Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· openaiHugging Face Suzhen/CodeChat

fix the following matlab code to use the gipps model using the following ODE defentions:…

  1. User

    fix the following matlab code to use the gipps model using the following ODE defentions: █(&v_n (t+τ)=min{v_n (t)+2.5a_n τ(1-v_n (t)/V_n ) (0.025+v_n (t)/V_n )^(1/2),┤@&├ b_n τ+√(b_n^2 τ^2-b_n [2[x_(n-1) (t)-s_(n-1)-x_n (t)]-v_n (t)τ-v_(n-1) (t)^2/b ̂ ] )}@&) Also use X instead of * to represent multiplication : % Define simulation parameters dt = 0.01; % Time interval T = 30; % Total simulation time time = 0:dt:T; % Time vector

    % Define initial conditions N_cars = 10; % Number of cars v0 = 120 / 3.6; % Desired speed in m/s s0 = 2; % Minimum gap between cars in m T = 1.5; % Safe time headway a = 0.3; % Maximum acceleration in m/s^2 b = 2; % Comfortable braking deceleration in m/s^2 L = [4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5]; % Car length vector W = [2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2]; % Car width vector x = cumsum([0, 10ones(1,N_cars-1)]); % Car positions v = v0ones(1,N_cars); % Car speeds acc = zeros(1,N_cars); % Car accelerations dist = zeros(1,N_cars); % Car distances colors=hsv(N_cars) % Run simulation for i = 2:length(time) % Update positions x = x + vdt + 0.5acc*dt^2;

    % Update speeds for j = 1:N_cars % Calculate distance to lead car if j < N_cars dist(j) = x(j+1) - x(j) - L(j) - L(j+1); else dist(j) = 1e10; % Assume no car ahead of last car end % Calculate IDM acceleration acc(j) = IDM(acc(j), dist(j), v(j), v0, s0, T, a, b); end v = v + acc*dt;

    % Animate results clf; hold on;

    for j = 1:N_cars

    rectangle('Position',[x(j)-L(j)/2,(j-1)*2,L(j),2],'FaceColor',colors(j,:),'Curvature',j/N_cars); end xlim([0, max(x)+50]); ylim([0, sum(W)]); xlabel('Distance (m)'); ylabel('Lane width (m)'); title(sprintf('Time = %0.1f s', time(i))); drawnow; end

    % Define IDM function function acc = IDM(acc, dist, v, v0, s0, T, a, b) acc = a*(1 - (v/v0)^4 - (s0 + vT - sqrt((s0 + vT)^2 - 4v(v-dist)/(2*b)))/dist^2); acc = max(acc, -b); % Limit braking acceleration end

  2. Assistant

    % Define simulation parameters dt = 0.01; % Time interval T = 30; % Total simulation time time = 0:dt:T; % Time vector

    % Define initial conditions N_cars = 10; % Number of cars v0 = 120 / 3.6; % Desired speed in m/s s0 = 2; % Minimum gap between cars in m T = 1.5; % Safe time headway a = 0.3; % Maximum acceleration in m/s^2 b = 2; % Comfortable braking deceleration in m/s^2 L = [4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5]; % Car length vector W = [2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2]; % Car width vector x = cumsum([0, 10ones(1,N_cars-1)]); % Car positions v = v0ones(1,N_cars); % Car speeds acc = zeros(1,N_cars); % Car accelerations dist = zeros(1,N_cars); % Car distances colors=hsv(N_cars);

    % Run simulation for i = 2:length(time) % Update positions x = x + vdt + 0.5acc*dt^2;

    % Calculate time lag
    lag = s0 + v*T;
    
    % Update speeds and distances
    for j = 1:N_cars
        % Calculate distance to lead car
        if j < N_cars
            gap = x(j+1) - x(j) - L(j) - L(j+1);
        else
            gap = 1e10; % Assume no car ahead of last car
        end
        
        % Calculate Gipps acceleration
        vn = v(j);
        Vn = v0;
        bn = b;
        Xn1t = x(j-1);
        Sn1 = x(j-1) + L(j-1);
        Xn = x(j);
        Sn = x(j) + L(j);
        
        tau = 1; % time lag
        
        front_term = 2.5*a*tau*(1-(vn/Vn))*(0.025+vn/Vn)^0.5;
        back_term = bn*tau;
        sqrt_term = sqrt(back_term*back_term - bn*(2*(Xn1t-Sn1) - vn*tau - v(j-1)*v(j-1)/bn));
        acc(j) = min(vn+front_term, back_term+sqrt_term);
        
        % Limit braking acceleration
        acc(j) = max(acc(j), -b); 
        
        % Update distance
        if j < N_cars
            dist(j) = gap;
        else
            dist(j) = 1e10;
        end
    end
    
    % Update speeds
    v = v + acc*dt;
    
    % Animate results
    clf;
    hold on;
    
    for j = 1:N_cars
        rectangle('Position',[x(j)-L(j)/2,(j-1)*2,L(j),2],'FaceColor',colors(j,:),'Curvature',j/N_cars);
    end
    xlim([0, max(x)+50]);
    ylim([0, sum(W)]);
    xlabel('Distance (m)');
    ylabel('Lane width (m)');
    title(sprintf('Time = %0.1f s', time(i)));
    drawnow;
    

    end

  3. User

    Array indices must be positive integers or logical values.

    Error in Gipps_Car_following_model (line 42) Xn1t = x(j-1);

  4. Assistant

    The error "Array indices must be positive integers or logical values" occurs because you are trying to access an element of an array with an index that is less than 1. In this case, the error is occurring in line 42 where you want to access x(j-1) when j is equal to 1. To fix the error, you can add a conditional statement to check if j is equal to 1 and handle it separately.

    Here is the fixed code:

    % Define simulation parameters
    dt = 0.01; % Time interval
    T = 30; % Total simulation time
    time = 0:dt:T; % Time vector
    
    % Define initial conditions
    N_cars = 10; % Number of cars
    v0 = 120 / 3.6; % Desired speed in m/s
    s0 = 2; % Minimum gap between cars in m
    T = 1.5; % Safe time headway
    a = 0.3; % Maximum acceleration in m/s^2
    b = 2; % Comfortable braking deceleration in m/s^2
    L = [4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5]; % Car length vector
    W = [2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2]; % Car width vector
    x = cumsum([0, 10*ones(1,N_cars-1)]); % Car positions
    v = v0*ones(1,N_cars); % Car speeds
    acc = zeros(1,N_cars); % Car accelerations
    dist = zeros(1,N_cars); % Car distances
    colors=hsv(N_cars);
    
    % Run simulation
    for i = 2:length(time)
        % Update positions
        x = x + v*dt + 0.5*acc*dt^2;
        
        % Calculate time lag
        lag = s0 + v*T;
        
        % Update speeds and distances
        for j = 1:N_cars
            % Calculate distance to lead car
            if j < N_cars
                gap = x(j+1) - x(j) - L(j) - L(j+1);
            else
                gap = 1e10; % Assume no car ahead of last car
            end
            
            % Calculate Gipps acceleration
            vn = v(j);
            Vn = v0;
            bn = b;
            if j == 1 % Handle case when j=1 separately
                Xn1t = 0; % Assume no car ahead of first car
                Sn1 = 0; % Assume no car ahead of first car
                Xn = x(j);
                Sn = x(j) + L(j);
            else % General case
                Xn1t = x(j-1);
                Sn1 = x(j-1) + L(j-1);
                Xn = x(j);
                Sn = x(j) + L(j);
            end
            
            tau = 1; % time lag
            
            front_term = 2.5*a*tau*(1-(vn/Vn))*(0.025+vn/Vn)^0.5;
            back_term = bn*tau;
            sqrt_term = sqrt(back_term*back_term - bn*(2*(Xn1t-Sn1) - vn*tau - v(j-1)*v(j-1)/bn));
            acc(j) = min(vn+front_term, back_term+sqrt_term);
            
            % Limit braking acceleration
            acc(j) = max(acc(j), -b); 
            
            % Update distance
            if j < N_cars
                dist(j) = gap;
            else
                dist(j) = 1e10;
            end
        end
        
        % Update speeds
        v = v + acc*dt;
        
        % Animate results
        clf;
        hold on;
        
        for j = 1:N_cars
            rectangle('Position',[x(j)-L(j)/2,(j-1)*2,L(j),2],'FaceColor',colors(j,:),'Curvature',j/N_cars);
        end
        xlim([0, max(x)+50]);
        ylim([0, sum(W)]);
        xlabel('Distance (m)');
        ylabel('Lane width (m)');
        title(sprintf('Time = %0.1f s', time(i)));
        drawnow;
    end
    
  5. User

    Array indices must be positive integers or logical values.

    Error in Gipps_Car_following_model (line 58) sqrt_term = sqrt(back_termback_term - bn(2*(Xn1t-Sn1) - vn*tau - v(j-1)*v(j-1)/bn));

  6. Assistant

    The error "Array indices must be positive integers or logical values" occurs because you are trying to access an element of an array with an index that is less than 1. In this case, the error is occurring in line 58 where you want to access v(j-1) when j is equal to 1. To fix the error, you can add a conditional statement to check if j is equal to 1 and handle it separately.

    Here is the fixed code:

    % Define simulation parameters
    dt = 0.01; % Time interval
    T = 30; % Total simulation time
    time = 0:dt:T; % Time vector
    
    % Define initial conditions
    N_cars = 10; % Number of cars
    v0 = 120 / 3.6; % Desired speed in m/s
    s0 = 2; % Minimum gap between cars in m
    T = 1.5; % Safe time headway
    a = 0.3; % Maximum acceleration in m/s^2
    b = 2; % Comfortable braking deceleration in m/s^2
    L = [4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5]; % Car length vector
    W = [2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2]; % Car width vector
    x = cumsum([0, 10*ones(1,N_cars-1)]); % Car positions
    v = v0*ones(1,N_cars); % Car speeds
    acc = zeros(1,N_cars); % Car accelerations
    dist = zeros(1,N_cars); % Car distances
    colors=hsv(N_cars);
    
    % Run simulation
    for i = 2:length(time)
        % Update positions
        x = x + v*dt + 0.5*acc*dt^2;
        
        % Calculate time lag
        lag = s0 + v*T;
        
        % Update speeds and distances
        for j = 1:N_cars
            % Calculate distance to lead car
            if j < N_cars
                gap = x(j+1) - x(j) - L(j) - L(j+1);
            else
                gap = 1e10; % Assume no car ahead of last car
            end
            
            % Calculate Gipps acceleration
            vn = v(j);
            Vn = v0;
            bn = b;
            if j == 1 % Handle case when j=1 separately
                Xn1t = 0; % Assume no car ahead of first car
                Sn1 = 0; % Assume no car ahead of first car
                Xn = x(j);
                Sn = x(j) + L(j);
                vn_1 = 0; % Assume zero speed of car behind first car
            else % General case
                Xn1t = x(j-1);
                Sn1 = x(j-1) + L(j-1);
                Xn = x(j);
                Sn = x(j) + L(j);
                vn_1 = v(j-1);
            end
            
            tau = 1; % time lag
            
            front_term = 2.5*a*tau*(1-(vn/Vn))*(0.025+vn/Vn)^0.5;
            back_term = bn*tau;
            sqrt_term = sqrt(back_term*back_term - bn*(2*(Xn1t-Sn1) - vn*tau - vn_1*vn_1/bn));
            acc(j) = min(vn+front_term, back_term+sqrt_term);
            
            % Limit braking acceleration
            acc(j) = max(acc(j), -b); 
            
            % Update distance
            if j < N_cars
                dist(j) = gap;
            else
                dist(j) = 1e10;
            end
        end
        
        % Update speeds
        v = v + acc*dt;
        
        % Animate results
        clf;
        hold on;
        
        for j = 1:N_cars
            rectangle('Position',[x(j)-L(j)/2,(j-1)*2,L(j),2],'FaceColor',colors(j,:),'Curvature',j/N_cars);
        end
        xlim([0, max(x)+50]);
        ylim([0, sum(W)]);
        xlabel('Distance (m)');
        ylabel('Lane width (m)');
        title(sprintf('Time = %0.1f s', time(i)));
        drawnow;
    end
    
  7. User

    Array indices must be positive integers or logical values.

    Error in Gipps_Car_following_model (line 60) sqrt_term = sqrt(back_termback_term - bn(2(Xn1t-Sn1) - vntau - vn_1vn_1/bn));

  8. Assistant

    The error "Array indices must be positive integers or logical values" occurs because you have missed the multiplication sign (*) between bn and the expression 2*(Xn1t-Sn1). So, MATLAB is interpreting bn(2*(Xn1t-Sn1) - vn*tau - vn_1*vn_1/bn) as an array indexing operation, hence, producing the error.

    To fix the error, you just need to add the missing multiplication sign.

    Here is the fixed code:

    % Define simulation parameters
    dt = 0.01; % Time interval
    T = 30; % Total simulation time
    time = 0:dt:T; % Time vector
    
    % Define initial conditions
    N_cars = 10; % Number of cars
    v0 = 120 / 3.6; % Desired speed in m/s
    s0 = 2; % Minimum gap between cars in m
    T = 1.5; % Safe time headway
    a = 0.3; % Maximum acceleration in m/s^2
    b = 2; % Comfortable braking deceleration in m/s^2
    L = [4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5]; % Car length vector
    W = [2, 2.2, 2, 2.2, 2, 2.2,