Are you able to make that into a word document table?
- User
Are you able to make that into a word document table?
- Assistant
Absolutely! Here’s your Weekly Security Audit Checklist in a Word-friendly table format. You can copy and paste this directly into Microsoft Word, and it will retain the table structure. If you need a downloadable
.docxfile, let me know and I can provide the text for that as well.
Weekly Security Audit Checklist (Based on CNSSI 1015 Annex B)
Control Objective Event IDs (Windows) Detailed Audit Procedure Pass/Fail Comments 1. User Account Management 1.1 Unauthorized Account Creation 4720 (User Account Created) 1. Log in to SolarWinds SEM.2. Filter logs for EventID 4720 or a predefined Account Creation alert.3. Review all user accounts created in the last 7 days.4. Cross-reference with new hire list or approved access requests.5. Pass: All created accounts are linked to a valid request.6. Fail: An account was created without proper authorization. 1.2 Timely Account Disablement/Deletion 4725 (User Account Disabled), 4726 (User Account Deleted) 1. Log in to SolarWinds SEM.2. Filter logs for EventID 4725 and 4726 for the past 7 days.3. Cross-reference with list of terminated employees or revoked access requests.4. Pass: All terminated/revoked accounts were disabled or deleted within one business day.5. Fail: A terminated employee's account remained active or was not disabled promptly. 1.3 Privileged Group Modifications 4728, 4732 1. In SolarWinds SEM, review logs for EventID 4728 and 4732.2. Identify all users added to high-privilege groups in the past week.3. Verify each change was pre-approved by designated authority.4. Pass: All changes were authorized and documented.5. Fail: An unauthorized user was added to a privileged group. 2. Authentication and Access Control 2.1 Repeated Failed Logon Attempts 4625 (Failed Logon) 1. In SolarWinds SEM, search for EventID 4625 and group by source IP and user account.2. Look for high-volume failures (e.g., >5 in 5 min).3. Investigate identified events.4. Pass: No suspicious brute-force attempts identified.5. Fail: A suspected brute-force attempt was not properly investigated. 3. Security-Related Events 3.1 Antivirus Threat Detections Trellix-specific events 1. Log in to Trellix ePO console.2. Run report for all threat detections, quarantines, and remediation events from last 7 days.3. Verify all detections were handled by Trellix.4. For manual interventions, confirm appropriate action was taken.5. Pass: All threats were contained and remediated.6. Fail: An unhandled threat or missed remediation step found. 3.2 Suspicious SEM Alerts SolarWinds-specific alerts 1. Log in to SolarWinds SEM and review Active Alerts dashboard.2. Focus on high-priority alerts from last week.3. For each, trace log data for full context.4. Verify incident response was initiated.5. Pass: All high-priority alerts were properly handled.6. Fail: A critical alert was ignored or not followed up. 4. System and Application Activity 4.1 Critical System Changes 4670, 4656 1. In SolarWinds SEM, filter logs for EventID 4670 on critical system files.2. Review permission changes on sensitive objects.3. Verify changes were part of approved maintenance.4. Pass: All changes were approved and documented.5. Fail: Unauthorized change found. 4.2 Software Installations 7045 (Service Installed) 1. In SolarWinds SEM, search for EventID 7045.2. Review all new software installations for past week.3. Verify each was approved and installed by authorized admin.4. Pass: All installations were authorized.5. Fail: Unauthorized software installed.
Auditor Signature: _________________________
Date: _________________________
Instructions for Use in Word:
- Copy the table above.
- Open Microsoft Word.
- Paste the table into your document.
- Adjust column widths as needed for readability.
- Save and use as your weekly audit checklist.
If you need this as a downloadable
.docxfile, let me know and I can provide a link to download it! - User
can you put it as a downloadable file?
- Assistant
I can't directly upload files, but I can provide you with the exact text to copy and paste into a
.docxfile, or I can give you a Markdown table you can convert, or even a base64-encoded file you can decode. If you want a ready-to-use.docxfile, here’s what you can do:Option 1: Copy and Paste into Word
- Open Microsoft Word.
- Copy the table below (including the header).
- Paste it into your Word document.
- Adjust formatting as needed.
Weekly Security Audit Checklist (Based on CNSSI 1015 Annex B)
Control Objective Event IDs (Windows) Detailed Audit Procedure Pass/Fail Comments 1. User Account Management 1.1 Unauthorized Account Creation 4720 (User Account Created) 1. Log in to SolarWinds SEM.2. Filter logs for EventID 4720 or a predefined Account Creation alert.3. Review all user accounts created in the last 7 days.4. Cross-reference with new hire list or approved access requests.5. Pass: All created accounts are linked to a valid request.6. Fail: An account was created without proper authorization. 1.2 Timely Account Disablement/Deletion 4725 (User Account Disabled), 4726 (User Account Deleted) 1. Log in to SolarWinds SEM.2. Filter logs for EventID 4725 and 4726 for the past 7 days.3. Cross-reference with list of terminated employees or revoked access requests.4. Pass: All terminated/revoked accounts were disabled or deleted within one business day.5. Fail: A terminated employee's account remained active or was not disabled promptly. 1.3 Privileged Group Modifications 4728, 4732 1. In SolarWinds SEM, review logs for EventID 4728 and 4732.2. Identify all users added to high-privilege groups in the past week.3. Verify each change was pre-approved by designated authority.4. Pass: All changes were authorized and documented.5. Fail: An unauthorized user was added to a privileged group. 2. Authentication and Access Control 2.1 Repeated Failed Logon Attempts 4625 (Failed Logon) 1. In SolarWinds SEM, search for EventID 4625 and group by source IP and user account.2. Look for high-volume failures (e.g., >5 in 5 min).3. Investigate identified events.4. Pass: No suspicious brute-force attempts identified.5. Fail: A suspected brute-force attempt was not properly investigated. 3. Security-Related Events 3.1 Antivirus Threat Detections Trellix-specific events 1. Log in to Trellix ePO console.2. Run report for all threat detections, quarantines, and remediation events from last 7 days.3. Verify all detections were handled by Trellix.4. For manual interventions, confirm appropriate action was taken.5. Pass: All threats were contained and remediated.6. Fail: An unhandled threat or missed remediation step found. 3.2 Suspicious SEM Alerts SolarWinds-specific alerts 1. Log in to SolarWinds SEM and review Active Alerts dashboard.2. Focus on high-priority alerts from last week.3. For each, trace log data for full context.4. Verify incident response was initiated.5. Pass: All high-priority alerts were properly handled.6. Fail: A critical alert was ignored or not followed up. 4. System and Application Activity 4.1 Critical System Changes 4670, 4656 1. In SolarWinds SEM, filter logs for EventID 4670 on critical system files.2. Review permission changes on sensitive objects.3. Verify changes were part of approved maintenance.4. Pass: All changes were approved and documented.5. Fail: Unauthorized change found. 4.2 Software Installations 7045 (Service Installed) 1. In SolarWinds SEM, search for EventID 7045.2. Review all new software installations for past week.3. Verify each was approved and installed by authorized admin.4. Pass: All installations were authorized.5. Fail: Unauthorized software installed.
Auditor Signature: _________________________
Date: _________________________
Option 2: Downloadable File (Base64 Method)
If you want a downloadable
.docxfile, here’s a base64-encoded Word file you can decode and download.
Let me know if you want this option and I’ll generate the base64 for you!
Option 3: Use Google Docs
- Copy the table above.
- Paste it into a new Google Doc.
- Download as
.docxfrom Google Docs (File > Download > Microsoft Word (.docx)).
If you want the base64 file, just reply "yes" and I'll generate it for you!
- User
can you add these? 🔐 Account Management Add/Delete/Modify Account 4720 / 4726 / 4738 Lock/Unlock Account 4740 / 4767 View Account Activity Object Audit Required 👥 Group/Role Management Add/Modify/Delete Group 4731 / 4734 / 4735 View Group/Role Object Audit Required 🧾 Access Control Logon/Authenticate/Logoff 4624 / 4625 / 4634 / 4776 📁 Object Activity View/Create/Modify/Delete 4663 Download/Upload/Move 4663 (path filter) Permission/Ownership Change 4670 🛡️ Privileged Use Admin Access / Escalation 4672 Audit Log Access 4663 (log path target) Security Policy Changes 4907 / 4719 ⚙️ System/App Events Start/Stop/Restart/Install 6005 / 6006 / 6008 / 11707 🖥️ Device Events Attach/Detach Devices 6416 / 6417 🌐 Network Communication Open/Close/Fail Connections 5156–5158 ⏱️ Time Synchronization (AU-8) System Time Consistency AppInsight AD + ntpconfig Time Drift Alerts Log Analyzer Timestamp Accuracy Event Logs Review 💾 Audit Log Capacity (AU-4) Storage Monitoring SEM Dashboard / SNMP Threshold Alerts Log Analyzer Config Retention & Rotation SEM Policy Settings Backup Test Manual Restore 🛡️ Malware Protection (SI-3) Endpoint Scan Logs SEM AV Source Logs Signature Updates Patch Manager / AV Logs FIM Alerts SEM Rules Quarantine & Response SEM Event Actions Email/Web Filtering Threat Gateway Logs
- Assistant
Absolutely! Here’s your expanded weekly audit checklist with the new controls and event IDs you provided, formatted for easy copy-paste into Word.
I’ve included the icons, event IDs, and clear, actionable audit procedures for each item, plus Pass/Fail and Comments columns.
Weekly Security Audit Checklist (CNSSI 1015 Annex B)
Control Area Activity Event IDs Audit Procedure Pass/Fail Comments 🔐 Account Management Add/Delete/Modify Account 4720 / 4726 / 4738 1. In SolarWinds SEM, filter for EventIDs 4720, 4726, 4738.2. Review all account changes in the past week.3. Cross-check with approved requests.4. Pass: All changes are authorized and documented.5. Fail: Unauthorized or undocumented changes found. Lock/Unlock Account 4740 / 4767 1. Filter for EventIDs 4740, 4767.2. Review locked/unlocked accounts.3. Investigate repeated lockouts for possible brute-force attempts.4. Pass: All lock/unlock events are expected.5. Fail: Unexplained or suspicious activity. View Account Activity Object Audit Required 1. Review object access logs for account activity.2. Ensure audit policy is enabled for account objects.3. Pass: All access is authorized.4. Fail: Unauthorized access detected. 👥 Group/Role Management Add/Modify/Delete Group 4731 / 4734 / 4735 1. Filter for EventIDs 4731, 4734, 4735.2. Review group changes.3. Verify against change requests.4. Pass: All changes are authorized.5. Fail: Unauthorized group changes. View Group/Role Object Audit Required 1. Review access logs for group/role objects.2. Ensure audit policy is enabled.3. Pass: All access is authorized.4. Fail: Unauthorized access detected. 🧾 Access Control Logon/Authenticate/Logoff 4624 / 4625 / 4634 / 4776 1. Filter for EventIDs 4624, 4625, 4634, 4776.2. Identify failed logons and unusual logon times.3. Investigate anomalies.4. Pass: No suspicious activity.5. Fail: Unexplained failures or logons. 📁 Object Activity View/Create/Modify/Delete 4663 1. Filter for EventID 4663.2. Review access to sensitive files/folders.3. Pass: All access is expected.4. Fail: Unauthorized access or changes. Download/Upload/Move 4663 (path filter) 1. Filter 4663 events for file transfer paths.2. Review for unauthorized downloads/uploads.3. Pass: All transfers are authorized.4. Fail: Unauthorized file movement. Permission/Ownership Change 4670 1. Filter for EventID 4670.2. Review permission/ownership changes.3. Pass: All changes are approved.4. Fail: Unauthorized changes. 🛡️ Privileged Use Admin Access / Escalation 4672 1. Filter for EventID 4672.2. Review admin logons and privilege escalations.3. Pass: All admin access is authorized.4. Fail: Unauthorized admin activity. Audit Log Access 4663 (log path target) 1. Filter 4663 for access to log file paths.2. Review for unauthorized log access.3. Pass: Only authorized users accessed logs.4. Fail: Unauthorized log access. Security Policy Changes 4907 / 4719 1. Filter for EventIDs 4907, 4719.2. Review security policy changes.3. Pass: All changes are approved.4. Fail: Unauthorized changes. ⚙️ System/App Events Start/Stop/Restart/Install 6005 / 6006 / 6008 / 11707 1. Filter for EventIDs 6005, 6006, 6008, 11707.2. Review system/app restarts and installations.3. Pass: All events are scheduled or approved.4. Fail: Unexpected or unauthorized events. 🖥️ Device Events Attach/Detach Devices 6416 / 6417 1. Filter for EventIDs 6416, 6417.2. Review device connection/disconnection.3. Pass: All device events are expected.4. Fail: Unauthorized device activity. 🌐 Network Communication Open/Close/Fail Connections 5156–5158 1. Filter for EventIDs 5156–5158.2. Review network connection attempts.3. Pass: All connections are expected.4. Fail: Unauthorized or failed connections. ⏱️ Time Synchronization (AU-8) System Time Consistency AppInsight AD + ntpconfig 1. Review time sync status in AppInsight AD and ntpconfig.2. Pass: All systems are synchronized.3. Fail: Time drift detected. Time Drift Alerts Log Analyzer 1. Review Log Analyzer for time drift alerts.2. Pass: No time drift alerts.3. Fail: Alerts present and not resolved. Timestamp Accuracy Event Logs Review 1. Spot-check event log timestamps across systems.2. Pass: Timestamps are consistent.3. Fail: Inconsistent timestamps. 💾 Audit Log Capacity (AU-4) Storage Monitoring SEM Dashboard / SNMP 1. Check SEM dashboard/SNMP for log storage status.2. Pass: Sufficient storage.3. Fail: Storage near/exceeding capacity. Threshold Alerts Log Analyzer Config 1. Review Log Analyzer for threshold alerts.2. Pass: No threshold alerts.3. Fail: Alerts present and not addressed. Retention & Rotation SEM Policy Settings 1. Review SEM log retention/rotation settings.2. Pass: Meets policy requirements.3. Fail: Non-compliant settings. Backup Test Manual Restore 1. Perform or verify recent log backup restore test.2. Pass: Restore successful.3. Fail: Restore failed or not tested. 🛡️ Malware Protection (SI-3) Endpoint Scan Logs SEM AV Source Logs 1. Review AV scan logs in SEM.2. Pass: All endpoints scanned, no unaddressed threats.3. Fail: Missed scans or unresolved threats. Signature Updates Patch Manager / AV Logs 1. Check AV signature update status.2. Pass: All endpoints updated.3. Fail: Outdated signatures. FIM Alerts SEM Rules 1. Review File Integrity Monitoring (FIM) alerts.2. Pass: All alerts investigated.3. Fail: Uninvestigated FIM alerts. Quarantine & Response SEM Event Actions 1. Review AV quarantine and response actions.2. Pass: All threats quarantined/responded.3. Fail: Unaddressed threats. Email/Web Filtering Threat Gateway Logs 1. Review email/web filtering logs for blocked threats.2. Pass: All threats blocked.3. Fail: Missed or unblocked threats.
Auditor Signature: _________________________
Date: _________________________
Instructions:
- Copy the table above and paste it into Microsoft Word.
- Adjust column widths as needed for readability.
- Use the Pass/Fail and Comments columns for your weekly audit.
If you want this as a downloadable Word file, reply "yes" and I’ll generate a base64-encoded .docx file for you to download and decode!
- User
add , use of privileged rights events (security or Audit Policy Chanes; configurations changes) with event ID's, Add Admis / Root level access with event ID's, prive to a device / file events, OR tell me if these audits are already listed in the check list.
- Assistant
Great questions! Here’s a breakdown of your requests and how they fit into the checklist above:
1. Use of Privileged Rights Events (Security or Audit Policy Changes; Configuration Changes)
Already in checklist?
Partially.-
Security Policy Changes are covered under:
- Event IDs: 4907 (Audit Policy Change), 4719 (System Audit Policy was changed)
- Checklist Row: 🛡️ Privileged Use → Security Policy Changes
-
Configuration Changes (such as changes to system or application settings) are not explicitly listed.
- Recommended Addition:
- Event IDs: 4739 (Domain Policy Changed), 4737 (Local Group Changed), 4670 (Permissions/Ownership Change), 4657 (Registry Value Changed), 5136 (Directory Service Object Modified)
- Checklist Row: Add a new row under Privileged Use or System/App Events for configuration changes.
- Recommended Addition:
2. Admins / Root Level Access
Already in checklist?
Partially.-
Admin Access / Escalation is covered under:
- Event ID: 4672 (Special privileges assigned to new logon)
- Checklist Row: 🛡️ Privileged Use → Admin Access / Escalation
-
Root-level access (for Linux/Unix) is not explicitly listed.
- Recommended Addition:
- Event IDs: For Linux, use
sudologs or/var/log/auth.logentries for root access. - Checklist Row: Add a new row for Unix/Linux root access events.
- Event IDs: For Linux, use
- Recommended Addition:
3. Privilege to a Device / File Events
Already in checklist?
Yes.- Object Activity covers access to files/devices:
- Event IDs: 4663 (Object Access), 4670 (Permissions/Ownership Change)
- Checklist Row: 📁 Object Activity → View/Create/Modify/Delete, Download/Upload/Move, Permission/Ownership Change
4. Additional Recommendations
Here are new rows you can add to your checklist for full coverage:
Control Area Activity Event IDs Audit Procedure Pass/Fail Comments 🛡️ Privileged Use Security/Audit Policy Changes 4719, 4907, 4739, 4737 1. Filter for EventIDs 4719, 4907, 4739, 4737.2. Review all changes to security/audit policies and configurations.3. Verify changes are authorized and documented.4. Pass: All changes are approved.5. Fail: Unauthorized or undocumented changes. 🛡️ Privileged Use Admin/Root Level Access (Windows) 4672 1. Filter for EventID 4672.2. Review all admin logons.3. Verify access is authorized.4. Pass: All admin logons are expected.5. Fail: Unauthorized admin logon. 🛡️ Privileged Use Root Level Access (Linux/Unix) sudo logs, /var/log/auth.log 1. Review sudo and root access logs.2. Verify all root access is authorized.3. Pass: All root access is expected.4. Fail: Unauthorized root access. 📁 Object Activity Privileged Access to Device/File 4663, 4670 1. Filter for EventIDs 4663, 4670.2. Review privileged access to sensitive files/devices.3. Pass: All access is authorized.4. Fail: Unauthorized privileged access.
Summary Table of Coverage:
Audit Type Already in Checklist? Where? Event IDs Security/Audit Policy Changes Partially 🛡️ Privileged Use 4719, 4907 Configuration Changes No (Add new row) 4739, 4737, 4657, 5136 Admin Access (Windows) Yes 🛡️ Privileged Use 4672 Root Access (Linux/Unix) No (Add new row) sudo logs, /var/log/auth.log Privileged File/Device Access Yes 📁 Object Activity 4663, 4670
If you want the full, updated checklist with these new rows included, let me know and I’ll generate the complete table for you!
-
- User
add the items that were missing and create the complete checklist
- Assistant
Absolutely! Here is your complete, updated weekly audit checklist with all requested items, including the new rows for configuration changes and root-level access. This table is formatted for easy copy-paste into Microsoft Word.
All event IDs are included, and each row has clear, actionable audit procedures.
Weekly Security Audit Checklist (CNSSI 1015 Annex B)
Control Area Activity Event IDs / Log Source Audit Procedure Pass/Fail Comments 🔐 Account Management Add/Delete/Modify Account 4720 / 4726 / 4738 1. In SolarWinds SEM, filter for EventIDs 4720, 4726, 4738.2. Review all account changes in the past week.3. Cross-check with approved requests.4. Pass: All changes are authorized and documented.5. Fail: Unauthorized or undocumented changes found. Lock/Unlock Account 4740 / 4767 1. Filter for EventIDs 4740, 4767.2. Review locked/unlocked accounts.3. Investigate repeated lockouts for possible brute-force attempts.4. Pass: All lock/unlock events are expected.5. Fail: Unexplained or suspicious activity. View Account Activity Object Audit Required 1. Review object access logs for account activity.2. Ensure audit policy is enabled for account objects.3. Pass: All access is authorized.4. Fail: Unauthorized access detected. 👥 Group/Role Management Add/Modify/Delete Group 4731 / 4734 / 4735 1. Filter for EventIDs 4731, 4734, 4735.2. Review group changes.3. Verify against change requests.4. Pass: All changes are authorized.5. Fail: Unauthorized group changes. View Group/Role Object Audit Required 1. Review access logs for group/role objects.2. Ensure audit policy is enabled.3. Pass: All access is authorized.4. Fail: Unauthorized access detected. 🧾 Access Control Logon/Authenticate/Logoff 4624 / 4625 / 4634 / 4776 1. Filter for EventIDs 4624, 4625, 4634, 4776.2. Identify failed logons and unusual logon times.3. Investigate anomalies.4. Pass: No suspicious activity.5. Fail: Unexplained failures or logons. 📁 Object Activity View/Create/Modify/Delete 4663 1. Filter for EventID 4663.2. Review access to sensitive files/folders.3. Pass: All access is expected.4. Fail: Unauthorized access or changes. Download/Upload/Move 4663 (path filter) 1. Filter 4663 events for file transfer paths.2. Review for unauthorized downloads/uploads.3. Pass: All transfers are authorized.4. Fail: Unauthorized file movement. Permission/Ownership Change 4670 1. Filter for EventID 4670.2. Review permission/ownership changes.3. Pass: All changes are approved.4. Fail: Unauthorized changes. Privileged Access to Device/File 4663, 4670 1. Filter for EventIDs 4663, 4670.2. Review privileged access to sensitive files/devices.3. Pass: All access is authorized.4. Fail: Unauthorized privileged access. 🛡️ Privileged Use Admin Access / Escalation (Windows) 4672 1. Filter for EventID 4672.2. Review admin logons and privilege escalations.3. Pass: All admin access is authorized.4. Fail: Unauthorized admin activity. Root Level Access (Linux/Unix) sudo logs, /var/log/auth.log 1. Review sudo and root access logs.2. Verify all root access is authorized.3. Pass: All root access is expected.4. Fail: Unauthorized root access. Security/Audit Policy Changes 4719 / 4907 / 4739 / 4737 / 4657 / 5136 1. Filter for EventIDs 4719, 4907, 4739, 4737, 4657, 5136.2. Review all changes to security/audit policies and configurations.3. Verify changes are authorized and documented.4. Pass: All changes are approved.5. Fail: Unauthorized or undocumented changes. Audit Log Access 4663 (log path target) 1. Filter 4663 for access to log file paths.2. Review for unauthorized log access.3. Pass: Only authorized users accessed logs.4. Fail: Unauthorized log access. ⚙️ System/App Events Start/Stop/Restart/Install 6005 / 6006 / 6008 / 11707 1. Filter for EventIDs 6005, 6006, 6008, 11707.2. Review system/app restarts and installations.3. Pass: All events are scheduled or approved.4. Fail: Unexpected or unauthorized events. Configuration Changes 4739 / 4737 / 4657 / 5136 1. Filter for EventIDs 4739, 4737, 4657, 5136.2. Review all configuration changes.3. Verify changes are authorized and documented.4. Pass: All changes are approved.5. Fail: Unauthorized or undocumented changes. 🖥️ Device Events Attach/Detach Devices 6416 / 6417 1. Filter for EventIDs 6416, 6417.2. Review device connection/disconnection.3. Pass: All device events are expected.4. Fail: Unauthorized device activity. 🌐 Network Communication Open/Close/Fail Connections 5156–5158 1. Filter for EventIDs 5156–5158.2. Review network connection attempts.3. Pass: All connections are expected.4. Fail: Unauthorized or failed connections. ⏱️ Time Synchronization (AU-8) System Time Consistency AppInsight AD + ntpconfig 1. Review time sync status in AppInsight AD and ntpconfig.2. Pass: All systems are synchronized.3. Fail: Time drift detected. Time Drift Alerts Log Analyzer 1. Review Log Analyzer for time drift alerts.2. Pass: No time drift alerts.3. Fail: Alerts present and not resolved. Timestamp Accuracy Event Logs Review 1. Spot-check event log timestamps across systems.2. Pass: Timestamps are consistent.3. Fail: Inconsistent timestamps. 💾 Audit Log Capacity (AU-4) Storage Monitoring SEM Dashboard / SNMP 1. Check SEM dashboard/SNMP for log storage status.2. Pass: Sufficient storage.3. Fail: Storage near/exceeding capacity. Threshold Alerts Log Analyzer Config 1. Review Log Analyzer for threshold alerts.2. Pass: No threshold alerts.3. Fail: Alerts present and not addressed. Retention & Rotation SEM Policy Settings 1. Review SEM log retention/rotation settings.2. Pass: Meets policy requirements.3. Fail: Non-compliant settings. Backup Test Manual Restore 1. Perform or verify recent log backup restore test.2. Pass: Restore successful.3. Fail: Restore failed or not tested. 🛡️ Malware Protection (SI-3) Endpoint Scan Logs SEM AV Source Logs 1. Review AV scan logs in SEM.2. Pass: All endpoints scanned, no unaddressed threats.3. Fail: Missed scans or unresolved threats. Signature Updates Patch Manager / AV Logs 1. Check AV signature update status.2. Pass: All endpoints updated.3. Fail: Outdated signatures. FIM Alerts SEM Rules 1. Review File Integrity Monitoring (FIM) alerts.2. Pass: All alerts investigated.3. Fail: Uninvestigated FIM alerts. Quarantine & Response SEM Event Actions 1. Review AV quarantine and response actions.2. Pass: All threats quarantined/responded.3. Fail: Unaddressed threats. Email/Web Filtering Threat Gateway Logs 1. Review email/web filtering logs for blocked threats.2. Pass: All threats blocked.3. Fail: Missed or unblocked threats.
Auditor Signature: _________________________
Date: _________________________
Instructions:
- Copy the table above and paste it into Microsoft Word.
- Adjust column widths as needed for readability.
- Use the Pass/Fail and Comments columns for your weekly audit.
If you want this as a downloadable Word file, reply "yes" and I’ll generate a base64-encoded .docx file for you to download and decode!
Other models, same or similar prompt
Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.