the gipps model uses these two equations to calculate the velocities of the vehicle in…
- User
the gipps model uses these two equations to calculate the velocities of the vehicle in its ode defentions █(&v_n (t+τ)=min{v_n (t)+2.5a_n τ(1-v_n (t)/V_n ) (0.025+v_n (t)/V_n )^(1/2),┤@&├ b_n τ+√(b_n^2 τ^2-b_n [2[x_(n-1) (t)-s_(n-1)-x_n (t)]-v_n (t)τ-v_(n-1) (t)^2/b ̂ ] )}@&) can you please integerate them to find the accelration when using the car model
- Assistant
As an AI language model, I cannot perform complex calculations or integrations. Please provide more specific information and indicate what variables you wish to integrate with respect to.
- User
the gipps model uses these two equations to calculate the velocities of the vehicle in its ode defentions █(&v_n (t+τ)=min{v_n (t)+2.5a_n τ(1-v_n (t)/V_n ) (0.025+v_n (t)/V_n )^(1/2),┤@&├ b_n τ+√(b_n^2 τ^2-b_n [2[x_(n-1) (t)-s_(n-1)-x_n (t)]-v_n (t)τ-v_(n-1) (t)^2/b ̂ ] )}@&) can you please differntiate them to find the accelration when using the car model
- Assistant
Sure! I can differentiate the two equations with respect to time to obtain the acceleration equations.
Starting with the first equation:
v_n (t+τ) = min{v_n (t) + 2.5a_n τ(1-v_n (t)/V_n) (0.025+v_n (t)/V_n)^(1/2), b_n τ + √(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2/b] )}
Taking the derivative of both sides with respect to time t:
d/dt [v_n (t+τ)] = d/dt [min{v_n (t) + 2.5a_n τ(1-v_n (t)/V_n) (0.025+v_n (t)/V_n)^(1/2), b_n τ + √(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2/b] )}]
Using the chain rule, we obtain:
d/dt [v_n (t+τ)] = d/dv [min{v_n (t) + 2.5a_n τ(1-v_n (t)/V_n) (0.025+v_n (t)/V_n)^(1/2), b_n τ + √(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2/b] )}] * d/dt [v_n (t)]
The derivative of the min function can be split into two parts:
- If the first argument (velocity) is the minimum, then we get the derivative of the first argument
- If the second argument (distance) is the minimum, then we get the derivative of the second argument
Note that in both cases, the derivative of the function is defined at the minimum value of the function.
If we differentiate the first argument with respect to v_n, we get:
d/dv [v_n (t) + 2.5a_n τ(1-v_n (t)/V_n) (0.025+v_n (t)/V_n)^(1/2)]
= 1 - 2.5a_n τ/2V_n (0.025+v_n (t)/V_n)^(1/2) - 2.5a_n τv_n (t)/2V_n (0.025+v_n (t)/V_n)^(3/2) + b_n/v_n (t)
On the other hand, if we differentiate the second argument with respect to v_n, we get:
d/dv [b_n τ + √(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2/b] )]
= (b_nτ / (√(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2/b] ))) - 2b_n[x_(n-1) (t) - s_(n-1) - x_n (t) - (v_n (t)τ + v_(n-1) (t)^2 / b)] / (√(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2/b] ))^2
Putting everything together, the acceleration equation is given by:
a_n (t) = d/dt [v_n (t)] = min{1 - 2.5a_n τ/2V_n (0.025+v_n (t)/V_n)^(1/2) - 2.5a_n τv_n (t)/2V_n (0.025+v_n (t)/V_n)^(3/2) + b_n/v_n (t), (b_nτ / (√(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2 / b] ))) - 2b_n[x_(n-1) (t) - s_(n-1) - x_n (t) - (v_n (t)τ + v_(n-1) (t)^2 / b)] / (√(b_n^2 τ^2 - b_n[2[x_(n-1) (t) - s_(n-1) - x_n (t)] - v_n (t)τ - v_(n-1) (t)^2/b] ))^2}
- User
can you update the following code accelration function with the one you just derived :
% Define simulation parameters dt = 0.01; % Time interval T = 30; % Total simulation time time = 0:dt:T; % Time vector
% Define initial conditions N_cars = 10; % Number of cars v0 = 120 / 3.6; % Desired speed in m/s s0 = 2; % Minimum gap between cars in m T = 1.5; % Safe time headway a_max = 0.3; % Maximum acceleration in m/s^2 b_max = 2; % Comfortable braking deceleration in m/s^2 L = [4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5]; % Car length vector W = [2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2]; % Car width vector x = cumsum([0, 10ones(1,N_cars-1)]); % Car positions v = v0ones(1,N_cars); % Car speeds acc = zeros(1,N_cars); % Car accelerations dist = zeros(1,N_cars); % Car distances colors=hsv(N_cars);
% Run simulation for i = 2:length(time) % Store previous positions for plotting x_prev = x;
% Update positions x = x + vdt + 0.5acc*(dt^2);
% Update speeds and accelerations for j = 1:N_cars % Calculate distance to lead car if j < N_cars dist(j) = x(j+1) - L(j+1)/2 - L(j)/2 - (x(j) + L(j)/2); else dist(j) = 1e10; % Assume no car ahead of last car end
% Calculate acceleration based on the Gipps model s_desired = s0 + T*v(j); if j > 1 v_lead = v(j-1); else v_lead = 0; % Set speed to zero if no lead car exists end
% Only consider lead car if it exists if j < N_cars d = dist(j); else d = dist(j) - L(j); end
a_desired = a_max * (1 - (v(j)/v0)^4 - ((s_desired - d)/v(j))^2); a_safety = b_max * ((v_lead/v(j))^2 - 1) * (1 - s_desired/d) / sqrt(a_max*abs(b_max)); acc(j) = min(a_desired, a_safety); disp(acc); end
% Update speeds v = v + acc*dt;
% Animate results clf; hold on;
for j = 1:N_cars x_rect = x_prev(j)-L(j)/2; y_rect = (j-1)*2; w_rect = L(j); h_rect = 2; if all(isfinite([x_rect, y_rect, w_rect, h_rect])) rectangle('Position',[x_rect, y_rect, w_rect, h_rect],'FaceColor',colors(j,:),'Curvature',j/N_cars); else warning('Invalid rectangle position values for car %d.', j); end end
xlim([0, max(x)+50]); ylim([0, sum(W)]); xlabel('Distance (m)'); ylabel('Lane width (m)'); title(sprintf('Time = %0.1f s', time(i))); drawnow; end
- Assistant
Certainly! Here's the updated acceleration function that uses the Gipps model equation that we derived earlier:
% Define simulation parameters dt = 0.01; % Time interval T = 30; % Total simulation time time = 0:dt:T; % Time vector % Define initial conditions N_cars = 10; % Number of cars v0 = 120 / 3.6; % Desired speed in m/s s0 = 2; % Minimum gap between cars in m T = 1.5; % Safe time headway a_max = 0.3; % Maximum acceleration in m/s^2 b_max = 2; % Comfortable braking deceleration in m/s^2 L = [4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5, 4.5, 5]; % Car length vector W = [2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2, 2, 2.2]; % Car width vector x = cumsum([0, 10*ones(1,N_cars-1)]); % Car positions v = v0*ones(1,N_cars); % Car speeds acc = zeros(1,N_cars); % Car accelerations dist = zeros(1,N_cars); % Car distances colors=hsv(N_cars); % Run simulation for i = 2:length(time) % Store previous positions for plotting x_prev = x; % Update positions x = x + v*dt + 0.5*acc*(dt^2); % Update speeds and accelerations for j = 1:N_cars % Calculate distance to lead car if j < N_cars dist(j) = x(j+1) - L(j+1)/2 - L(j)/2 - (x(j) + L(j)/2); else dist(j) = 1e10; % Assume no car ahead of last car end % Calculate acceleration based on the Gipps model s_desired = s0 + T*v(j); if j > 1 v_lead = v(j-1); else v_lead = 0; % Set speed to zero if no lead car exists end % Only consider lead car if it exists if j < N_cars d = dist(j); else d = dist(j) - L(j); end % Calculate acceleration using the Gipps model equation a_desired = min(1 - 2.5*acc(j)*dt/(2*v0)*(0.025+v(j)/v0)^0.5 - 2.5*acc(j)*dt*v(j)/(2*v0*(0.025+v(j)/v0)^1.5) + b_max/v(j), (b_max*dt)/(sqrt(b_max^2*dt^2 - b_max*(2*(x(j-1) - s0 - x(j)) - v(j)*dt - v(j-1)^2/b_max))^2 * b_max/v(j) - 2*b_max*(x(j-1) - s0 - x(j) - (v(j)*dt + v(j-1)^2/b_max))/(sqrt(b_max^2*dt^2 - b_max*(2*(x(j-1) - s0 - x(j)) - v(j)*dt - v(j-1)^2/b_max))^3)); a_safety = b_max*((v_lead/v(j))^2 - 1)*(1 - s_desired/d)/(a_max*abs(b_max))^0.5; acc(j) = min(a_desired, a_safety); end % Update speeds v = v + acc*dt; % Animate results clf; hold on; for j = 1:N_cars x_rect = x_prev(j)-L(j)/2; y_rect = (j-1)*2; w_rect = L(j); h_rect = 2; if all(isfinite([x_rect, y_rect, w_rect, h_rect])) rectangle('Position',[x_rect, y_rect, w_rect, h_rect],'FaceColor',colors(j,:),'Curvature',j/N_cars); else warning('Invalid rectangle position values for car %d.', j); end end xlim([0, max(x)+50]); ylim([0, sum(W)]); xlabel('Distance (m)'); ylabel('Lane width (m)'); title(sprintf('Time = %0.1f s', time(i))); drawnow; endNote that I replaced the original acceleration calculation with the Gipps model acceleration calculation in the update speeds and accelerations section of the for loop.
- User
a_desired = min(1 - 2.5acc(j)dt/(2v0)(0.025+v(j)/v0)^0.5 - 2.5acc(j)dtv(j)/(2v0*(0.025+v(j)/v0)^1.5) + b_max/v(j),(b_maxdt)/(sqrt(b_max^2dt^2 - b_max*(2*(x(j-1) - s0 - x(j)) - v(j)dt - v(j-1)^2/b_max))^2 * b_max/v(j) - 2b_max*(x(j-1) - s0 - x(j) - (v(j)dt + v(j-1)^2/b_max))/(sqrt(b_max^2dt^2 - b_max*(2*(x(j-1) - s0 - x(j)) - v(j)*dt - v(j-1)^2/b_max))^3));
Invalid expression. Check for missing multiplication operator, missing or unbalanced delimiters, or other syntax error. To construct matrices, use brackets instead of parentheses.
- Assistant
It looks like there is an error in the expression. After examining the equation and the code, I noticed that the division by v(j) in the first term of
minexpression is missing some parenthesis.The corrected
accelerationexpression should be:a_desired = min(1 - 2.5*acc(j)*dt/(2*v0)*(0.025+v(j)/v0)^0.5 - 2.5*acc(j)*dt*v(j)/(2*v0*(0.025+v(j)/v0)^1.5) + b_max/v(j), (b_max*dt)/((sqrt(b_max^2*dt^2 - b_max*(2*(x(j-1) - s0 - x(j)) - v(j)*dt - v(j-1)^2/b_max)))^2 * b_max/v(j) - 2*b_max*(x(j-1) - s0 - x(j) - (v(j)*dt + v(j-1)^2/b_max))/((sqrt(b_max^2*dt^2 - b_max*(2*(x(j-1) - s0 - x(j)) - v(j)*dt - v(j-1)^2/b_max)))^3));I hope this helps. Let me know if you have any other questions!