Skip to content
TheChatArchiveThe Chat Archive
GLMz-ai/glm-5.2· unknownHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Cron sessions do not appear under their assigned project Non-empty…

  1. User

    ISSUE DESCRIPTION

    Cron sessions do not appear under their assigned project

    Non-empty cron or background sessions assigned to a project must be shown when that project is selected. They remain hidden in default, unassigned, empty, and unrelated-project views. The behavior must be consistent across supported session retrieval modes.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /hermes-webui, current file: none) bash-$

  2. GLM Assistant

    I'll start by exploring the repository structure to understand the codebase.

  3. GLM Assistant

    There's a test file test_1079_cron_session_project.py that seems directly relevant. Let me examine it.

  4. GLM Assistant

    Let me look at the api/models.py file, which seems to contain the relevant functions like get_cli_sessions, is_cron_session, ensure_cron_project, etc.

  5. GLM Assistant

    Let me look at how sessions are filtered by project. Let me search for the project filtering logic.

  6. GLM Assistant

    Let me look at the _hide_from_default_sidebar function and is_cli_session_row_visible.

  7. GLM Assistant

    Now let me find the all_sessions function and understand how sessions are retrieved and filtered.

  8. GLM Assistant

    Let me look at how the client filters sessions by project.

  9. GLM Assistant

    Let me look at how the client fetches and caches sessions.

  10. GLM Assistant

    Let me look at the search-related session retrieval and check for other relevant tests.

  11. GLM Assistant

    Let me look at the search endpoint as another session retrieval mode.

  12. GLM Assistant

    The search endpoint uses all_sessions() which already filters out cron sessions via _hide_from_default_sidebar. So search won't find cron sessions either. But search isn't really project-filtered, so that's a separate concern.

    Now, let me understand the "session retrieval modes" mentioned in the issue. Let me re-read: "The behavior must be consistent across supported session retrieval modes."

    Looking at the code, sessions can come from two main sources in /api/sessions:

    1. WebUI sessions (all_sessions())
    2. CLI sessions (get_cli_sessions())

    Both are subject to _hide_from_default_sidebar and is_cli_session_row_visible. The cron sessions are CLI sessions (from state.db). They get a project_id assigned in _load_cli_sessions_uncached. But then in /api/sessions, the deduped_cli is filtered with not _cron_hide(s) where _cron_hide = _hide_from_default_sidebar. So ALL cron sessions are removed from deduped_cli.

    So the fix is: non-empty cron/background sessions with a project_id should be kept in the list so the client can show them when their project is selected. But they should still be hidden from the default (All) view.

    Now there's a tension: the client filters by project locally. If we keep cron sessions in the list, they'd appear in the "All" view too. So we need to also handle the client side.

    Let me check the test test_cron_session_gets_project_id_in_cli_list - it just checks get_cli_sessions() returns a list. So the actual project assignment is tested indirectly.

    Let me check the existing test for visibility behavior. Let me look at test_cron_needs_attention.py and test_issue1140_cron_badge_per_job.py.

    Actually, let me look at what tests might already exist for this behavior, since the issue describes a specific behavior. Let me check the git log to understand recent changes around this.

  13. GLM Assistant

    Let me look at the existing tests that involve _hide_from_default_sidebar and is_cli_session_row_visible.

  14. GLM Assistant

    Let me look at how the client identifies cron/background sessions and the _isCliSession helper.

  15. GLM Assistant

    Let me look at the full render filter logic, especially the withMessages filter.

  16. GLM Assistant

    Let me look at the cron session creation route around line 12166.

  17. GLM Assistant

    Let me look at is_cli_session_row fully.

  18. GLM Assistant

    Let me check the default _sessionSourceFilter and how the source tabs work.

  19. GLM Assistant

    Let me look at the project chip UI test and the test for issue 1611 to understand expected behavior.

  20. GLM Assistant

    Let me look at the test conftest to understand the test server setup.

  21. GLM Assistant

    Let me look at the test_server fixture and _post helper, and how tests interact with the server.

  22. GLM Assistant

    Let me run the existing test_1079 to see the environment state.

  23. GLM Assistant

    So the hermes-agent is not installed. The tests that require agent modules will be skipped. The test_1079 test uses test_server fixture and hits the API. Let me check whether the cron session tests would actually run without the agent. The get_cli_sessions reads from state.db using read_importable_agent_session_rows which is from the agent. Without the agent, get_cli_sessions returns empty (the import would fail and return []).

    So to reproduce the bug, I need to create a state.db with cron sessions. But read_importable_agent_session_rows is from the agent module. Let me check where it's imported.

  24. GLM Assistant

    read_importable_agent_session_rows is called with exclude_sources=None in _load_cli_sessions_uncached, so cron sessions ARE included. They're then removed in the /api/sessions deduped_cli filter via not _cron_hide(s). This is the bug. Let me look at _project_agent_session_rows and _with_normalized_source.

  25. GLM Assistant

    Let me look at _project_agent_session_rows.

  26. GLM Assistant

    Let me check the profile resolution and where state.db should be.

  27. GLM Assistant

    Now let me write a reproduction script to confirm the bug.

  28. GLM Assistant

    I referenced is_cli_session_row_visible_helper which doesn't exist. Let me fix the script to import the actual is_cli_session_row_visible from api.agent_sessions.

  29. GLM Assistant

    Let me check what "background" sessions refer to and look at the cron panel to understand how cron sessions are accessed.

  30. GLM Assistant

    Let me search the tests for any test checking cron sessions appearing via /api/sessions or project filtering.

  31. GLM Assistant

    Let me check the CHANGELOG and docs for #1079 to understand the intended design.

  32. GLM Assistant

    Let me check git status and look for any test that might be the target evaluation test.

  33. GLM Assistant

    Let me look at how cron tests set up state.db to understand the testing patterns.

  34. GLM Assistant

    Let me look at a test that creates state.db and uses the server.

  35. GLM Assistant

    Let me check the default show_cli_sessions setting and load_settings.

  36. GLM Assistant

    Let me look at _is_cli_session_for_settings.

  37. GLM Assistant

    Let me check the test that references _hide_from_default_sidebar source pattern.

  38. GLM Assistant

    Let me search for tests that directly test _hide_from_default_sidebar behavior.

  39. GLM Assistant

    Let me check for any tests that assert cron sessions are hidden by these functions.

  40. GLM Assistant

    Let me check if any tests assert on the withMessages filter expression in sessions.js.

  41. GLM Assistant

    test_issue2351_cli_session_source_filter.py checks exact source patterns for the counts and source filter. Let me view it fully.

  42. GLM Assistant

    Let me check for any test asserting the exact withMessages filter expression.

  43. GLM Assistant

    test_session_batch_select.py:148 asserts "_isSessionEffectivelyStreaming(s)" in src. That's a substring check, not the full withMessages expression. So adding to the withMessages filter is fine as long as _isSessionEffectivelyStreaming(s) still appears.

    Let me check test_session_batch_select.py around line 148 to be sure.

  44. GLM Assistant

    Now I have a clear plan. Let me view the exact withMessages block to edit precisely.

  45. GLM Assistant

    Now let me implement the server-side fix. First, modify _hide_from_default_sidebar in api/models.py.

  46. GLM Assistant

    Now let me verify the server-side change with the repro script (simulating the deduped_cli filter).

  47. GLM Assistant

    The server-side fix works. Let me test _hide_from_default_sidebar directly for edge cases.

  48. GLM Assistant

    All edge cases work. Now let me add the client-side helper. Let me view the area near _isCliSession.

  49. GLM Assistant

    Let me add the _isBackgroundSidebarSession helper after _isCliSession.

  50. GLM Assistant

    Now let me update the withMessages filter and projectFiltered logic. Let me view the current state.

  51. GLM Assistant

    Let me check if any test asserts the exact projectFiltered / unassigned filter expression.

  52. GLM Assistant

    test_sidebar_unassigned_filter.py requires the exact substring profileFiltered.filter(s=>!s.project_id) (with closing paren). Let me view that test fully to understand all constraints.

  53. GLM Assistant

    Let me check all usages of _isCliSession to understand the impact of potentially reclassifying background sessions.

  54. GLM Assistant

    Let me check if any test asserts the exact allMatched.filter arrow-expression form.

  55. GLM Assistant

    No tests reference the exact withMessages arrow form. Let me update the withMessages filter with the background gating, preserving active-session visibility.

  56. GLM Assistant

    The projectFiltered lines are unchanged, preserving the substring assertions. Now let me run the existing relevant tests to make sure nothing breaks.

  57. GLM Assistant

    All pass. Let me run a broader set of relevant tests.

  58. GLM Assistant

    There's a directly relevant failure: test_gateway_sync.py::test_cron_sessions_hidden_from_sidebar_by_default. Let me examine it.

  59. GLM Assistant

    Let me look at _insert_gateway_session and _insert_agent_session_row helpers.

  60. GLM Assistant

    Several tests fail. Let me determine which are pre-existing vs caused by my change. Let me stash my changes and run the failing tests as a baseline.

  61. GLM Assistant

    The baseline confirms most failures are pre-existing (missing node). Let me restore my changes and confirm which test my change actually breaks.

  62. GLM Assistant

    I found a clue earlier: line 472 sends project_id in a request body. Let me examine that context.

  63. GLM Assistant

    The existing test confirms the server now returns the cron session. Let me verify the project_id is set on it by writing a standalone reproduction that exercises the real handler. Let me check how the routes dispatch is structured.

  64. GLM Assistant

    Let me write a standalone script that starts the server subprocess and tests the full /api/sessions flow end-to-end, without touching the tests directory.

  65. GLM Assistant

    Let me write a standalone end-to-end reproduction script that starts the server subprocess.

  66. GLM Assistant

    The end-to-end test confirms the server fix works. Now let me verify the client-side filter logic with a node simulation.

  67. GLM Assistant

    Node isn't available here (consistent with the baseline failures). Let me consider whether to also reclassify background sessions so they appear in the default (webui) tab. Let me examine how _isCliSession is used in the action menu.

  68. GLM Assistant

    Node isn't available (consistent with baseline). My approach (option A: server returns cron sessions, client filters) aligns with "No new interfaces" and the existing client-side filtering. Let me run the relevant Python-only test files to confirm only the expected behavior-change test fails.

  69. GLM Assistant

    Only the expected behavior-change test fails. Let me check for other places that filter cron sessions from the sidebar to ensure consistency across retrieval modes.

  70. GLM Assistant

    The fix is centralized in _hide_from_default_sidebar, used in both all_sessions paths and the deduped_cli filter. Let me check the gateway watcher for any independent cron filtering that might affect session retrieval.

  71. GLM Assistant

    The gateway watcher excludes cron via the default exclude_sources, but that's a change-detection mechanism (the client refetches /api/sessions which is authoritative). Let me check the CLI_VISIBLE_SESSION_LIMIT and _cap_recent_cli_sessions to ensure cron sessions aren't dropped.

  72. GLM Assistant

    Both caps are 20 (pre-existing). The fix is consistent across the two server retrieval paths. Let me run the full test suite to confirm no regressions beyond the one expected behavior-change test.

  73. GLM Assistant

    There's a concerning failure: test_quote_entity_mangling.py::TestAlStashSourceFix::test_js_syntax_valid — this checks JS syntax validity. Let me investigate whether my JS edit caused it.

  74. GLM Assistant

    test_js_syntax_valid runs node --check ui.js — it fails because node isn't installed (pre-existing environment issue, and it checks ui.js, not my sessions.js). Let me confirm by comparing the failure lists before and after my change.

  75. GLM Assistant

    My change introduces exactly ONE new failure — the expected behavior-change test. All 82 other failures are pre-existing (node availability, etc.). Let me verify the key substring assertions still hold after my JS edits.

  76. GLM Assistant

    All substring assertions hold. Let me verify the models.py line that test_sidebar_first_turn_visibility checks still exists.

  77. GLM Assistant

    Both visible_result lines are intact. Now let me add a CHANGELOG entry per the AGENTS.md guidance. Let me check the CHANGELOG format at the top.

  78. GLM Assistant

    Now let me clean up the temp scripts and review the final diff.

  79. GLM Assistant

    The diff looks correct and complete. Let me run the most directly relevant tests once more to confirm everything passes (except the expected behavior-change test).

  80. GLM Assistant

    All pass, including test_imported_cron_sessions_hidden_from_sidebar_by_default (the imported cron session has no project_id, so it correctly stays hidden — confirming unassigned background sessions remain hidden). The only failing test is test_cron_sessions_hidden_from_sidebar_by_default, which encodes the old behavior this issue is explicitly changing.

    Let me do a final full diff review.

  81. GLM Assistant

    The fix is complete and clean. Let me verify the final state of the key logic once more before submitting.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.