ISSUE DESCRIPTION jarvis agents list Traceback Description Learning OpenJarvis on a…
- User
ISSUE DESCRIPTION
jarvis agents list Traceback
Description
Learning OpenJarvis on a Windows machine with WSL2. I was wondering what would happen on a clean reboot and listed the agents. This worked the first two times and listed the "... My Assistant │ deep_research ...". I even used the ID to ask it questions which worked (jarvis agents ask b0e6dece007b "How can I contribute to the OpenJarvis Project"). I had not loaded the model (Gemma 4 31b) into Ollama (this was direct from an open WSL Ubuntu window). My alias for jarvis is jarvis() { cd "@" }
My config is terse # OpenJarvis configuration # Hardware: 13th Gen Intel(R) Core(TM) i9-13900K (32 cores, 62.6 GB RAM) # GPU: NVIDIA GeForce RTX 4090 (24.0 GB VRAM) # Full reference config: jarvis init --full
[engine] default = "ollama"
[engine.ollama] # host = "http://localhost:11434" # set to remote URL if engine runs elsewhere
[intelligence] default_model = "gemma4:31b"
[agent] default_agent = "simple"
[tools] enabled = ["code_interpreter", "web_search", "file_read", "shell_exec"]
Steps to Reproduce
- Start an initial WSL Ubuntu shell
- run "jarvis"
- this will list the --help command
- run "jarvis agents list"
- this will list a table with one agent b0e6dece007b │ My Assistant │ deep_research │ idle │ 0 │ 0
- run "jarvis agents ask b0e6dece007b "How are you""
- this will respond after it loads and starts the model, GPU memory is utilized
- run "ps -aux|grep ollama" in another shell window
- this will output two processes:
- ollama 196 0.0 0.3 3405152 220636 ? Ssl 11:29 0:01 /usr/local/bin/ollama serve
- ollama 1078 66.2 6.9 195616136 4544716 ? Sl 12:39 5:25 /usr/local/bin/ollama runner --ollama-engine --model usr/share/ollama/.ollama/models/blobs/sha256-280af6832eca23cb322c4dcc65edfea98a21b8f8ab07dc7553bd6f7e6e7a3313 --port 42291
- run "jarvis agents ask b0e6dece007b "How can I contribute to the OpenJarvis Project""
- This will respond
- Wait a bit, until GPU memory frees
- run the "ps -aux|grep ollama" in another shell window and see only the one ollam process for the "serve"
- run "jarvis agents list"
- see Traceback
Expected Behavior
Expected the table listing with one idle agent: b0e6dece007b │ My Assistant │ deep_research │ idle │ 0 │ 0
Actual Behavior
Traceback
Operating System
Linux
Python Version
3.12
Hardware
NVIDIA GPU
Engine
Ollama
Logs / Traceback
Traceback (most recent call last): File "/home/gru/projects/OpenJarvis/.venv/bin/jarvis", line 10, in <module> sys.exit(main()) ^^^^^^ File "/home/gru/projects/OpenJarvis/src/openjarvis/cli/__init__.py", line 122, in main cli() File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1485, in __call__ return self.main(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1406, in main rv = self.invoke(ctx) ^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1873, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1873, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1269, in invoke return ctx.invoke(self.callback, **ctx.params) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 824, in invoke return callback(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/src/openjarvis/cli/agent_cmd.py", line 91, in list_agents console.print(f"[red]Error: {exc}[/red]") File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1698, in print renderables = self._collect_renderables( ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1558, in _collect_renderables self.render_str( File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1448, in render_str rich_text = render_markup( ^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/markup.py", line 167, in render raise MarkupError( rich.errors.MarkupError: closing tag '[/red]' at position 65 doesn't match any open tagADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /OpenJarvis, current file: none) bash-$
- Assistant
I’ll inspect the agent CLI and its tests first, then reproduce the Rich markup failure with an exception containing markup-like characters. The likely fix is to render dynamic errors as plain text (or escape them) so malformed
[sequences from an underlying Ollama/database error cannot trigger a second exception. I’ll then add the smallest source-only change, run focused and relevant tests, and review the diff. - Assistant
The traceback confirms the secondary failure is in the exception handler:
excis interpolated into a Rich markup string, so an error such as an Ollama response containing[can make the closing[/red]invalid. I’m checking the remainder of this command module and project CLI conventions so the fix is consistent rather than only masking this one line. - Assistant
The module has the same unsafe pattern in every
jarvis agentssubcommand, so fixing onlylistwould leave the same crash reachable throughcreate,info, and others. I’ll replace those dynamic Rich markup messages withmarkup=Falsewhile retaining red styling; this preserves the user-facing output and treats arbitrary exception text literally. I’ll then invokeagents listwith a mocked manager failure containing an unmatched bracket. - Assistant
The source diff now makes all agent-command exception output literal, including unmatched brackets, while keeping the error visually red. Next I’ll run a direct reproduction through Click with
_get_managerpatched to raise an Ollama-like bracketed error, followed by the existing agent CLI tests. - Assistant
The reproduction is fixed: the command exits cleanly and prints the literal bracketed error without
MarkupError; the existing 17 agent CLI tests also pass. I’ll run the related agent manager tests and a lightweight formatting/status check before submitting, then provide the requested checklist rationale. - Assistant
The related test run reached 210 passing tests but stopped on an unrelated pre-existing
TestLoopGuard.test_identical_calls_blockedfailure (the Rust backend did not block the second call). Since it does not involve the changed CLI module, I’ll record it and separately verify the changed file’s whitespace and final diff. - Assistant
The validation command revealed an unrelated
uv.lockmodification (likely produced by the repository environment/test tooling); it is not part of this fix and must not be submitted. I’ll restore only that unrelated file, confirm the source-only diff, and perform one final focused reproduction check.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
- xiaomi/mimo-v2.5-proCompare side by side →
- xiaomi/mimo-v2.5-proCompare side by side →
- xiaomi/mimo-v2.5-proCompare side by side →
- gpt-5.6-solCompare side by side →
- gpt-5.6-solCompare side by side →
- gpt-5.6-solCompare side by side →
- gpt-5.6-solCompare side by side →