Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek/deepseek-v4-pro· deepseekHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION Vize suppression comments do not suppress template-phase diagnostics…

  1. User

    ISSUE DESCRIPTION

    Vize suppression comments do not suppress template-phase diagnostics

    @vize:ignore-start / @vize:ignore-end regions and @vize:forget must suppress matching diagnostics even when the affected rule runs during the template phase. Suppression boundaries, unmatched directives, and later unrelated diagnostics must retain their normal behavior.

    Interface

    No new interfaces are introduced.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /vize, current file: none) bash-$

  2. DeepSeek Assistant

    Let me start by exploring the repository structure to understand what we're dealing with.

    The issue is about "Vize suppression comments do not suppress template-phase diagnostics". This seems to be a linting or static analysis tool. The @vize:ignore-start / @vize:ignore-end and @vize:forget comments should suppress diagnostics even during the template phase.

    Let me explore the repository first.

  3. DeepSeek Assistant

    This looks like a Rust project (Cargo.toml). Let me explore further to understand the structure.

  4. DeepSeek Assistant

    Let me look at the main crate and understand what the project does.

  5. DeepSeek Assistant

    Let me search for the suppression-related code in the repository.

  6. DeepSeek Assistant

    Let me look at the suppression module and the relevant code:

  7. DeepSeek Assistant

    Let me search for the ignore-start/ignore-end patterns:

  8. DeepSeek Assistant

    Let me look at the directive parser:

  9. DeepSeek Assistant

    Now let me look at how suppression is used in the template phase. Let me look at the template queries:

  10. DeepSeek Assistant

    Let me look at the template-aware driver:

  11. DeepSeek Assistant

    Now let me look at the context and visitor modules to understand how suppression is applied:

  12. DeepSeek Assistant

    Now let me look at the visitor to understand how suppression directives are processed:

  13. DeepSeek Assistant

    Now I understand the issue. Let me look at how the prescan works and what's missing. The prescan_suppression_directives only handles Expected and Level directives but not IgnoreStart, IgnoreEnd, and Forget. This means template-phase diagnostics (from run_on_template) fire before these suppression directives are registered.

    Let me check the test files for directives to understand expected behavior:

  14. DeepSeek Assistant

    Let me search for template-phase rules to understand which diagnostics are affected:

  15. DeepSeek Assistant

    Let me look at the Rule trait:

  16. DeepSeek Assistant

    Let me look at the TemplateChildNode type to understand all variants:

  17. DeepSeek Assistant

    Now I understand the issue. The prescan_suppression_directives function in visitor.rs only pre-scans for Expected and Level directives. It needs to also handle IgnoreStart, IgnoreEnd, and Forget so that template-phase diagnostics (from run_on_template) can be suppressed.

    Let me implement the fix:

  18. DeepSeek Assistant

    Let me use the replace command instead. Let me first view the exact content of the function I need to modify:

  19. DeepSeek Assistant

    Now I can see the full file. Let me view lines 100-120 to see the rest of the prescan function:

  20. DeepSeek Assistant

    Now I'll use the replace command to update the prescan functions. I need to replace the old prescan with the new one that handles IgnoreStart, IgnoreEnd, and Forget:

  21. DeepSeek Assistant

    Let me look at the exact content around line 68:

  22. DeepSeek Assistant

    I see there's a special character (em dash —). Let me use sed to replace the entire function block:

  23. DeepSeek Assistant

    Now let me use sed to replace lines 68-113 with the new content. Let me first verify the exact line numbers:

  24. DeepSeek Assistant

    Let me use Python to do the replacement more precisely:

  25. DeepSeek Assistant

    Let me see lines 68-73:

  26. DeepSeek Assistant

    Now let me do the replacement using Python:

  27. DeepSeek Assistant

    Now let me verify the change:

  28. DeepSeek Assistant

    The change looks good. Let me now build the project to check if it compiles:

  29. DeepSeek Assistant

    It compiles successfully. Now let me run the directive tests:

  30. DeepSeek Assistant

    All directive tests pass. Let me now run the full test suite for vize_patina:

  31. DeepSeek Assistant

    Let me also run the broader test suite to make sure nothing is broken, and check the no_dupe_v_else_if rule which is a template-phase rule:

  32. DeepSeek Assistant

    Let me create a temporary test to verify the fix works for template-phase diagnostics:

  33. DeepSeek Assistant

    Let me quickly verify my fix handles the template-phase case correctly by checking the lint_template method:

  34. DeepSeek Assistant

    Let me find the linter module.

  35. DeepSeek Assistant

    Let me look at how template-phase rules are run via lint_template:

  36. DeepSeek Assistant

    Let me look at the lint_template_root function:

  37. DeepSeek Assistant

    Let me find run_template_rules:

  38. DeepSeek Assistant

    Let me see that function:

  39. DeepSeek Assistant

    Let me check how the vize_croquis_cf suppression is integrated with template-phase diagnostics:

  40. DeepSeek Assistant

    Let me look at the integration in vize_croquis_cf lib.rs:

  41. DeepSeek Assistant

    Let me check the diagnostics executor that was listed in the initial grep:

  42. DeepSeek Assistant

    Let me check the push_warning function:

  43. DeepSeek Assistant

    Let me look at the push_warning function and surrounding context:

  44. DeepSeek Assistant

    Let me verify the fix more thoroughly by creating a test script:

  45. DeepSeek Assistant

    Let me look at the basic tests to understand test_vize_forget_suppresses_template_v_for:

  46. DeepSeek Assistant

    Let me check if RequireVForKey is a per-element or template-phase rule:

  47. DeepSeek Assistant

    Let me also check the maestro diagnostics corsa.rs to see if template diagnostics there also need suppression:

  48. DeepSeek Assistant

    Let me verify that IfNode has the loc field needed for my code:

  49. DeepSeek Assistant

    Let me find where IfNode is defined:

  50. DeepSeek Assistant

    Let me see the IfNode structure:

  51. DeepSeek Assistant

    Let me check IfBranchNode too:

  52. DeepSeek Assistant

    All tests pass. Let me also run the full test suite for the whole workspace to make sure nothing is broken:

  53. DeepSeek Assistant

    Let me verify the complete modified file looks correct:

  54. DeepSeek Assistant

    Let me see the diff of the changes:

  55. DeepSeek Assistant

    The diff looks clean and correct. Let me also make sure the change doesn't break anything by running the broader test for the vize crate (the main binary):

  56. DeepSeek Assistant

    Let me check if this test failure is related to my change or pre-existing:

  57. DeepSeek Assistant

    The test failure is pre-existing and not related to my change. Let me restore my changes:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.