Skip to content
TheChatArchiveThe Chat Archive
gpt-4-1106-preview· openaiHugging Face Suzhen/CodeChat

with discord bot ,how to handle the lightbulb.messagecommand? get the image attachment

  1. User

    with discord bot ,how to handle the lightbulb.messagecommand? get the image attachment

  2. Assistant

    In Discord, using the lightbulb library, which is an extension for the hikari Discord API wrapper, you can process message commands and handle image attachments with a bit of specific code within your bot's command function. Below is an example of how you can create a message command that looks for an image attachment when a certain command is invoked.

    Firstly, ensure you have hikari and hikari-lightbulb installed and the bot set up properly. Then you could use the following snippet:

    import lightbulb
    import hikari
    
    bot = lightbulb.BotApp(token='YOUR_BOT_TOKEN', prefix='!')
    
    @bot.command
    @lightbulb.command('image', 'Processes an image attachment.')
    @lightbulb.implements(lightbulb.MessageCommand)
    async def process_image(ctx: lightbulb.Context) -> None:
        if not ctx.event.message.attachments:
            await ctx.respond("No attachment found.")
            return
    
        # Assuming that we only care about the first attachment
        attachment = ctx.event.message.attachments[0]
    
        if not (attachment.filename.lower().endswith(('.png', '.jpg', '.jpeg', '.gif'))):
            await ctx.respond("The attachment is not a valid image.")
            return
    
        # Now you can work with the image attachment
        # For example, download the image:
        image_data = await attachment.read()
        with open(f'./images/{attachment.filename}', 'wb') as f:
            f.write(image_data)
    
        # Send a response indicating success
        await ctx.respond(f"Image {attachment.filename} has been processed.")
    
    bot.run()
    

    In this example, when a user uses the command !image in Discord, the process_image function checks if there's an attachment with the message. If the attachment is an image (as determined by the filename's extension), the bot reads the attachment data and saves it to the local filesystem.

    Please assure to adjust the file paths and YOUR_BOT_TOKEN with your actual bot token. Also, make sure your bot has the permissions required to read message content and access attachments in the channels where it needs to operate.

    Do not forget to handle permissions and error cases appropriately in a real-world application. The above example is simplified for clarity.

  3. User

    Traceback (most recent call last): File "/usr/local/lib/python3.10/site-packages/lightbulb/app.py", line 1175, in invoke_application_command await context.invoke() File "/usr/local/lib/python3.10/site-packages/lightbulb/context/base.py", line 334, in invoke await self.command.invoke(self) File "/usr/local/lib/python3.10/site-packages/lightbulb/commands/base.py", line 801, in invoke await self(context, **kwargs) File "/usr/local/lib/python3.10/site-packages/lightbulb/commands/base.py", line 715, in call return await self.callback(context, **kwargs) TypeError: aduio_gen() got an unexpected keyword argument 'target'

    The above exception was the direct cause of the following exception:

    Traceback (most recent call last): File "/usr/local/lib/python3.10/site-packages/lightbulb/app.py", line 1216, in handle_interaction_create_for_application_commands await self.invoke_application_command(context) File "/usr/local/lib/python3.10/site-packages/lightbulb/app.py", line 1193, in invoke_application_command raise new_exc lightbulb.errors.CommandInvocationError: An error occurred during command 'audiogen' invocation

    audio_gen_plugin = lightbulb.Plugin('autio', 'audio commands')

    @audio_gen_plugin.command() @lightbulb.add_checks(lightbulb.owner_only) @lightbulb.add_cooldown(3, 3, lightbulb.UserBucket) @lightbulb.option("duration", "The duration of the audio clip", required=False, default=10) @lightbulb.option("negative_prompt", "The negative prompt to generate an image for", required=False) @lightbulb.command("audiogen", "Generate an image based on input text", pass_options=True) @lightbulb.implements(lightbulb.SlashCommand, lightbulb.PrefixCommand, lightbulb.MessageCommand) async def aduio_gen(ctx: lightbulb.Context, negative_prompt: str = None, duration: int = 10):

    match ctx : 
        case lightbulb.SlashCommandContext:
            pass
        case lightbulb.MessageCommandContext:
            if not ctx.event.message.attachments:
                await ctx.respond("No attachment found.")
                return
    
            # Assuming that we only care about the first attachment
            attachment = ctx.event.message.attachments[0]
    
            if not (attachment.filename.lower().endswith(('.png', '.jpg', '.jpeg', '.gif'))):
                await ctx.respond("The attachment is not a valid image.")
                return
    
            # Now you can work with the image attachment
            # For example, download the image:
            image_data = await attachment.read()
            with open(f'./images/{attachment.filename}', 'wb') as f:
                f.write(image_data)
    
            # Send a response indicating success
            await ctx.respond(f"Image {attachment.filename} has been processed.")
            
            return
        case lightbulb.PrefixCommandContext:
            pass.
    
  4. Assistant

    The error message you're seeing indicates that the aduio_gen function is receiving an unexpected keyword argument named target. This is because for MessageCommands, the context (ctx) passed into the function contains a target attribute that holds a reference to the message that the command is being invoked upon. You do not seem to be handling this target attribute in your aduio_gen function signature, hence the error.

    Here's how you might adjust your code so that it can properly handle a MessageCommand:

    @lightbulb.implements(lightbulb.SlashCommand, lightbulb.PrefixCommand)
    async def aduio_gen(ctx: lightbulb.Context, negative_prompt: str = None, duration: int = 10):
        # Your existing code...
        ...
    
    @aduio_gen.child
    @lightbulb.implements(lightbulb.MessageCommand)
    async def aduio_gen_message(ctx: lightbulb.MessageContext):
        if not ctx.event.message.attachments:
            await ctx.respond("No attachment found.")
            return
    
        # Assuming that we only care about the first attachment
        attachment = ctx.event.message.attachments[0]
    
        if not (attachment.filename.lower().endswith(('.png', '.jpg', '.jpeg', '.gif'))):
            await ctx.respond("The attachment is not a valid image.")
            return
    
        # Now you can work with the image attachment
        # For example, download the image:
        image_data = await attachment.read()
        with open(f'./images/{attachment.filename}', 'wb') as f:
            f.write(image_data)
    
        # Send a response indicating success
        await ctx.respond(f"Image {attachment.filename} has been processed.")
    

    This separates the MessageCommand handling into its own function (aduio_gen_message) which is a child of the main aduio_gen command, allowing you to keep the target attribute out of the main function.

    Do not forget to replace aduio with audio if that is really a typo in your function name.

    Here's the corrected structure:

    1. We implement the SlashCommand and PrefixCommand in the main command function aduio_gen.
    2. We create aduio_gen_message as a child function to specifically handle the MessageCommand implementation.

    Please make sure that you only implement the MessageCommand for the child function if the target attribute is part of the MessageCommand context you need to handle.

    Lastly, adapt the body of aduio_gen and possibly aduio_gen_message for your specific bot logic and add any missing functionality that you require.

  5. User

    @lightbulb.implements(lightbulb.SlashCommand, lightbulb.PrefixCommand, lightbulb.MessageCommand). 这个三个命令不能放一起吗?

  6. Assistant

    在 lightbulb 库的某些版本中,你可能会遇到问题将 SlashCommand、PrefixCommand 和 MessageCommand 放在一起使用。一般情况下,建议将不同类型的命令处理分开,尤其是当它们的行为有所不同时。这种分离方法有助于代码的清晰和维护,并允许对每种命令类型进行详细的自定义处理。

    更准确的是,SlashCommand 和 PrefixCommand 通常接收相同的参数(通过用户明确输入),而 MessageCommand 是基于触发它的消息,消息可能包含附件或其它上下文信息,它们会有不同的属性可以访问。

    为了处理 MessageCommand,你通常需要定义一个独立的函数或者子命令来处理消息上下文,正如我之前展示的 aduio_gen_message 那样。

    对于特定的 lightbulb 版本,如果你确实希望在一个函数中既处理斜杠命令、前缀命令,又处理消息命令,你需要仔细查看文档以了解是否支持这种用法,并确保你处理了函数接受的所有潜在参数,包括 MessageCommandContext 可能提供的 target。

    一般而言,结合使用多种命令类型需要你通过检查上下文的类型(ctx) 来区分你的处理逻辑,例如:

    @lightbulb.command('mycommand', 'Description of my command')
    @lightbulb.implements(lightbulb.SlashCommand, lightbulb.PrefixCommand, lightbulb.MessageCommand)
    async def my_command(ctx: lightbulb.Context):
        if isinstance(ctx, lightbulb.SlashCommandContext):
            # 处理斜杠命令逻辑
            ...
        elif isinstance(ctx, lightbulb.PrefixCommandContext):
            # 处理前缀命令逻辑
            ...
        elif isinstance(ctx, lightbulb.MessageCommandContext):
            # 处理消息命令逻辑
            ...
    

    请根据您使用的 lightbulb 库的版本和具体文档来决定最佳实践。如有必要,请查阅最新的 lightbulb 和 hikari 库文档以获取最新的信息和示例。

  7. User

    Traceback (most recent call last): File "/usr/local/lib/python3.10/site-packages/lightbulb/app.py", line 1175, in invoke_application_command await context.invoke() File "/usr/local/lib/python3.10/site-packages/lightbulb/context/base.py", line 334, in invoke await self.command.invoke(self) File "/usr/local/lib/python3.10/site-packages/lightbulb/commands/base.py", line 801, in invoke await self(context, **kwargs) File "/usr/local/lib/python3.10/site-packages/lightbulb/commands/base.py", line 715, in call return await self.callback(context, **kwargs) TypeError: audiogen() got an unexpected keyword argument 'target'

  8. Assistant

    The error you are encountering indicates that your audiogen() function is being called with an extra, unexpected keyword argument target. When a message command is invoked, the MessageCommandContext includes a target which references the message that invoked the command. The function signature for your message command handler must accept this target argument to avoid this error.

    The lightbulb library provides decorators to implement various command types. As of my knowledge cutoff date in early 2023, when using @lightbulb.implements() decorator with multiple command types (like SlashCommand, PrefixCommand, and MessageCommand), the library does not automatically handle differences in context types for you. You typically have to write separate handlers or use some form of conditional logic within your handler to differentiate between context types.

    To address this issue, here are two approaches:

    Approach 1: Separate Handlers (Recommended) Create individual handlers for each type of command, or at least separate the MessageCommand if it requires the target argument:

    @audio_gen_plugin.command()
    @lightbulb.add_checks(lightbulb.owner_only)
    @lightbulb.add_cooldown(3, 3, lightbulb.UserBucket)
    @lightbulb.option("duration", "The duration of the audio clip", required=False, default=10)
    @lightbulb.option("negative_prompt", "The negative prompt to generate an image for", required=False)
    @lightbulb.command("audiogen", "Generate an image based on input text", pass_options=True)
    @lightbulb.implements(lightbulb.SlashCommand, lightbulb.PrefixCommand)
    async def audiogen(ctx: lightbulb.Context, negative_prompt: str = None, duration: int = 10):
        # Your command handling logic for SlashCommand and PrefixCommand
        pass
    
    @audiogen.child
    @lightbulb.command("audiogen", "Generate an image from a message", inherit_checks=True)
    @lightbulb.implements(lightbulb.MessageCommand)
    async def audiogen_message(ctx: lightbulb.MessageContext):
        # Your command handling logic for MessageCommand
        # Handle the 'target' message within this scope
        pass
    

    Approach 2: Conditional Logic Use conditional logic within a single handler to differentiate the context types:

    @lightbulb.command('audiogen', 'Generate based on text or image from message')
    @lightbulb.implements(lightbulb.SlashCommand, lightbulb.PrefixCommand, lightbulb.MessageCommand)
    async def audiogen(ctx: lightbulb.Context, negative_prompt: str = None, duration: int = 10, target: hikari.Message = None):
        # Check the context type
        if isinstance(ctx, lightbulb.SlashCommandContext) or isinstance(ctx, lightbulb.PrefixCommandContext):
            # Handle slash command or prefix command
            pass
        elif isinstance(ctx, lightbulb.MessageCommandContext):
            # Now "target" holds the message that invoked the command
            # Process the message and attachment as needed
            pass
    

    In the last example, target: hikari.Message = None allows for a target message to be passed down but has a default value of None in case a target is not applicable for the context type (such as a slash or prefix command).

    Remember to replace the stub pass statements with your actual implementation logic for each case.

    Make sure to test these changes thoroughly and consult the official hikari-lightbulb documentation for any updates or best practices regarding the handling of different command types.

  9. User

    if not ctx.event.target.attachments: error event has no target

  10. Assistant

    Apologies for the confusion. In the context of a MessageCommandContext, attachments are accessed directly from the message, not from a target property under event. The correct approach to check for and handle message attachments in a MessageCommandContext is as follows:

    @lightbulb.command('audiogen', 'Generate based on text or image from message')
    @lightbulb.implements(lightbulb.SlashCommand, lightbulb.PrefixCommand)
    async def audiogen(ctx: lightbulb.Context, negative_prompt: str = None, duration: int = 10):
        # Slash or Prefix command logic goes here
        # ...
    
    # Separate handler for the MessageCommand type
    @audiogen.child
    @lightbulb.command('audiogen', 'Generate based on text or image from message')
    @lightbulb.implements(lightbulb.MessageCommand)
    async def audiogen_message(ctx: lightbulb.MessageContext):
        # Context here is a MessageCommandContext
        message = ctx.event.message  # Get the message object from the event
        
        if not message.attachments:
            await ctx.respond("No attachment found.")
            return
        
        # Assuming that we only care about the first attachment
        attachment = message.attachments[0]
        
        if not (attachment.filename.lower().endswith(('.png', '.jpg', '.jpeg', '.gif'))):
            await ctx.respond("The attachment is not a valid image.")
            return
        
        # Now you can work with the image attachment
        # For example, download the image:
        image_data = await attachment.read()
        with open(f'./images/{attachment.filename}', 'wb') as f:
            f.write(image_data)
        
        # Send a response indicating success
        await ctx.respond(f"Image {attachment.filename} has been processed.")
    

    In this corrected code snippet, we have separated the message command logic into its own handler, audiogen_message. When this command is called due to a message (with the command), we access the message object directly from ctx.event.message.

    This is the proper way to access attachments in a MessageCommandContext. There is no target under ctx.event for a message command, rather ctx.event.message gives you the message that invoked the command and you can extract attachments from there. Then, you can perform your checks and process the attachments accordingly.

  11. User

    async with audio_gen_plugin.bot.d.aio_session as session: # 异步下载附件 async with session.get(attachment.url) as response: if response.status == 200: image_data = await response.read() # 使用BytesIO将下载的数据转换为可由Pillow处理的文件类对象 image = Image.open(io.BytesIO(image_data)) await generate_audio(image,"",10)

    Traceback (most recent call last): File "/usr/local/lib/python3.10/dist-packages/lightbulb/app.py", line 1175, in invoke_application_command await context.invoke() File "/usr/local/lib/python3.10/dist-packages/lightbulb/context/base.py", line 334, in invoke await self.command.invoke(self) File "/usr/local/lib/python3.10/dist-packages/lightbulb/commands/base.py", line 801, in invoke await self(context, **kwargs) File "/usr/local/lib/python3.10/dist-packages/lightbulb/commands/base.py", line 715, in call return await self.callback(context, **kwargs) File "/home/perlinson/文档/discord-bot/microgod-bot/extensions/audiogen.py", line 93, in audiogen await generate_audio(image,"",10) File "/home/perlinson/文档/discord-bot/microgod-bot/core/comfyui/util.py", line 114, in generate_audio outputs = await comfy_client.get_output(workflow) File "/home/perlinson/文档/discord-bot/microgod-bot/core/comfyui/client.py", line 88, in get_output async for out in self.ws: File "/usr/local/lib/python3.10/dist-packages/websockets/legacy/protocol.py", line 498, in aiter yield await self.recv() File "/usr/local/lib/python3.10/dist-packages/websockets/legacy/protocol.py", line 568, in recv await self.ensure_open() File "/usr/local/lib/python3.10/dist-packages/websockets/legacy/protocol.py", line 948, in ensure_open raise self.connection_closed_exc() websockets.exceptions.ConnectionClosedError: sent 1009 (message too big); no close frame received 中文回答下

  12. Assistant

    错误信息 websockets.exceptions.ConnectionClosedError: sent 1009 (message too big); no close frame received 表明 WebSocket 连接因为发送的消息过大而被关闭。这在 WS (WebSocket) 规范中是报错代码 1009 的意思,通常是指客户端或服务器发送了一个超过它所配置的大小限制的帧。

    在你的代码中,你正在尝试通过 WebSocket 连接发送一些数据,而这些数据超过了服务器端允许的最大帧大小。如果你不能控制服务器端的设定,那么你需要调整你的逻辑,以确保发送的数据不会超过这个限制。

    以下是你可以尝试的一些解决方案:

    1. 调整 WebSocket 消息大小限制: 如果你拥有服务器端的访问权限,你可以尝试增加消息大小限制的配置。这通常在 WebSocket 服务器的配置文件或代码中设置。

    2. 分块发送大消息: 如果增加服务器的消息大小限制不可行,你可以尝试将大消息分成多个较小的片段,然后分别发送。每个片段都需要符合大小限制。

    3. 压缩数据: 在发送之前,尝试压缩数据以减少其大小。这可能涉及到将数据压缩为 ZIP 文件或使用其他压缩算法。

    4. 检查数据类型和内容: 确认你正在发送的确切数据类型和内容。如果可能的话,去除任何不必要的数据。

    以上解决方案依赖于你的具体需求和场景。考虑到你的例子中似乎是在尝试发送图像数据,选项 2 或选项 3 可能更适合你的情况。如果图像确实很大,将其分块或先进行压缩处理可能是解决这个问题的方法。

    如果你无法改变服务器的设置或者如果数据本身无法压缩到足够小,你可能需要重新设计你的应用逻辑,以避免通过 WebSocket 发送这么大的数据。

  13. User

    ebsockets.exceptions.ConnectionClosedError: sent 1009 (message too big); no close frame received

  14. Assistant

    websockets.exceptions.ConnectionClosedError 异常表示你的 WebSocket 连接因为某种原因而被关闭了。在这种情况下,错误代码 1009 说明连接被关闭是因为发送的消息太大,也就是说你尝试发送的数据超出了服务器配置的消息大小限制。

    解决这个问题通常有以下几种方法:

    1. 增加消息大小限制:如果你控制 WebSocket 服务器的设置,那么增加服务器端的消息大小限为可能会解决问题。这可以通过修改服务器的配置文件或在创建 WebSocket 服务器实例时设置正确的参数来完成。

    2. 分割大消息:如果无法修改服务器的设置,或者你不希望增加服务器的承载,你可以尝试将大消息分割成更小的部分,然后分批发送。这样每个消息部分都会小于服务器的大小限制。

    3. 客户端尝试重新连接:如果 WebSocket 连接关闭,客户端可以设计成尝试重新连接 WebSocket 服务器。

    4. 减少消息大小:如果可能的话,尝试优化发送的数据量。例如,对于图片,你可以压缩图片或者降低分辨率。

    考虑到错误信息提到你没有收到关闭帧 (close frame),可能是发送的消息在到达服务器之前,就因为大小限制而被中断了。确保 WebSocket 连接在发送大消息之前处于打开和稳定的状态。

    根据你使用的编程语言和 WebSocket 库,具体实现可能会有所不同。如果需要进一步的帮助,请提供更多的上下文或者代码示例。

  15. User

    self.ws = await websockets.connect(self.uri)

    async for out in self.ws: try: message = json.loads(out) if message['type'] == 'execution_start': currently_Executing_Prompt = message['data']['prompt_id'] if message['type'] == 'executing' and prompt_id == currently_Executing_Prompt: data = message['data'] if data['node'] is None and data['prompt_id'] == prompt_id: break except ValueError as e: print("Incompatible response from ComfyUI");

  16. Assistant

    The code you provided seems to be part of an asynchronous WebSocket client that connects to a WebSocket server, listens for messages, and processes them accordingly.

    It looks like your client is receiving JSON messages from the server, where it's particularly interested in messages of type execution_start and executing. Based on these messages, it does some processing related to prompt_id.

    The error you mentioned earlier (websockets.exceptions.ConnectionClosedError: sent 1009 (message too big); no close frame received) seems to be triggered when attempting to send a message through the WebSocket that exceeds the size limit set by either the client or server.

    The most common causes and solutions to this problem are as follows:

    1. WebSocket Server Message Size Limit: If you control the server, increase the maximum message size setting on the WebSocket server.
    # Example: increasing the message size limit when initializing the WebSocket server
    import websockets
    
    async def server(websocket, path):
        # Server code ...
    
    start_server = websockets.serve(server, "localhost", 6789, max_size=<new_server_max_size>)
    
    # Then run the server with asyncio
    
    1. Splitting Messages: If you can't increase the server's limit or need to accommodate potential large messages, modify your client code to split large messages into smaller chunks.
    import json
    
    async def send_large_message(uri, large_data):
        async with websockets.connect(uri) as ws:
            # Assume CHUNK_SIZE is the maximum chunk size you can send
            CHUNK_SIZE = 65536  # Or whatever value is appropriate for your application
            chunks = [large_data[i:i+CHUNK_SIZE] for i in range(0, len(large_data), CHUNK_SIZE)]
            for chunk in chunks:
                await ws.send(chunk)
    
    1. Compress Data: Compress your data before sending, if possible, and decompress on the receiving end. This might include image compression or general data compression algorithms.

    2. Client Reconnection Logic: Ensure your client can handle unexpected disconnections by implementing reconnection logic.

    async def run_client(uri):
        while True:
            try:
                async with websockets.connect(uri) as ws:
                    # Client code for interacting with WebSocket
                    ...
            except websockets.ConnectionClosed:
                print("Connection closed, reconnecting...")
                await asyncio.sleep(RECONNECT_DELAY)  # Wait before reconnecting
    

    Regarding the issue with decoding JSON, it seems like your client is already handling potential ValueError exceptions, possibly due to receiving non-JSON data or incompatible JSON. As part of best practices, make sure you also handle other exceptions that may be raised within the async for loop, such as connection errors, to ensure robust operation.

    For further assistance, please provide more context on where the "message too big" error occurs within your code and any specific requirements or constraints you might have.

  17. User

    async for out in self.ws: try: message = json.loads(out) if message['type'] == 'execution_start': currently_Executing_Prompt = message['data']['prompt_id'] if message['type'] == 'executing' and prompt_id == currently_Executing_Prompt: data = message['data'] if data['node'] is None and data['prompt_id'] == prompt_id: break except ValueError as e: print("Incompatible response from ComfyUI"); 结合这个代码来修改

  18. Assistant

    了解到你已经建立了一个异步 WebSocket 客户端连接,并且在接收到的消息上得到一些期望的数据。关于WebSocket连接关闭错误(message too big),如果它是发生在发送消息的时候,你需要找到发送代码的部分来应用上面提到的潜在解决方案,例如分割大消息,或增加服务器端的大小限制。

    如果这个问题是发生在接收消息的时候,通常是服务器发送了一个超过客户端处理设定的大小的消息。不过,在你提供的代码片段中,并没有看到处理接收消息大小的逻辑。

    在websockets库中,你可以在连接时设置接收消息的最大大小。例如:

    # 设置 WebSocket 客户端的接收消息最大大小
    async with websockets.connect(uri, max_size=None) as ws:
       # 你的 WebSocket 通信逻辑
    

    在这个示例中,设置max_size=None会移除消息大小的限制。不过将不设限可能会导致其它问题,尤其是在内存管理方面。推荐的做法是根据你的应用程序需要设置一个合理的max_size。

    对于客户端无法处理大消息的问题,虽然你不能控制服务器发送给你的消息大小,你可以调整客户端来适应大的消息。

    以下是一个稍微调整过后的代码,以处理可能的连接关闭和JSON解析错误:

    import asyncio
    import json
    import websockets
    
    async def listen_websocket(uri, prompt_id):
        while True:  # Reconnection loop
            try:
                async with websockets.connect(uri, max_size=None) as ws:  # No message size limit
                    currently_Executing_Prompt = None
                    async for out in ws:
                        try:
                            message = json.loads(out)
                            if message['type'] == 'execution_start':
                                currently_Executing_Prompt = message['data']['prompt_id']
                            if message['type'] == 'executing' and prompt_id == currently_Executing_Prompt:
                                data = message['data']
                                if data['node'] is None and data['prompt_id'] == prompt_id:
                                    # 处理消息
                                    print('Received expected message')
                                    break
                        except ValueError as e:
                            print("Incompatible response from ComfyUI")
                # 正常退出循环,表示消息已处理
                break
            except websockets.ConnectionClosed as e:
                print(f"Connection closed with error: {e} -- Reconnecting...")
                await asyncio.sleep(1)  # Wait before reconnecting
            except Exception as e:  # Any other exceptions
                print(f"An unexpected error occurred: {e} -- Reconnecting...")
                await asyncio.sleep(1)  # Wait before reconnecting
    
    prompt_id_to_listen_for = "some-prompt-id"
    uri_to_connect = "ws://example.com/socket"
    
    # Start the WebSocket listening
    asyncio.run(listen_websocket(uri_to_connect, prompt_id_to_listen_for))
    

    在以上代码中,客户端连接到 WebSocket 服务器并监听消息,但没有限制接收消息的大小。(这可能需要按照你的需要进行调整。)如果连接关闭,客户端会自动尝试重新连接。

    请注意你的环境是否允许无限制的消息大小,并且在生产环境中,你可能还需要实现更复杂的错误处理机制,以及确保客户端安全和稳定地运作。

  19. User

    comfyui 自定义节点,如何才能让 节点在api 调用完的history 的outpus 里面可以看到

  20. Assistant

    ComfyUI 通常指一个用于创建用户界面的库或者框架。在这个上下文中,自定义节点不是一个典型的术语,针对ComfyUI或任何标准的API框架或服务。因此,没有标准化的答案能够完全匹配你提到的自定义节点,和如何操作API调用完的history中的outputs。

    然而,基于你的问题,如果你是在说一个特定的定制API或框架,其中节点表示API的一部分,那么要让节点的输出出现在API历史的outputs中,需要确保:

    1. 当API调用完成时,相关输出已经被存储到数据库、文件或其他类型的存储系统。
    2. API的历史或审计日志机制,能够记录每个调用,并且将结果与之关联。
    3. 自定义节点的执行必须被设计成能够将它的输出记录在可检索的地方,例如数据库。
    4. 一个额外的API端点可能需要提供,以便检索历史outputs,或者现有的端点需要能展示这些信息。

    给出一个更具体的假设例子:

    假设你有一个API端点 /execute_node,你向这个端点发送请求来触发自定义节点的执行。当执行完成后,你希望检索它的输出,这可能要通过另一个API端点比如 /get_history 来实现。

    在 自定义节点 执行完毕后,你需要一个储存机制(如数据库)来保存输出:

    def execute_custom_node(data):
        # 你的执行逻辑
        outputs = some_logic(data)
        save_outputs_to_history(outputs)  # 将输出保存到历史记录中
        return outputs
    

    当需要检索历史输出时:

    def get_history():
        # 取得API调用历史的逻辑
        history_outputs = fetch_outputs_from_storage()  # 从存储机制中获取历史输出
        return history_outputs
    

    实现上述逻辑通常需要进行数据库编程,消息队列,或状态管理。记得,为了最好地帮助你解决问题,我需要更多具体的上下文和明确你指的是哪种自定义节点和API。如果ComfyUI是特指某个具体的系统或服务,请提供更多的详情或相关文档链接。