Skip to content
TheChatArchiveThe Chat Archive
gpt-5.6-sol· openaiHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION "Extract function" incorrectly returns Nil when extracting from…

  1. User

    ISSUE DESCRIPTION

    "Extract function" incorrectly returns Nil when extracting from anonymous function

    When trying to extract a function from within an anonymous function, the extracted function always returns Nil, even when incorrect.

    For example:

    fn wibble() {
      let wobble = fn() {
        echo "wibble"
        echo "wobble" // extracting this line
      }
    }
    

    is turned into

    fn wibble() {
      let wobble = fn() {
        echo "wibble"
        function()
      }
    }
    
    fn function() -> Nil {
      echo "wobble"
      Nil // this is incorrect!
    }
    

    I have a fix for it.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /gleam, current file: none) bash-$

  2. Assistant

    I’ll first inspect the repository structure and status, then locate the extract-function implementation and its tests. I’ll reproduce the anonymous-function case using the project’s established test approach before modifying source code.

  3. Assistant

    rg is unavailable, so I’ll use grep and find. The clean status output indicates there are no pre-existing changes to preserve. I’ll search the language-server code and tests for extraction logic and expected generated return types.

  4. Assistant

    The implementation is in language-server/src/code_action.rs, with a substantial existing test section in language-server/src/tests/action.rs. I’ll inspect the extraction builder and nearby tests to understand how the selected expression’s type and enclosing function are determined.

  5. Assistant

    The design tracks whether selected statements are in tail position using last_statement_location. The symptom strongly suggests that this tracker is being set for module functions but not anonymous function bodies (or is overwritten by outer traversal). I’ll inspect the complete match arms and visitor overrides, especially typed function/expression traversal.

  6. Assistant

    The grep confirms visit_typed_function initializes the tail tracker and blocks temporarily replace it, but there is no corresponding visit_typed_expr_fn override in this visitor. Thus an anonymous function body inherits the enclosing function’s last-statement location, causing its final statement to be classified NotTail. I’ll inspect this visitor section and extraction test harness output mechanism before applying the analogous scoped tracking for anonymous function bodies.

  7. Assistant

    The likely fix is a visitor override that saves the outer tail location, sets it to the anonymous function body’s last statement, recursively visits the function literal, and restores the prior value—matching block scope behavior. Before changing it, I’ll reproduce the report by temporarily adding a standalone test is prohibited (no tests changes), so instead I’ll find whether the test harness supports snapshot review or an executable route. I can use a temporary copy/script outside tracked files or invoke a narrowly filtered existing test after source instrumentation. First I’ll inspect the macro and Cargo test naming/snapshot layout.

  8. Assistant

    The test utilities are private unit-test helpers, so directly reproducing exact edits without altering tests would require driving the language server over JSON-RPC. I’ll first check all existing extract-function tests/snapshots; there may already be an anonymous-body case that demonstrates the baseline bug or a close case whose snapshot can be inspected. This also helps identify edge cases such as nested anonymous functions and blocks.

  9. Assistant

    No existing regression covers statements inside an anonymous function. I’ll reproduce through the actual LSP executable without touching tests: inspect the CLI package/subcommand, create a temporary Gleam project under /tmp, and send framed initialize, initialized, didOpen, and textDocument/codeAction messages selecting echo "wobble". This provides a baseline generated edit from the current code.

  10. Assistant

    The gleam-bin package is named gleam, but its sources may live in the top-level compiler-cli package or bin workspace path. I’ll inspect its manifest and workspace binary definitions, then build only the needed CLI if no executable exists.

  11. Assistant

    The CLI supports gleam lsp. I’ll build it, then use a Python JSON-RPC driver in /tmp so no repository test or source files are added. The driver will collect workspace/applyEdit or returned code-action edits and print the resulting newText, which is sufficient to verify the erroneous appended Nil.

  12. Assistant

    The build could not start because rustup has no default configured; the compound heredoc command also partially continued, leaving an incomplete temporary project. I’ll inspect installed toolchains and the repository’s pinned version/config, select an already-installed compatible toolchain if available, then rerun setup and reproduction in separate guarded steps.

  13. Assistant

    No Rust toolchain is installed. Per the environment guidance, I’ll install stable via rustup and then build. This is necessary both for reproduction and validation; it does not change repository files.

  14. Assistant

    The toolchain is ready. I’ll build the CLI now; after that, I’ll create the temporary project and run the JSON-RPC driver as separate commands to avoid the prior heredoc control-flow issue.

  15. Assistant

    The CLI built successfully. I’ll now run the baseline LSP reproduction. The selected range covers only the final echo "wobble" statement in the anonymous function body; the expected buggy edit should create fn function() -> Nil with a trailing Nil.

  16. Assistant

    The server began responding (C from Content-Length), but Python’s buffered pipe reader consumed additional bytes internally, making select incorrectly time out after the first byte. I’ll adjust the temporary driver to use unbuffered os.read and rerun; this is only harness plumbing, not a product failure.

  17. Assistant

    The baseline exactly reproduces the issue: the extracted edit declares -> Nil and appends Nil. I’ll add the missing scoped visitor for function literals. It will treat the final statement of every anonymous/use callback body as tail while traversing that body, then restore the enclosing scope’s tail marker. This handles nested anonymous functions correctly and avoids affecting statements visited after a literal.

  18. Assistant

    The insertion replaced the existing fn visit_typed_expr_block( signature because edit replaces the targeted line rather than inserting before it. I’ll restore that signature immediately after the new method and remove the extra blank line, then format and compile-check the corrected source.

  19. Assistant

    The first corrective edit revealed that the original new method’s signature was already present one line later, producing a duplicate. The block signature is now restored correctly. I’ll collapse the duplicate two function-signature lines to one and rerun formatting/checks.

  20. Assistant

    The source now parses and formats; the method is the only diff. I’ll add a stylistic blank line between visitor methods, then run the language-server extract-function test subset. After rebuilding the CLI, I’ll rerun the same LSP reproduction and inspect that the edit now returns the expression’s actual String type with no appended Nil.

  21. Assistant

    All 20 existing extract-function tests pass. I’ll rebuild the CLI to link the changed language-server library and rerun the exact same JSON-RPC script. The correct result for echo "wobble" is fn function() -> String { echo "wobble" }, preserving the anonymous function’s return value.

  22. Assistant

    The exact reproduction is fixed: the generated function now returns String and has no trailing Nil. I’ll validate the complementary edge case: extracting a non-final statement from the same anonymous body must still produce Nil, because its value is discarded before the callback’s final expression. Then I’ll run the full language-server test suite and inspect the final diff/status.

  23. Assistant

    The non-tail edge case remains correct (-> Nil with trailing Nil), while the full language-server suite passes all 1,514 tests. I’ll now inspect the exact diff and repository status, run Clippy with warnings denied for the affected crate, and ensure no snapshot or temporary repository files were introduced.

  24. Assistant

    Final checklist:

    • If an error was reported in the issue description, I have successfully reproduced it. I drove the built language server over JSON-RPC with the reported anonymous-function source. Before the fix, extracting the final echo generated fn function() -> Nil and appended Nil.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error. Rebuilding and rerunning the identical LSP request generated fn function() -> String containing only echo "wobble".
    • I have thought about edge cases and made sure my fix handles them as well. I verified extraction of the non-tail first echo still correctly returns Nil. The visitor saves and restores the enclosing tail location, so nested function literals and statements following a literal retain the proper enclosing context; block-local tracking continues to compose with it.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. The focused 20 extract-function tests passed, followed by all 1,514 language-server tests. Formatting and git diff --check passed. Clippy with -D warnings was additionally attempted but is blocked by two unrelated existing warnings in gleam-core under the newly installed Rust 1.97 toolchain; no Clippy warning referenced the changed code.

    The final status contains only language-server/src/code_action.rs, adding scoped tail-position tracking for function-literal bodies. I’ll submit this change now.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.