Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0613· openaiHugging Face Suzhen/CodeChat

parse this json "{"wallets":[]}" using unreal engine parser c++

  1. User

    parse this json "{"wallets":[]}" using unreal engine parser c++

  2. Assistant

    To parse the given JSON using Unreal Engine's JSON parser in C++, you can follow these steps:

    1. Include the necessary header files:
    #include "Json.h"
    #include "JsonReader.h"
    
    1. Add the following code snippet to parse the JSON:
    FString JsonString = TEXT("{\"wallets\":[]}");
    
    TSharedPtr<FJsonObject> JsonObject;
    TSharedRef<TJsonReader<TCHAR>> JsonReader = TJsonReaderFactory<TCHAR>::Create(JsonString);
    
    if (FJsonSerializer::Deserialize(JsonReader, JsonObject))
    {
        TArray<TSharedPtr<FJsonValue>> WalletsArray = JsonObject->GetArrayField("wallets");
    
        for (const TSharedPtr<FJsonValue>& WalletValue : WalletsArray)
        {
            // Perform operations on each wallet object
            TSharedPtr<FJsonObject> WalletObject = WalletValue->AsObject;
            //...
        }
    }
    else
    {
        UE_LOG(LogTemp, Error, TEXT("Failed to deserialize JSON."));
    }
    

    Make sure to replace \"{\"wallets\":[]}\" with your actual JSON string.

    This code snippet first reads the JSON string JsonString and creates a TJsonReader using TJsonReaderFactory. Then, it attempts to deserialize the JSON using FJsonSerializer::Deserialize into a TSharedPtr<FJsonObject>, JsonObject.

    If the JSON is successfully deserialized, it gets the array "wallets" using JsonObject->GetArrayField("wallets"). You can then iterate over the array and perform required operations on each wallet object.

    Note: Ensure that you have added the required Unreal Engine JSON module in your *.Build.cs file by including Json in the dependencies section.

  3. User

    then parse this json "{"response":"{"status":200,"message":"ok","wallets":[]}"}"

  4. Assistant

    To parse the given JSON using Unreal Engine's JSON parser in C++, you can follow these steps:

    1. Include the necessary header files:
    #include "Json.h"
    #include "JsonReader.h"
    
    1. Add the following code snippet to parse the JSON:
    FString JsonString = TEXT("{\"response\":\"{\\\"status\\\":200,\\\"message\\\":\\\"ok\\\",\\\"wallets\\\":[]}\"}");
    
    TSharedPtr<FJsonObject> OuterJsonObject;
    TSharedPtr<FJsonObject> InnerJsonObject;
    TSharedRef<TJsonReader<TCHAR>> JsonReader = TJsonReaderFactory<TCHAR>::Create(JsonString);
    
    if (FJsonSerializer::Deserialize(JsonReader, OuterJsonObject))
    {
        FString ResponseJsonString;
        if (OuterJsonObject->TryGetStringField("response", ResponseJsonString))
        {
            TSharedRef<TJsonReader<TCHAR>> InnerJsonReader = TJsonReaderFactory<TCHAR>::Create(ResponseJsonString);
    
            if (FJsonSerializer::Deserialize(InnerJsonReader, InnerJsonObject))
            {
                TArray<TSharedPtr<FJsonValue>> WalletsArray = InnerJsonObject->GetArrayField("wallets");
    
                for (const TSharedPtr<FJsonValue>& WalletValue : WalletsArray)
                {
                    // Perform operations on each wallet object
                    TSharedPtr<FJsonObject> WalletObject = WalletValue->AsObject;
                    //...
                }
            }
            else
            {
                UE_LOG(LogTemp, Error, TEXT("Failed to deserialize inner JSON."));
            }
        }
        else
        {
            UE_LOG(LogTemp, Error, TEXT("Failed to get response JSON string."));
        }
    }
    else
    {
        UE_LOG(LogTemp, Error, TEXT("Failed to deserialize outer JSON."));
    }
    

    Make sure to replace \"{\"response\":\"{\\\"status\\\":200,\\\"message\\\":\\\"ok\\\",\\\"wallets\\\":[]}\"} with your actual JSON string.

    This code snippet first reads the outer JSON string JsonString and creates a TJsonReader using TJsonReaderFactory. Then, it attempts to deserialize the outer JSON using FJsonSerializer::Deserialize into a TSharedPtr<FJsonObject>, OuterJsonObject.

    If the outer JSON is successfully deserialized, it tries to extract the inner JSON string "response" using OuterJsonObject->TryGetStringField("response", ResponseJsonString).

    Once it has the inner JSON string, it creates another TJsonReader for the inner JSON and attempts to deserialize it using FJsonSerializer::Deserialize into a TSharedPtr<FJsonObject>, InnerJsonObject.

    If the inner JSON is successfully deserialized, it gets the array "wallets" using InnerJsonObject->GetArrayField("wallets"). You can then iterate over the array and perform required operations on each wallet object.

    Note: Ensure that you have added the required Unreal Engine JSON module in your *.Build.cs file by including Json in the dependencies section.

  5. User

    find an issue in this code

    FString JsonString(json.c_str());
    TSharedPtr<FJsonObject> JsonObject;
    TSharedPtr<FJsonObject> ResponseJsonObject;
    TSharedRef<TJsonReader<TCHAR>> JsonReader = TJsonReaderFactory<TCHAR>::Create(JsonString);
    
    if (FJsonSerializer::Deserialize(JsonReader, JsonObject))
    {
        FString ResponseJsonString;
        if (JsonObject->TryGetStringField("response", ResponseJsonString))
        {
            TSharedRef<TJsonReader<TCHAR>> ResponseJsonReader = TJsonReaderFactory<TCHAR>::Create(ResponseJsonString);
    
            if (FJsonSerializer::Deserialize(ResponseJsonReader, ResponseJsonObject))
            {
                TArray<TSharedPtr<FJsonValue>> WalletsJsonArray = ResponseJsonObject->GetArrayField("wallets");
                for (const TSharedPtr<FJsonValue>& WalletJson : WalletsJsonArray) {
                    TSharedPtr<FJsonObject> WalletJsonObject = WalletJson->AsObject();
    
                    std::string WalletAddress = std::string(TCHAR_TO_UTF8(*WalletJsonObject->GetStringField("address")));
                    RGNWallet Wallet(WalletAddress);
                    wallets.push_back(Wallet);
                }
            }
        }
    }
    
  6. Assistant

    The issue with the given code is that it does not handle the scenario where the outer JSON object or inner JSON object fail to deserialize. If these deserialization operations fail, the code will still continue executing which could lead to unexpected behavior or crashes.

    To fix this issue, you can use conditional statements to check if the deserialization is successful before accessing the parsed JSON objects. Here's an updated version of the code with error handling included:

    FString JsonString(json.c_str());
    TSharedPtr<FJsonObject> JsonObject;
    TSharedPtr<FJsonObject> ResponseJsonObject;
    TSharedRef<TJsonReader<TCHAR>> JsonReader = TJsonReaderFactory<TCHAR>::Create(JsonString);
    
    if (FJsonSerializer::Deserialize(JsonReader, JsonObject))
    {
        FString ResponseJsonString;
        if (JsonObject->TryGetStringField("response", ResponseJsonString))
        {
            TSharedRef<TJsonReader<TCHAR>> ResponseJsonReader = TJsonReaderFactory<TCHAR>::Create(ResponseJsonString);
    
            if (FJsonSerializer::Deserialize(ResponseJsonReader, ResponseJsonObject))
            {
                TArray<TSharedPtr<FJsonValue>> WalletsJsonArray;
                if (ResponseJsonObject->TryGetArrayField("wallets", WalletsJsonArray))
                {
                    for (const TSharedPtr<FJsonValue>& WalletJson : WalletsJsonArray) {
                        TSharedPtr<FJsonObject> WalletJsonObject = WalletJson->AsObject();
    
                        FString WalletAddress;
                        if (WalletJsonObject->TryGetStringField("address", WalletAddress))
                        {
                            std::string WalletAddressStr = std::string(TCHAR_TO_UTF8(*WalletAddress));
                            RGNWallet Wallet(WalletAddressStr);
                            wallets.push_back(Wallet);
                        }
                    }
                }
                else
                {
                    UE_LOG(LogTemp, Error, TEXT("Failed to get wallets JSON array."));
                }
            }
            else
            {
                UE_LOG(LogTemp, Error, TEXT("Failed to deserialize response JSON."));
            }
        }
        else
        {
            UE_LOG(LogTemp, Error, TEXT("Failed to get response JSON string."));
        }
    }
    else
    {
        UE_LOG(LogTemp, Error, TEXT("Failed to deserialize JSON."));
    }
    

    In the updated code, there are additional conditional statements (TryGetArrayField and TryGetStringField) to handle potential deserialization failures. If any of these conditions fail, an appropriate error message is logged.

    Note: Make sure to include the necessary header files and have the required Unreal Engine JSON module added to your *.Build.cs file.

  7. User

    i am getting an error "TArray<TSharedPtr<FJsonValue, ESPMode::ThreadSafe>, FDefaultAllocator>"

  8. Assistant

    The error you're encountering suggests a mismatch between the expected and actual data types. The TArray<TSharedPtr<FJsonValue, ESPMode::ThreadSafe>, FDefaultAllocator> error likely means that the JSON array field "wallets" is being treated as an incorrect data type.

    To resolve this issue, you can update the code to explicitly convert the JSON array to TArray<TSharedPtr<FJsonValue>>, like this:

    FString JsonString(json.c_str());
    TSharedPtr<FJsonObject> JsonObject;
    TSharedPtr<FJsonObject> ResponseJsonObject;
    TSharedRef<TJsonReader<TCHAR>> JsonReader = TJsonReaderFactory<TCHAR>::Create(JsonString);
    
    if (FJsonSerializer::Deserialize(JsonReader, JsonObject))
    {
        FString ResponseJsonString;
        if (JsonObject->TryGetStringField("response", ResponseJsonString))
        {
            TSharedRef<TJsonReader<TCHAR>> ResponseJsonReader = TJsonReaderFactory<TCHAR>::Create(ResponseJsonString);
    
            if (FJsonSerializer::Deserialize(ResponseJsonReader, ResponseJsonObject))
            {
                TArray<TSharedPtr<FJsonValue>> WalletsJsonArray;
                if (ResponseJsonObject->TryGetArrayField("wallets", WalletsJsonArray))
                {
                    for (const TSharedPtr<FJsonValue>& WalletJson : WalletsJsonArray) {
                        TSharedPtr<FJsonObject> WalletJsonObject = WalletJson->AsObject();
    
                        FString WalletAddress;
                        if (WalletJsonObject->TryGetStringField("address", WalletAddress))
                        {
                            std::string WalletAddressStr = TCHAR_TO_UTF8(*WalletAddress);
                            RGNWallet Wallet(WalletAddressStr);
                            wallets.push_back(Wallet);
                        }
                    }
                }
                else
                {
                    UE_LOG(LogTemp, Error, TEXT("Failed to get wallets JSON array."));
                }
            }
            else
            {
                UE_LOG(LogTemp, Error, TEXT("Failed to deserialize response JSON."));
            }
        }
        else
        {
            UE_LOG(LogTemp, Error, TEXT("Failed to get response JSON string."));
        }
    }
    else
    {
        UE_LOG(LogTemp, Error, TEXT("Failed to deserialize JSON."));
    }
    

    In this modified code, the WalletsJsonArray variable is explicitly declared as TArray<TSharedPtr<FJsonValue>> to align the expected data type. Ensure that you have the necessary include statements for the Json.h and JsonReader.h header files.

    Also, remember to add the Unreal Engine JSON module to your *.Build.cs file by including 'Json' in the dependencies section.

    By making these updates, the error should be resolved, and you should be able to parse the JSON successfully.

  9. User

    Severity Code Description Project File Line Suppression State Error C2664 'bool FJsonObject::TryGetArrayField(const FString &,const TArray<TSharedPtr<FJsonValue,ESPMode::ThreadSafe>,FDefaultAllocator> *&) const': cannot convert argument 2 from 'TArray<TSharedPtr<FJsonValue,ESPMode::ThreadSafe>,FDefaultAllocator>' to 'const TArray<TSharedPtr<FJsonValue,ESPMode::ThreadSafe>,FDefaultAllocator> *&' rgn_unreal C:\Users\car3m\Work\ReadyMakers\Projects\rgn_unreal\Plugins\ReadyGamesNetwork\Source\ReadyGamesNetwork\Private\RGNGetUserWalletsResponse.cpp 35

  10. Assistant

    It looks like there is an issue with passing the second argument in the TryGetArrayField function. The error indicates that the argument is being passed incorrectly. To resolve this error, you can update the code as follows:

    FString JsonString(json.c_str());
    TSharedPtr<FJsonObject> JsonObject;
    TSharedPtr<FJsonObject> ResponseJsonObject;
    TSharedRef<TJsonReader<TCHAR>> JsonReader = TJsonReaderFactory<TCHAR>::Create(JsonString);
    
    if (FJsonSerializer::Deserialize(JsonReader, JsonObject))
    {
        FString ResponseJsonString;
        if (JsonObject->TryGetStringField("response", ResponseJsonString))
        {
            TSharedRef<TJsonReader<TCHAR>> ResponseJsonReader = TJsonReaderFactory<TCHAR>::Create(ResponseJsonString);
    
            if (FJsonSerializer::Deserialize(ResponseJsonReader, ResponseJsonObject))
            {
                const TArray<TSharedPtr<FJsonValue>>* WalletsJsonArray;
                if (ResponseJsonObject->TryGetArrayField("wallets", WalletsJsonArray))
                {
                    for (const TSharedPtr<FJsonValue>& WalletJson : *WalletsJsonArray) {
                        TSharedPtr<FJsonObject> WalletJsonObject = WalletJson->AsObject();
    
                        FString WalletAddress;
                        if (WalletJsonObject->TryGetStringField("address", WalletAddress))
                        {
                            std::string WalletAddressStr = TCHAR_TO_UTF8(*WalletAddress);
                            RGNWallet Wallet(WalletAddressStr);
                            wallets.push_back(Wallet);
                        }
                    }
                }
                else
                {
                    UE_LOG(LogTemp, Error, TEXT("Failed to get wallets JSON array."));
                }
            }
            else
            {
                UE_LOG(LogTemp, Error, TEXT("Failed to deserialize response JSON."));
            }
        }
        else
        {
            UE_LOG(LogTemp, Error, TEXT("Failed to get response JSON string."));
        }
    }
    else
    {
        UE_LOG(LogTemp, Error, TEXT("Failed to deserialize JSON."));
    }
    

    In the updated code, the WalletsJsonArray variable is declared as a constant pointer to an array of shared pointers of type FJsonValue. You can dereference this pointer (*WalletsJsonArray) to access the actual array when iterating over it.

    Please ensure that you have included the necessary headers (Json.h and JsonReader.h) and added the Unreal Engine JSON module to your *.Build.cs file.

    Once you make these updates, the error should be resolved, and you should be able to parse the JSON successfully.

  11. User

    find an issue in this code std::string responseBody = response.getResponseBody(); int responseCode = response.getResponseCode();

            UE_LOG(LogReadyGamesNetwork, Log, TEXT("%s"), UTF8_TO_TCHAR(responseBody.c_str()));
            UE_LOG(LogReadyGamesNetwork, Log, TEXT("%s"), responseCode);
    
  12. Assistant

    The issue in the given code is with the second UE_LOG statement where the responseCode is being logged. The responseCode is an integer, but it is being passed as-is to UE_LOG, which expects a const TCHAR* string as the argument.

    To fix this issue, you need to convert the integer responseCode to a FString, and then pass it to the UE_LOG statement. Here's the updated code:

    std::string responseBody = response.getResponseBody();
    int responseCode = response.getResponseCode();
    
    UE_LOG(LogReadyGamesNetwork, Log, TEXT("%s"), UTF8_TO_TCHAR(responseBody.c_str()));
    UE_LOG(LogReadyGamesNetwork, Log, TEXT("%d"), responseCode);
    

    In the updated code, the integer responseCode is now passed to UE_LOG using the %d format specifier, which represents an integer value.

    If you want to convert the integer responseCode to FString before logging, you can do it like this:

    std::string responseBody = response.getResponseBody();
    int responseCode = response.getResponseCode();
    
    UE_LOG(LogReadyGamesNetwork, Log, TEXT("%s"), UTF8_TO_TCHAR(responseBody.c_str()));
    UE_LOG(LogReadyGamesNetwork, Log, TEXT("%s"), FString::FromInt(responseCode));
    

    In this version, FString::FromInt is used to convert the integer responseCode to an FString before passing it to UE_LOG.

    Make sure you have the necessary headers included and the logging channel (LogReadyGamesNetwork) is properly defined in your code.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.