Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· openaiHugging Face Suzhen/CodeChat

链接脚本为 ENTRY(main) MEMORY { RAM (rwx) : ORIGIN = 0x00000000, LENGTH = 0x0000a000 }…

  1. User

    链接脚本为 ENTRY(main)

    MEMORY { RAM (rwx) : ORIGIN = 0x00000000, LENGTH = 0x0000a000 }

    stack_start = ORIGIN(RAM) + LENGTH(RAM) - 0x1000; heap_start = ORIGIN(RAM) + 0x2000;

    SECTIONS {

    .text : {
        *(.text)
    } > RAM
    
    .data : {
        *(.data)
    } > RAM
    
    .bss : {
    *(.bss)
    } > RAM
    
    .stack : {
        stack_start = .;
    } > RAM
    
    .heap : {
        heap_start = .;
    } > RAM
    

    }
    C语言程序为 #include <stdio.h> #include <stdlib.h>

    extern unsigned int stack_start; extern unsigned int heap_start;

    int main() { int a = 100; int *ptr = &a; int p = (int)malloc(sizeof(int)); *p = 200;

    printf("stack start address: %x\n", stack_start);
    printf("value at stack start address: %x\n", (unsigned int)(*(&stack_start)));
    printf("value at ptr: %d\n", *ptr);
    
    printf("heap start address: 0x%x\n", heap_start);
    printf("value at heap start address: %x\n", *p);
    
    free(p);
    return 0;
    

    } 在gcc main.c -c main.o之后执行,ld main.o -o app -T link.ld -L /lib/x86_64-linux-gnu/ -lc -dynamic-linker /lib64/ld-linux-x86-64.so.2 报错PHDR segment not covered by LOAD segment,如何解决

  2. Assistant

    这个错误通常是由于链接脚本中的内存段定义与实际的程序段不匹配所导致的。可能需要检查链接脚本中内存段的起始位置和大小是否正确,以及程序中所有段定义是否正确。

    另外,也可以尝试使用GNU ld的-v选项来输出详细的链接过程信息,以便更好地确定问题所在。例如,使用以下命令:

    ld main.o -o app -T link.ld -L /lib/x86_64-linux-gnu/ -lc -dynamic-linker /lib64/ld-linux-x86-64.so.2 -v

    这将输出GNU ld的详细信息,包括链接脚本和所有程序段的加载地址和大小。可以使用这些信息来诊断错误,并进行必要的调整。

  3. User

    在linux系统中,以上链接文件中的段应该如何定义

  4. Assistant

    在Linux系统中,链接文件中的段可以按照以下方式定义:

    ENTRY(main)
    
    MEMORY {
        RAM (rwx) : ORIGIN = 0x00000000, LENGTH = 0x0000a000
    }
    
    stack_start = ORIGIN(RAM) + LENGTH(RAM) - 0x1000;
    heap_start = ORIGIN(RAM) + 0x2000;
    
    SECTIONS {
        . = ORIGIN(RAM);
        .text : { *(.text) } > RAM
        .data : { *(.data) } > RAM
        .bss  : { *(.bss)  } > RAM
    
        . = stack_start;
        .stack : {
            *(.stack)
        } > RAM
    
        . = heap_start;
        .heap : {
            *(.heap)
        } > RAM
        _end = .;
    }
    

    上述链接脚本中,定义了一块长度为0x0000a000的可读写可执行内存RAM,并且定义了栈和堆的起始地址stack_start和heap_start。在SECTIONS段中,按照内存地址顺序定义了三个段:.text、.data和.bss,这些段被放置在RAM内存之中。紧接着,把当前位置设置为stack_start,定义了.stack段;设置为heap_start,定义了.heap段。最后定义了_end为当前位置,即RAM的末尾地址。

    需要注意的是,在链接脚本中定义的内存段要与实际系统的内存布局相一致。这意味着需要根据具体的系统环境和应用程序的需求来确定内存段的大小和位置,以充分利用系统资源。

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.