lua script that detect click on game object with no screen resolution dependents (defold…
- User
lua script that detect click on game object with no screen resolution dependents (defold engine)
- Assistant
To detect a click on a game object in the Defold engine without being dependent on screen resolution, you will often use the built-in input handling system to receive input actions and then calculate whether the action's position intersects with the game object's position. However, it's crucial to normalize or adjust these positions so they are not dependent on the screen resolution.
Here is a basic example of how you could set up a Lua script in Defold to handle click detection on a game object:
function init(self) msg.post(".", "acquire_input_focus") -- Request input focus for the game object -- Assume the game object has a sprite with a size that we can use for simple hit detection local sprite_url = msg.url("#sprite") -- URL to the sprite component local sprite_size = go.get(sprite_url, "size") -- Get the size of the sprite self.half_width = sprite_size.x / 2 self.half_height = sprite_size.y / 2 end function final(self) msg.post(".", "release_input_focus") -- Release input focus when the object is deleted end function point_inside_rect(px, py, rx, ry, rw, rh) return px > rx and px < rx + rw and py > ry and py < ry + rh end function on_input(self, action_id, action) if action_id == hash("touch") and action.pressed then -- Convert screen coordinates to world coordinates local world_position = screen_to_world(action.x, action.y) -- Assume the game object's pivot is at its center local go_pos = go.get_position() local left = go_pos.x - self.half_width local right = go_pos.x + self.half_width local top = go_pos.y + self.half_height local bottom = go_pos.y - self.half_height if point_inside_rect(world_position.x, world_position.y, left, bottom, right - left, top - bottom) then -- Your game object was clicked! print("Game object clicked!") end end end -- Example function to convert screen coordinates to world coordinates function screen_to_world(screen_x, screen_y) -- This example assumes a fixed projection setup. You may need to adjust the conversion based on your own camera setup. local screen_width = tonumber(sys.get_config("display.width")) local screen_height = tonumber(sys.get_config("display.height")) local world_x = (screen_x / screen_width) * 2 - 1 local world_y = (screen_y / screen_height) * 2 - 1 return vmath.vector3(world_x, world_y, 0) endKey Points:
acquire_input_focusandrelease_input_focusmanage input focus for the game object.on_inputfunction receives all input actions. It checks if the action is a touch (or click) and utilizes a function to determine if the point of action is within the bounds of the game object.screen_to_worldfunction is a simplistic approach to convert screen coordinates (dependent on resolution) to world coordinates, which are not directly dependent on the screen resolution. However, the real implementation of this function can vary significantly depending on your camera setup and how your game's coordinate system is configured. Adjust this function based on the specifics of your project.
Ensure you adjust and extend this example according to your game's needs, such as dealing with dynamic object sizes, handling different input sources (like mouse vs touch), or adapting to complex camera systems which could affect the screen-to-world coordinate conversion.
- User
dont work
- Assistant
My apologies for the confusion earlier. Let's address click detection in Defold more effectively this time, considering some adjustments and focusing on a more general approach that does not depend on screen resolution directly for detecting clicks on game objects.
Defold provides mechanisms to detect clicks or taps on objects, but handling resolution-independent input requires a bit of setup. You can use a collision object as a sensor to simplify interactions, making it somewhat independent of the actual screen resolution. Here's how you can approach it:
-
Setup Your GameObject:
- Add a
collision objectcomponent to your GameObject. - Set the
TypetoKinematicand add aShapethat matches the size of your object (for simplicity, you can use a box shape). - Check the
Is Triggeroption to ensure it acts as a sensor.
- Add a
-
Configure A Mouse Trigger:
- Go to the
game.input_bindingfile in your project. - Add a new
Mouse Triggerwith the actiontouch(or whatever name you prefer) and map it toMouse Button 1.
- Go to the
-
Scripting GameObject Click Detection:
You will handle the input within the script attached to your GameObject. The idea is to use the collision object you set up as a trigger. When the mouse clicks (or finger taps, in case of touch screens), you'll check for intersections with this collision object.
Here's an example script assuming you've set up the GameObject and input bindings as described:
function init(self) msg.post(".", "acquire_input_focus") -- Acquire input focus to receive on_input callbacks end function final(self) msg.post(".", "release_input_focus") -- Clean up end function on_input(self, action_id, action) if action_id == hash("touch") and action.pressed then -- Convert the screen coordinates to world coordinates local world_point = screen_to_world(action.x, action.y) -- Now test this point with a ray_cast or directly against the known positions/dimensions -- Here we assume you have the position and dimensions of your GameObject local result = physics.raycast(world_point, world_point, {hash("default")}) if result then for _, hit in ipairs(result) do if hit.id == go.get_id() then -- Check the ID to see if it's your object print("GameObject clicked!") -- React to the click, e.g., show some UI, change the scene, etc. end end end end end -- Helper function to convert screen coordinates to world coordinates function screen_to_world(x, y) local screen_width = render.get_width() local screen_height = render.get_height() local cam = camera.get_view_projection() local ndc = vmath.vector3((x / screen_width) * 2 - 1, (y / screen_height) * 2 - 1, 0) local world_point = vmath.inv(cam) * ndc return world_point endNote: This example includes a
screen_to_worldfunction assuming you have a camera setup (via a camera script or an external library). You might need to replace this conversion logic with one that matches your project setup. The conversion from screen space (pixels) to world space (game units) depends significantly on your camera's configuration, view, and projection matrices.Remember that the provided
screen_to_worldfunction is a simplified example and may require adjustments to work with your specific camera setup in Defold. For a more detailed and personalized solution, consider reviewing how your camera system is defined and adjust the conversion logic accordingly. -
- User
"for _, hit in ipairs(result) do" it is line is okay?
- Assistant
You're right to question that part of the code. My apologies for the confusion. In the context of the
physics.raycastfunction in Defold, the result is not an array of hits but rather a table describing a single hit (if a hit occurs) ornil(if there's no hit). So, iterating withipairsis incorrect in this context. Thank you for catching that mistake. Let's correct and simplify the approach based on a more appropriate handling of theraycastresult in Defold.Here's how you should handle a raycast result according to Defold's documentation:
function on_input(self, action_id, action) if action_id == hash("touch") and action.pressed then -- Convert the screen coordinates to world coordinates local world_point = screen_to_world(action.x, action.y) -- Perform the ray cast from slightly above the point to the point itself to ensure we catch objects at the point local from = vmath.vector3(world_point.x, world_point.y, 1) local to = vmath.vector3(world_point.x, world_point.y, -1) local result = physics.raycast(from, to, {hash("default")}) -- Assuming 'default' is your collision group if result then if result.id == go.get_id() then -- Checking if the hit object is this game object print("GameObject clicked!") -- React to the click accordingly end end end endThe correction here involves directly checking the result of the
raycastinstead of iterating over it, which matches how Defold returnsraycastresults.Make sure that the collision groups and masks are correctly set up in both your game objects and in the physics properties in the project settings so that your raycasts will only detect the objects you're interested in.
Regarding the conversion from screen coordinates to world coordinates (
screen_to_worldfunction), remember that this highly depends on your camera's setup. The pseudo-function provided before was simplified for illustrative purposes. In Defold, handling camera transformations, especially in 3D or when using an orthographic camera module for 2D games, requires specific calculations based on your camera's properties and configurations.This approach aims to be more resolution-independent by working within the game's world coordinates. However, make sure to adapt the logic to how your game and camera system are configured, as this greatly affects how input coordinates should be translated to in-game actions.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.