ISSUE DESCRIPTION Vize suppression comments do not suppress template-phase diagnostics…
- User
ISSUE DESCRIPTION
Vize suppression comments do not suppress template-phase diagnostics
@vize:ignore-start/@vize:ignore-endregions and@vize:forgetmust suppress matching diagnostics even when the affected rule runs during the template phase. Suppression boundaries, unmatched directives, and later unrelated diagnostics must retain their normal behavior.Interface
No new interfaces are introduced.
ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /vize, current file: none) bash-$
Assistant
Let me explore the repository structure to understand the codebase.
Assistant
This is a Rust/TypeScript monorepo. Let me explore the structure more, focusing on the vize suppression comments functionality.
Assistant
Let me look at the suppression-related files.
Assistant
Now let me understand the issue. The issue says that
@vize:ignore-start/@vize:ignore-endregions and@vize:forgetmust suppress matching diagnostics even when the affected rule runs during the template phase.Currently, I only see
@vize forgetsupport. There's no@vize:ignore-start/@vize:ignore-endsupport. Let me search for those.Assistant
Now I understand the LintContext suppression mechanism. Let me look at the visitor and how template-phase rules report diagnostics.
Assistant
Let me look at the directives tests to understand expected behavior.
Assistant
Let me look at the linter structure and rules to understand which rules run on_template.
Assistant
Let me create a reproduction script. First let me check how to build/run tests.
Assistant
Let me write a reproduction test as a temporary test to confirm the bug.
Assistant
Let me write a reproduction test temporarily in the directives test file, run it, then revert.
Assistant
The bug is confirmed. Let me look at existing forget tests and the directive module.
Assistant
Now let me check the existing forget tests in the basic.rs or directives. Let me search for forget tests in the patina tests.
Assistant
Let me check the AST node types for v-if/v-for.
Assistant
Now I have a clear understanding. Let me look at the exact prescan code to replace.
Assistant
Now let me rewrite the prescan to handle all suppression directives including IgnoreStart/End and Forget.
Assistant
Now let me update the main traversal. First, view the current
visit_childandprocess_vize_directive.Assistant
Now let me update the main traversal. First, remove the
forget_next_elementconsumption blocks invisit_child.Assistant
The
forget_next_elementreferences are removed. Now let me build and run the reproduction tests.Assistant
The region isn't being applied. Let me debug by checking how
comment.directiveis populated and the line numbering.Assistant
Let me check how
create_loccomputes line numbers.Assistant
Let me check the no_dupe_v_else_if rule and how the AST is structured.
Assistant
Let me verify my edits compiled correctly and add temporary debug output.
Assistant
Let me add temporary debug output to understand what's happening.
Assistant
The region end_line is 1, not 3. Let me add debug to the prescan to print each directive's line.
Assistant
The ignore-end comment at offset 74 has line=1, which is wrong. Let me run the existing ignore-region test to compare.
Assistant
The ignore-end comment at offset 79 (line 3) reports
loc.start.line = 1. The parser's comment line numbers are wrong. Let me investigatenewlinesin the parser.Assistant
So the parser has its own
newlinesVec, initialized empty innew(). But is it ever populated? Let me check. The parser.rsnewlinesis separate from the tokenizer'snewlines. Let me search for where parser'snewlinesis populated.Assistant
Found the root cause: the parser's
newlinesis never populated, socomment.loc.start.lineis always1. The linter relies onctx.offset_to_line(offset)for line numbers. Let me revert debug and fix the prescan to useoffset_to_line.Assistant
Now let me view the current
process_vize_directiveto update Expected/Level arms.Assistant
Let me make the Expected/Level arms no-ops in the main traversal since the prescan now handles them with correct line numbers.
Assistant
Now let me build and run the reproduction tests.
Assistant
The forget case needs investigation. Let me re-add debug to the report function.
Assistant
The forget directive uses space separator (
@vize:forget reason), not colon. My repro used the colon form which parses as Unknown. Let me fix the repro.Assistant
All three repro tests pass. Let me remove the debug output.
Assistant
No debug remaining. Now let me remove my temporary repro tests and run the full patina test suite.
Assistant
All 1017 tests pass. Let me verify there isn't a separate "template phase" concept elsewhere that also needs the fix.
Assistant
Let me check the native_type_aware driver which referenced "forget", to be thorough.
Assistant
The native_type_aware driver routes through the same visitor, so it's covered. Let me check the repo-level integration tests for directive suppression.
Assistant
Let me write a comprehensive temporary test to verify edge cases, then remove it.
Assistant
All edge cases pass. Let me clean up the temporary test files.
Assistant
Only
visitor.rsis modified. Let me review the final diff.Assistant
The diff is clean. Let me verify no other references to
forget_next_elementremain and run clippy on the patina crate.Assistant
Clippy is clean. Let me run the directive and basic test modules specifically to confirm.
Assistant
Let me check whether the
SuppressionMap(croquis_cf, JS-comment style// @vize forget) is connected to template-phase diagnostics.Assistant
The
SuppressionMap(croquis_cf) is exported but let me check if it's actually consumed anywhere. It seems to be a standalone module not wired into the main lint pipeline. Theanalyzers.rsreferences// @vize forgetin comments. Let me check if croquis_cf is part of the patina/maestro diagnostic flow.Let me check the vize_croquis_cf crate's role and whether its suppression is used in the diagnostic pipeline. Actually, the issue is specifically about "template-phase diagnostics" which is the patina
run_on_templatephase. The croquis_cf SuppressionMap is a separate, seemingly-unused (or separately-used) mechanism for JS// @vize forgetcomments.Let me verify the croquis_cf SuppressionMap isn't part of the template linting pipeline by checking if patina or maestro imports it.
Assistant
The croquis_cf
SuppressionMapis a separate JS-comment-style mechanism used in the cross-file CLI flow, not the template (run_on_template) phase. Let me confirm its usage in lint.rs is unrelated to the template phase.Assistant
The lint.rs uses SuppressionMap? Let me check the actual import line and where SuppressionMap is used in lint.rs.
Assistant
SuppressionMapisn't actually used in lint.rs. The fix targets the patina template-phase, which is correct. Let me verify type-aware template diagnostics also flow throughLintContext::report(so they're suppressible).Assistant
These type-aware template diagnostics use
push_warninginto aresult, bypassingLintContext::report. Let me examinepush_warningand how the result is finalized.Assistant
The type-aware corsa probes push diagnostics directly into
LintResultviapush_warning, bypassingLintContext::report— they're a separate type-aware phase, not therun_on_template"template phase" the issue describes (and wiring suppression there would require new interfaces, which the issue forbids). My fix correctly targets therun_on_templatephase via the existing prescan mechanism. Let me run the type-aware tests to ensure nothing broke.Assistant
All type-aware tests pass. Let me run the full patina suite once more to confirm everything is green.
Assistant
All 1017 tests pass. Let me ensure downstream crates that depend on patina still compile (maestro, vize CLI).
Assistant
Everything compiles. Let me do a final end-to-end verification using the SFC lint path (which routes through the same visitor) to ensure template-phase suppression works for full SFCs too.
Assistant
The SFC path works correctly. Let me clean up the temporary test file.
Assistant
Let me do a final full test run to confirm everything passes after cleanup.
Assistant
All checks pass. Let me review the final diff once more before submitting.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →