Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· openaiHugging Face Suzhen/CodeChat

在x264函数macroblockcacheloadneighbours中的以下代码,是什么意思 if( top >= 0 ) { h->mb.ineighbourframe…

  1. User

    在x264函数macroblock_cache_load_neighbours中的以下代码,是什么意思 if( top >= 0 ) { h->mb.i_neighbour_frame |= MB_TOP; h->mb.i_mb_top_xy = top; h->mb.i_mb_top_y = top_y; h->mb.i_mb_type_top = h->mb.type[h->mb.i_mb_top_xy]; if( h->mb.slice_table[top] == h->sh.i_first_mb ) { h->mb.i_neighbour |= MB_TOP;

                if( !h->param.b_constrained_intra || IS_INTRA( h->mb.i_mb_type_top ) )
                    h->mb.i_neighbour_intra |= MB_TOP;
    
                /* We only need to prefetch the top blocks because the left was just written
                 * to as part of the previous cache_save.  Since most target CPUs use write-allocate
                 * caches, left blocks are near-guaranteed to be in L1 cache.  Top--not so much. */
                x264_prefetch( &h->mb.cbp[top] );
                x264_prefetch( h->mb.intra4x4_pred_mode[top] );
                x264_prefetch( &h->mb.non_zero_count[top][12] );
                /* These aren't always allocated, but prefetching an invalid address can't hurt. */
                x264_prefetch( &h->mb.mb_transform_size[top] );
                x264_prefetch( &h->mb.skipbp[top] );
            }
        }
    
  2. Assistant

    这段代码是在加载宏块的邻居块时使用的。如果存在上邻居块,设置当前宏块的相关信息(如i_neighbour_frame、i_mb_top_xy、i_mb_top_y、i_mb_type_top等),并检查上邻居块是否是当前slice的第一个宏块,如果是,则设置相关标志(i_neighbour、i_neighbour_intra)以及使用x264_prefetch函数进行预取,以优化缓存性能。

  3. User

    对每行做注释

  4. Assistant
    if(top >= 0) //如果存在上邻居宏块
    {
        h->mb.i_neighbour_frame |= MB_TOP; //设置当前宏块的i_neighbour_frame中的MB_TOP标志位
        h->mb.i_mb_top_xy = top; //设置当前宏块的上邻居宏块位置
        h->mb.i_mb_top_y = top_y; //设置当前宏块的上邻居宏块所在行数
        h->mb.i_mb_type_top = h->mb.type[h->mb.i_mb_top_xy]; //设置当前宏块的上方宏块的宏块类型
        if(h->mb.slice_table[top] == h->sh.i_first_mb) //如果上邻居宏块是当前slice的第一个宏块
        {
            h->mb.i_neighbour |= MB_TOP; //设置当前宏块的i_neighbour中的MB_TOP标志位
    
            if(!h->param.b_constrained_intra || IS_INTRA(h->mb.i_mb_type_top)) //如果参数中未指定强制帧内预测或者上邻居宏块不是帧间预测
                h->mb.i_neighbour_intra |= MB_TOP; //设置当前宏块的i_neighbour_intra中的MB_TOP标志位
    
            x264_prefetch(&h->mb.cbp[top]); //预取上邻居宏块层的cbp值
            x264_prefetch(h->mb.intra4x4_pred_mode[top]); //预取上邻居宏块层的汇编预测模式
            x264_prefetch(&h->mb.non_zero_count[top][12]); //预取上邻居宏块层(块编码层)的非零个数
            //这些不是总是分配,但预取一个无效地址也无妨
            x264_prefetch(&h->mb.mb_transform_size[top]); //预取上邻居宏块层的变换块大小
            x264_prefetch(&h->mb.skipbp[top]); //预取上邻居宏块层的skipbp值
        }
    }
    

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.