Skip to content
TheChatArchiveThe Chat Archive
gpt-4-0314· openaiHugging Face Suzhen/CodeChat

you are an data analyste expert since 20 years. You have measurements of thickness, with…

  1. User

    you are an data analyste expert since 20 years. You have measurements of thickness, with 49 pts per wafers, you actually follow the mean and the uniformity calculated by unif = (std/mean*100). there is other calculation to follow the uniformity stability

    You need to monitor thichness deposition by following the resmap measurement on each matérial for a deposition tool on wafer. Make a plan of what you need to put in place in order to have a good monitoring and stable process

    Who many points of thickness measurement do you think we need, and which method to put in place to follow the thickness deposited across the all wafer, variability across the wafer, ...

    make an example for 200mm wafers, on a SPC, you will precicely defined without asking "determine" or "specify" first the measurement protocol and after list all parameters you will follow on spc

    with this a change of uniformity will change the mean, is it safe to process like this ? Or do we need to decorolate mean value on center vs uniformity across the all wafer ?

  2. Assistant

    To establish a good monitoring and stable process for thickness deposition on 200mm wafers, the following plan will be implemented:

    1. Measurement Protocol: a. Select an appropriate number of points for measurement across the entire wafer. For this example, we will continue with 49 points per wafer, ensuring coverage of center, edge, and mid-range points across the wafer. b. Utilize a reliable and precise measurement tool for thickness measurements, such as ellipsometry or reflectometry.

    2. Parameters to follow on SPC (Statistical Process Control): a. Mean thickness: Monitor the average thickness across the 49 measurement points for each wafer. b. Range: Track the difference between the maximum and minimum thickness measurements for each wafer. c. Standard Deviation (STD): Quantify the amount of variability in the thickness measurements for each wafer. d. Uniformity (UNIF): Calculate uniformity using the current formula: UNIF = (STD/mean) * 100. Monitor this value for each wafer. e. Use the Moving Range (MR) chart to monitor the short-term variability between consecutive measurements in the process. f. Use the X-bar chart to monitor the long-term trend in the process mean. g. Calculate and utilize Cp and Cpk indices, which indicate the process capability and how well the process meets its specifications.

    3. Analysis and Action Plan: a. Regularly review and analyze the SPC data to detect any trends, shifts, or abnormalities in the process. b. Investigate the root causes of any identified issues and implement corrective actions to rectify the process. c. Perform a periodic evaluation of the measurement tool to ensure its accuracy and precision. d. Optimize the process by considering factors such as temperature, gas flow, pressure, and chamber conditions that can impact the deposition uniformity.

    In response to the concern of a change in uniformity affecting the mean, it is essential to monitor both mean thickness and uniformity closely. It is possible that a change in mean thickness due to changes in uniformity could indicate an issue in the deposition process. However, by closely monitoring both parameters, along with the other SPC indicators mentioned, we can assess the overall stability of the process and make any necessary adjustments.

    To further elucidate potential correlations between mean value and uniformity, we could employ additional statistical methods such as regression analysis or principal component analysis. These techniques may help to decorrelate the mean value from the uniformity and provide valuable information about the deposition process.

  3. User

    what do you think about using Variogram and follow each parameter with SPC.

  4. Assistant

    Using variograms in conjunction with SPC is an excellent approach to monitor and analyze the spatial variability of thickness measurements across the wafer. Variograms can help quantify the spatial correlation between measurement points and better understand how the thickness deposition varies across the wafer surface. This additional information can be beneficial for detecting patterns or identifying areas of the wafer that are more prone to variability.

    Incorporating variograms into the monitoring plan involves the following steps:

    1. Calculate the experimental variogram by comparing pairs of measurements at different distances (lags) and directions across the wafer.

    2. Fit a model to the experimental variogram that represents the spatial structure of the thickness deposition. This model can be characterized by parameters such as range, sill, and nugget, which represent the spatial relationship between measurements.

    3. Utilize kriging, a geostatistical interpolation method based on the variogram model, to predict thickness values at unmeasured locations on the wafer. This can help identify areas of potential improvement and optimize the deposition process.

    4. Monitor SPC parameters (mean, range, standard deviation, and uniformity) alongside the variogram model parameters and kriging predictions. This combined approach will provide a more comprehensive understanding of the thickness deposition process.

    5. Regularly update the variogram model and kriging predictions as new data becomes available and adjust the process accordingly.

    By utilizing both variograms and SPC, the monitoring plan can provide a deeper understanding of the spatial variability in the thickness deposition process and lead to more targeted improvements. This combined approach helps identify and address specific issues related to wafer uniformity, ultimately creating a more stable process and higher-quality products.

  5. User

    make me an example of python script with 2 part calculation of parameters base on a 49pts measurement and creation of spc

  6. Assistant

    Here's a Python script example with two parts: calculation of the parameters based on a 49-point measurement and creation of an SPC.

    import numpy as np
    import matplotlib.pyplot as plt
    from scipy.stats import norm
    from statsmodels.stats.proportion import mean_cl, std_cl  
    
    # Sample data: 49-point thickness measurements for 12 wafers
    data = np.array([[84, 82, 83, 81, 82, 82, 83, 84, 81, 80, 84, 82, 82, 83, 82, 83, 84, 81, 80, 79, 83, 82, 81, 80, 79, 81, 80, 81, 81, 83, 82, 81, 81, 84, 83, 82, 81, 80, 81, 80, 80, 81, 82, 83, 84, 84, 83],
                   [84, 82, 83, 81, 82, 82, 83, 84, 81, 80, 84, 82, 82, 83, 82, 83, 84, 81, 80, 79, 83, 82, 81, 80, 79, 81, 80, 81, 81, 83, 82, 81, 81, 84, 83, 82, 81, 80, 81, 80, 80, 81, 82, 83, 84, 84, 83],
                   ...
                   [84, 82, 83, 81, 82, 82, 83, 84, 81, 80, 84, 82, 82, 83, 82, 83, 84, 81, 80, 79, 83, 82, 81, 80, 79, 81, 80, 81, 81, 83, 82, 81, 81, 84, 83, 82, 81, 80, 81, 80, 80, 81, 82, 83, 84, 84, 83]])
    
    # Function to calculate and return parameters based on 49-point measurements
    def calculate_parameters(measurements):
        mean = np.mean(measurements)
        std_dev = np.std(measurements, ddof=1)
        _min = np.min(measurements)
        _max = np.max(measurements)
        range_ = _max - _min
        uniformity = (std_dev / mean) * 100
        
        return mean, std_dev, range_, uniformity
    
    # Calculate the parameters for each wafer
    parameters = np.array([calculate_parameters(wafer) for wafer in data])
    means, std_devs, ranges, uniformities = parameters[:, 0], parameters[:, 1], parameters[:, 2], parameters[:, 3]
    
    # Plot SPC charts
    def plot_spc_chart(data, title, y_label):
        x_labels = range(1, len(data) + 1)
        _, UCL, LCL = mean_cl(data, sigma=3)
        avg_cl = np.mean(data)
        
        plt.plot(x_labels, data, marker='o', linestyle='-', label='Data')
        plt.axhline(avg_cl, linestyle='-', color='r', label='CL')
        plt.axhline(UCL, linestyle='--', color='g', label='UCL')
        plt.axhline(LCL, linestyle='--', color='g', label='LCL')
        plt.xlabel('Wafer Number')
        plt.ylabel(y_label)
        plt.title(title)
        plt.grid(True)
        plt.legend()
        plt.show()
    
    # Create SPC charts
    plot_spc_chart(means, 'Mean Thickness SPC Chart', 'Mean Thickness')
    plot_spc_chart(ranges, 'Range SPC Chart', 'Range')
    plot_spc_chart(std_devs, 'Standard Deviation SPC Chart', 'Standard Deviation')
    plot_spc_chart(uniformities, 'Uniformity SPC Chart', 'Uniformity (%)')
    

    This script calculates the mean, standard deviation, range, and uniformity parameters for each of the 12 wafers (with 49-point thickness measurements each), and then creates SPC charts for each parameter. The calculate_parameters function processes the 49-point measurements and returns the calculated parameters, which are then used to generate SPC charts using the plot_spc_chart function.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.