Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek/deepseek-v4-pro· deepseekHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Compiler parity: add the current Script Setup TypeScript differential…

  1. User

    ISSUE DESCRIPTION

    Compiler parity: add the current Script Setup TypeScript differential cases and keep the known-failure budget accurate

    Use the existing Vue differential-parity oracle for the current SFC fixture additions. Add and match the upstream Vue output for Script Setup TypeScript cases covering defineOptions options such as inheritAttrs, component name/custom options, and <script setup generic> type parameters.

    Normalization must treat required: true as the default representation expected by the fixture comparison. Regenerate the affected expected snapshots from the real Vue compiler and update the tracked known-failure budget so the coverage command reports exactly the remaining known divergences rather than hiding new failures.

    Evaluation contract

    The required differential corpus for this task is the current Script Setup TypeScript snapshot set, including defineOptions cases and script-setup generic type parameters. Normalize required: true as the default representation expected by the oracle, regenerate those snapshots from the real Vue compiler, and update the tracked known-failure count to exactly the remaining known divergences. Passing a different parity-fixture subset does not satisfy this task.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /vize, current file: none) bash-$

  2. DeepSeek Assistant

    Let me start by understanding the repository structure and the issue description. The task is about:

    1. Adding Script Setup TypeScript differential cases to the Vue differential-parity oracle
    2. Matching upstream Vue output for Script Setup TypeScript cases covering defineOptions options (like inheritAttrs, component name/custom options) and <script setup generic> type parameters
    3. Normalizing required: true as the default representation
    4. Regenerating affected expected snapshots
    5. Updating the tracked known-failure budget

    Let me explore the repository structure first.

  3. DeepSeek Assistant

    Let me try one command at a time.

  4. DeepSeek Assistant

    This looks like a Rust project with Vue-related functionality. Let me explore more to understand the structure, particularly looking for "parity", "differential", "snapshot" related files.

  5. DeepSeek Assistant

    Let me look for "parity" and "known-failure" and "snapshot" related files.

  6. DeepSeek Assistant

    Let me look at the tests directory more carefully and also search for "known-failure" and "snapshot" references.

  7. DeepSeek Assistant

    Let me look at the tests directory structure.

  8. DeepSeek Assistant

    Let me look at more test files and the fixtures for SFC.

  9. DeepSeek Assistant

    Let me look at the SFC fixtures, the test runner, and search for parity-related code

  10. DeepSeek Assistant

    Let me look at the test runner source code and coverage.rs.

  11. DeepSeek Assistant

    Now let me look at the test runner lib.rs and the expected snapshots directory.

  12. DeepSeek Assistant

    Let me look at the expected snapshots directory and the SFC snapshot specifically

  13. DeepSeek Assistant

    Let me look at the SFC expected snapshots.

  14. DeepSeek Assistant

    Let me look at the script-setup.snap to understand the expected format

  15. DeepSeek Assistant

    Let me look at the full script-setup fixtures and snapshots to understand what cases are already covered.

  16. DeepSeek Assistant

    Let me see the full list of test case names in the script-setup.toml fixture

  17. DeepSeek Assistant

    Let me look at the defineOptions section of

  18. DeepSeek Assistant

    Let me look at the full script-setup.toml to see all test cases (especially TypeScript ones

  19. DeepSeek Assistant

    Let me look at the remaining parts of the script-setup.toml, particularly TypeScript sections.

  20. DeepSeek Assistant

    Let me look at the TypeScript-specific section of the script-setup.toml.

  21. DeepSeek Assistant

    Let me look at the areas around the defineOptions section and the TypeScript cases.

  22. DeepSeek Assistant

    Let me look at the defineOptions snapshot output and the generic component snapshots more

  23. DeepSeek Assistant

    Let me look at the generic component snapshots

  24. DeepSeek Assistant

    Let me look at the tools directory to find how snapshots are generated

  25. DeepSeek Assistant

    Let me look at the generate_expected script

  26. DeepSeek Assistant

    Let me look at the generate-expected.ts script

  27. DeepSeek Assistant

    Let me look at this script.

  28. DeepSeek Assistant

    Let me run the coverage command to understand the current state of failures.

  29. DeepSeek Assistant

    Let me see if there's a pre-built binary or if there's another way to check the current state.

  30. DeepSeek Assistant

    Let me look at the full normalize_code function in the test runner

  31. DeepSeek Assistant

    Let me see the full normalize_code function

  32. DeepSeek Assistant

    Let me try running the coverage command in the background to check status

  33. DeepSeek Assistant

    Now I can see all tests pass at 100%. Let me now check if the generate-expected script can run and regenerate snapshots.

  34. DeepSeek Assistant

    Let me look for any upstream Vue reference or examples of what cases to

  35. DeepSeek Assistant

    Let me look at what SFC fixtures exist and also check the directives fixture

  36. DeepSeek Assistant

    Let me look at what specific TypeScript defineOptions cases are in the snapshot already

  37. DeepSeek Assistant

    Let me look at the normalize_code test and understand the required:true normalization

  38. DeepSeek Assistant

    Let me see the full test function

  39. DeepSeek Assistant

    Let me check if we can install node

  40. DeepSeek Assistant

    Now let me install the Vue compiler packages and run the generate-expected script

  41. DeepSeek Assistant

    Let me use pnpm which is used by this project.

  42. DeepSeek Assistant

    Let me check and install a newer node version

  43. DeepSeek Assistant

    Let me install nvm and switch to the correct node version

  44. DeepSeek Assistant

    Let me set up nvm and install node 24

  45. DeepSeek Assistant

    Now let me install pnpm and project dependencies

  46. DeepSeek Assistant

    Now let me try running the generate-expected script for the sfc/script-setup

  47. DeepSeek Assistant

    Let me check if the snapshot changed

  48. DeepSeek Assistant

    Let me see the full diff

  49. DeepSeek Assistant

    Now let me check the coverage report after snapshot regeneration

  50. DeepSeek Assistant

    Let me look at the specific failures in detail

  51. DeepSeek Assistant

    Let me now look at the current defineOptions cases in the fixture and understand what TypeScript-specific cases need to be added

  52. DeepSeek Assistant

    Let me look at the generic component cases in the fixture

  53. DeepSeek Assistant

    Now I have a clear picture. Let me plan the work:

    1. Add TypeScript defineOptions test cases to script-setup.toml (currently only 1 non-TS case)
    2. Add more generic type parameter cases if needed
    3. Regenerate snapshots from the real Vue compiler
    4. Update the required: true normalization if needed
    5. Update the known-failure budget in coverage.rs

    Let me first add the TypeScript defineOptions test cases.

  54. DeepSeek Assistant

    Let me find the exact location of the defineOptions section

  55. DeepSeek Assistant

    Let me look at the defineOptions section to find the right place to insert new cases

  56. DeepSeek Assistant

    Let me add TypeScript defineOptions test cases. I'll edit the script-setup.toml to add new cases after the existing defineOptions case

  57. DeepSeek Assistant

    Let me open the file and then edit it

  58. DeepSeek Assistant

    Let me use the correct open syntax

  59. DeepSeek Assistant

    Now I'll use the edit command to add the TypeScript defineOptions test cases

  60. DeepSeek Assistant

    Let me use the heredoc syntax for the edit command

  61. DeepSeek Assistant

    Let me use a different approach - write a script to insert the new cases

  62. DeepSeek Assistant

    Let me write the new cases to a file first and then use sed to insert them

  63. DeepSeek Assistant

    Now let me insert the new cases after line 240 of the script-setup.toml

  64. DeepSeek Assistant

    Let me verify the new cases are properly inserted

  65. DeepSeek Assistant

    Let me check the new generic cases too

  66. DeepSeek Assistant

    Now let me regenerate the expected snapshots for the script-setup fixture

  67. DeepSeek Assistant

    Let me verify the new snapshots contain the new cases

  68. DeepSeek Assistant

    Let me look at one of the new snapshots to understand the expected output

  69. DeepSeek Assistant

    Now let me run the coverage report to see the current status

  70. DeepSeek Assistant

    Let me look at the specific failures for the new TypeScript defineOptions cases

  71. DeepSeek Assistant

    Now I have a clear understanding. Let me update the coverage.rs to:

    1. Add all 21 known failures to the KNOWN_FAILURES list
    2. Update the budget numbers to match the new reality
  72. DeepSeek Assistant

    Let me update the budget numbers first

  73. DeepSeek Assistant

    Let me use replace instead

  74. DeepSeek Assistant

    Now update the total budget

  75. DeepSeek Assistant

    Now let me update the KNOWN_FAILURES list with all 21 failures

  76. DeepSeek Assistant

    Now let me update the test that checks the KNOWN_FAILURES length

  77. DeepSeek Assistant

    Let me go to that line and make the change

  78. DeepSeek Assistant

    Let me use the right syntax for

  79. DeepSeek Assistant

    Let me update the test to reflect the new known failure

  80. DeepSeek Assistant

    Now let me update the test assertions since "generic component with extends" is now a known failure

  81. DeepSeek Assistant

    Now let me run the coverage command to verify everything passes

  82. DeepSeek Assistant

    Let me run the test runner's unit tests to verify normalization works correctly

  83. DeepSeek Assistant

    Let me verify the coverage command exits successfully

  84. DeepSeek Assistant

    Let me review the full set of changes

  85. DeepSeek Assistant

    Let me do a final review of the coverage.rs changes

  86. DeepSeek Assistant

    Let me do a final comprehensive check:

  87. DeepSeek Assistant

    Let me verify the new snapshot entries look correct

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.