Skip to content
TheChatArchiveThe Chat Archive
Geminigemini-2.5-flash-lite-preview-06-17-thinking· GoogleHugging Face Arena Expert 5K

ERROR: lwgeomconcavehull: GEOS Error: IllegalStateException: Unable to find shell join…

  1. User

    ERROR: lwgeom_concavehull: GEOS Error: IllegalStateException: Unable to find shell join index with interior join line

    CREATE TABLE schema.ap_cluster as SELECT country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, (st_dump(st_union(geom))).geom AS geom FROM ( SELECT country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, st_buildarea( st_exteriorring( (st_dump( st_union( st_buffer(geom, 20, 'quad_segs=1 join=mitre mitre_limit=15')) )).geom ) ) AS geom FROM ( SELECT country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, clst, count(1), st_concavehull(st_collect(geom), 0.99) AS geom FROM ( SELECT country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, buffered AS geom, st_clusterdbscan(buffered, 100 , 3) over () AS clst FROM schema.ap_buffer_rotation ) d WHERE clst is not null GROUP BY country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, clst having count(1) > 3 ) e GROUP BY country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi ) f GROUP BY country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi ;

  2. Gemini Assistant

    Okay, let's break down this query and the GEOS error.

    Understanding the Query's Goal

    The query aims to:

    1. Cluster Geometries: Use st_clusterdbscan on geometries in schema.ap_buffer_rotation (presumably already buffered) to group nearby features within the same administrative region (country_code, a3, etc.). Clusters must have more than 3 points.
    2. Calculate Concave Hulls: For each identified cluster within each administrative region, compute a concave hull (st_concavehull) using 99% concavity. This finds a shape that encloses the cluster points but allows for some inward 'dents'.
    3. Process Cluster Geometries: For each administrative region:
      • Union the concave hulls found within that region.
      • Buffer the resulting union outwards by 20 units (st_buffer).
      • Extract the exterior ring (st_exteriorring) of the buffered union.
      • Rebuild a polygon area (st_buildarea) from that exterior ring.
      • Dump (st_dump) the resulting area into individual geometries.
    4. Final Union: Union all the geometries generated for each administrative region into a final set of polygons.

    Understanding the GEOS Error

    GEOS Error: Unable to find shell join index with interior join line

    This is a low-level error from the GEOS library, which PostGIS uses for spatial operations. It typically occurs during complex polygon construction or modification. Specific scenarios include:

    • Invalid Input Lines: When st_buildarea (or related functions) receives line strings that don't form a valid, simple polygon ring (e.g., self-intersecting lines, lines with gaps, incorrect winding order, duplicate points).
    • Complex Topology: Issues arising when trying to construct polygons from multiple line segments, especially if they touch or overlap in complex ways that confuse the algorithm trying to distinguish the exterior shell from potential interior holes (even if none are intended).
    • Internal Concave Hull Issues: Although the error message mentions lwgeom_concavehull, it might be triggered during the st_buildarea step, which internally might use similar algorithms for constructing polygon shells, especially if the input line string derived from st_exteriorring has complex properties. The st_exteriorring(st_union(st_buffer(...))) sequence is complex and could easily generate lines that are problematic for st_buildarea.

    Why is it Happening Here?

    The most likely culprit is the sequence in subquery f: st_buildarea(st_exteriorring(st_union(st_buffer(geom))))

    1. st_union(st_buffer(geom)): Unioning potentially complex buffered concave hulls can create intricate MultiPolygons.
    2. st_exteriorring(...): Extracting only the outer boundary line. This might create lines that have sharp corners, near-zero length segments, or slight overlaps due to floating-point precision issues, especially after the union and buffer operations.
    3. st_buildarea(...): This function expects a clean, closed line ring to build a polygon. The potentially messy lines from the previous step might violate its assumptions, leading to the GEOS error.

    Proposed Solutions

    The core issue seems to be the complex processing in subquery f. Let's simplify it. The goal is likely to get the union of the buffered concave hulls, grouped by administrative region.

    Solution 1: Simplify Subquery f (Most Likely Fix)

    Remove st_exteriorring and st_buildarea. Buffer the concave hull before the union operations within the administrative groups.

    CREATE TABLE schema.ap_cluster AS
    SELECT
        country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi,
        -- Union the buffered concave hulls for each admin group, then dump parts
        (st_dump(st_union(geom))).geom AS geom
    FROM (
        SELECT
            country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi,
            -- Buffer the concave hull geometry for each cluster
            st_buffer(geom, 20, 'quad_segs=1 join=mitre mitre_limit=15') AS geom
        FROM (
            -- Calculate concave hull for each cluster
            SELECT
                country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, clst, count(1),
                st_concavehull(st_collect(geom), 0.99) AS geom
            FROM (
                -- Perform clustering
                SELECT
                    country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, buffered AS geom,
                    st_clusterdbscan(buffered, 100 , 3) over () AS clst
                FROM
                    schema.ap_buffer_rotation
            ) d
            WHERE
                clst IS NOT NULL
            GROUP BY
                country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, clst
            HAVING count(1) > 3
        ) e
        -- Group by admin region *after* calculating concave hulls for clusters within them
        GROUP BY
            country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi
    ) f
    GROUP BY
        country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi;
    
    -- Optional: Add index after creation
    -- CREATE INDEX idx_ap_cluster_geom ON schema.ap_cluster USING GIST (geom);
    

    Explanation of Changes:

    • The problematic st_exteriorring and st_buildarea are removed.
    • The st_buffer operation is now applied directly to the st_concavehull result (e.geom).
    • This buffered geometry is then collected in the outer query (f) for unioning based on the administrative grouping. This assumes you want the union of the buffered concave hulls, not just their boundaries.

    Solution 2: Validate Geometries

    If Solution 1 doesn't work, the issue might be invalid geometries being produced earlier. Try adding st_makevalid():

    -- Add st_makevalid() after concave hull and/or buffer steps
    -- Example: Modify subquery 'e' and the start of 'f'
    
    -- ... previous subqueries ...
                ) d
                WHERE clst IS NOT NULL
                GROUP BY
                    country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, clst
                HAVING count(1) > 3
            ) e
            GROUP BY
                country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi
        ) f_inner -- Renamed intermediate step
        GROUP BY
             country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi
    ) f
    GROUP BY
        country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi;
    
    -- Applying st_makevalid() within the structure of Solution 1:
    
    CREATE TABLE schema.ap_cluster AS
    SELECT
        country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi,
        (st_dump(st_union(geom))).geom AS geom
    FROM (
        SELECT
            country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi,
            -- Make valid *after* buffering concave hulls
            st_makevalid(
                st_buffer(geom, 20, 'quad_segs=1 join=mitre mitre_limit=15')
            ) AS geom
        FROM (
            SELECT
                country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, clst, count(1),
                 -- Make valid *after* concave hull
                st_makevalid(st_concavehull(st_collect(geom), 0.99)) AS geom
            FROM (
                SELECT
                    country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, buffered AS geom,
                    st_clusterdbscan(buffered, 100 , 3) over () AS clst
                FROM
                    schema.ap_buffer_rotation
            ) d
            WHERE clst IS NOT NULL
            GROUP BY
                country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi, clst
            HAVING count(1) > 3
        ) e
        GROUP BY
            country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi
    ) f
    GROUP BY
        country_code, a3, a3_nimi, a2, a2_nimi, a1, a1_nimi;
    

    Solution 3: Debug Step-by-Step

    If the above fail, isolate the problem:

    1. Run the query only down to subquery e. Save the results to a temporary table (CREATE TEMP TABLE temp_e AS ...). Check if e.geom contains valid geometries.
    2. Run the query from e onwards, but remove the st_buffer in f. Save results (CREATE TEMP TABLE temp_f_no_buffer AS ...). Check if unioning the concave hulls works.
    3. Run the query from e onwards, including the st_buffer but removing st_exteriorring and st_buildarea. Save results (CREATE TEMP TABLE temp_f_simplified AS ...). Check if this works (it's Solution 1).

    Solution 4: Adjust Concave Hull Parameter

    The 0.99 parameter is very strict. Try slightly relaxing it:

    • Change st_concavehull(st_collect(geom), 0.99) to st_concavehull(st_collect(geom), 0.95) or 0.9 in subquery e.

    Start with Solution 1, as it addresses the most suspicious part of the original query logic. If that fails, incorporate st_makevalid or try the step-by-step debugging.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.