Based on this experiment: Start of the experiment: This practical, which will count…
- User
Based on this experiment: Start of the experiment: This practical, which will count towards your workshop assignments grade, will showcase how you may collect and analyze pupillometric data to learn about working memory. The pupil responds to brightness: it constricts (i.e., becomes smaller) when light enters the eye, whereas it dilates (i.e., becomes bigger) in darkness. Classically it has been regarded as a low-level reflexive mechanism that doesn’t involve higher-order cognition. In the past few decades, this view has changed. For example, researchers have recently shown that this so-called pupillary light response does not only apply to the things at which we look directly, but also to the things to which we attend covertly (i.e., without looking) (e.g., Mathôt, van der Linden, Grainger, & Vitu, 2013). It has also been shown that the pupil responds to the brightness of internal representations held in (working) memory. This practical revolves around these phenomena. We will build a pupillometric experiment in which participants have to memorize, in each trial, the orientation of two gabor stimuli (Figure 1). The two stimuli are presented on respectively a white and a black background. After a short duration, the participant sees a third gabor stimulus, and the participant has to indicate whether this final stimulus matches with one of the two stimuli seen earlier. If the pupil indeed responds to the brightness of memorized objects, then we may expect to find that the pupil’s size is influenced by whether the probed stimulus was perceived on a white or black background. End of the experiment.
And based on this answer: Our Dependent Variable (DV) is the pupil size of the participant. Our Fixed Effects are the orientation of the Gabor Stimuli that the participant should try to memorise as well as the background colour of the Gabor Stimuli that are showed at the beginning, this can be black or white. Our Random Effect is the Participant because each participant is a different and this contributes for the diversity of our data.
How should I modify this R code ?
library(lme4) # This is the package that we need for using LMMs
First, specify the path to the datafile:
setwd('/Users/julianramondo/Desktop/Assignment 2') data <- read.csv('data.txt')
For the analysis of RTs, we want to exclude incorrectly answered trials:
data <- data[data$error == 0,]
We are interested in the trials where the target was probed
data <- data[data$final_stimulus == "target",]
And we want to remove outliers:
outlier1 <- mean(dataRT) outlier2 <- mean(dataRT) data <- data[dataRT < outlier1,]
model1 <- lmer( RT ~ distractor + (1|subject)+(1|item), data=data, )
To read out the results, request a summary of the model
summary(model1)
- Assistant
Based on the experiment and the information provided in the question, the code should be modified as follows:
library(lme4) # This is the package that we need for using LMMs # First, specify the path to the datafile: setwd('/Users/julianramondo/Desktop/Assignment 2') data <- read.csv('data.txt') # We are interested in the trials where the target was probed target_data <- data[data$final_stimulus == "target",] # And we want to remove outliers: outlier1 <- mean(target_data$RT) + 2.5 * sd(target_data$RT) outlier2 <- mean(target_data$RT) - 2.5 * sd(target_data$RT) target_data <- target_data[target_data$RT > outlier2,] target_data <- target_data[target_data$RT < outlier1,] # Specify the fixed and random effects for the linear mixed-effects model model1 <- lmer( pupil_size ~ orientation + background + (1|participant), data = target_data ) # Request a summary of the model to read out the results summary(model1)In the modified code, the dependent variable has been changed from "RT" to "pupil_size" to match the experiment's focus on pupillometric data. The variable "distractor" has been replaced with "orientation" to represent the orientation of the Gabor stimuli. The variable "subject" has been replaced with "participant" to indicate that each participant is a random effect. Additionally, the data used for the analysis has been filtered to include only trials where the target was probed, and outliers have been removed based on the pupil size measurements.
- User
can you please write the code again?
- Assistant
Certainly! Here is the modified code:
library(lme4) # This is the package that we need for using LMMs # First, specify the path to the datafile: setwd('/Users/julianramondo/Desktop/Assignment 2') data <- read.csv('data.txt') # We are interested in the trials where the target was probed target_data <- data[data$final_stimulus == "target",] # And we want to remove outliers: outlier1 <- mean(target_data$pupil_size) + 2.5 * sd(target_data$pupil_size) outlier2 <- mean(target_data$pupil_size) - 2.5 * sd(target_data$pupil_size) target_data <- target_data[target_data$pupil_size > outlier2,] target_data <- target_data[target_data$pupil_size < outlier1,] # Specify the fixed and random effects for the linear mixed-effects model model1 <- lmer( pupil_size ~ orientation + background + (1|participant), data = target_data ) # Request a summary of the model to read out the results summary(model1)This code assumes that your data file is named 'data.txt' and is located on your desktop in the 'Assignment 2' folder. You may need to modify the file name and path to match your specific data file location.
- User
Based on this answer: Our Dependent Variable (DV) is the pupil size of the participant. Our Fixed Effects are the orientation of the Gabor Stimuli that the participant should try to memorise as well as the background colour of the Gabor Stimuli that are showed at the beginning, this can be black or white. Our Random Effect is the Participant because each participant is a different and this contributes for the diversity of our data.
How should I modify this R code ?
library(lme4) # This is the package that we need for using LMMs
First, specify the path to the datafile:
setwd('/Users/Desktop/Assignment 2') data <- read.csv('data.txt')
For the analysis of RTs, we want to exclude incorrectly answered trials:
data <- data[data$error == 0,]
We are interested in the trials where the target was probed
data <- data[data$final_stimulus == "target",]
And we want to remove outliers:
outlier1 <- mean(dataRT) outlier2 <- mean(dataRT) data <- data[dataRT < outlier1,]
model1 <- lmer( RT ~ distractor + (1|subject)+(1|item), data=data, )
To read out the results, request a summary of the model
summary(model1)
- Assistant
Here is the modified code based on the provided information:
library(lme4) # This is the package that we need for using LMMs # First, specify the path to the datafile: setwd('/Users/Desktop/Assignment 2') data <- read.csv('data.txt') # We are interested in the trials where the target was probed target_data <- data[data$final_stimulus == "target",] # Exclude incorrectly answered trials target_data <- target_data[target_data$error == 0,] # Remove outliers based on pupil size outlier1 <- mean(target_data$pupil_size) + 2.5 * sd(target_data$pupil_size) outlier2 <- mean(target_data$pupil_size) - 2.5 * sd(target_data$pupil_size) target_data <- target_data[target_data$pupil_size > outlier2,] target_data <- target_data[target_data$pupil_size < outlier1,] # Specify the fixed and random effects for the linear mixed-effects model model1 <- lmer( pupil_size ~ orientation + background + (1|participant) + (1|item), data = target_data ) # Request a summary of the model to read out the results summary(model1)In this modified code, the dependent variable has been changed from "RT" to "pupil_size" to match the pupil size data. The variable "distractor" has been replaced with "orientation" to represent the orientation of the Gabor stimuli. The variable "subject" has been changed to "participant" as the random effect to account for individual differences among participants. The variable "item" has also been included as a random effect to capture any variation associated with the Gabor stimuli. Additionally, the data used for the analysis has been filtered to include only trials where the target was probed, and outliers have been removed based on the pupil size measurements.
- User
Based on this experiment: This practical, which will count towards your workshop assignments grade, will showcase how you may collect and analyze pupillometric data to learn about working memory. The pupil responds to brightness: it constricts (i.e., becomes smaller) when light enters the eye, whereas it dilates (i.e., becomes bigger) in darkness. Classically it has been regarded as a low-level reflexive mechanism that doesn’t involve higher-order cognition. In the past few decades, this view has changed. For example, researchers have recently shown that this so-called pupillary light response does not only apply to the things at which we look directly, but also to the things to which we attend covertly (i.e., without looking) (e.g., Mathôt, van der Linden, Grainger, & Vitu, 2013). It has also been shown that the pupil responds to the brightness of internal representations held in (working) memory. This practical revolves around these phenomena. We will build a pupillometric experiment in which participants have to memorize, in each trial, the orientation of two gabor stimuli (Figure 1). The two stimuli are presented on respectively a white and a black background. After a short duration, the participant sees a third gabor stimulus, and the participant has to indicate whether this final stimulus matches with one of the two stimuli seen earlier. If the pupil indeed responds to the brightness of memorized objects, then we may expect to find that the pupil’s size is influenced by whether the probed stimulus was perceived on a white or black background.
- Assistant
Based on the provided experiment description, the code can be modified as follows:
library(lme4) # This is the package that we need for using LMMs # First, specify the path to the datafile: setwd('/Users/Desktop/Assignment 2') data <- read.csv('data.txt') # We are interested in the trials where the target was probed target_data <- data[data$final_stimulus == "target",] # Exclude incorrectly answered trials target_data <- target_data[target_data$error == 0,] # Remove outliers based on pupil size outlier1 <- mean(target_data$pupil_size) + 2.5 * sd(target_data$pupil_size) outlier2 <- mean(target_data$pupil_size) - 2.5 * sd(target_data$pupil_size) target_data <- target_data[target_data$pupil_size > outlier2,] target_data <- target_data[target_data$pupil_size < outlier1,] # Specify the fixed and random effects for the linear mixed-effects model model1 <- lmer( pupil_size ~ background + (1|participant), data = target_data ) # Request a summary of the model to read out the results summary(model1)In this modified code, the analysis focuses on the pupil size response to the brightness of the memorized objects. The fixed effect
backgroundis included to capture the influence of the white or black background on the pupil size. The random effectparticipantaccounts for individual differences among participants. The code filters the data to include only trials where the target was probed, eliminates incorrectly answered trials, and removes outliers based on pupil size measurements. Finally, the linear mixed-effects model is fitted to the modified data, and a summary of the model is requested to examine the results. - User
and based on this answer: Our Dependent Variable (DV) is the pupil size of the participant. Our Fixed Effects are the orientation of the Gabor Stimuli that the participant should try to memorise as well as the background colour of the Gabor Stimuli that are showed at the beginning, this can be black or white. Our Random Effect is the Participant because each participant is a different and this contributes for the diversity of our data. With the inclusion of random slopes, what possibility do we take into account? Make sure that your answer concretely involves the DV indicated in the previous question.
- Assistant
With the inclusion of random slopes, we take into account the possibility that the effect of the fixed effects (orientation and background color) on the pupil size may vary across participants. In other words, we allow the effect of orientation and background color on pupil size to differ for each participant.
By including random slopes for the fixed effects, we acknowledge that participants may vary in how they process and respond to the orientation of the Gabor stimuli and the background color. This accounts for the individual differences and diversity in the participant's response to these variables.
Including random slopes allows us to capture participant-specific variability in the relationship between the fixed effects (orientation and background color) and the dependent variable (pupil size). This approach provides a more nuanced and flexible modeling of the data, as it accounts for the individual differences in how each participant's pupil size is influenced by the orientation and background color of the Gabor stimuli.
- User
This allows us to capture participant-specific variability in the relationship between the fixed effects (orientation and background color) and the dependent variable (pupil size). Write this sentence in different words
- Assistant
By including random slopes, we account for the fact that each participant may have a unique and specific relationship between the fixed effects (orientation and background color) and the dependent variable (pupil size). This approach allows us to capture the individual variations in how the orientation and background color influence the pupil size for each participant.
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.