Skip to content
TheChatArchiveThe Chat Archive
gpt-4-0314· openaiHugging Face Suzhen/CodeChat

在openmv中已对小车进行了模块化初始化,代码如下import time from pyb import UART from pyb import Servo def…

  1. User

    在openmv中已对小车进行了模块化初始化,代码如下import time from pyb import UART from pyb import Servo

    def sendcommand(buffer10): uart=UART(3,115200) for i in range(0,10): uart.writechar(buffer10[i]) time.sleep_us(1)

    def initbuffer(): frame_head1=0xFA frame_head2=0xAF machine_id=0x00 command_id=0x04 commandone_high=0x00 commandone_low=0x00 commandtwo_high=0x00 commandtwo_low=0x00 examine=machine_id+command_id+commandone_high+commandone_low+commandtwo_high+commandtwo_low frame_end=0xED buffer10=[frame_head1,frame_head2,machine_id,command_id,commandone_high,commandone_low,commandtwo_high,commandtwo_low,examine,frame_end] return buffer10

    def opentheled(_id): machine_id=_id command_id=0x04 commandone_high=0x00 commandone_low=0x00 commandtwo_high=0x00 commandtwo_low=0x00 examine=machine_id+command_id+commandone_high+commandone_low+commandtwo_high+commandtwo_low buffer10=[250,0xAF,machine_id,command_id,commandone_high,commandone_low,commandtwo_high,commandtwo_low,examine,0xED] return buffer10

    def closetheled(_id): machine_id=_id command_id=0x04 commandone_high=0x01 commandone_low=0x00 commandtwo_high=0x00 commandtwo_low=0x00 examine=machine_id+command_id+commandone_high+commandone_low+commandtwo_high+commandtwo_low buffer10=[0xFA,0xAF,machine_id,command_id,commandone_high,commandone_low,commandtwo_high,commandtwo_low,examine,0xED] return buffer10

    def motor_rotate(_id,direcation,speed): machine_id=_id command_id=0x01 if direcation=="front": commandone_high=0xFD elif direcation=="back": commandone_high=0xFE commandone_low=0x00 commandtwo_high=0x00 commandtwo_low=speed examine=machine_id+command_id+commandone_high+commandone_low+commandtwo_high+commandtwo_low buffer10=[0xFA,0xAF,machine_id,command_id,commandone_high,commandone_low,commandtwo_high,commandtwo_low,examine,0xED] return buffer10

    def getspeed(_id): bool1="false" uart=UART(3,115200) examine=_id+0x02 temp_buf=[0xFA,0xAF,_id,0x02,0x00,0x00,0x00,0x00,examine,0xED] for i in range(0,75): sendcommand(temp_buf) str1=uart.readline() if str1!=None and bool1=="True": print(str1) elif str1!=None: bool1="True" time.sleep_ms(1)

    def moveforward(_speed): buf=motor_rotate(_id=1,direcation="front",speed=_speed) for i in range(0,75): sendcommand(buf) time.sleep_ms(10) buf=motor_rotate(_id=2,direcation="back",speed=_speed) for i in range(0,75): sendcommand(buf)

    def moveback(_speed): buf=motor_rotate(_id=1,direcation="back",speed=_speed) for i in range(0,75): sendcommand(buf) time.sleep_ms(10) buf=motor_rotate(_id=2,direcation="front",speed=_speed) for i in range(0,75): sendcommand(buf)

    def stop(): moveforward(_speed=0) s1 = Servo(1) s1.angle(0,0) 如何进行进一步的实现小车沿着目标线行驶(给出完整代码)

  2. Assistant

    为了让小车沿着目标线行驶,你需要使用一个感知器或者一个算法来检测目标线的位置,然后根据检测到的位置调整小车的转向。这里我给一个简化的例子使用OpenMV自带的Line Tracking Sensor。请注意这里仅仅是一个例子,你需要根据实际使用的硬件和感知器进行调整。

    首先,我们在代码中导入所需的库,并在主循环中获取检测到的线条数据。

    import sensor, image, time
    from pyb import UART
    from pyb import Servo
    
    # 初始化摄像头
    sensor.reset()
    sensor.set_pixformat(sensor.RGB565)
    sensor.set_framesize(sensor.QQVGA)
    sensor.skip_frames(time = 2000)
    
    # 设置摄像头参数,这里用一个简单的颜色阈值来检测黑色的线条
    threshold = (0, 95)
    sensor.set_auto_gain(False)
    sensor.set_auto_whitebal(False)
    
    # 主循环
    while(True):
        img = sensor.snapshot().binary([threshold])
    
        # 获取检测到的线条
        lines = img.get_regression([(255, 255)], robust=True)
        
        # 获取线条的位置信息,并根据位置调整小车的转向
        if lines:
            # 这里的位置信息表示线条偏离图像中心的程度,你可以根据实际情况调整此值
            error = lines.x2() - 80
            
            # 根据error值调整小车的转向,这里简单地使用一个线性映射,可以根据需要调整
            steering_angle = int(error * 45 / 80)
            
            # 更新小车的转向
            update_steering(steering_angle)
            
            # 让小车向前行驶
            moveforward(_speed=50)
        else:
            # 如果没有检测到线条,让小车停止
            stop()
    

    接下来,我们需要定义一个函数update_steering()来根据计算得到的转向角度更新小车的转向。

    def update_steering(angle):
        # 使用伺服来控制小车的转向
        s1 = Servo(1)
        s1.angle(angle, 0)
    

    最后,把这个新函数添加到你的代码,就可以实现让小车沿着目标线行驶了。请注意你需要根据实际使用的硬件和感知器调整代码,这里给出的仅仅是一个简化的例子。

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.