: ERA001? After stripping leading #, we get noqa: ERA001. The regex (?i)#\s*noqa would NOT match because there's no # in noqa: ERA001. The # was already stripped. So the ALLOWLIST_REGEX handles this case. ✓

    And # ) # noqa? After stripping, ) # noqa. The regex matches # noqa. Strip to ). POSITIVE_CASES matches. ✓

    What about # ) # not noqa related? After stripping, ) # not noqa related. The regex tries to match at #: after #, whitespace is consumed by \s*... wait, \s* matches zero or more whitespace. Then noqa needs to match. But the text is # not noqa related. After #, \s* matches , then noqa needs to match not, which fails. So no match. ✓

    What about # ) # noqaERA001? After stripping, ) # noqaERA001. The regex matches #, then \s* matches zero whitespace, then noqa matches noqa, then lookahead: E is not whitespace, :, #, or end. Fails. No match. ✓

    Great, the regex seems solid. Let me now implement the fix.

    Actually, I realize I should also think about the HASH_NUMBER regex. After stripping inline noqa, the HASH_NUMBER check might be affected. For example, # ) # noqa: ERA001 → after stripping → ). The HASH_NUMBER regex #\d would not match ). So no issue.

    But what about # ) # noqa: 123? Well, 123 is not a valid noqa code, so this is an edge case that doesn't matter.

    OK let me now implement the fix.

    Actually, one more thing. I need to make sure the fix doesn't break the existing test cases. Let me check the test for # noqa:

    assert!(!comment_contains_code("# noqa", &[]));
    assert!(!comment_contains_code("# NOQA", &[]));
    assert!(!comment_contains_code("# noqa: A123", &[]));
    assert!(!comment_contains_code("# noqa:A123", &[]));
    

    For # noqa: after stripping → noqa. No # in the text, so inline regex doesn't match. ALLOWLIST_REGEX matches ^noqa. Returns false. ✓

    For # NOQA: after stripping → NOQA. No # in the text. ALLOWLIST_REGEX matches ^(?i:noqa). Returns false. ✓

    For # noqa: A123: after stripping → noqa: A123. No # in the text. ALLOWLIST_REGEX matches ^noqa. Returns false. ✓

    For # noqa:A123: after stripping → noqa:A123. No # in the text. ALLOWLIST_REGEX matches ^noqa. Returns false. ✓

    These all work correctly with the fix.Now, what about the test # import os # noqa: ERA001 (from the fixture file)? After stripping → import os # noqa: ERA001. The inline regex matches # noqa. Strip to import os. This parses as valid Python. ERA001 fires. Then the noqa directive suppresses it. ✓

    And for # "key1": 123, # noqa: ERA001? After stripping → "key1": 123, # noqa: ERA001. The inline regex matches # noqa. Strip to "key1": 123,. This is a partial dictionary entry. POSITIVE_CASES would match the partial dictionary pattern. ERA001 fires. Then the noqa suppresses it. ✓

    Wait, but currently in the snapshot, # "key1": 123, # noqa: ERA001 does NOT trigger ERA001 (it's not in the snapshot output). Let me check... Looking at the snapshot, line 25 (# "key1": 123, # noqa: ERA001) is not listed as an ERA001 violation. That's because the noqa directive suppresses it.

    Hmm, but wait. Currently, does ERA001 fire on # "key1": 123, # noqa: ERA001? Let me think:

    • After stripping: "key1": 123, # noqa: ERA001
    • CODE_INDICATORS: " is not in the list, but : is. So it matches.
    • Consecutive identifiers: Let me think about the tokenizer output... key1 is a Name, : is not, 123 is... hmm, 123 would be an Integer token, not a Name. So no consecutive Names.
    • Task tag: first word is "key1", not a task tag.
    • ALLOWLIST_REGEX: starts with ", doesn't match.
    • HASH_NUMBER: there's # in # noqa, but it's followed by not a digit... wait, #\d means # immediately followed by a digit. In # noqa, # is followed by , so no match.
    • Not ending with \
    • POSITIVE_CASES: The partial dictionary pattern: ^['"]\w+['"]\s*:.+[,{]\s*(#.*)?$
      • "key1": 123, # noqa: ERA001 → matches! "key1" matches ['"]\w+['"], : matches :, 123, # noqa: ERA001 matches .+[,{] (wait, the , matches [,{]), then \s*(#.*)? matches # noqa: ERA001. So yes, this matches POSITIVE_CASES.
    • So ERA001 would fire.
    • Then the noqa directive suppresses it.
    • So in the snapshot, it doesn't appear.

    Wait, but the snapshot DOES list # "key2": 456, and # "key3": 789, # test as ERA001 violations, but NOT # "key1": 123, # noqa: ERA001. This confirms that ERA001 fires on the line but is suppressed by the noqa directive.

    So for this case, the current behavior is correct even without the fix. The issue is only with cases like # ) # noqa: ERA001 where the code part is too simple to parse on its own but is detected by POSITIVE_CASES.

    Now, with my fix, for # "key1": 123, # noqa: ERA001:

    • After stripping: "key1": 123, # noqa: ERA001
    • After stripping inline noqa: "key1": 123,
    • POSITIVE_CASES: "key1": 123, → matches the partial dictionary pattern. ERA001 fires.
    • Then the noqa suppresses it.

    Same result. ✓

    And for # ) # noqa: ERA001:

    • After stripping: ) # noqa: ERA001
    • After stripping inline noqa: )
    • POSITIVE_CASES: ) → matches the bracket pattern. ERA001 fires.
    • Then the noqa suppresses it.

    Fixed! ✓

    OK, I'm confident now. Let me implement the fix.

    One more thought: should I also handle # fmt: off, # type: ignore, etc.? The ALLOWLIST_REGEX handles those when they're at the beginning of the comment. But what about # code # fmt: off? This is less common, but the same issue could apply.

    For now, I'll focus on # noqa since that's the reported issue. Other directives can be handled later if needed.

    Let me write the code:

  28. Assistant

    Let me check what the is_noqa_uncased function looks like and if it's accessible from the eradicate module:

  29. Assistant

    Now let me implement the fix. I'll modify comment_contains_code to strip inline # noqa directives from the comment text before checking if it contains code:

  30. Assistant

    Now let me understand the exact flow. The key issue is in comment_contains_code. For # \t) # noqa: ERA001:

    1. Trim leading # and whitespace: ) # noqa: ERA001
    2. The ALLOWLIST_REGEX doesn't match (starts with ), not noqa)
    3. The POSITIVE_CASES bracket regex ^[()\[\]{}\s]+$ doesn't match (extra text)
    4. parse_module(") # noqa: ERA001") fails () isn't valid Python alone)

    The fix is to strip inline # noqa directives from the comment text before checking, since they're metadata about rule suppression, not part of the commented-out code.

    Let me implement this by modifying comment_contains_code to strip inline # noqa directives:

  31. Assistant

    Now I need to implement the fix. The approach is:

    1. In comment_contains_code, after stripping leading # and whitespace, also strip any inline # noqa directive from the comment text
    2. This ensures the noqa metadata doesn't interfere with code detection

    Let me implement the fix in the detection.rs file:

  32. Assistant

    Now I need to modify the comment_contains_code function to strip inline noqa directives. The key change is to strip # noqa from the comment text before checking if it contains code:

  33. Assistant

    Now let me build and test the fix:

  34. Assistant

    Let me test with the original issue example:

  35. Assistant

    The fix works! The original issue shows:

    • Line 1: ERA001 correctly fires
    • Line 2: No RUF100 anymore! The # noqa: ERA001 is now correctly recognized as used

    Let me test with more cases:

  36. Assistant

    The fix works correctly:

    • Line 1 (# )): ERA001 fires (correct)
    • Line 2 (# ) # noqa: ERA001): ERA001 fires but is properly suppressed by the noqa directive, no RUF100 error (fixed!)
    • Line 3 (# import os # noqa: ERA001): ERA001 fires but is suppressed by noqa (same behavior as before)
    • Line 4 (# import os): ERA001 fires (correct)

    Now let me run the existing tests to make sure I haven't broken anything:

  37. Assistant

    All 13 eradicate tests pass. But I need to check the snapshot test since the ERA001 behavior changed for lines with # noqa:

  38. Assistant

    Let me compare the output with the existing snapshot. Let me check if the test passes:

  39. Assistant

    All tests pass. Let me also run the RUF100 tests and any broader test suite:

  40. Assistant

    All RUF100 tests pass. Let me also run the broader noqa test:

  41. Assistant

    Let me run a broader test to ensure nothing else is broken:

  42. Assistant

    All 91 noqa-related tests pass. Let me verify the final state of my changes:

  43. Assistant

    The fix looks clean and minimal. Let me run a comprehensive test to make sure nothing is broken:

  44. Assistant

    Let me verify the test fixture doesn't have any # ) cases that would now produce new diagnostics:

  45. Assistant

    Good - lines 16, 25, and 30 already have # noqa directives and they were already being suppressed. My change doesn't affect the snapshot because the ERA001 detection result for these lines is the same (code is detected, then noqa suppresses it).

    Let me also verify the RUF100 integration tests:

  46. Assistant

    The filter pattern isn't matching. Let me try a different way:

  47. Assistant

    Let me also run the full linter test to make sure nothing else is broken:

  48. Assistant

    All tests pass. Let me do a final comprehensive check with the issue's exact scenario:

  49. Assistant

    The fix works perfectly:

    • Line 1: ERA001 fires correctly (commented-out code ))
    • Line 2: ERA001 is suppressed by the # noqa: ERA001 directive, and RUF100 correctly recognizes the noqa as used (no RUF100 error!)

    Let me run a few more edge case tests:

  50. Assistant

    All edge cases work correctly:

    1. # import os # noqa: ERA001 → ERA001 suppressed, no RUF100 ✓
    2. # import os → ERA001 fires ✓
    3. # ) # noqa: ERA001 → ERA001 suppressed, no RUF100 (was the bug, now fixed!) ✓
    4. # ) → ERA001 fires ✓
    5. # ) # noqa → ERA001 suppressed by blanket noqa ✓
    6. # import os # noqa: ERA001, F401 → ERA001 suppressed; F401 correctly flagged as non-enabled ✓
    7. # x = 1 # noqa: ERA001 → ERA001 suppressed ✓
    8. # x = 1 → ERA001 fires ✓

    Let me run the full test suite for the ruff_linter crate:

  51. Assistant

    Let me check the main test results:

  52. Assistant

    All 2775 tests pass (plus 11 doctests). Zero failures. Let me do a final review of my changes:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.