ISSUE DESCRIPTION jarvis agents list Traceback Description Learning OpenJarvis on a…
- User
ISSUE DESCRIPTION
jarvis agents list Traceback
Description
Learning OpenJarvis on a Windows machine with WSL2. I was wondering what would happen on a clean reboot and listed the agents. This worked the first two times and listed the "... My Assistant │ deep_research ...". I even used the ID to ask it questions which worked (jarvis agents ask b0e6dece007b "How can I contribute to the OpenJarvis Project"). I had not loaded the model (Gemma 4 31b) into Ollama (this was direct from an open WSL Ubuntu window). My alias for jarvis is jarvis() { cd "@" }
My config is terse # OpenJarvis configuration # Hardware: 13th Gen Intel(R) Core(TM) i9-13900K (32 cores, 62.6 GB RAM) # GPU: NVIDIA GeForce RTX 4090 (24.0 GB VRAM) # Full reference config: jarvis init --full
[engine] default = "ollama"
[engine.ollama] # host = "http://localhost:11434" # set to remote URL if engine runs elsewhere
[intelligence] default_model = "gemma4:31b"
[agent] default_agent = "simple"
[tools] enabled = ["code_interpreter", "web_search", "file_read", "shell_exec"]
Steps to Reproduce
- Start an initial WSL Ubuntu shell
- run "jarvis"
- this will list the --help command
- run "jarvis agents list"
- this will list a table with one agent b0e6dece007b │ My Assistant │ deep_research │ idle │ 0 │ 0
- run "jarvis agents ask b0e6dece007b "How are you""
- this will respond after it loads and starts the model, GPU memory is utilized
- run "ps -aux|grep ollama" in another shell window
- this will output two processes:
- ollama 196 0.0 0.3 3405152 220636 ? Ssl 11:29 0:01 /usr/local/bin/ollama serve
- ollama 1078 66.2 6.9 195616136 4544716 ? Sl 12:39 5:25 /usr/local/bin/ollama runner --ollama-engine --model usr/share/ollama/.ollama/models/blobs/sha256-280af6832eca23cb322c4dcc65edfea98a21b8f8ab07dc7553bd6f7e6e7a3313 --port 42291
- run "jarvis agents ask b0e6dece007b "How can I contribute to the OpenJarvis Project""
- This will respond
- Wait a bit, until GPU memory frees
- run the "ps -aux|grep ollama" in another shell window and see only the one ollam process for the "serve"
- run "jarvis agents list"
- see Traceback
Expected Behavior
Expected the table listing with one idle agent: b0e6dece007b │ My Assistant │ deep_research │ idle │ 0 │ 0
Actual Behavior
Traceback
Operating System
Linux
Python Version
3.12
Hardware
NVIDIA GPU
Engine
Ollama
Logs / Traceback
Traceback (most recent call last): File "/home/gru/projects/OpenJarvis/.venv/bin/jarvis", line 10, in <module> sys.exit(main()) ^^^^^^ File "/home/gru/projects/OpenJarvis/src/openjarvis/cli/__init__.py", line 122, in main cli() File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1485, in __call__ return self.main(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1406, in main rv = self.invoke(ctx) ^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1873, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1873, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 1269, in invoke return ctx.invoke(self.callback, **ctx.params) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/click/core.py", line 824, in invoke return callback(*args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/src/openjarvis/cli/agent_cmd.py", line 91, in list_agents console.print(f"[red]Error: {exc}[/red]") File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1698, in print renderables = self._collect_renderables( ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1558, in _collect_renderables self.render_str( File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/console.py", line 1448, in render_str rich_text = render_markup( ^^^^^^^^^^^^^^ File "/home/gru/projects/OpenJarvis/.venv/lib/python3.12/site-packages/rich/markup.py", line 167, in render raise MarkupError( rich.errors.MarkupError: closing tag '[/red]' at position 65 doesn't match any open tagADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /OpenJarvis, current file: none) bash-$
- Assistant
I’ll inspect the agent CLI and nearby tests to identify how backend/list errors are rendered. The traceback indicates the primary failure may be an Ollama/network exception whose text contains Rich markup brackets, so I’ll reproduce the rendering path and then make error output safe while preserving useful diagnostics. I’ll run focused tests and the broader relevant suite afterward.
- Assistant
The traceback is confirmed by the source:
list_agentsinterpolates arbitrary exception text into a Rich markup string. Any exception containing bracket-like text (common in HTTP/JSON/Ollama errors) can make Rich parse an unmatched closing tag and mask the original error. I’ll inspect the remainder of this module and CLI test patterns, then apply a localized safe rendering helper to all agent command error handlers so the same bug does not recur in adjacent agent subcommands. - Assistant
The module has no existing behavioral test for the failure path, and all agent error handlers use the same unsafe interpolation. The minimal robust fix is to disable markup for exception messages (
markup=False) while retaining red styling for the complete line; this treats brackets in arbitrary backend errors as literal text and avoids changing exception handling or command exit behavior. I’ll patch those handlers and verify the exact Rich failure/fix with a temporary Python snippet plus the CLI tests. - Assistant
The patch is applied and the focused agent CLI suite passes (17 tests). The first standalone reproduction used the system interpreter, which lacks the project dependency, so it did not execute; the repository’s
uvenvironment is available and will be used for verification. I’ll now rerun the reproduction underuv, inspect all remaining unsafe handlers in this command module, and run lint/type-relevant checks plus the full CLI test directory. - Assistant
The targeted reproduction now confirms the original
MarkupErrorand the patched rendering preserves the literal bracketed error. The full CLI suite has one unrelated pre-existing failure intest_ask_context.py(memory backend returnsNone), and Ruff is not installed in the environment; neither is caused by this change. I’ll perform an end-to-endagents listinvocation with a simulated bracketed Ollama error, rerun the focused tests, and review the final diff/status. - Assistant
The simulated
jarvis agents listpath now exits cleanly and prints the original bracketed Ollama error literally; the focused 17-test suite passes. The only unrelated working-tree change is the pre-existinguv.lockmodification shown at the start, so I’ll restore that file to ensure submission contains only the CLI fix, then do a final syntax/diff check.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
- xiaomi/mimo-v2.5-proCompare side by side →
- xiaomi/mimo-v2.5-proCompare side by side →
- xiaomi/mimo-v2.5-proCompare side by side →
- gpt-5.6-solCompare side by side →
- gpt-5.6-solCompare side by side →
- gpt-5.6-solCompare side by side →
- gpt-5.6-solCompare side by side →