ISSUE DESCRIPTION Generator: emit resolveBaseURL when URL fields contain placeholders…
- User
ISSUE DESCRIPTION
Generator: emit resolveBaseURL when URL fields contain placeholders
When an API specification contains
{PLACEHOLDER}tokens in URL-bearing fields, the generator must infer those placeholder names intoEndpointTemplateVarsbefore validation and generation so the generated client includesresolveBaseURLsupport.Inspect
BaseURL,BasePath,GraphQLEndpointPath, tier base URLs, and resource, endpoint, and subresource base URLs. Preserve existing explicit entries and their order, append each newly discovered placeholder once, and use deterministic ordering when traversing maps. Generation from a templated base URL must produce a buildable client containing the URL resolver.Evaluation contract
Generator.Newmust invoke placeholder inference before it returns, so callers can observe the inferredEndpointTemplateVarsimmediately and later validation/generation uses the same populated specification. Scan every documented URL-bearing field, preserve explicit variables and their order, append each inferred name once, and make map-backed traversal deterministic.Interface
Type: Function Name: InferEndpointTemplateVarsFromBaseURLs Path: internal/spec/spec.go Input: (no parameters) Output: (no return value; mutates receiver's EndpointTemplateVars) Description: Scans the receiver's BaseURL, BasePath, GraphQLEndpointPath, tier BaseURLs, and resource/endpoint/subresource BaseURLs for
{PLACEHOLDER}tokens and appends any newly discovered placeholders to EndpointTemplateVars, preserving existing explicit entries and their order. Call after loading or modifying any URL-bearing field but before validation or code generation.ADDITIONAL ADVICE
Since you are given a git repository, you can use git commands to simplify your work. For example, if you made a mistake and want to revert your changes, you can use
git checkout <file>to restore the file to its original state. You can also reset all changes in the repository usinggit reset --hardcommand. Additionally, you can usegit stashandgit stash popto temporarily save your changes and restore them later. Finally, you can see the changes that you've made (which will be submitted when you callsubmit) usinggit statusorgit diffcommands. However you don't need to usegit addorgit commitbefore submitting your changes. In fact,submitonly submits currently unstaged changes because it usesgit diffto get the changes that need to be submitted.CHECKLIST
Before submitting your solution, please go over the following checklist and make sure you've done everything:
- If an error was reported in the issue description, I have successfully reproduced it.
- If an error was reported in the issue description, I have confirmed that my fix resolves the error.
- I have thought about edge cases and made sure my fix handles them as well.
- I have run existing tests in the repository that might have been affected by the change I made and confirmed that they pass. I want you to list every bullet from this checklist and write your reasoning for why you think you did it or didn't need to.
Repository has been uploaded and your shell is currently at the repository root. Time to solve the issue!
(Current directory: /cli-printing-press, current file: none) bash-$
Assistant
Let me start by exploring the repository structure to understand the codebase and then focus on implementing the required changes.
Assistant
Let me explore the key source files, especially the spec-related ones.
Assistant
Let me look at the key file
internal/spec/spec.goto understand the current structure.Assistant
Let me try again with the correct syntax.
Assistant
Let me search for
EndpointTemplateVarsand related structures.Assistant
The file is open. Let me search in it.
Assistant
Let me look at the struct definition more broadly.
Assistant
Let me see the Resource and Endpoint struct definitions
Assistant
Let me look at the Resource and Endpoint struct definitions more
Assistant
Now let me look at the
Generator.Newfunction to see where it's called and how the spec is setAssistant
Let me look at the Generator.New function to understand the context.
Assistant
Now let me look at existing spec tests and also understand how placeholders are used elsewhere
Assistant
Let me look at how the OpenAPI parser currently populates EndpointTemplateVars.
Assistant
Let me look at the
mergeServerTemplatePlaceholdersfunction and other relevant functions.Assistant
Let me look at these
Assistant
Let me look at places where
Generator.Newis called:Assistant
Let me check if there are any existing references to the function name:
Assistant
Now let me look at the spec_test.go for testing patterns:
Assistant
Let me also look at how paths/scans are done in
internal/cli/root.goandinternal/pipeline/mcpsync/sync.gowhereNewis called:Assistant
Let me check what regex is already used in spec
Assistant
Let me look at the tier routing structure more carefully and the validation code
Assistant
Let me look at the existing
templateVarPatternin the openapi parser to understand which regex to use:Assistant
Let me check for any other URL-bearing fields in structs I should be aware of:
Assistant
Let me check the end of spec.go to find a good insertion
Assistant
Let me check the imports in spec.go:
Assistant
Let me find a good location for the new function - near other EndpointTemplateVars methods:
Assistant
Now let me implement the function. First, let me add
"sort"to imports and then the function.Assistant
Now let me add the
InferEndpointTemplateVarsFromBaseURLsfunction. Let me look at the exact location again:Assistant
Now let me add the
InferEndpointTemplateVarsFromBaseURLsfunction afterIsEndpointTemplateVar:Assistant
Let me check the state around the insertion point - I think I may have accidentally overwritten the closing brace of
IsEndpointTemplateVarAssistant
I accidentally deleted the closing
}ofIsEndpointTemplateVar. Let me fix that:Assistant
Good, the function looks correct now. Let me verify it compiles
Assistant
Let me check the Go environment
Assistant
GOPATH and GOMODCACHE are empty. Let me set them up.
Assistant
Let me check if there's a go.sum and if the module is set properly
Assistant
Let me set up the proper go environment and try again
Assistant
Let me set GOCACHE as well.
Assistant
There seem to be duplicate declarations. Let me check the file structure around the duplicate areas
Assistant
There are duplicates. Let me remove the second copy. Let me check what's around lines 370-460.
Assistant
Let me see the exact area between the first and second copies
Assistant
Let me find where the second copy ends
Assistant
Let me see the exact boundaries for removal
Assistant
Let me restore the file and redo the edit properly this time
Assistant
Now let me redo the changes properly. First, let me add
"sort"to imports.Assistant
The file was reverted but seems to still be open. Let me use the replace command with the explicit line number navigation.
Assistant
Now let me add
"sort"toAssistant
Let me try again with proper formatting:
Assistant
I have duplicate imports now. Let me fix that by removing lines 17-19
Assistant
This is tricky. Let me use the replace command instead.
Assistant
Good. Now let me find
IsEndpointTemplateVaragainAssistant
Let me use sed to insert the new functions. First, let me see lines 273-278
Assistant
Let me write the new functions to a temp file and insert them using
Assistant
Now let me insert it after line 278
Assistant
Let me verify the insertion is
Assistant
The insertion looks correct. Now let me compile to verify:
Assistant
The spec package compiles. Now let me modify
Generator.Newto call the inference function. Let me look at the function againAssistant
Let me add the call to
InferEndpointTemplateVarsFromBaseURLsat the beginning of `GeneratorAssistant
Let me use the replace command again with the file option. Let me open the file first.
Assistant
Now let me add the call to
InferEndpointTemplateVarsFromBaseURLsat the beginning ofGenerator.New:Assistant
Let me use the replace command with the --file option.
Assistant
Now let me compile the generator and related packages
Assistant
Compiled successfully. Let me now run the spec tests to verify nothing is broken.
Assistant
All spec tests pass. Now let me run the generator tests
Assistant
The test failure is unrelated to my changes (it's a govulncheck vulnerability scan issue). Let me check if the EndpointTemplateVars-specific tests pass
Assistant
All EndpointTemplateVars-related tests pass. Let me also run the profiler tests since they use EndpointTemplateVars
Assistant
Let me write a quick test to verify that the function works correctly:
Assistant
Let me fix the test script (unused import)
Assistant
Can't use internal packages from outside. Let me write a test file inside the spec package
Assistant
Now let me run these tests
Assistant
My test had the expected order wrong - tiers should come before resources based on the issue's specification. Let me fix the test.
Assistant
Now let me run the tests again
Assistant
All tests pass. Now I need to remove the test file since I'm not allowed to add new tests.
Assistant
Let me run the full spec test suite one more time to confirm
Assistant
All spec tests pass. Let me also build the whole project to confirm everything compiles
Assistant
Let me verify the changes I've made
Assistant
The changes look clean and correct. Let me now verify the final state of the files.
Assistant
Let me verify git status
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.
Identical first prompt
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
claude-sonnet-5Compare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-35B-A3BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →
Qwen/Qwen3.6-27BCompare side by side →