Skip to content
TheChatArchiveThe Chat Archive
DeepSeekdeepseek/deepseek-v4-pro· deepseekHugging Face ibragim-bad/swe_rebench_07_2026_trajectories

ISSUE DESCRIPTION fix(installer): back navigation from Pi-only install shows unrelated…

  1. User

    ISSUE DESCRIPTION

    fix(installer): back navigation from Pi-only install shows unrelated Gentle AI configuration

    Pre-flight Checklist

    • I have searched existing issues and this is not a duplicate
    • I understand that PRs will be rejected if the linked issue does not have status:approved

    📝 Bug Description

    When running the gentle-pi installer from gentle-ai, if I select only Pi as the installation target and then use Back on the next step,
    the installer returns to an unexpected configuration flow.

    Instead of going back to the previous installation target selection, it shows configuration options that do not correspond to the selected
    Pi-only path, such as TDD configuration, multi-agent installation, communication style, and related Gentle AI setup options.

    🔄 Steps to Reproduce

    1. Start the gentle-ai installer.
      2. Select only Pi as the installation target.
      3. Continue to the next step.
      4. Select Back.
      5. Observe that the installer shows configuration screens for TDD, multi-agent setup, speaking style, etc.

    ✅ Expected Behavior

    After selecting Back, the installer should return to the previous relevant step in the Pi-only installation flow, likely the installation
    target selection screen.

    ❌ Actual Behavior

    The installer jumps to unrelated Gentle AI configuration screens, including TDD setup, multi-agent installation, communication style, and other
    options that were not expected after choosing a Pi-only installation.

    Gentle AI Version

    v 1.30.5

    Operating System

    macOS

    AI Agent / Client

    Other

    📋 Affected Area

    CLI (commands, flags)

    💡 Logs / Error Output

    No logs available. This appears to be an installer navigation/state-flow issue.
    

    Additional Context

    This happens specifically when selecting only Pi during installation and then navigating back from the following step.

    ADDITIONAL ADVICE

    Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use git checkout <file> to restore the file to its original state. You can also reset all changes in the repository using git reset --hard command. Additionally, you can use git stash and git stash pop to temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you call submit) using git status or git diff commands. However you don't need to use git add or git commit before submitting your changes. In fact, submit only submits currently unstaged changes because it uses git diff to get the changes that need to be submitted.

    CHECKLIST

    Before submitting your solution, please go over the following checklist and make sure you've done everything:

    • If an error was reported in the issue description, I have successfully reproduced it.
    • If an error was reported in the issue description, I have confirmed that my fix resolves the error.
    • I have thought about edge cases and made sure my fix handles them as well.
    • I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.

    Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!

    (Current directory: /gentle-ai, current file: none) bash-$

  2. DeepSeek Assistant

    Let me start by exploring the repository structure to understand the codebase and then find the relevant installer code that handles the Pi-only installation back navigation issue.

  3. DeepSeek Assistant

    The find command seems to not have produced output. Let me try a different approach.

  4. DeepSeek Assistant

    This is a Go project. Let me explore the structure further, especially the cmd and internal directories

  5. DeepSeek Assistant

    Let me look at the key files related to the installer flow and navigation.

  6. DeepSeek Assistant

    The issue is with my tool call format. Let me fix it.

  7. DeepSeek Assistant

    Let me look at the model and the agents screen to understand the flow.

  8. DeepSeek Assistant

    Let me look at the agents screen and the preset screen to understand the flow logic:

  9. DeepSeek Assistant

    Let me run these one at a time.

  10. DeepSeek Assistant

    Now let me look at the preset.go screen and persona.go to understand the flow.

  11. DeepSeek Assistant

    Let me look at the model.go file more carefully, focusing on the Update function and screen

  12. DeepSeek Assistant

    Let me look at the specific sections of model.go around those lines

  13. DeepSeek Assistant

    Let me find the isPiOnlyAgents and piOnlyComponents functions

  14. DeepSeek Assistant

    Let me look at the screen transition logic and the Pi-only functions

  15. DeepSeek Assistant

    Let me look at the goBack function in model.go

  16. DeepSeek Assistant

    Let me look at the goBack function

  17. DeepSeek Assistant

    Let me continue reading the goBack function.

  18. DeepSeek Assistant

    Let me continue reading the goBack function to see the remaining logic.

  19. DeepSeek Assistant

    Let me look at the piOnlyComponents and shouldShow functions

  20. DeepSeek Assistant

    Let me look at the shouldShow functions

  21. DeepSeek Assistant

    Let me look at these shouldShow functions.

  22. DeepSeek Assistant

    Let me look at how the back/escape key is handled for ScreenDependencyTree

  23. DeepSeek Assistant

    Let me look at the key handling for back navigation more broadly

  24. DeepSeek Assistant

    Let me look at the confirmSelection function as well to see all the navigation logic.

  25. DeepSeek Assistant

    Let me confirm the full goBack function doesn't have Pi-only handling

  26. DeepSeek Assistant

    Now I have a clear understanding of the issue. Let me look at the exact area in goBack where the DependencyTree back navigation is handled and create

  27. DeepSeek Assistant

    Let me also check the "enter" key handling for the dependency tree screen, specifically how the "Back" button works:

  28. DeepSeek Assistant

    Let me find where ScreenDependencyTree is handled in the confirmSelection or enter key logic:

  29. DeepSeek Assistant

    Let me look at line 1758 for the DependencyTree "enter" handler.

  30. DeepSeek Assistant

    Let me continue reading the back logic in confirmSelection

  31. DeepSeek Assistant

    Now I have a clear understanding of the bug. Let me create a temporary test script to confirm the behavior and then fix it.

    The issue is in two places:

    1. goBack() - when pressing Escape on ScreenDependencyTree
    2. confirmSelection() - when pressing Enter on "Back" button on ScreenDependencyTree

    Both should navigate back to ScreenAgents when Pi is the only selected agent, instead of ScreenPreset.

    Let me first look at the existing tests to understand the patterns:

  32. DeepSeek Assistant

    Let me look at the model_test.go for any existing Pi-only tests:

  33. DeepSeek Assistant

    Let me look at the existing Pi-only tests:

  34. DeepSeek Assistant

    Now I understand the issue completely. Let me implement the fix. The bug is in two places:

    1. goBack() function - pressing Escape on ScreenDependencyTree navigates to ScreenPreset instead of ScreenAgents for Pi-only
    2. confirmSelection() function - pressing Enter on "Back" button on ScreenDependencyTree navigates to ScreenPreset instead of ScreenAgents for Pi-only

    Let me fix both:

    Fix 1: goBack() - add Pi-only check after the DependencyTree back handling block

  35. DeepSeek Assistant

    Let me fix that:

  36. DeepSeek Assistant

    Now let me apply the first fix in goBack(). I'll add Pi-only check after the ClaudeModelPicker check

  37. DeepSeek Assistant

    The file was opened automatically. Let me use goto to go to line 2446 and then apply the edit.

  38. DeepSeek Assistant

    Now let me apply the first fix in goBack()

  39. DeepSeek Assistant

    Now let me fix the second place in confirmSelection(). Let me find the exact lines.

  40. DeepSeek Assistant

    Now let me apply the second fix in confirmSelection()

  41. DeepSeek Assistant

    Both fixes are applied. Now let me run the existing tests to make sure the changes work correctly.

  42. DeepSeek Assistant

    Let me check the Go environment

  43. DeepSeek Assistant

    Let me set up the Go module cache

  44. DeepSeek Assistant

    Good. Now let me run the Pi-only tests:

  45. DeepSeek Assistant

    Let me set up the remaining Go environment variables

  46. DeepSeek Assistant

    All Pi-related tests pass. Let me now run the full test suite to make sure nothing is broken.

  47. DeepSeek Assistant

    Let me check the full test output summary:

  48. DeepSeek Assistant

    All tests pass. Let me also run the broader test suite to be safe

  49. DeepSeek Assistant

    Let me run just the most relevant tests - the TUI package which we already confirmed passes. Let me also run the CLI tests:

  50. DeepSeek Assistant

    All tests pass. Let me verify the changes I made by checking the diff:

  51. DeepSeek Assistant

    The changes look correct and minimal. Let me verify the logic once more:

    For goBack() (Escape key):

    • Pi-only on DependencyTree → falls through shouldShowOpenCodePluginsScreen, shouldShowStrictTDDScreen, shouldShowClaudeModelPickerScreen (all false for Pi-only) → hits new isPiOnlyAgents check → returns to ScreenAgents ✓

    For confirmSelection() (Enter on Back button):

    • Same chain → hits new isPiOnlyAgents check → returns to ScreenAgents ✓

    Edge cases:

    • Pi + other agents: isPiOnlyAgents returns false, normal flow preserved ✓
    • Normal multi-agent flow: isPiOnlyAgents returns false, normal flow preserved ✓

    Let me also verify there are no compilation errors by building the package

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.