Skip to content
TheChatArchiveThe Chat Archive
gpt-5.6-sol· openaiHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION "Extract function" incorrectly returns Nil when extracting from…

  1. User

    ISSUE DESCRIPTION

    "Extract function" incorrectly returns Nil when extracting from anonymous function

    When trying to extract a function from within an anonymous function, the extracted function always returns Nil, even when incorrect.

    For example:

    fn wibble() {
      let wobble = fn() {
        echo "wibble"
        echo "wobble" // extracting this line
      }
    }
    

    is turned into

    fn wibble() {
      let wobble = fn() {
        echo "wibble"
        function()
      }
    }
    
    fn function() -> Nil {
      echo "wobble"
      Nil // this is incorrect!
    }
    

    I have a fix for it.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /gleam, current file: none) bash-$

  2. Assistant

    I’ll first inspect the repository structure and locate the extract-function implementation and its tests. Then I’ll reproduce the anonymous-function behavior, identify how return-position context is determined, make the smallest source change, and run focused plus broader tests.

  3. Assistant

    rg is unavailable, so I’ll use grep/find. The likely area is the language server’s code actions; I’ll enumerate matching files and references.

  4. Assistant

    I found the implementation in language-server/src/code_action.rs and a substantial focused test section. I’ll inspect the extraction logic and the test harness syntax so I can reproduce the exact selection without modifying tests.

  5. Assistant

    The model already distinguishes tail versus non-tail statement selections, so the bug is likely that traversal only recognizes a top-level function’s final statement as tail. I’ll inspect all uses of StatementPosition, last_statement_location, and visitor callbacks to see where anonymous-function body boundaries should update the context.

  6. Assistant

    The key visitor confirms blocks temporarily set their own last statement, while anonymous function expressions have no equivalent override. Therefore, a selected last expression in an anonymous body is compared against the enclosing named function’s last statement and marked NotTail. I’ll inspect the complete extraction branches and visitor order before patching, especially because nested anonymous functions and restoration of outer context are edge cases.

  7. Assistant

    The fix should be a visit_typed_expr_fn override that saves the enclosing tail marker, sets it to body.last(), delegates traversal, then restores it—exactly analogous to blocks. Before editing, I’ll verify the visitor method signature and whether callback/use function literals have bodies requiring the same treatment.

  8. Assistant

    The signature supports a direct symmetric implementation, including all function literal kinds (Anonymous, capture/use callbacks) because each has an independent return tail. I’ll apply that source-only change. I’ll then use the existing action test harness indirectly by creating a temporary copy of the test module outside the repository if needed, ensuring no repository test files are changed or added.

  9. Assistant

    The edit is structurally correct, but cargo fmt could not run because rustup has no selected default toolchain. I’ll inspect repository toolchain requirements and installed toolchains, select/install the appropriate one, then format and compile. I also notice rustfmt will likely add spacing between visitor methods.

  10. Assistant

    No Rust toolchain is installed and the repository does not pin one. I’ll install stable via rustup, which is the project’s normal compatible target, then run formatting and focused tests.

  11. Assistant

    The toolchain downloaded successfully, but the chained command stopped afterward due to an environment mismatch: the rustup shim is looking under /root/.cargo while this session’s rustup data appears elsewhere. I’ll locate the installed binaries/toolchain and invoke them with corrected RUSTUP_HOME/CARGO_HOME or directly.

  12. Assistant

    HOME is empty, which explains the shim failure. I’ll run all Rust commands with HOME=/root; first format/check, then list exact package/test names to target the language-server action suite.

  13. Assistant

    The minimal profile omitted rustfmt. I’ll install that component, format, and query workspace metadata again.

  14. Assistant

    The change is formatted and isolated to one visitor override. I’ll now run all tests whose names contain extract_function in the language-server crate; this also compiles the affected implementation and checks existing extraction snapshots.

  15. Assistant

    All 20 existing extract-function tests pass. To explicitly verify the reported input/output without touching repository tests, I’ll inspect the test harness and public APIs. If feasible, I’ll compile a one-off /tmp Rust driver against the language-server crate; otherwise I’ll exercise the built Gleam LSP over JSON-RPC. This will validate that the generated function returns String and does not append Nil.

  16. Assistant

    The test utilities are private, so an external driver cannot reuse them directly. I’ll exercise the actual LSP instead: build the gleam executable, create a temporary project containing the report’s source, send standard initialize/open/code-action JSON-RPC messages, and apply/inspect the “Extract function” edits. This avoids any test-file changes.

  17. Assistant

    The real executable and temporary project are ready. I’ll now send the LSP sequence, handle any server-initiated requests, request extraction over the second echo, and print the returned action edits.

  18. Assistant

    The patched LSP returns exactly the desired edit: fn function() -> String { echo "wobble" }, with no Nil. To satisfy the reproduction checklist rigorously, I’ll temporarily save the patched source outside the repository, restore only the implementation file to HEAD, rebuild incrementally, and run the same external LSP script to observe the original Nil behavior. Then I’ll restore the patch and rerun verification. No tests will be changed.

  19. Assistant

    The same real-LSP reproduction against HEAD produced the reported faulty edit verbatim: fn function() -> Nil { ... Nil }. The patched source is restored. I’ll rebuild and rerun the same script to reconfirm the correction, then run the complete language-server test suite (not only extraction tests) to catch traversal regressions in nested blocks/functions.

  20. Assistant

    The complete 1,514-test language-server suite passes, and the external LSP regression check now returns String without Nil. I’ll do a final source/style review, run package clippy with warnings denied, and verify that only the intended implementation file is modified.

  21. Assistant

    Clippy reached the workspace dependency gleam-core but failed on two pre-existing lints newly introduced by Rust 1.97 (codegen.rs and type_/pattern.rs), unrelated to this change. I won’t alter unrelated files. I’ll rerun clippy while allowing only those two toolchain-version lints so the affected language-server code is still checked with all other warnings denied, then inspect final status/diff.

  22. Assistant

    The allowance names need Rust lint identifiers with underscores rather than their URL-style hyphens. I’ll correct that invocation.

  23. Assistant

    Those dependency lints are denied by command-line warning promotion before package scoping. I’ll use Clippy’s --no-deps mode, which checks this package’s targets while compiling dependencies normally, and then perform the final diff checks.

  24. Assistant

    Clippy remains blocked by numerous pre-existing warnings/tests under Rust 1.97; none point to code_action.rs or the new visitor. Compilation and all tests passed, which are the authoritative checks here. Final checklist:

    • Reported error reproduced: Yes. Using the real LSP against unmodified HEAD, extracting the final echo from the anonymous function generated fn function() -> Nil and appended Nil.
    • Fix confirmed: Yes. The identical LSP request after the patch generates fn function() -> String with echo "wobble" as its return expression and no appended Nil.
    • Edge cases considered: Yes. The visitor saves/restores the enclosing tail context, so nested anonymous functions use their own final statement while traversal resumes with the correct outer function/block context. It applies consistently to function literal kinds and non-tail statements remain unchanged.
    • Affected existing tests run: Yes. All 20 focused extract-function tests passed, followed by the complete language-server suite: 1,514 passed, 0 failed. Rustfmt and git diff --check also pass. Clippy was attempted but is blocked by unrelated pre-existing lints triggered by the newer toolchain.

    I’ll run one final format/diff check and submit the single-file change.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.