Skip to content
TheChatArchiveThe Chat Archive
GLMz-ai/glm-5.2· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Compiler parity: add the current Script Setup TypeScript differential…

  1. User

    ISSUE DESCRIPTION

    Compiler parity: add the current Script Setup TypeScript differential cases and keep the known-failure budget accurate

    Use the existing Vue differential-parity oracle for the current SFC fixture additions. Add and match the upstream Vue output for Script Setup TypeScript cases covering defineOptions options such as inheritAttrs, component name/custom options, and <script setup generic> type parameters.

    Normalization must treat required: true as the default representation expected by the fixture comparison. Regenerate the affected expected snapshots from the real Vue compiler and update the tracked known-failure budget so the coverage command reports exactly the remaining known divergences rather than hiding new failures.

    Evaluation contract

    The required differential corpus for this task is the current Script Setup TypeScript snapshot set, including defineOptions cases and script-setup generic type parameters. Normalize required: true as the default representation expected by the oracle, regenerate those snapshots from the real Vue compiler, and update the tracked known-failure count to exactly the remaining known divergences. Passing a different parity-fixture subset does not satisfy this task.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /vize, current file: none) bash-$

  2. GLM Assistant

    Let me explore the repository structure first to understand what we're working with.

  3. GLM Assistant

    Let me look at the testing infrastructure and the parity oracle setup.

  4. GLM Assistant

    Let me look at the SFC test runner and how the parity oracle works.

  5. GLM Assistant

    Let me find the test runner that uses these fixtures and compares against vize's output.

  6. GLM Assistant

    Let me see the full normalize_code function and the coverage module.

  7. GLM Assistant

    Now let me see the coverage.rs to understand the known-failure budget.

  8. GLM Assistant

    Let me check the current state by running the coverage and seeing what's in the script-setup fixtures/snapshots.

  9. GLM Assistant

    Let me run the coverage to understand the current state.

  10. GLM Assistant

    Let me check if I can build the test runner crate with cargo.

  11. GLM Assistant

    Now let me run the coverage to see the current state.

  12. GLM Assistant

    All passing currently. I need to add new fixture cases. Let me check if I can install @vue/compiler-sfc to generate expected snapshots.

  13. GLM Assistant

    npm is not available. Let me check if there's a network and corepack. Let me look at what tools exist.

  14. GLM Assistant

    which node returned something earlier but type node says not found. Strange. Let me recheck. Earlier node --version returned 24.14.0. Let me recheck.

  15. GLM Assistant

    Earlier node --version returned 24.14.0. That's strange. Maybe the node was available at the start but now PATH changed. Let me look more carefully. Actually the _MEI2LDi60 directory in /tmp looks like a PyInstaller temp dir. The initial output said node --version returned 24.14.0 but that might have been a fluke from the command chain. Let me just check directly.

    Actually wait, in the combined command earlier:

    which pnpm npm node; echo "---"; node --version 2>/dev/null; echo "---"; ls ~/.moon ...
    

    The output was just --- then 24.14.0 then --- then nothing. So which found nothing but node --version returned 24.14.0? That doesn't make sense unless node is a shell function/alias. Hmm. Actually maybe node was available via a different mechanism. Let me search the whole filesystem.

  16. GLM Assistant

    node isn't available now. Let me check the git submodules and any cached node_modules.

  17. GLM Assistant

    I'm in /tmp now. Let me go back to /vize.

  18. GLM Assistant

    Let me check the tools/moon directory which has the generate_expected script.

  19. GLM Assistant

    I need node to run the generate-expected script. Let me check network access.

  20. GLM Assistant

    I have network access. Let me download node and set up @vue/compiler-sfc. First, let me check the expected Vue version.

  21. GLM Assistant

    Let me check the vue-beta catalog version.

  22. GLM Assistant

    The test uses @vue/compiler-sfc@3.6.0-beta.10. Let me download node and install it. Let me check .node-version.

  23. GLM Assistant

    Let me download node 24.14.0 and install @vue/compiler-sfc.

  24. GLM Assistant

    Now I have node and npm. Let me install the needed packages. I'll install them at the repo root with --no-save so the generate-expected script can resolve them.

  25. GLM Assistant

    The package.json has catalog references. Let me install in a clean separate directory and use NODE_PATH.

  26. GLM Assistant

    Now let me test that the generate-expected script works with NODE_PATH.

  27. GLM Assistant

    ESM doesn't use NODE_PATH. Let me symlink node_modules at the repo root.

  28. GLM Assistant

    The script works. Let me check if regenerating the existing snapshots caused any diff (to confirm the Vue version matches what was used originally).

  29. GLM Assistant

    Regenerating changes the existing snapshots. Let me examine the diff to understand what changed.

  30. GLM Assistant

    Let me verify the installed Vue compiler version and check the git history of the snap file.

  31. GLM Assistant

    Let me check what version the existing snap was generated with. Let me look at the commit history and the snap content. Let me check the git log of the coverage.rs to understand the budget evolution.

    Actually, the key question: was the existing snap generated with 3.6.0-beta.10 or an earlier version? The diffs suggest an earlier version. Let me check if maybe there was a vue-beta version change recently. Let me look at git log of pnpm-workspace.yaml.

  32. GLM Assistant

    The snap was last modified after the vue-beta pin, so let me check if vize actually diverges from the regenerated output. Let me run the coverage with the regenerated snap.

  33. GLM Assistant

    Let me investigate the budget philosophy and recent commits about the coverage budget.

  34. GLM Assistant

    Let me look at how the budget was managed in past commits to understand the philosophy.

  35. GLM Assistant

    The 14 failing cases after regeneration exactly match the previously-tracked KNOWN_FAILURES! Let me check the git history of the generate-expected script to understand the version discrepancy.

  36. GLM Assistant

    Let me check if the existing snap was generated with Vue 3.5.34 by installing it and regenerating to compare.

  37. GLM Assistant

    I've confirmed the existing snap was generated with Vue 3.5.x, while the repo's declared compiler (vue-beta) is 3.6.0-beta.10. The 14 revealed failures exactly match the historically-tracked KNOWN_FAILURES. Let me restore the 3.6.0-beta.10 node_modules and plan the additions.

  38. GLM Assistant

    Let me examine the existing defineOptions and generic component cases and their expected outputs.

  39. GLM Assistant

    Let me look at the end of the script-setup.toml to see where to append new cases.

  40. GLM Assistant

    Let me look at the existing expected outputs for defineOptions and generic component cases to understand the format and check what vize produces.

  41. GLM Assistant

    Now I understand the structure. Let me design the new fixture cases. Let me first test a few candidate cases through both Vue and vize to understand divergences. Let me create a temporary harness.

  42. GLM Assistant

    Let me check what vize produces for these candidate cases by adding them to the real fixture and running coverage. First, let me append the new cases to the toml.

  43. GLM Assistant

    Now let me regenerate the snap with Vue 3.6.0-beta.10.

  44. GLM Assistant

    Now let me run coverage with verbose diff to see all failures.

  45. GLM Assistant

    I now have 18 failures (14 existing + 4 new). The 5th new case ("generic component with default type params") passes thanks to required: true normalization. Let me check how the coverage command and budget test are invoked in CI/tests.

  46. GLM Assistant

    CI runs cargo test --workspace and a coverage job. Let me check what the coverage summary script does.

  47. GLM Assistant

    CI runs cargo test --workspace (including the embedded budget test) and the coverage binary. I must update both the budget constants and the embedded budget-tracker test. Let me make the changes to coverage.rs.

  48. GLM Assistant

    Now let me apply this edit to coverage.rs using the edit command.

  49. GLM Assistant

    Now let me edit lines 13-21 (the constants and KNOWN_FAILURES) with the new block.

  50. GLM Assistant

    Now let me update the embedded budget-tracker test to reflect the new budget.

  51. GLM Assistant

    Now let me run the coverage command to confirm it exits 0.

  52. GLM Assistant

    Coverage exits 0 with 18 failures tracked. Now let me run the embedded unit tests.

  53. GLM Assistant

    All tests pass. Let me verify the new cases are present in the snap and check the diff summary.

  54. GLM Assistant

    Let me verify the snap content for the new cases and confirm required: true is present in the regenerated Vue output (to be normalized).

  55. GLM Assistant

    The new cases are present, and the generic component with default type params case exercises the required: true normalization (Vue outputs required: true, vize omits it, normalized to match). Let me check for any other tests referencing the budget or snap counts.

  56. GLM Assistant

    Let me check for any tests that count cases or validate the snap files for sfc.

  57. GLM Assistant

    Let me verify the snap regeneration is idempotent and check the final git diff stat.

  58. GLM Assistant

    Idempotent. Let me run coverage with verbose once more to confirm the failing set exactly matches the 18 known failures (no unexpected).

  59. GLM Assistant

    No unexpected failures, no budget regressions, exit 0. Let me do a final review of the fixture additions.

  60. GLM Assistant

    Let me review the coverage.rs diff.

  61. GLM Assistant

    The diffs look correct. Let me run the test runner tests once more and clean up the temporary node_modules symlink before submitting.

  62. GLM Assistant

    Working tree is clean with only the 3 intended files. Let me run the coverage command once more to confirm it still works without node_modules (it's pure Rust).

  63. GLM Assistant

    Let me verify formatting and run clippy on the test runner to avoid CI style failures.

  64. GLM Assistant

    rustfmt wants the long line wrapped. Let me apply rustfmt.

  65. GLM Assistant

    Now let me re-run the tests and coverage after the fmt change to confirm everything still passes.

  66. GLM Assistant

    Let me run clippy on the test runner to ensure no lint failures.

  67. GLM Assistant

    All checks pass: fmt clean, clippy clean, tests pass, coverage exits 0. Let me do a final review of the complete diff stat.

  68. GLM Assistant

    Everything is in order. No untracked files remain, and the diff contains exactly the 3 intended files.

    Let me summarize the work against the checklist before submitting:

    Reproduction: I confirmed the existing tests/expected/sfc/script-setup.snap was stale — generated with Vue 3.5.x while the repo's declared compiler (catalog vue-beta) is @vue/compiler-sfc@3.6.0-beta.10. Regenerating with the real Vue compiler revealed 14 divergences that were being hidden (these exactly match the historically-tracked fixture debt), plus the new cases I added.

    Fix:

    • Added 5 new Script Setup TypeScript fixture cases to tests/fixtures/sfc/script-setup.toml: defineOptions inheritAttrs only, defineOptions with name only, defineOptions with custom options (covering inheritAttrs, component name, and custom options), and <script setup generic> type-parameter cases generic component with emits and generic component with default type params.
    • Regenerated tests/expected/sfc/script-setup.snap from the real @vue/compiler-sfc@3.6.0-beta.10 via the existing generate-expected.ts oracle (idempotent, 74 cases). The required: true default-representation normalization (already in normalize_code) is what lets generic component with default type params pass — Vue emits required: true, vize omits it, and the oracle normalizes them equal.
    • Updated the known-failure budget in coverage.rs: MIN_SFC_PASSED 159→146, MIN_TOTAL_PASSED 685→672, and KNOWN_FAILURES now lists exactly the 18 remaining divergences (14 revealed existing + 4 new). The embedded tracks_the_current_known_failure_budget test was updated to assert the new budget so cargo test --workspace stays green.

    Verification: cargo run -p vize_test_runner --bin coverage exits 0 reporting 18 known failure(s) tracked with zero unexpected failures and zero budget regressions; cargo test -p vize_test_runner passes (budget tracker + normalize_code_treats_required_true_as_default); cargo clippy and cargo fmt --check are clean. VDOM/Vapor and the other SFC fixtures are untouched (still 100%).

    Now submitting.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.