Skip to content
TheChatArchiveThe Chat Archive
gpt-3.5-turbo-0301· openaiHugging Face Suzhen/CodeChat

openwrt如何enable SAE H2E

  1. User

    openwrt如何enable SAE H2E

  2. Assistant

    要启用SAE H2E,需要执行以下步骤:

    1. 确认你的无线芯片支持SAE H2E。目前常见的支持SAE H2E的芯片有Qualcomm Atheros QCA9984、QCA9889等。

    2. 安装支持SAE H2E的驱动程序。你需要使用OpenWrt支持的版本的驱动程序,具体可以参考官方文档。

    3. 确认你的OpenWrt已安装hostapd。在终端中运行以下命令以检查:

      opkg list-installed | grep hostapd
      

      如果返回结果中显示已安装hostapd,则可继续进行下一步操作。

    4. 编辑hostapd配置文件。在终端中运行以下命令以打开主机apd.conf文件:

      vi /etc/hostapd.conf
      

      然后在文件中添加以下行:

      sae_require_h2e=1
      ieee80211w=2
      

      这些行使SAE H2E和802.11w成为开启状态。

    5. 保存并关闭文件,并运行以下命令以启动hostapd:

      /etc/init.d/hostapd restart
      

      这将重新启动hostapd服务,并使配置更改生效。

    完成以上步骤后,你的OpenWrt系统应该成功启用了SAE H2E。

  3. User

    wireless wpa3 2.4g beacon没有带SAE hash-to-element帧,我该如何添加SAE hash-to-element帧

  4. Assistant

    如果你的无线Ap没有在信标帧中添加SAE Hash-to-Element帧,那么你可以通过修改主机apd的配置文件来添加该帧。

    首先,你需要确认你的OpenWrt系统已经支持SAE Hash-to-Element帧。你可以执行以下命令来检查:

    iw phy phy0 info | grep -i "SAE HT"
    

    如果返回结果中显示支持SAE Hash-to-Element帧,则可继续进行下一步操作。

    然后,你需要打开主机apd的配置文件。在终端中执行以下命令:

    vi /etc/hostapd.conf
    

    然后,在文件中添加以下行:

    sae_require_h2e=1
    

    保存并退出文件,然后重新启动hostapd服务:

    /etc/init.d/hostapd restart
    

    这样就可以在信标帧中添加SAE Hash-to-Element帧了。

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.