ISSUE DESCRIPTION jarvis agents list Traceback Description Learning OpenJarvis on a…
- User
ISSUE DESCRIPTION
jarvis agents list Traceback
Description
Learning OpenJarvis on a Windows machine with WSL2. I was wondering what would happen on a clean reboot and listed the agents. This worked the first two times and listed the "... My Assistant │ deep_research ...". I even used the ID to ask it questions which worked (jarvis agents ask b0e6dece007b "How can I contribute to the OpenJarvis Project"). I had not loaded the model (Gemma 4 31b) into Ollama (this was direct from an open WSL Ubuntu window). My alias for jarvis is jarvis() { cd "@" }
My config is terse # OpenJarvis configuration # Hardware: 13th Gen Intel(R) Core(TM) i9-13900K (32 cores, 62.6 GB RAM) # GPU: NVIDIA GeForce RTX 4090 (24.0 GB VRAM) # Full reference config: jarvis init --full
[engine] default = "ollama"
[engine.ollama] # host = "http://localhost:11434" # set to remote URL if engine runs elsewhere
[intelligence] default_model = "gemma4:31b"
[agent] default_agent = "simple"
[tools] enabled = ["code_interpreter", "web_search", "file_read", "shell_exec"]
Steps to Reproduce
- Start an initial WSL Ubuntu shell
- run "jarvis"
- this will list the --help command
- run "jarvis agents list"
- this will list a table with one agent b0e6dece007b │ My Assistant │ deep_research │ idle │ 0 │ 0
- run "jarvis agents ask b0e6dece007b "How are you""
- this will respond after it loads and starts the model, GPU memory is utilized
- run "ps -aux|grep ollama" in another shell window
- this will output two processes:
- ollama 196 0.0 0.3 3405152 220636 ? Ssl 11:29 0:01 /usr/local/bin/ollama serve
- ollama 1078 66.2 6.9 195616136 4544716 ? Sl 12:39 5:25 /usr/local/bin/ollama runner --ollama-engine --model usr/share/ollama/.ollama/models/blobs/sha256-280af6832eca23cb322c4dcc65edfea98a21b8f8ab07dc7553bd6f7e6e7a3313 --port 42291
- run "jarvis agents ask b0e6dece007b "How can I contribute to the OpenJarvis Project""
- This will respond
- Wait a bit, until GPU memory frees
- run the "ps -aux|grep ollama" in another shell window and see only the one ollam process for the "serve"
- run "jarvis agents list"
- see Traceback
Expected Behavior
Expected the table listing with one idle agent: b0e6dece007b │ My Assistant │ deep_research │ idle │ 0 │ 0
Actual Behavior
Traceback
Operating System
Linux
Python Version
3.12
Hardware
NVIDIA GPU
Engine
Ollama
Logs / Traceback
Traceback (most recent call last): File "/home/gru/projects/OpenJarvis/.venv/bin/jarvis", line 10, in <module> sys.exit(main()) ^^^^^^ File "/home/gru/projects/OpenJarvis/src/openjarvis/cli/__init__.py", line 122, in main cli() File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1485, in __call__ return self.main(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1406, in main rv = self.invoke(ctx) ^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1873, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1873, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1269, in invoke return ctx.invoke(self.callback, **ctx.params) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 824, in invoke return callback(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/src/openjarvis/cli/agent_cmd.py", line 91, in list_agents console.print(f"[red]Error: {exc}[/red]") File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1698, in print renderables = self._collect_renderables( ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1558, in _collect_renderables self.render_str( File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1448, in render_str rich_text = render_markup( ^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/markup.py", line 167, in render raise MarkupError( rich.errors.MarkupError: closing tag '[/red]' at position 65 doesn't match any open tagInterface
No new interfaces are introduced.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /OpenJarvis, current file: none) bash-$
- Assistant
I'll start by inspecting the failing CLI code and reproducing the Rich markup error around agent listing.
- Assistant
The print path is fragile with Rich markup; next I'll inspect the agent manager and how list failures are raised.
- Assistant
rg is not available, I'll use grep instead.
- Assistant
I'll inspect the agent manager status handling and how list_agents can throw.
- Assistant
I'll keep going through the rest of agent_cmd and related tests to see how status markup and errors are handled.
- Assistant
Inspecting the agent row conversion and list_agents implementation next.
- Assistant
Reproducing the markup failure around empty/odd status styles and exception messages.
- Assistant
Checking how Rich handles multi-style tags and unusual status values.
- Assistant
Searching for where agent status values are assigned.
- Assistant
Status values like
needs_attentionmay be unstyled — checking where they're set and how the UI maps them. - Assistant
Confirming which status values produce the same MarkupError position.
- Assistant
Matched the traceback; checking how other UIs style these statuses and scanning agent_cmd for the same pattern.
- Assistant
I'll check scheduler styling and any
stalledstatus handling. - Assistant
Checking for an existing helper and whether other list commands have the same status gap.
- Assistant
I'll inspect how ticks finish on ask failures, then implement the status-style and markup escape fix.
- Assistant
Implementing the fix: map missing statuses, use a non-empty style fallback, and escape exception text in Rich output.
- Assistant
Updating status styling and safe error printing in
list_agents. - Assistant
I'll harden the other exception prints in this file the same way.
- Assistant
I'll replace all of those with escape. Using replace --all.
- Assistant
Verifying list_agents and reproducing the original crash scenarios.
- Assistant
Running related agent CLI tests to make sure nothing broke.
- Assistant
Running the agent_cmd tests and scanning for list coverage.
- Assistant
Also verify style of blank line after imports - I may have dropped a blank line between imports and helper (actually looks fine with PEP8 - two blank lines before top-level constants is optional; one ...
- Assistant
Reverting the unintended
uv.lockchange. - Assistant
I'll end-to-end test the CLI list path against a temporary DB with those statuses.
- Assistant
The list CLI path works; the assertion just failed on truncated status text. Verifying more carefully.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.5-35B-A3BCompare side by side →
Qwen/Qwen3.5-35B-A3BCompare side by side →