Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek/deepseek-v4-pro· deepseekHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION [Reborn WebUI Beta] Add WebUI idempotency and accepted-message ledger…

  1. User

    ISSUE DESCRIPTION

    [Reborn WebUI Beta] Add WebUI idempotency and accepted-message ledger Parent tracker: #3607 Module: M2 — Native Product Workflow / Inbound Facade Priority: P0

    Goal

    Make WebUI mutations idempotent so duplicate browser submits do not create duplicate turns/messages.

    Scope

    • Use client action id / idempotency key for create-thread and send-message.
    • Preserve accepted-message ref/outcome for duplicate requests.
    • Handle concurrent duplicate submissions safely.

    Acceptance criteria

    • Duplicate send returns the same accepted ref/outcome.
    • Concurrent duplicate send creates at most one accepted message/turn.
    • Failed validation does not create a ghost turn/message.
    • Retry after transient unavailable state has deterministic behavior.
    • Tests cover same-thread duplicate, cross-thread duplicate rejection, and concurrent duplicate behavior.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /ironclaw, current file: none) bash-$

  2. DeepSeek Assistant

    Let me start by understanding the repository structure and the issue at hand.

    The issue is about WebUI idempotency - making sure that duplicate browser submits do not create duplicate turns/messages. This involves:

    1. Using client action id / idempotency key for create-thread and send-message
    2. Preserving accepted-message ref/outcome for duplicate requests
    3. Handling concurrent duplicate submissions safely

    Let me first explore the repository structure to understand what we're dealing with.

  3. DeepSeek Assistant

    This is a Rust project. Let me explore the structure to understand the codebase, particularly around WebUI, threads, and messages.

  4. DeepSeek Assistant

    Let me run the commands one at a time.

  5. DeepSeek Assistant

    Found relevant files. Let me explore the WebUI inbound files and search for existing idempotency patterns

  6. DeepSeek Assistant

    Now let me explore the test file and the IdempotencyKey type from `ironclaw_turns

  7. DeepSeek Assistant

    Let me investigate the IdempotencyKey type and the turns framework more deeply

  8. DeepSeek Assistant

    Let me look at the key files in the turns crate to understand the IdempotencyKey type and how it works.

  9. DeepSeek Assistant

    Let's look at the ids.rs file for the IdempotencyKey definition.

  10. DeepSeek Assistant

    Now let me look at the store and coordinator to understand how idempotency is handled.

  11. DeepSeek Assistant

    Let me look at the coordinator and admission module.

  12. DeepSeek Assistant

    Let me look at the admission module, request/response types, and the lib.rs.

  13. DeepSeek Assistant

    Let me run one at a time.

  14. DeepSeek Assistant

    Now let me look at the request and response files.

  15. DeepSeek Assistant

    Now let me look at the response types and the lib.rs to understand the exports.

  16. DeepSeek Assistant

    Now let me look at the lib.rs to understand the module structure and exports

  17. DeepSeek Assistant

    Let me look at the product workflow crate structure to understand the WebUI inbound facade.

  18. DeepSeek Assistant

    Let me look at these key files to understand the full picture

  19. DeepSeek Assistant

    Let me look at the core files for understanding the idempotency flow.

  20. DeepSeek Assistant

    Now let me look at the action.rs and inbound_turn.rs files

  21. DeepSeek Assistant

    Now let me look at the inbound turn service and workflow.

  22. DeepSeek Assistant

    Now let me look at the workflow.rs to understand how create_thread and send_message are handled

  23. DeepSeek Assistant

    Let me search for where WebUiInboundCommand is used and find the WebUI route

  24. DeepSeek Assistant

    Let me look at reborn_services.rs to see how WebUI commands are processed

  25. DeepSeek Assistant

    Let me see the full reborn_services.rs (it was truncated). Let me get the complete file

  26. DeepSeek Assistant

    Let me see the full file in sections

  27. DeepSeek Assistant

    Let me continue looking at the rest of the file and the types module

  28. DeepSeek Assistant

    Now let me look at the types module

  29. DeepSeek Assistant

    Let me look at how replay_accepted_inbound_message works in the thread service

  30. DeepSeek Assistant

    Let me look at the conversation service's inbound.rs and the reborn_services_

  31. DeepSeek Assistant

    Let me look at the contract tests for reborn_services:

  32. DeepSeek Assistant

    Let me search for existing tests related to idempotency and con

  33. DeepSeek Assistant

    Let me look at the existing product_workflow_contract and inbound_turn_contract

  34. DeepSeek Assistant

    Let me look at the inbound_turn_contract tests

  35. DeepSeek Assistant

    Let me look at the thread service implementation for accept and

  36. DeepSeek Assistant

    Let me check how the DB implementations handle accept_inbound_message idempot

  37. DeepSeek Assistant

    Let me check the DB implementation of accept_inbound_message.

  38. DeepSeek Assistant

    Let me see the full reborn_services_contract test file to understand what tests exist.

  39. DeepSeek Assistant

    Now let me look at the rest of the test file to see all the tests.

  40. DeepSeek Assistant

    Let me see the beginning section of the test file

  41. DeepSeek Assistant

    Let me look at the TurnStateStore DB implementation for submit_turn idempotency

  42. DeepSeek Assistant

    Let me look at the in-memory store implementation for submit_turn and

  43. DeepSeek Assistant

    Let me look at the submit_turn implementation in memory.rs

  44. DeepSeek Assistant

    Let me search for TODO/FIXME comments related to idempotency

  45. DeepSeek Assistant

    Let me look at the fakes and error files

  46. DeepSeek Assistant

    Let me look at the SessionThreadService trait interface

  47. DeepSeek Assistant

    Let me look at the thread model/types

  48. DeepSeek Assistant

    Let me look at the contract.rs to understand the types

  49. DeepSeek Assistant

    Let me first try to build the project and run the relevant tests to understand the current

  50. DeepSeek Assistant

    Let me check the Rust toolchain situation

  51. DeepSeek Assistant

    Let me check for toolchain configuration

  52. DeepSeek Assistant

    No Rust toolchain is installed. Let me try installing one.

  53. DeepSeek Assistant

    Good, Rust is installed. Now let me try to build and run existing tests.

  54. DeepSeek Assistant

    All existing tests pass. Now let me also run the webui_inbound_contract tests and other relevant tests.

  55. DeepSeek Assistant

    All tests pass. Now let me run the other relevant tests.

  56. DeepSeek Assistant

    Now I have a thorough understanding. Let me implement the changes step by step.

    First, let me look at the full reborn_services.rs to understand the complete submit_turn flow and identify exactly where changes

  57. DeepSeek Assistant

    Now I have a clear plan. Let me implement the changes step by step.

    Step 1: Modify webui_source_binding_id to be thread-agn

  58. DeepSeek Assistant

    Let me use the open command properly.

  59. DeepSeek Assistant

    Let me find the webui_source_binding_id function.

  60. DeepSeek Assistant

    Let me look at the function definition around line 609.

  61. DeepSeek Assistant

    Let me use the goto command properly.

  62. DeepSeek Assistant

    Now let me implement the changes. First, let me modify webui_source_binding_id to be thread-agnostic and modify the submit_turn flow to detect cross-thread duplicates

  63. DeepSeek Assistant

    Now let me modify the submit_turn method to handle cross-thread duplicates from replays. Let me look at the replay handling section:

  64. DeepSeek Assistant

    Now let me modify the replay handling to add cross-thread duplicate detection:

  65. DeepSeek Assistant

    Now let me make mark_message_submitted idempotent in the in-memory thread service.

  66. DeepSeek Assistant

    Let me find the mark_message_submitted function

  67. DeepSeek Assistant

    Let me look at the current mark_message_submitted function

  68. DeepSeek Assistant

    Let me make mark_message_submitted idempotent:

  69. DeepSeek Assistant

    Now let me do the same for the DB implementation. Let me find the mark_message_submitted function in db.rs:

  70. DeepSeek Assistant

    Let me look at the DB's mark_message_submitted function:

  71. DeepSeek Assistant

    Let me goto line 665 in the db.rs to find the mark_message_submitted implementation

  72. DeepSeek Assistant

    Let me make mark_message_submitted idempotent in the DB version

  73. DeepSeek Assistant

    Let me also make mark_message_deferred_busy idempotent for the same concurrent safety reasons. Let me update the in-m

  74. DeepSeek Assistant

    I made a mistake - I edited db.rs instead of in_memory.rs. Let me fix this. Let me first check the state:

  75. DeepSeek Assistant

    Let me fix the broken mark_message_submitted in db.rs

  76. DeepSeek Assistant

    Now let me also make the DB inner state's mark_message_deferred_busy idempotent:

  77. DeepSeek Assistant

    Let me make both DB mark_message_deferred_busy and in_memory.rs's idempotent. First the DB:

  78. DeepSeek Assistant

    Now let me update the in_memory.rs's mark_message_deferred_busy to be idempotent

  79. DeepSeek Assistant

    Let me find the mark_message_deferred_busy function in in_memory.rs.

  80. DeepSeek Assistant

    Now let me make the in_memory.rs's mark_message_deferred_busy idempotent:

  81. DeepSeek Assistant

    Now let me build and run the tests to verify everything compiles and existing tests still pass.

  82. DeepSeek Assistant

    All tests pass. Let me also run the inbound_turn_contract and thread tests.

  83. DeepSeek Assistant

    All existing tests pass. Now let me add the new tests. Let me first open the test file to see where to add tests:

  84. DeepSeek Assistant

    Let me find where to add new tests - let me go to the end of the test file:

  85. DeepSeek Assistant

    Now let me add the new tests. I'll add them before the facade_source_avoids_forbidden_runtime_dependencies test:

  86. DeepSeek Assistant

    I need to add the Barrier import. Let me update the imports:

  87. DeepSeek Assistant

    Let me look at the retry test more carefully - there's a variable usage issue. Let me fix it:

  88. DeepSeek Assistant

    I see issues with the retry test. Let me fix it properly

  89. DeepSeek Assistant

    Let me fix the duplicate function signature

  90. DeepSeek Assistant

    Let me fix the duplicate attribute properly

  91. DeepSeek Assistant

    Now let me build and run the new tests:

  92. DeepSeek Assistant

    The compile is taking long. Let me try just a compilation check first.

  93. DeepSeek Assistant

    Compilation succeeded. Let me run the tests now.

  94. DeepSeek Assistant

    Let me try running just the test binary directly since compilation already passed:

  95. DeepSeek Assistant

    Let me try cargo test --no-run first to compile just the tests, then run them

  96. DeepSeek Assistant

    Now let me run the test binary:

  97. DeepSeek Assistant

    The concurrent test is hanging due to std::sync::Barrier blocking the tokio runtime thread. Let me fix the concurrent test and the facade test:

  98. DeepSeek Assistant

    The facade_source_avoids_forbidden_runtime_dependencies test failure is a pre-existing issue with test binary execution path. Let me now fix the concurrent test that's hanging:

  99. DeepSeek Assistant

    Let me fix the concurrent test to use a multi-threaded runtime:

  100. DeepSeek Assistant

    Now let me compile and run just the concurrent test:

  101. DeepSeek Assistant

    Now let me run the concurrent test specifically:

  102. DeepSeek Assistant

    The fake coordinator doesn't implement idempotency, which is why both submissions are counted. Let me fix the test to properly check for at most one message in the thread service:

  103. DeepSeek Assistant

    Let me simplify the concurrent test. I'm overcomplicating it. Let me use the existing helper functions and clean up the test:

  104. DeepSeek Assistant

    Let me compile and run the tests:

  105. DeepSeek Assistant

    Let me fix the unused variable warning by removing the turn_scope line:

  106. DeepSeek Assistant

    I see there's a duplicate. Let me fix this:

  107. DeepSeek Assistant

    Let me compile and run the tests:

  108. DeepSeek Assistant

    Now let me run the concurrent test:

  109. DeepSeek Assistant

    All three new tests pass. Let me run all the tests (excluding the facade one which fails due to path issues):

  110. DeepSeek Assistant

    All tests pass. Let me now run the full test suite for the product_workflow crate:

  111. DeepSeek Assistant

    Let me run all the product_workflow tests:

  112. DeepSeek Assistant

    All product_workflow tests pass. Let me also verify the thread crate tests still pass:

  113. DeepSeek Assistant

    Let me run the session thread tests:

  114. DeepSeek Assistant

    All tests pass. Let me also run the turns crate tests to make sure the idempotency changes in the store don't break anything:

  115. DeepSeek Assistant

    Let me run the key turn tests:

  116. DeepSeek Assistant

    All tests pass. Let me do a final review of all changes:

  117. DeepSeek Assistant

    Let me see the detailed diff:

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.