void panic(const char *fmt, ...) { static DEFINESPINLOCK(paniclock); static char…
- User
void panic(const char *fmt, ...) { static DEFINE_SPINLOCK(panic_lock); static char buf[1024]; va_list args; long i, i_next = 0; int state = 0;
/* * Disable local interrupts. This will prevent panic_smp_self_stop * from deadlocking the first cpu that invokes the panic, since * there is nothing to prevent an interrupt handler (that runs * after the panic_lock is acquired) from invoking panic again. */ local_irq_disable(); /* * It's possible to come here directly from a panic-assertion and * not have preempt disabled. Some functions called from here want * preempt to be disabled. No point enabling it later though... * * Only one CPU is allowed to execute the panic code from here. For * multiple parallel invocations of panic, all other CPUs either * stop themself or will wait until they are stopped by the 1st CPU * with smp_send_stop(). */ if (!spin_trylock(&panic_lock)) panic_smp_self_stop(); console_verbose(); bust_spinlocks(1); va_start(args, fmt); vsnprintf(buf, sizeof(buf), fmt, args); va_end(args); printk(KERN_EMERG "Kernel panic - not syncing: %s\n",buf);#ifdef CONFIG_DEBUG_BUGVERBOSE /* * Avoid nested stack-dumping if a panic occurs during oops processing */ if (!test_taint(TAINT_DIE) && oops_in_progress <= 1) dump_stack(); #endif
/* * If we have crashed and we have a crash kernel loaded let it handle * everything else. * Do we want to call this before we try to display a message? */ crash_kexec(NULL); /* * Note smp_send_stop is the usual smp shutdown function, which * unfortunately means it may not be hardened to work in a panic * situation. */ smp_send_stop(); /* * Run any panic handlers, including those that might need to * add information to the kmsg dump output. */ atomic_notifier_call_chain(&panic_notifier_list, 0, buf); kmsg_dump(KMSG_DUMP_PANIC); bust_spinlocks(0); if (!panic_blink) panic_blink = no_blink; if (panic_timeout > 0) { /* * Delay timeout seconds before rebooting the machine. * We can't use the "normal" timers since we just panicked. */ printk(KERN_EMERG "Rebooting in %d seconds..", panic_timeout); for (i = 0; i < panic_timeout * 1000; i += PANIC_TIMER_STEP) { touch_nmi_watchdog(); if (i >= i_next) { i += panic_blink(state ^= 1); i_next = i + 3600 / PANIC_BLINK_SPD; } mdelay(PANIC_TIMER_STEP); } } if (panic_timeout != 0) { /* * This will not be a clean reboot, with everything * shutting down. But if there is a chance of * rebooting the system it will be rebooted. */ if (in_interrupt()) { printk(KERN_EMERG "In interruptable of panic..."); if(gl_desc) { printk(KERN_EMERG "hw_irq = %ld\n", gl_desc->irq_data.hwirq); gl_desc->irq_data.chip->irq_eoi(&gl_desc->irq_data); } } emergency_restart(); }#ifdef sparc { extern int stop_a_enabled; /* Make sure the user can actually press Stop-A (L1-A) */ stop_a_enabled = 1; printk(KERN_EMERG "Press Stop-A (L1-A) to return to the boot prom\n"); } #endif #if defined(CONFIG_S390) { unsigned long caller;
caller = (unsigned long)__builtin_return_address(0); disabled_wait(caller); }#endif local_irq_enable(); for (i = 0; ; i += PANIC_TIMER_STEP) { touch_softlockup_watchdog(); if (i >= i_next) { i += panic_blink(state ^= 1); i_next = i + 3600 / PANIC_BLINK_SPD; } mdelay(PANIC_TIMER_STEP); } }函数在哪里禁用调度了
- Assistant
函数中在以下代码段禁用了调度:
local_irq_disable();该代码段调用了
local_irq_disable()函数来禁用本地中断,这将阻止调度程序运行,从而确保在函数执行期间不会被抢占。 - User
除了禁止中断呢
- Assistant
除了禁止中断外,函数还在以下位置执行了以下操作:
- 在开始部分调用了
bust_spinlocks(1)函数,该函数可能会禁用调度程序运行。 - 在函数执行中调用了
smp_send_stop()函数,该函数通常会尝试关闭所有CPU核,从而停止调度程序的运行。 - 在函数结束后调用了
local_irq_enable()函数,重新启用本地中断,允许调度程序继续运行。
- 在开始部分调用了
- User
smp_send_stop函数什么作用
- Assistant
smp_send_stop()函数的作用是用来停止所有CPU核的运行,以确保在发生临界情况(如系统崩溃、内核恐慌等)时所有CPU核都停止工作。这样可以避免多个CPU核在同一时间尝试处理同一问题,造成混乱或冲突。停止CPU核的运行也可以为系统的故障诊断和恢复提供更加稳定的环境。在调用panic()函数时,通常会在其中调用smp_send_stop()函数来确保所有CPU核在处理系统崩溃时都处于停止状态。
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.