ISSUE DESCRIPTION "Extract function" incorrectly returns Nil when extracting from…
- User
ISSUE DESCRIPTION
"Extract function" incorrectly returns
Nilwhen extracting from anonymous functionWhen trying to extract a function from within an anonymous function, the extracted function always returns
Nil, even when incorrect.For example:
fn wibble() { let wobble = fn() { echo "wibble" echo "wobble" // extracting this line } }is turned into
fn wibble() { let wobble = fn() { echo "wibble" function() } } fn function() -> Nil { echo "wobble" Nil // this is incorrect! }I have a fix for it.
Interface
No new interfaces are introduced.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /gleam, current file: none) bash-$
- Assistant
I'll start by exploring the repository structure and locating the code related to the "Extract function" feature.
- Assistant
The extract function feature is likely in the language server. Let me search for related code.
- Assistant
Let me look at the code action related to extract function.
- Assistant
Let me search more specifically for ExtractFunction.
- Assistant
Let me read the ExtractFunction implementation carefully.
- Assistant
Let me look at how the function is built and how the return type is determined.
- Assistant
There's key logic around Nil returns. Let me read that section thoroughly.
- Assistant
Let me read the code that generates statements extraction and determines Tail vs NotTail.
- Assistant
Interesting -
extract_statementsdoesn't take theStatementPosition. Let me check how extraction is dispatched. - Assistant
The bug is likely that anonymous function statements are wrongly classified as NotTail. Let me check how StatementPosition is determined.
- Assistant
Let me read the visitor implementation.
- Assistant
That matches the bug. Let me check how anonymous function bodies are visited in the AST.
- Assistant
Let me read the visit_typed_expr_fn function.
- Assistant
I'll also check case branches and other scopes that might have the same issue.
- Assistant
Hmm, empty - let me try again.
- Assistant
Let me check existing extract function tests and the case visitor.
- Assistant
Let me search for tests involving anonymous functions and the Nil return pattern.
- Assistant
Let me examine the test structure and the NotTail/Nil case.
- Assistant
Let me check the visit_typed_expr_case implementation in ExtractFunction.
- Assistant
Let me check the Visit trait signature for
visit_typed_expr_fn. - Assistant
Let me also check how case clause bodies are visited and look at Vec1 import usage.
- Assistant
There's also handle for anonymous functions in ExtractVariable (around 3789). Let me look at visit_typed_clause to see if case bodies need last_statement_location updating.
- Assistant
The fix is clear. Let me implement
visit_typed_expr_fnforExtractFunction, mirroring the block handling. - Assistant
I'll add
visit_typed_expr_fnright aftervisit_typed_expr_block. - Assistant
Let me verify the needed types are imported.
- Assistant
I need to import
TypeAst. - Assistant
Need to open the file first.
- Assistant
Now I can replace.
- Assistant
Let me examine how the code action tests work so I can reproduce the bug correctly.
- Assistant
Let me look at the assert_code_action macro and how snapshots work.
- Assistant
Let me compile the language-server package to verify my changes compile, and check Cargo.toml for the package name.
- Assistant
I'll compile the package first to verify the changes work.
- Assistant
Need to set up the Rust toolchain.
- Assistant
Let me check if there's a rust-toolchain file and start compiling.
- Assistant
I'll temporarily add a test to reproduce the issue, verify the fix, then remove it.
- Assistant
I'll add a temporary test that reproduces the reported bug.
- Assistant
Checking if
to_selectionexists. - Assistant
Running the temporary test to verify the fix.
- Assistant
The selection may not be complete enough. Let me check how other full-statement extractions work.
- Assistant
Let me examine can_extract_statement and can_extract_expression.
- Assistant
Let me read those methods.
- Assistant
Let me check the
completely_withindefinition. - Assistant
Let me read those.
- Assistant
Let me check how actions are applied and why there might be no action.
- Assistant
I've temporarily modified the test to print available code action titles.
- Assistant
I left an extra brace — fixing that.
- Assistant
Running the diagnostic test.
- Assistant
There's no Extract function action. Let me look at how the action is registered.
- Assistant
Let me read ExtractFunction::code_actions.
- Assistant
Let me find tests that extract echo expressions.
- Assistant
Looking at a related test for selecting a statement expression.
- Assistant
Let me check if selecting an anonymous function goes down a special path, and look for edge cases that clear the extraction.
- Assistant
Let me check the git history for related extract-function work and any known fix.
- Assistant
There's a commit that might be related — inspecting it.
- Assistant
This looks like it could be exactly the fix — let me inspect it.
- Assistant
Not the right commit. Searching more specifically for the Nil issue.
- Assistant
Found a related commit about tail-position.
- Assistant
Let me check how Echo span is defined and look at">"function can't extract solo expression lead cases.
- Assistant
Let me look at TypedExpr Echo definition for location.
- Assistant
Let me find the enum definition for TypedExpr Echo.
- Assistant
Hmm TypedExpr might be in a different file.
- Assistant
Let me look at Echo in typed.rs.
- Assistant
Let me check how RangeSelector works and try a broader selection.
- Assistant
Let me look for the RangeSelector definition.
- Assistant
Trying a multi-statement selection inside the anonymous function, matching the issue description more closely.
- Assistant
Run again.
- Assistant
Single-line selection may match only part of the Echo AST. Checking how echo locations are set.
- Assistant
Let me read infer_echo.
- Assistant
Checking how multi-statement positions and tail identification interact.
- Assistant
Checking README how select_until sets the range end.
- Assistant
to_selectionis zero-width; I needunder_last_char. Updating the test and running it. - Assistant
Running the test to see the snapshot with our fix applied.
- Assistant
The fix looks correct. Verifying the bug existed by temporarily reverting my change.
- Assistant
Temporarily disabling the fix to confirm the original bug.
- Assistant
Running the test without the fix to confirm the bug.
- Assistant
Bug confirmed. Re-applying the fix.
- Assistant
Testing edge cases: middle statement of an anonymous function, and nested functions.
- Assistant
Running the edge-case tests.
- Assistant
Edge cases look correct. Fixing the multi-statement selector and accepting snapshots.
- Assistant
Accept snapshots with INST A_UPDATE=1
- Assistant
The filter didn't match — running each test name explicitly.
- Assistant
Need a filter regex properly.
- Assistant
3 passed. Running the nested and multi-statement cases.
- Assistant
Checking the multi-statement snapshot.
- Assistant
Removing temporary tests and snapshots, then running the existing extract_function tests.
- Assistant
Cleaning up the extra blank line and running the existing extract_function tests.
- Assistant
I accidentally duplicated a line — fixing it.
- Assistant
Confirming action.rs is clean and running the extract_function tests.
- Assistant
All 20 passed. Running the related extract/anonymous tests as well.
- Assistant
Reviewing the final diff and checking status.
- Assistant
Using
ast::TypeAstfor consistency with nearby code and dropping the extra import. - Assistant
Need to open the file first.
- Assistant
I'll keep the visit consistent with other methods by using
ast::TypeAst. - Assistant
Updating the method to use
ast::TypeAst. - Assistant
Need to change TypeAst to 싸ast::TypeAst.
- Assistant
Verifying the fix one last time with a temporary reproduction test.
- Assistant
Final review of the complete diff before submitting.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.5-35B-A3BCompare side by side →
Qwen/Qwen3.5-35B-A3BCompare side by side →