Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0613· openaiHugging Face Suzhen/CodeChat

In the MatLab code below, Figures 4 and 5 are not working. %% RANDOM WALKS, BROWNIAN…

  1. User

    In the MatLab code below, Figures 4 and 5 are not working.

    %% RANDOM WALKS, BROWNIAN MOTION, AND DIFFUSION

    % ————————— parameters width = 5; % width of pipe in mm a = 0.01; % lattice constant in mm pw = 0; % probability of waiting num_steps = 1000000; % # steps for histograms num_walks = 1000000; % # random walks for histograms

    % ————————— calculate lattice size based on width lattice_size = round(width/a);

    % ————————— parameterize the step probabilities A = 0.5; % electric field strength parameter ph = 1/2*(1+A^2); pv = 1 - ph; pu = pv/2; pd = pv/2; pL = (ph/2)(1-A); pR = (ph/2)(1+A);

    % ————————— initialize random walker position x = 0; y = lattice_size/2;

    % ————————— initialize mean squared displacement variables msd_x = zeros(1,num_steps); msd_y = zeros(1,num_steps);

    % ————————— loop over the # of steps for step = 2:num_steps+1 % choice: does walker wait or make a step? if rand<=pw % walker waits continue; else % walker makes a step % calculate the step direction dx = zeros(1,2); dy = zeros(1,2); dx(rand<=pL+0.5) = -1; dx(rand<=pR+(pL/2)) = 1; dy(rand<=pu+0.5) = -1; dy(rand<=pd+(pu/2)) = 1; % update walker position x = x+sum(dx); y = y+sum(dy); % reflect at the y-direction boundary if y<1 y = 2-y; elseif y>lattice_size y = 2lattice_size - y - 1; end % calculate mean squared displacement in each direction msd_x(step) = (xa)^2; msd_y(step) = ((y-(lattice_size/2))*a)^2; end end

    % —————————— 1) visualize the random walk trajectories figure; plot((0:num_steps)a, (msd_ya), 'b.') title('Random Walk Trajectories'); xlabel('x (mm)'); ylabel('y (mm)'); xlim([0,num_steps*a]);

    % ————————— 2) mean squared displacement in x-direction figure; n_steps = 1:num_steps; msd_x = cumsum(msd_x) ./ (1:num_steps+1); plot(n_steps(1:num_steps-1)*a, msd_x(2:num_steps)a^2, 'b') title('Mean Squared Displacement in the x-Direction'); xlabel('Number of Steps'); ylabel('Mean Squared Displacement'); xlim([0,num_stepsa]);

    % ————————— 3) mean squared displacement in y-direction figure; msd_y = cumsum(msd_y) ./ (1:num_steps+1); plot(n_steps(1:num_steps)*a, msd_y(1:num_steps)a^2, 'b') title('Mean Squared Displacement in the y-Direction'); xlabel('Number of Steps'); ylabel('Mean Squared Displacement'); xlim([0, num_stepsa]);

    % ————————— 4) histogram of locations in x-direction figure; for num_steps = [100,1000,10000,100000,1000000] x_hist = zeros(1,lattice_size+1); for walk = 1:num_walks x=0; for step = 1:num_steps dx = zeros(1,2); dx(rand<=pL+0.5) = -1; dx(rand<=pR+(pL/2)) = 1; x = x+sum(dx); if x<0 x=0; elseif x>lattice_size x = lattice_size; end end x_hist(x+1) = x_hist(x+1) + 1; end subplot(2,3,find([100,1000,10000,100000,1000000] == num_steps)); bar(0:lattice_size, x_hist / num_walks, 'b'); title(['Histogram of x-locations after ', num2str(num_steps), ' steps']); xlabel('x'); ylabel('Probability'); end

    % ————————— 5) histogram of locations in y-direction figure; for num_steps = [100,1000,10000,100000,1000000] y_hist = zeros(1,lattice_size+1); for walk = 1:num_walks x = 0; y = lattice_size/2; for step = 1:num_steps dx = zeros(1,2); dy = zeros(1,2); dx(rand<=pL+0.5) = -1; dx(rand<=pR+(pL/2)) = 1; dy(rand<=pu+0.5) = -1; dy(rand<=pd+(pu/2)) = 1; x = x+sum(dx); y = y+sum(dy); if y<1 y = 2-y; elseif y>lattice_size y = 2*lattice_size - y - 1; end end y_hist(y+1) = y_hist(y+1) + 1; end subplot(2,3,find([100,1000,10000,100000,1000000] == num_steps)); bar(0:lattice_size, y_hist / num_walks, 'b'); title(['Histogram of y-locations after ', num2str(num_steps), ' steps']); xlabel('y'); ylabel('Probability'); end

  2. Assistant

    It seems that Figures 4 and 5 are not working because the code for creating those figures is inside a loop where the variable "num_steps" is being redefined.

    To fix this issue, you can change the name of the loop variable "num_steps" to something else, like "steps" or "n_steps". Then, you need to update the code inside the loop to use the new loop variable instead of "num_steps". Here's the updated code:

    % ————————— 4) histogram of locations in x-direction
    figure;
    for steps = [100,1000,10000,100000,1000000]
        x_hist = zeros(1,lattice_size+1);
        for walk = 1:num_walks
            x=0;
            for step = 1:steps
                dx = zeros(1,2);
                dx(rand<=pL+0.5) = -1;
                dx(rand<=pR+(pL/2)) = 1;
                x = x+sum(dx);
                if x<0
                    x=0;
                elseif x>lattice_size
                    x = lattice_size;
                end
            end
            x_hist(x+1) = x_hist(x+1) + 1;
        end
        subplot(2,3,find([100,1000,10000,100000,1000000] == steps));
        bar(0:lattice_size, x_hist / num_walks, 'b');
        title(['Histogram of x-locations after ', num2str(steps), ' steps']);
        xlabel('x');
        ylabel('Probability');
    end
    
    % ————————— 5) histogram of locations in y-direction
    figure;
    for steps = [100,1000,10000,100000,1000000]
        y_hist = zeros(1,lattice_size+1);
        for walk = 1:num_walks
            x = 0;
            y = lattice_size/2;
            for step = 1:steps
                dx = zeros(1,2);
                dy = zeros(1,2);
                dx(rand<=pL+0.5) = -1;
                dx(rand<=pR+(pL/2)) = 1;
                dy(rand<=pu+0.5) = -1;
                dy(rand<=pd+(pu/2)) = 1;
                x = x+sum(dx);
                y = y+sum(dy);
                if y<1
                    y = 2-y;
                elseif y>lattice_size
                    y = 2*lattice_size - y - 1;
                end
            end
            y_hist(y+1) = y_hist(y+1) + 1;
        end
        subplot(2,3,find([100,1000,10000,100000,1000000] == steps));
        bar(0:lattice_size, y_hist / num_walks, 'b');
        title(['Histogram of y-locations after ', num2str(steps), ' steps']);
        xlabel('y');
        ylabel('Probability');
    end
    

    With these changes, the code should now create the histograms for Figures 4 and 5 correctly.

  3. User

    Incorrect solution

  4. Assistant

    Apologies for the incorrect solution. Upon reviewing the code again, I noticed that the issue lies in the way the num_steps variable is being used in both Figures 4 and 5.

    To fix the issue, you can modify the loop variables in the loop headers of Figures 4 and 5 to use a different variable name, such as n_steps or steps. Here's the updated code:

    % ————————— 4) histogram of locations in x-direction
    figure;
    for steps = [100,1000,10000,100000,1000000]
        x_hist = zeros(1,lattice_size+1);
        for walk = 1:num_walks
            x=0;
            for n_steps = 1:steps
                dx = zeros(1,2);
                dx(rand<=pL+0.5) = -1;
                dx(rand<=pR+(pL/2)) = 1;
                x = x+sum(dx);
                if x<0
                    x=0;
                elseif x>lattice_size
                    x = lattice_size;
                end
            end
            x_hist(x+1) = x_hist(x+1) + 1;
        end
        subplot(2,3,find([100,1000,10000,100000,1000000] == steps));
        bar(0:lattice_size, x_hist / num_walks, 'b');
        title(['Histogram of x-locations after ', num2str(steps), ' steps']);
        xlabel('x');
        ylabel('Probability');
    end
    
    % ————————— 5) histogram of locations in y-direction
    figure;
    for steps = [100,1000,10000,100000,1000000]
        y_hist = zeros(1,lattice_size+1);
        for walk = 1:num_walks
            x = 0;
            y = lattice_size/2;
            for n_steps = 1:steps
                dx = zeros(1,2);
                dy = zeros(1,2);
                dx(rand<=pL+0.5) = -1;
                dx(rand<=pR+(pL/2)) = 1;
                dy(rand<=pu+0.5) = -1;
                dy(rand<=pd+(pu/2)) = 1;
                x = x+sum(dx);
                y = y+sum(dy);
                if y<1
                    y = 2-y;
                elseif y>lattice_size
                    y = 2*lattice_size - y - 1;
                end
            end
            y_hist(y+1) = y_hist(y+1) + 1;
        end
        subplot(2,3,find([100,1000,10000,100000,1000000] == steps));
        bar(0:lattice_size, y_hist / num_walks, 'b');
        title(['Histogram of y-locations after ', num2str(steps), ' steps']);
        xlabel('y');
        ylabel('Probability');
    end
    

    With these changes, the code should now create the histograms for Figures 4 and 5 correctly.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.