i have following code to train a lstm model on my crypto timeseri data : %% from…
- User
i have following code to train a lstm model on my crypto timeseri data :
%%
from sklearn.preprocessing import MinMaxScaler import pandas as pd import numpy as np from tensorflow import keras import joblib from tensorflow.keras.models import Sequential from tensorflow.keras.layers import LSTM,Dense,Dropout import os
%%
csv_directory = r"C:\Users\arisa\Desktop\day_spot_summary" csv_files = [file for file in os.listdir(csv_directory) if file.endswith('.csv')] batch_size = 512
%%
def calculate_targets_min_max_params(): target_cols = [ 'y_High_1d' # , 'y_Low_1d', 'y_Priority_1d', # 'y_High_2d', 'y_Low_2d', 'y_Priority_2d', # 'y_High_3d', 'y_Low_3d', 'y_Priority_3d', # 'y_High_5d', 'y_Low_5d', 'y_Priority_5d' ] scaler = MinMaxScaler() min_vals, max_vals = None, None for csv_file in csv_files: # Read the CSV file file_path = os.path.join(csv_directory, csv_file) chunk = pd.read_csv(file_path) filtered_chunk = chunk[target_cols] if min_vals is None: min_vals = filtered_chunk.min().values max_vals = filtered_chunk.max().values else: min_vals = np.minimum(min_vals, filtered_chunk.min().values) max_vals = np.maximum(max_vals, filtered_chunk.max().values)
# Set the min and max values in scaler manually scaler.data_min_ = min_vals scaler.data_max_ = max_vals scaler.feature_range = (0, 1) scaler.fit(np.array([[0]*len(min_vals), [1]*len(min_vals)])) # Dummy fit to set attributes correctly return scaler.data_min_, scaler.data_max_%%
t_min_, t_max_ = calculate_targets_min_max_params()
%%
y_scaler = MinMaxScaler()
y_scaler.data_min_ = t_min_
y_scaler.data_max_ = t_max_
y_scaler.fit(np.array([[0]*len(t_min_), [1]*len(t_min_)])) # Dummy fit
%%
joblib.dump(y_scaler, 'nn_y_h1_minmaxscaler.sav')
%%
from tensorflow.keras.layers import BatchNormalization from tensorflow.keras.optimizers import SGD
def build_lstm_model(input_shape): model = Sequential([ LSTM(2716, activation='tanh', return_sequences=True, input_shape=input_shape), # Additional LSTM layer # LSTM(64, activation='tanh', return_sequences=True,), # Dropout(0.17), Dense(2716, activation='relu'),
Dense(32, activation='relu'), # BatchNormalization(), Dense(1), ]) optimizer = keras.optimizers.Adam(learning_rate=10) model.compile(optimizer='adam', loss='mse', # Use Mean Squared Error for regression metrics=['mae']) # Mean Absolute Error as an additional metric return model%%
x_scaler_loaded = joblib.load('nn_x_minmaxscaler.sav') y_scaler_loaded = joblib.load('nn_y_h1_minmaxscaler.sav')
%%
def data_generator_lstm( n_steps,x_scaler,y_scaler):
while True: for csv_file in csv_files: # Read the CSV file file_path = os.path.join(csv_directory, csv_file) chunk = pd.read_csv(file_path) feature_data = chunk.drop([ 'y_High_1d', 'y_Low_1d', 'y_Priority_1d', 'y_High_2d', 'y_Low_2d', 'y_Priority_2d', 'y_High_3d', 'y_Low_3d', 'y_Priority_3d', 'y_High_5d', 'y_Low_5d', 'y_Priority_5d'], axis=1) target_data = chunk[[ 'y_High_1d' # 'y_High_2d', 'y_Low_2d', 'y_Priority_2d', # 'y_High_3d', 'y_Low_3d', 'y_Priority_3d', # 'y_High_5d', 'y_Low_5d', 'y_Priority_5d' ]] feature_data_scaled = pd.DataFrame(x_scaler.transform(feature_data), columns=feature_data.columns) # Assuming target_data also needs to be scaled, apply scaler separately target_data_scaled = pd.DataFrame(y_scaler.transform(target_data), columns=target_data.columns) # ensuring end_ix does not go out of feature_data_scaled’s bounds num_samples = (len(feature_data_scaled) - n_steps) // batch_size for i in range(num_samples): start_ix = i * batch_size end_ix = start_ix + n_steps X = feature_data_scaled[start_ix:end_ix] # using .iloc to avoid KeyError, and selecting the corresponding outputs y = target_data_scaled.iloc[start_ix:end_ix].iloc[-1] yield X.values.reshape((1, n_steps, -1)), y.values.reshape((1, -1))%%
model = build_lstm_model((30, 2716))
model.summary()
%%
import warnings warnings.filterwarnings(action='ignore', message='X has feature names, but MinMaxScaler was fitted without feature names') train_generator = data_generator_lstm(30,x_scaler_loaded,y_scaler_loaded)
from tensorflow.keras.callbacks import EarlyStopping early_stopping = EarlyStopping(monitor='val_loss', patience=10, restore_best_weights=True)
Update total_samples, train_samples, and val_samples according to your dataset after transformations
model.fit( train_generator, steps_per_epoch=200, epochs=300, # callbacks=[early_stopping] # Add validation_data if you have a validation generator )
%%
model.save('lstm_1hot_extra_2716.h5')
when im fitting model the log is like: Epoch 1/300 200/200 [==============================] - 241s 1s/step - loss: 275.8762 - mae: 8.0807 Epoch 2/300 200/200 [==============================] - 227s 1s/step - loss: 216.0684 - mae: 7.8818 Epoch 3/300 200/200 [==============================] - 213s 1s/step - loss: 267.3682 - mae: 7.6443 Epoch 4/300 200/200 [==============================] - 216s 1s/step - loss: 207.7245 - mae: 7.7060 Epoch 5/300 200/200 [==============================] - 227s 1s/step - loss: 264.2340 - mae: 7.4665 Epoch 6/300 200/200 [==============================] - 208s 1s/step - loss: 206.6096 - mae: 7.7106 Epoch 7/300 200/200 [==============================] - 201s 999ms/step - loss: 263.5975 - mae: 7.5475 Epoch 8/300 200/200 [==============================] - 196s 981ms/step - loss: 199.3741 - mae: 7.4739 Epoch 9/300 200/200 [==============================] - 250s 1s/step - loss: 264.9374 - mae: 7.7277 Epoch 10/300 200/200 [==============================] - 204s 1s/step - loss: 196.4498 - mae: 7.3484 Epoch 11/300 200/200 [==============================] - 211s 1s/step - loss: 193.5252 - mae: 7.2368 Epoch 12/300 200/200 [==============================] - 209s 1s/step - loss: 261.9489 - mae: 7.7476 Epoch 13/300 40/200 [=====>........................] - ETA: 2:28 - loss: 73.8843 - mae: 6.8651
make proper changes to my code to make sure that model trains properly and loss decrease
- Assistant
Your LSTM training routine and model setup show a solid foundation, but there are a few areas to consider refining to enhance model performance and ensure a decreasing loss:
-
Learning Rate Adjustment: You used a very high learning rate (
learning_rate=10) when creating the optimizer, but eventually, you chose to use the default learning rate of Adam optimizer in thecompilemethod by specifyingoptimizer='adam'. It is advisable to use a more moderate learning rate or employ learning rate schedulers or learning rate reductions on plateau during training.- For starting, you can stick with the default learning rate of the Adam optimizer or specify a smaller value explicitly (e.g., 0.001, 0.0001).
-
Model Complexity and Overfitting: Your LSTM model seems to be quite large with its initial layer having 2716 units. Very large models are prone to overfitting especially if the dataset isn't large enough to support such complexity. Overfitting can also lead to instability in learning reflected by fluctuations or stagnation in loss.
- Consider reducing the model's complexity by decreasing the number of units in the LSTM and Dense layers.
- Implement Dropout layers effectively. It seems you've commented out Dropout in your code. Consider including it back with reasonable dropout rates (e.g., 0.2) between LSTM and Dense layers to combat overfitting.
-
Input Sequence Length and Batch Size: The chosen input sequence length and batch size should ideally represent your data's temporal dynamics properly. Misalignment can impair the learning process.
- Review the choice of
n_steps = 30to ensure it captures the relevant temporal patterns in your data. Adjusting this parameter can significantly affect model performance.
- Review the choice of
-
Normalization and Data Scaling: Ensure that all input features and target variables are scaled appropriately. Sudden drops or peaks in loss might signal discrepancies in how data is fed into the model. Since you're scaling features and the target, double-check if the scales used during training match those applied to any validation or test sets.
-
Error in Data Generator - Last Batch Issue: Your data generator is designed to yield batches of data sequentially but consider scenarios where the last batch of data does not perfectly align with your
batch_sizeandn_steps. This may lead to the last batch being smaller than expected, potentially affecting training stability.- Ensure that your generator correctly handles the final batch, possibly by padding it or discarding it if it doesn't match your specified dimensions exactly.
-
Implementation of Early Stopping and Validation Monitoring: You've commented out the Early Stopping callback. It's a good practice to utilize it to prevent overfitting and to stop training when the validation loss stops improving.
- Uncomment the EarlyStopping line and ensure you have a validation set to monitor during training. If your dataset is not explicitly split into training and validation sets, consider doing so or using a fraction of your training data as validation data.
Here's a refined approach respecting the mentioned points. Note that specific values such as layer sizes and dropout rates should be tailored according to the characteristics of your data and through experimentation:
# ... your data preparation code remains unchanged ... # Modify the build_lstm_model function def build_lstm_model(input_shape, learning_rate=0.001): model = Sequential([ LSTM(128, activation='tanh', return_sequences=True, input_shape=input_shape), Dropout(0.2), LSTM(64, activation='tanh'), Dropout(0.2), Dense(64, activation='relu'), Dropout(0.2), Dense(1), ]) optimizer = keras.optimizers.Adam(learning_rate=learning_rate) model.compile(optimizer=optimizer, loss='mse', metrics=['mae']) return model # Make sure the generator and the rest of your data preprocessing is correct # Implement EarlyStopping with a validation set early_stopping = EarlyStopping(monitor='val_loss', patience=10, restore_best_weights=True) # Assuming you have a validation_generator similar to your train_generator # Add validation_data and callbacks to your model.fit call model.fit( train_generator, steps_per_epoch=200, epochs=300, validation_data=validation_generator, validation_steps=validation_steps, callbacks=[early_stopping] )Remember to adjust your data generator for validation if necessary and review the total number of steps per epoch to align with your dataset size and batch configuration.
-
- User
what if i want to train a cnn instead of rnn
- Assistant
Training a Convolutional Neural Network (CNN) instead of a Recurrent Neural Network (RNN) for time series data is an alternative approach that's been growing in popularity, largely due to CNNs' ability to capture spatial patterns within data. While RNNs, and particularly LSTMs, are traditionally used for sequences and time series due to their ability to remember long-term dependencies, 1D CNNs can also be effective for time-series prediction tasks where the input data can be thought of as a 1-dimensional sequence.
If you're considering switching to a CNN for your crypto time series data, the primary changes will involve replacing LSTM layers with Conv1D layers. Here's how you could adjust your model to use a CNN architecture:
Adjustments for CNN
-
Input Shape: Both CNNs and RNNs require the input shape to be in the form of
[samples, time_steps, features]. No changes are needed here for using a CNN. -
Model Architecture: Replace LSTM layers with 1D convolutional layers (
Conv1D). The number of filters and the kernel size are key parameters for Conv1D layers. You'll need to experiment with these values based on your specific dataset characteristics. -
Pooling Layers: It's common to insert MaxPooling1D layers after Conv1D layers in CNNs to reduce the dimensionality of the feature maps and thus speed up computation and make the detection of higher-level features more robust.
-
Flatten or Global Pooling Layer: Before connecting to the Dense layers, you'll need to flatten the output of the last Conv1D or pooling layer, or you could use a GlobalAveragePooling1D layer to reduce the dimensions while retaining the most critical features.
Sample CNN Model for Time Series
Here's a basic example of how you could construct a CNN model for your time series data:
from tensorflow.keras.models import Sequential from tensorflow.keras.layers import Conv1D, Dense, Dropout, MaxPooling1D, GlobalAveragePooling1D def build_cnn_model(input_shape): model = Sequential([ Conv1D(filters=64, kernel_size=3, activation='relu', input_shape=input_shape), MaxPooling1D(pool_size=2), Conv1D(filters=128, kernel_size=3, activation='relu'), GlobalAveragePooling1D(), Dense(64, activation='relu'), Dropout(0.5), Dense(1) ]) model.compile(optimizer='adam', loss='mse', metrics=['mae']) return modelThis example utilizes two Conv1D layers followed by a global average pooling and dense layers. Dropout is used for regularization to prevent overfitting. You may need to adjust the number of convolutional layers, the number of filters, kernel sizes, and the dense layer sizes based on your specific problem and dataset.
Training the CNN
Training your CNN model would follow a similar process to training the LSTM model. You still need to ensure your input data is correctly preprocessed and scaled. Your data generator for feeding the model during training would remain largely unchanged, as the CNN expects data in the same shape as the RNN.
Remember, the choice between using a CNN and an LSTM heavily depends on the nature of your time series data and the specific patterns you're trying to capture. CNNs tend to be faster to train than RNNs and can be quite effective at finding patterns in data when the position of the pattern within the time series is not strictly important. Experimenting with different architectures and tuning hyperparameters will be key in finding the most effective model for your application.
-
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.