how do I create a binary sensor in home assistant, so that a media player can show as on…
- User
how do I create a binary sensor in home assistant, so that a media player can show as on or off
- Assistant
To create a binary sensor for a media player in Home Assistant, you will need to use a template binary sensor. This will allow you to define a custom binary sensor based on the state of a media player. Here's how you can create the binary sensor:
-
Open your Home Assistant
configuration.yamlfile. -
Add the following template binary sensor configuration:
binary_sensor: - platform: template sensors: media_player_on: friendly_name: "Media Player On" device_class: power value_template: "{{ is_state('media_player.your_media_player', 'playing') }}"-
Replace
media_player.your_media_playerwith the actual entity ID of your media player. This should be available in the Developer Tools > States page of Home Assistant or listed on the Entities page under configuration. For example,media_player.spotify. -
Save the changes to your
configuration.yamlfile. -
Restart Home Assistant, either by clicking Restart within Server Controls or manually restarting the service.
-
Your new binary sensor will be available in your Home Assistant instance as
binary_sensor.media_player_on. This sensor will beonif the media player is playing andoffotherwise.
-
- User
i want it show as "on" when the media player is "playing" or "idle"
- Assistant
To create a binary sensor that shows as "on" when the media player is in either "playing" or "idle" state, you can modify the
value_templatein the binary sensor configuration. Here's an updated configuration:-
Open your Home Assistant
configuration.yamlfile. -
Add the following template binary sensor configuration:
binary_sensor: - platform: template sensors: media_player_on: friendly_name: "Media Player On" device_class: power value_template: "{{ is_state('media_player.your_media_player', 'playing') or is_state('media_player.your_media_player', 'idle') }}"-
Replace
media_player.your_media_playerwith the actual entity ID of your media player. This should be available in the Developer Tools > States page of Home Assistant or listed on the Entities page under configuration. For example,media_player.spotify. -
Save the changes to your
configuration.yamlfile. -
Restart Home Assistant, either by clicking Restart within Server Controls or manually restarting the service.
-
Your new binary sensor will be available in your Home Assistant instance as
binary_sensor.media_player_on. This sensor will beonif the media player state is "playing" or "idle", andoffotherwise.
-
- User
can you consolidate this part: "value_template: “{{ is_state(‘media_player.your_media_player’, ‘playing’) or is_state(‘media_player.your_media_player’, ‘idle’) }}”"
- Assistant
Sure! You can use the
state_attr()function to get the state of your media player and check it against both "playing" and "idle" conditions in the same line. Here's the updatedvalue_template:value_template: "{{ state_attr('media_player.your_media_player', 'state') in ['playing', 'idle'] }}"This will check whether the current state of your media player is either "playing" or "idle", making the binary sensor "on" if either of these conditions is met. Remember to replace
media_player.your_media_playerwith the actual entity ID of your media player.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.