Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek/deepseek-v4-pro· deepseekHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION "Extract function" incorrectly returns Nil when extracting from…

  1. User

    ISSUE DESCRIPTION

    "Extract function" incorrectly returns Nil when extracting from anonymous function

    When trying to extract a function from within an anonymous function, the extracted function always returns Nil, even when incorrect.

    For example:

    fn wibble() {
      let wobble = fn() {
        echo "wibble"
        echo "wobble" // extracting this line
      }
    }
    

    is turned into

    fn wibble() {
      let wobble = fn() {
        echo "wibble"
        function()
      }
    }
    
    fn function() -> Nil {
      echo "wobble"
      Nil // this is incorrect!
    }
    

    I have a fix for it.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /gleam, current file: none) bash-$

  2. DeepSeek Assistant

    The issue is about an "Extract function" refactoring that incorrectly returns Nil when extracting from an anonymous function. Let me explore the repository to understand the codebase and find where this bug is.

    Let me start by understanding the structure of the repository.

  3. DeepSeek Assistant

    This is a Gleam compiler/language server repository (written in Rust). Let me search for the "extract function" related

  4. DeepSeek Assistant

    Let me look at the code action file since this is likely where the "Extract function" refactoring is implemented.

  5. DeepSeek Assistant

    Let me look at the extract_anonymous_function and related functions more closely:

  6. DeepSeek Assistant

    Let me try with the correct path. The file might be too large to open directly. Let me use grep to find specific sections.

  7. DeepSeek Assistant

    Let me look at the relevant functions:

  8. DeepSeek Assistant

    Let me look at more of the relevant code, particularly where the return type is determined:

  9. DeepSeek Assistant

    Let me look at where extract_anonymous_function is called from and how the return_type is determined

  10. DeepSeek Assistant

    Let me look at how the selection within functions is processed - particularly the visit_typed_statement and visit_typed_expression methods:

  11. DeepSeek Assistant

    Let me look at the visit_typed_statement function and the code that determines what to extract when inside an anonymous function

  12. DeepSeek Assistant

    Let me look at the visit_typed_expr_fn function to understand how anonymous functions are handled:

  13. DeepSeek Assistant

    Let me look at the relevant visit_typed_expr_fn for the extract function code action (around line 3106):

  14. DeepSeek Assistant

    Let me find all the visit_typed_expr_fn implementations and find the one related to extract

  15. DeepSeek Assistant

    Let me look at the visit_typed_expr_fn within the ExtractFunction implementation:

  16. DeepSeek Assistant

    Let me look at the register_function

  17. DeepSeek Assistant

    Let me look at register_function:

  18. DeepSeek Assistant

    Let me look at the ExtractFunction impl more carefully:

  19. DeepSeek Assistant

    Let me look at where this is tested and locate the relevant tests. Let me search for "extract" in the test files

  20. DeepSeek Assistant

    Let me look at the extract function tests and the anonymous function extraction tests

  21. DeepSeek Assistant

    Let me look at the anonymous function extraction tests

  22. DeepSeek Assistant

    Let me look at the test snapshots to understand the expected outputs

  23. DeepSeek Assistant

    Let me look at the default visit_typed_expr_fn implementation to understand how it visits the body:

  24. DeepSeek Assistant

    Let me look at the default visit_typed_expr_fn implementation:

  25. DeepSeek Assistant

    Let me look at the free function visit_typed_expr_fn

  26. DeepSeek Assistant

    Let me look at the default visit_typed_function to understand the flow

  27. DeepSeek Assistant

    Let me look at these:

  28. DeepSeek Assistant

    And the free function:

  29. DeepSeek Assistant

    Let me first run the existing tests to see if there are any failing tests related to this:

  30. DeepSeek Assistant

    Let me check the Rust toolchain

  31. DeepSeek Assistant

    Let me check for a rust-toolchain file

  32. DeepSeek Assistant

    Let me set up the Rust toolchain

  33. DeepSeek Assistant

    Now I understand the issue. Let me verify my theory by looking at the relevant code sections once more.

  34. DeepSeek Assistant

    Now I'm confident about the fix. The issue is that when visiting anonymous function bodies, self.last_statement_location is not updated. This means statements inside anonymous functions are never considered to be in tail position, causing extract_statements to be used (which appends Nil) instead of extract_code_in_tail_position.

    Let me implement the fix:

  35. DeepSeek Assistant

    Let me open the file first and then edit:

  36. DeepSeek Assistant

    Now I can see the code clearly. Let me add the visit_typed_expr_fn override:

  37. DeepSeek Assistant

    Let me use a different approach - I'll use sed to make the insertion

  38. DeepSeek Assistant

    Let me verify the change was applied correctly:

  39. DeepSeek Assistant

    The edit went wrong. Let me revert and redo properly.

  40. DeepSeek Assistant

    Let me verify the revert:

  41. DeepSeek Assistant

    Good, reverted. Now let me insert properly. I need to add the new method between line 11265 (blank line) and line 11266 (fn visit_typed_expr_block

  42. DeepSeek Assistant

    Let me verify the result:

  43. DeepSeek Assistant

    The change looks correct. Let me now try to compile to verify:

  44. DeepSeek Assistant

    The body is a Vec1 not a slice. Let me check how to get the last element from Vec1:

  45. DeepSeek Assistant

    Let me find Vec1 definition and its methods

  46. DeepSeek Assistant

    Vec1 might be from the vec1 crate. Let me check how it's used elsewhere in the codebase:

  47. DeepSeek Assistant

    Let me check how Vec1's last is accessed elsewhere in the codebase

  48. DeepSeek Assistant

    I see - Vec1::last() returns a reference directly. Let me fix the code:

  49. DeepSeek Assistant

    Now let me verify and compile:

  50. DeepSeek Assistant

    It compiles. Now let me run the tests to verify:

  51. DeepSeek Assistant

    Let me also run the anonymous function extraction tests:

  52. DeepSeek Assistant

    Let me run all the extract-related tests and the full action test suite to make sure nothing is broken

  53. DeepSeek Assistant

    All tests pass. Now let me think about whether the fix is complete. Let me also consider if there are other places where last_statement_location needs to be updated for anonymous functions.

    Actually, wait. Let me re-think the fix. The issue is about extracting from WITHIN an anonymous function. My fix adds visit_typed_expr_fn to properly update last_statement_location. But I need to also consider: when extracting a statement from within an anonymous function, is it correct to treat the last statement of the anonymous function as being in tail position?

    Actually yes - the extracted function is a standalone function. If the statement being extracted is in tail position of the anonymous function body, it means the anonymous function returns that value. But when we extract it, the extracted function should also return that value (not Nil).

    Wait, actually there's a subtlety. Let me think about the example from the issue:

    fn wibble() {
      let wobble = fn() {
        echo "wibble"
        echo "wobble" // extracting this line
      }
    }
    

    echo "wobble" is in tail position of the anonymous function. So is_in_tail_position = true, and position = StatementPosition::Tail { type_: statement.type_() }.

    Then in the match:

    ExtractedValue::Statements {
        location,
        position: StatementPosition::Tail { type_ },
    } => self.extract_code_in_tail_position(
        location,
        location,
        type_,
        extracted.parameters,
        end,
    ),
    

    extract_code_in_tail_position will be called with the statement's type. For echo "wobble", that's Nil. The generated function will be:

    fn function() -> Nil {
      echo "wobble"
    }
    

    No extra Nil appended. That's correct!

    And if we extract a non-tail statement from the anonymous function, e.g.:

    fn wibble() {
      let wobble = fn() {
        echo "wibble" // extracting this
        echo "wobble"
      }
    }
    

    Then is_in_tail_position = false, position = StatementPosition::NotTail, and extract_statements is called. With no returned variables, it adds Nil:

    fn function() -> Nil {
      echo "wibble"
      Nil
    }
    

    That's also correct for a side-effect-only statement.

    So my fix looks correct. Let me also test the opposite scenario - what if the statement returns something non-Nil:

    fn wibble() {
      let wobble = fn() {
        let x = 1
        x + 2 // extracting this (returns Int)
      }
    }
    

    With my fix, x + 2 would be in tail position of the anonymous function, so extract_code_in_tail_position would be called with the Int type, producing:

    fn function() -> Int {
      x + 2
    }
    

    Without the fix, it would be considered NOT in tail position, and extract_statements would be called with no returned variables, producing:

    fn function() -> Nil {
      x + 2
      Nil
    }
    

    Which is the bug described in the issue!

    Now, let me also think about whether there are other considerations. The issue description says "I have a fix for it." - this suggests the user knows what the fix should be, and my fix seems like the obvious one.

    Let me also check if there might be a need to handle visit_typed_expr_fn in a way that only updates when we're inside the selected range, similar to how visit_typed_function only updates when within range. Actually, looking at the code flow:

    1. visit_typed_function only enters the function if the selection is within range
    2. Inside the function, the visitor traverses expressions and statements
    3. Anonymous functions are expressions, so they're visited via visit_typed_expr
    4. The default visit_typed_expr_fn is called, which visits the body statements

    The last_statement_location should only be updated when we're inside the selection range. But since we only enter visit_typed_function when the selection is in range, and the anonymous function is within that function's body, we should be fine.

    However, there's a subtlety: what if the selection spans across multiple anonymous functions? In that case, we'd enter the first function's body, and then when we encounter the second anonymous function via visit_typed_expr_fn, we'd update last_statement_location to the second's last statement. This would make the first function's statements not be in tail position, but that's correct since they're not the last statement overall.

    Wait, actually no. When extracting across multiple anonymous functions, the extracted statements would all be in the same extracted function. The last_statement_location should be the very last statement among ALL selected statements. The current behavior of visit_typed_expr_block and my new visit_typed_expr_fn would set it to the innermost block's/fn's last statement. This seems correct for determining whether a statement is the last one being extracted.

    Actually, let me trace through more carefully. Consider:

    fn wibble() {
      let wobble = fn() {
        echo "a"  // select from here
        echo "b"
      }
      echo "c"  // to here
    }
    
    1. visit_typed_function sets last_statement_location to echo "c" (last statement of wibble)
    2. Visitor enters wibble body
    3. Encounters let wobble = fn() { ... } - visits this assignment statement
    4. Inside, visits the fn() expression
    5. My visit_typed_expr_fn sets last_statement_location to echo "b" (last of anonymous fn body)
    6. Visits echo "a" - is_in_tail_position checks against echo "b" → false
    7. Visits echo "b" - is_in_tail_position checks against echo "b" → true
    8. Restores last_statement_location to echo "c" (the outer function's last)
    9. Back in wibble body, visits echo "c" - is_in_tail_position checks against echo "c" → true

    So echo "b" and echo "c" are both in tail position. But the extracted function would have echo "c" as the last statement (since it's merged). The position tracking seems to work correctly here.

    Hmm, actually, looking at the code, when multiple statements are selected, the position tracks whether the LAST statement in the selection is in tail position. Let me look at that logic again:

    Some(ExtractedFunction {
        value:
            ExtractedValue::Statements {
                location,
                position: extracted_position,
            },
        ..
    }) => {
        *location = location.merge(&statement_location);
        *extracted_position = position;
    }
    

    Yes, the position is updated to the most recent statement's position. So the position reflects whether the last selected statement is in tail position. This is correct.

    My fix looks good. Let me now also run a broader set of tests to make sure nothing else is broken.

    Actually, let me also think about whether there could be a case where my fix causes a regression. Consider:

    fn wibble() {
      let wobble = fn() {
        echo "a"
      }
      echo "b"
    }
    

    If we select echo "a" (inside the anonymous function), then:

    • Without my fix: last_statement_location = echo "b", echo "a" is NOT in tail position → extract_statements with Nil appended
    • With my fix: last_statement_location = echo "a" (updated by visit_typed_expr_fn), echo "a" IS in tail position → extract_code_in_tail_position without Nil appended

    With my fix, the extracted function would be:

    fn function() -> Nil {
      echo "a"
    }
    

    Without my fix:

    fn function() -> Nil {
      echo "a"
      Nil
    }
    

    My fix is correct! The extracted function should just be echo "a", not echo "a" followed by Nil.

    Now let me also run a few more tests to verify no regressions:Let me also run the extract_statements_in_tail_position test to make sure it still passes:

  54. DeepSeek Assistant

    Let me run all the action tests to make sure nothing is broken

  55. DeepSeek Assistant

    All 871 tests pass. Let me verify the final state of my change:

  56. DeepSeek Assistant

    The fix looks correct. Let me go through the checklist:


    Checklist:

    1. If an error was reported in the issue description, I have successfully reproduced it.
      While I couldn't interactively reproduce it (this is a language server code action), I traced through the code to confirm the bug. The ExtractFunction visitor's visit_typed_expr_fn method was not overridden, so self.last_statement_location was never updated when entering anonymous function bodies. This meant any statement extracted from within an anonymous function was never considered to be in "tail position," causing extract_statements (which always appends Nil) to be called instead of extract_code_in_tail_position.

    2. If an error was reported in the issue description, I have confirmed that my fix resolves the error.
      The fix adds a visit_typed_expr_fn override (matching the pattern used by visit_typed_expr_block) that saves last_statement_location, updates it to the anonymous function body's last statement, visits the body, and then restores it. This correctly identifies when a statement is in tail position within the anonymous function, so extract_code_in_tail_position is called without the spurious Nil.

    3. I have thought about edge cases and made sure my fix handles them as well.

      • Nested anonymous functions: The save/restore pattern handles nesting correctly.
      • Anonymous functions inside blocks: Both visit_typed_expr_block and visit_typed_expr_fn use save/restore, so they compose correctly.
      • Non-Nil expressions in tail position: Now correctly use the expression's type as the return type instead of Nil.
      • Multiple selected statements across anonymous function boundaries: The position tracking updates with each statement, and the last statement's position determines the final behavior.
    4. I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass.
      All 871 action tests pass (including all extract_function*, extract_anonymous*, extract_statements*, extract_variable*, and extract_constant* tests).


    The fix is ready to submit.The fix is complete and all tests pass. Let me submit:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.