Skip to content
TheChatArchiveThe Chat Archive
o4-mini-2025-04-16· OpenAIHugging Face Arena Expert 5K

What's a commercially available Cerium catalyst that can be used to activate…

  1. User

    What's a commercially available Cerium catalyst that can be used to activate polybutadiene for oxygen scavenging? It should be soluble in non-polar solvents.

  2. Assistant

    Here are a few cerium‐based catalysts/“driers” that are sold commercially, and which dissolve readily in non‐polar solvents (toluene, mineral spirits, aliphatic hydro­carbons, etc.) and have been used to activate unsaturated rubbers (e.g. polybutadiene) toward auto–oxidation/oxygen scavenging:

    1. Cerium(III) 2-ethylhexanoate
      • CAS-No. 824-12-1
      • Solubility: very good in C₆–C₁₂ aliphatic hydrocarbons, toluene, white spirits
      • Use: classic “metal soap” drier in alkyd/resin systems, redox‐cycles between Ce³⁺/Ce⁴⁺ to generate radicals on allylic sites
      • Sources: King Industries (trade names Cerium Octoate), Quaker Chemical, TCI, several distributors of drying‐oil additives

    2. Cerium(III) neodecanoate
      • CAS-No. 73398-61-5
      • Solubility: excellent in non-polar media
      • Use: same family as above; often blended with cobalt/manganese soaps, but alone will catalyze peroxidation of double bonds
      • Sources: BASF (“Octocure® CE”), Mistral, Shepherd

    3. Cerium(III) n-octanoate (cerium octoate)
      • CAS-No. 15058-21-2
      • Solubility: good in aliphatic solvents, aromatic solvents
      • Use: drying‐oil additive and radical initiator; redox cycles Ce³⁺↔Ce⁴⁺ for fast O₂ uptake

    4. Ceric tetrakis(dipivaloylmethanate) (Ce(dpm)₄)
      • CAS-No. 13801-23-7
      • Solubility: soluble in CH₂Cl₂, toluene, other aromatics
      • Use: true Ce⁴⁺ acetylacetonate analogue; stronger oxidant, may give faster initiation but is more expensive and moisture sensitive
      • Sources: Strem, Alfa Aesar, TCI

    5. Cerium(III) acetylacetonate (Ce(acac)₃)
      • CAS-No. 15087-51-5
      • Solubility: moderate in toluene, chlorinated solvents, poor in straight alkanes
      • Use: mild Lewis‐acid plus Ce³⁺/Ce⁴⁺ redox; sometimes used in combination with co‐driers

    Comparison at a glance:

    CatalystCe Ox. StateSolvent CompatibilityTypical UseMain Supplier/Trade Name
    Cerium(III) 2-ethylhexanoate+3Aliphatics, toluene, spiritsOxygen scavenger, “drier”King Ind. Cerium Octoate; Quaker
    Cerium(III) neodecanoate+3Aliphatics, aromaticsResin/alkyd drier, redox siteBASF Octocure® CE; Mistral
    Cerium(III) n-octanoate+3Aliphatics, pro­to­nic arom.Drying catalystVanderbilt, Quaker, TCI
    Ceric tetrakis(dipivaloyl-methanate)+4CH₂Cl₂, toluene, aromaticsFast radical initiatorStrem, Alfa Aesar
    Cerium(III) acetylacetonate+3Toluene, CHCl₃, EtOAcMild Lewis‐acid/redox agentSigma-Aldrich, TCI

    Recommendation
    – If your key constraint is solubility in aliphatic hydrocarbons (e.g. mineral spirits, white spirits or C₈–C₁₂ blends), reach first for one of the metal‐soap variants:
    • Cerium(III) 2-ethylhexanoate or neodecanoate.
    • They’re reasonably inert to moisture, inexpensive, and cycle Ce³⁺↔Ce⁴⁺ under O₂ to pull hydrogen off allylic C–H’s.

    – If you need a purer Ce⁴⁺ complex for a stronger, faster‐initiation burst (and don’t mind paying more for air‐sensitive material), use Ce(dpm)₄.

    Before you order, a couple of questions you might want to check on:
    • Exact solvent or resin system you’ll disperse in?
    • Target loading (phr) in your polybutadiene matrix?
    • Operating temperature range?

    Feel free to follow up with more details—happy to help you dial in the optimal cerium system for your oxygen‐scavenging PB formulation!

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.