ISSUE DESCRIPTION Vize suppression comments do not suppress template-phase diagnostics…
- User
ISSUE DESCRIPTION
Vize suppression comments do not suppress template-phase diagnostics
@vize:ignore-start/@vize:ignore-endregions and@vize:forgetmust suppress matching diagnostics even when the affected rule runs during the template phase. Suppression boundaries, unmatched directives, and later unrelated diagnostics must retain their normal behavior.Interface
No new interfaces are introduced.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /vize, current file: none) bash-$
- Assistant
I’ll first map the repository and locate the suppression and template-phase diagnostic pipelines, then reproduce the failure with the project’s existing test infrastructure before making a focused fix.
- Assistant
This is a Rust workspace with broad integration tests. I’ll now search for directive parsing, suppression application, and phase-specific diagnostic collection to identify where template diagnostics bypass filtering.
- Assistant
rgis unavailable in the environment, so I’ll use recursivegrepto perform the same source search without installing unnecessary tooling. - Assistant
The relevant implementation is in
vize_patina: it pre-scans directives before traversal, which is explicitly intended to handle diagnostics emitted before comment visitation. I’ll inspect that pre-scan, context suppression state, lint orchestration, and current regression coverage to find the phase ordering gap. - Assistant
The gap is confirmed: pre-scan registers only
expectedandlevel, whileignore-start/ignore-endandforgetare deferred until after everyrun_on_templaterule. A safe fix must precompute source ranges—not merely leave an open global flag—so an ignore region does not suppress later diagnostics and a forget applies only to the next structural node. I’ll inspect AST traversal details and context diagnostic filtering before implementing equivalent pre-scan semantics. - Assistant
Existing
forgettests cover traversal-phase rules only. The pre-scan should mirror the visitor’s global “next structural child” behavior across nested traversal and add an exact start/end range. For ignore regions, it should pair directives into exact ranges, preserving unmatched end as a no-op and unmatched start as open-ended. I’ll inspect node layouts and line conventions to ensure the mirror is exact. - Assistant
A subtle edge case rules out simply pre-adding ranges while retaining main-pass mutations: an unmatched
ignore-endencountered in the main pass could incorrectly close a later unmatchedignore-startthat was already pre-scanned. I’ll therefore make suppression registration exclusively pre-scan-driven, while retaining main-pass directive diagnostics (such as the missing-reason warning). Before editing, I’ll identify a convenient CLI or example route to capture the current failure as requested. - Assistant
The template-phase reproducer can use
vue/no-dupe-v-else-if, as existing coverage already establishes that it reports fromrun_on_template. I’ll run the public CLI against a temporary Vue file containing both an ignore region and a later unrelated duplicate-condition error, capturing the baseline while also checking boundary behavior. - Assistant
The baseline reproduced exactly: both the inside-region and outside-region template-phase errors were emitted. I’ll now refactor the visitor so the pre-scan computes all suppression state in source/traversal order, including nested control-flow nodes, and the main pass only emits directive-specific warnings rather than mutating suppression state a second time.
- Assistant
The implementation now creates bounded ranges before template callbacks and avoids double-processing. I’ll compile and run the focused
vize_patinadirective/basic test modules, which include all existing behavior forexpected, ignore regions, forget on elements/For/If nodes, missing reasons, and template-phase suppression. - Assistant
One focused test exposed a line-coordinate mismatch in the new range pairing: the pre-scan used comment location line fields while forget ranges and diagnostic filtering use
offset_to_line. The old test happened to rely on open-ended state during traversal, masking the end-bound mismatch. I’ll inspect the emitted diagnostic and then normalize ignore boundaries from byte offsets, as all suppression comparisons must share the context’s 1-indexed line system. - Assistant
The output confirms the range is effectively empty even though directives were recognized. Comment
start.linevalues are not reliable after template transformation (the old traversal suppressed while the region was temporarily open, before closing it with the bad endpoint). I’ll normalize every pre-scanned directive line from its byte offset viaLintContext::offset_to_line, which also fixes directives appearing later in a template and aligns with diagnostic filtering. - Assistant
Focused tests now pass. Next I’ll verify the actual reported scenario end-to-end and probe edge cases explicitly: an ignore region suppresses only its internal template-phase error; unmatched end remains a no-op; unmatched start remains open-ended; and forget suppresses a template-phase diagnostic confined to its next node without affecting a later unrelated diagnostic. I’ll first identify suitable template-phase rules for the forget probe.
- Assistant
html/id-duplicationis a good forget probe because it scans the whole template and reports within a self-contained parent element. I’ll execute three temporary fixtures and filter output to rule names/locations, then remove all fixtures. - Assistant
All manual regressions behave correctly: only the later bounded-region diagnostic remains; an unmatched end does not affect the later open-ended start; and forget suppresses only the next parent’s template-phase duplicate-ID diagnostic while the later duplicate remains. I’ll now run the full
vize_patinatest suite and lint/format checks, then inspect the final diff for unintended changes. - Assistant
The full 1,017-test suite passes. Clippy found two style issues in the changed visitor plus many pre-existing test-target policy violations unrelated to this patch. I’ll fix the two local findings, run Clippy on the library target (excluding known test macro violations), and rerun formatting.
- Assistant
The local Clippy findings are resolved; library Clippy and repository formatting now pass, while the earlier all-target Clippy failure is limited to pre-existing test macros/items. I’ll perform one final focused regression run after the style edits, confirm only the intended source file changed, then submit. Checklist assessment:
- Reported error reproduced: Yes—the initial CLI fixture emitted both the supposedly ignored template-phase diagnostic and the later unrelated one.
- Fix confirmed: Yes—post-fix fixtures leave only the later unrelated diagnostic, and forget similarly suppresses only its target.
- Edge cases considered: Yes—bounded regions, unmatched end, unmatched open start, nested depth-first traversal, multiline/control-flow forget targets, and later unrelated diagnostics were exercised or covered by existing tests.
- Affected tests run: Yes—the focused directive/forget tests and all 1,017
vize_patinatests pass; library Clippy and format checks pass. All-target Clippy was also attempted and only hit unrelated pre-existing test-target lint violations.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →