Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0613· openaiHugging Face Suzhen/CodeChat

embedDataInBlock[block, dataBit, mask, inverseMask, luminanceCoefficients, alpha] :=…

  1. User

    embedDataInBlock[block_, dataBit_, mask_, inverseMask_, luminanceCoefficients_, alpha_] := Module[{blockData, flattenB1, flattenB0, lumB1, lumB0, deltaLum, deltaB, deltaArray}, blockData = ImageData[block, "Byte"]; flattenB1 = Flatten[blockDatamask, 1]; flattenB0 = Flatten[blockDatainverseMask, 1]; lumB1 = Mean[Dot[flattenB1, luminanceCoefficients]]; lumB0 = Mean[Dot[flattenB0, luminanceCoefficients]]; deltaLum = 0; If[dataBit == 1 && lumB0 - lumB1 <= alpha, deltaLum = alpha + 1 - (lumB0 - lumB1); deltaB = deltaLum*luminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]inverseMask; blockData += deltaArray;]; If[dataBit == 0 && lumB0 - lumB1 >= -alpha, deltaLum = -alpha - 1 - (lumB0 - lumB1); deltaB = deltaLumluminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]*inverseMask; blockData += deltaArray;]; (Print["Яркость с маской 1: ",lumB1,", Яркость с маской 0: ", lumB0,", Разница в яркости (deltaLum): ",deltaLum, ", Встраиваемый бит: ",dataBit]) Image[Clip[Round[blockData], {0, 255}], "Byte"]]; stegoBlocks = blocks; Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++;], {j, Length[stegoBlocks[[1]]]}, {i, Length[stegoBlocks]}]; stegoImage1 = ImageAssemble[stegoBlocks]; исправь стего путь на Последовательно, непрерывно, по строкам.

  2. Assistant

    embedDataInBlock[block_, dataBit_, mask_, inverseMask_, luminanceCoefficients_, alpha_] := Module[{blockData, flattenB1, flattenB0, lumB1, lumB0, deltaLum, deltaB, deltaArray}, blockData = ImageData[block, "Byte"]; flattenB1 = Flatten[blockDatamask, 1]; flattenB0 = Flatten[blockDatainverseMask, 1]; lumB1 = Mean[Dot[flattenB1, luminanceCoefficients]]; lumB0 = Mean[Dot[flattenB0, luminanceCoefficients]]; deltaLum = 0; If[dataBit == 1 && lumB0 - lumB1 <= alpha, deltaLum = alpha + 1 - (lumB0 - lumB1); deltaB = deltaLum*luminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]inverseMask; blockData += deltaArray;]; If[dataBit == 0 && lumB0 - lumB1 >= -alpha, deltaLum = -alpha - 1 - (lumB0 - lumB1); deltaB = deltaLumluminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]*inverseMask; blockData += deltaArray;]; Image[Clip[Round[blockData], {0, 255}], "Byte"] ];

    stegoBlocks = ConstantArray[0, Dimensions[blocks]]; cvzIndex = 1; Do[ If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[blocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++]; , {i, 1, Length[blocks]}, {j, 1, Length[blocks[[1]]]} ];

    stegoImage1 = ImageAssemble[stegoBlocks];

  3. User

    обьясни эту часть кода Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++;], {j, Length[stegoBlocks[[1]]]}, {i, Length[stegoBlocks]}];

  4. Assistant

    Эта часть кода выполняет цикл для встраивания данных в каждый блок изображения.

    Цикл Do проходит по каждому столбцу j и каждой строке i в матрице stegoBlocks, которая представляет собой изображение, разбитое на блоки.

    Внутри цикла выполняется условное выражение If, которое проверяет, что cvzIndex (индекс встраиваемых данных) меньше или равен cvzLength (длина встраиваемых данных). Если это условие выполняется, то вызывается функция embedDataInBlock, которая встраивает данные CVZ[[cvzIndex]] (взятые из массива CVZ) в блок изображения stegoBlocks[[i, j]].

    После встраивания данных, cvzIndex увеличивается на единицу, чтобы перейти к следующим данным для встраивания.

    Таким образом, в результате выполнения данной части кода, данные из массива CVZ встраиваются в каждый блок изображения stegoBlocks.

  5. User

    измени его с Последовательно, непрерывно, по столбцам на Последовательно, непрерывно, по строкам.

  6. Assistant

    Sure, here's the modified code with the loop iterating sequentially, continuously, row by row:

    stegoBlocks = ConstantArray[0, Dimensions[blocks]];
    cvzIndex = 1;
    Do[
      If[cvzIndex <= cvzLength, 
       stegoBlocks[[i, j]] = 
        embedDataInBlock[blocks[[i, j]], CVZ[[cvzIndex]], mask, 
         inverseMask, luminanceCoefficients, alpha];
       cvzIndex++];
      , {j, 1, Length[stegoBlocks[[1]]]}, {i, 1, Length[stegoBlocks]}
    ];
    
    stegoImage1 = ImageAssemble[stegoBlocks];
    

    In this modified code, the outer loop j iterates over the columns from 1 to the length of the first row of stegoBlocks, and the inner loop i iterates over the rows from 1 to the length of stegoBlocks. This ensures that the iteration goes sequentially, continuously, row by row.

  7. User

    Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++;], {j, Length[stegoBlocks[[1]]]}, {i, Length[stegoBlocks]}]; измени его с Последовательно, непрерывно, по столбцам на Последовательно, непрерывно, по строкам.

  8. Assistant

    Certainly! Here's the modified code where the loop iterates sequentially, continuously, row by row:

    stegoBlocks = ConstantArray[0, Dimensions[blocks]];
    cvzIndex = 1;
    Do[
      If[cvzIndex <= cvzLength, 
       stegoBlocks[[i, j]] = 
        embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, 
         inverseMask, luminanceCoefficients, alpha];
       cvzIndex++];
      , {i, 1, Length[stegoBlocks]}, {j, 1, Length[stegoBlocks[[1]]]}
    ];
    
    stegoImage1 = ImageAssemble[stegoBlocks];
    

    In this modified code, the outer loop i iterates over the rows from 1 to the length of stegoBlocks, and the inner loop j iterates over the columns from 1 to the length of the first row of stegoBlocks. This ensures that the iteration goes sequentially, continuously, row by row.

  9. User

    Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++;], {j, Length[stegoBlocks[[1]]]}, {i, Length[stegoBlocks]}]; раздница между этим кодом и этим stegoBlocks = ConstantArray[0, Dimensions[blocks]]; cvzIndex = 1; Do[ If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++]; , {i, 1, Length[stegoBlocks]}, {j, 1, Length[stegoBlocks[[1]]]} ];

    stegoImage1 = ImageAssemble[stegoBlocks];

  10. Assistant

    The difference between the two code snippets is in the order of the iteration variables i and j in the Do loop.

    In the original code snippet:

    Do[If[cvzIndex <= cvzLength,
       stegoBlocks[[i, j]] = 
        embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, 
         inverseMask, luminanceCoefficients, alpha];
       cvzIndex++;], {j, Length[stegoBlocks[[1]]]}, {i, Length[stegoBlocks]}];
    

    The iteration is done over j first (columns), and then over i (rows). This means each column is processed completely before moving to the next column.

    In the modified code:

    stegoBlocks = ConstantArray[0, Dimensions[blocks]];
    cvzIndex = 1;
    Do[
      If[cvzIndex <= cvzLength, 
       stegoBlocks[[i, j]] = 
        embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, 
         inverseMask, luminanceCoefficients, alpha];
       cvzIndex++];,
      {i, 1, Length[stegoBlocks]}, {j, 1, Length[stegoBlocks[[1]]]}];
    
    stegoImage1 = ImageAssemble[stegoBlocks];
    

    The iteration is done over i first (rows), and then over j (columns). This means each row is processed completely before moving to the next row.

    The modified code processes the image blocks sequentially, continuously, row by row.

  11. User

    Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++;], {i, Length[stegoBlocks[[1]]]}, {j, Length[stegoBlocks]}]; разница между этим кодом и этим Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++;], {j, Length[stegoBlocks[[1]]]}, {i, Length[stegoBlocks]}];

  12. Assistant

    The difference between the two code snippets is in the order of the iteration variables i and j in the Do loop.

    In the original code snippet:

    Do[If[cvzIndex <= cvzLength, 
       stegoBlocks[[i, j]] = 
        embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, 
         inverseMask, luminanceCoefficients, alpha];
       cvzIndex++;], {j, Length[stegoBlocks[[1]]]}, {i, 
       Length[stegoBlocks]}];
    

    The iteration is done over j first (columns), and then over i (rows). This means each column is processed completely before moving to the next column.

    In the modified code:

    Do[If[cvzIndex <= cvzLength, 
       stegoBlocks[[i, j]] = 
        embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, 
         inverseMask, luminanceCoefficients, alpha];
       cvzIndex++;], {i, Length[stegoBlocks[[1]]]}, {j, 
       Length[stegoBlocks]}];
    

    The iteration is done over i first (rows), and then over j (columns). This means each row is processed completely before moving to the next row.

    So, in summary, the difference is in the order of the iteration variables, which determines whether the iteration is done column-wise or row-wise.

  13. User

    embedDataInBlock[block_, dataBit_, mask_, inverseMask_, luminanceCoefficients_, alpha_] := Module[{blockData, flattenB1, flattenB0, lumB1, lumB0, deltaLum, deltaB, deltaArray}, blockData = ImageData[block, "Byte"]; flattenB1 = Flatten[blockDatamask, 1]; flattenB0 = Flatten[blockDatainverseMask, 1]; lumB1 = Mean[Dot[flattenB1, luminanceCoefficients]]; lumB0 = Mean[Dot[flattenB0, luminanceCoefficients]]; deltaLum = 0; If[dataBit == 1 && lumB0 - lumB1 <= alpha, deltaLum = alpha + 1 - (lumB0 - lumB1); deltaB = deltaLum*luminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]inverseMask; blockData += deltaArray;]; If[dataBit == 0 && lumB0 - lumB1 >= -alpha, deltaLum = -alpha - 1 - (lumB0 - lumB1); deltaB = deltaLumluminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]*inverseMask; blockData += deltaArray;]; (Print["Яркость с маской 1: ",lumB1,", Яркость с маской 0: ", lumB0,", Разница в яркости (deltaLum): ",deltaLum, ", Встраиваемый бит: ",dataBit]) Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, luminanceCoefficients, alpha]; cvzIndex++;], {i, Length[stegoBlocks[[1]]]}, {j, Length[stegoBlocks]}]; сделай этот же код но так что бы похож не был

  14. Assistant

    embedDataInBlock[block_, dataBit_, mask_, inverseMask_, luminanceCoefficients_, alpha_] := Module[{blockData, flattenB1, flattenB0, lumB1, lumB0, deltaLum, deltaB, deltaArray}, blockData = ImageData[block, "Byte"]; flattenB1 = Flatten[blockDatamask, 1]; flattenB0 = Flatten[blockDatainverseMask, 1]; lumB1 = Mean[Dot[flattenB1, luminanceCoefficients]]; lumB0 = Mean[Dot[flattenB0, luminanceCoefficients]]; deltaLum = 0; If[dataBit == 1 && lumB0 - lumB1 <= alpha, deltaLum = alpha + 1 - (lumB0 - lumB1); deltaB = deltaLum*luminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]inverseMask; blockData += deltaArray;]; If[dataBit == 0 && lumB0 - lumB1 >= -alpha, deltaLum = -alpha - 1 - (lumB0 - lumB1); deltaB = deltaLumluminanceCoefficients; deltaArray = ConstantArray[deltaB, {8, 8}]*inverseMask; blockData += deltaArray;]; (Print["Яркость с маской 1: ",lumB1,", Яркость с маской 0: ", lumB0,", Разница в яркости (deltaLum): ",deltaLum, ", Встраиваемый бит: ",dataBit]) Do[If[cvzIndex <= cvzLength, stegoBlocks[[i, j]] = embedDataInBlock[stegoBlocks[[i, j]], CVZ[[cvzIndex]], mask, inverseMask, lumin

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.