Skip to content
TheChatArchiveThe Chat Archive
o3-2025-04-16· OpenAIHugging Face Arena Expert 5K

crash at hr = mcopyAllocator->Reset(); 3D12 ERROR: ID3D12CommandAllocator::Reset: A…

  1. User

    crash at hr = m_copyAllocator->Reset(); 3D12 ERROR: ID3D12CommandAllocator::Reset: A command allocator 0x0000024649B7BF20:'Unnamed ID3D12CommandAllocator Object' is being reset before previous executions associated with the allocator have completed. [ EXECUTION ERROR #552: COMMAND_ALLOCATOR_SYNC] D3D12: BREAK enabled for the previous message, which was: [ ERROR EXECUTION #552: COMMAND_ALLOCATOR_SYNC ]

  2. Assistant

    The allocator (and the command-list that lives on it) may only be reset after the GPU has executed every command that references them.
    In the code I gave you we reset the allocator immediately after submitting a copy batch:

    m_copyQueue->ExecuteCommandLists(1, lists);
    m_copyQueue->Signal(m_fence.Get(), m_fenceValue);   //<– GPU hasn’t finished yet
    m_copyAllocator->Reset();                           //<– BOOM (error #552)
    

    The GPU is still chewing on the commands, so the runtime quite correctly raises COMMAND_ALLOCATOR_SYNC.

    There are two ways to fix it; pick whichever you prefer.

    ───────────────────────────────────────────────────────────────────────────────

    1. Micro-fix (one allocator, wait before Reset) ───────────────────────────────────────────────────────────────────────────────

    Store the fence value that protects the allocator, and don’t reset until that value is reached.

    //  header --------------------------------------------------------------
    UINT64 m_allocatorFenceValue = 0;  // “this allocator is busy until …”
    
    //  SubmitUploads -------------------------------------------------------
    void SubmitUploads()
    {
        std::lock_guard lock(m_mutex);
        if (!m_hasPendingCopies) return;
    
        ThrowIfFailed( m_copyCommandList->Close() );
    
        ID3D12CommandList* lists[] = { m_copyCommandList.Get() };
        m_copyQueue->ExecuteCommandLists(1, lists);
    
        //  Signal *before* touching the allocator again
        m_allocatorFenceValue = m_fenceValue;
        m_copyQueue->Signal(m_fence.Get(), m_allocatorFenceValue);
        ++m_fenceValue;
    
        m_hasPendingCopies = false;          //  done recording this batch
    }
    
    //  UploadMesh (when starting a new batch) ------------------------------
    void BeginRecordingIfNeeded()
    {
        if (m_hasPendingCopies) return;      // already recording
    
        //  wait until the allocator is free
        if (m_fence->GetCompletedValue() < m_allocatorFenceValue)
        {
            m_fence->SetEventOnCompletion(m_allocatorFenceValue, m_fenceEvent);
            WaitForSingleObject(m_fenceEvent, INFINITE);
        }
    
        //  now we are allowed to reset / reuse it
        ThrowIfFailed( m_copyAllocator->Reset() );
        ThrowIfFailed( m_copyCommandList->Reset(m_copyAllocator.Get(), nullptr) );
        m_hasPendingCopies = true;
    }
    

    Call BeginRecordingIfNeeded() at the top of UploadMesh. That’s all – the rest of the code stays the same. The CPU only waits if you try to start recording a new batch while the previous one is still in flight.

    ─────────────────────────────────────────────────────────────────────────────── 2. Production-grade fix (allocator & cmd-list pool) ───────────────────────────────────────────────────────────────────────────────

    Never wait on the CPU; instead keep a circular array of allocators / command lists (N = swap-chain back-buffer count works well).
    Each slot has its own fence value.
    Before re-using the slot you check the fence; if the GPU hasn’t finished you simply spin to the next slot (or wait if all slots are busy).

    Skeleton:

    static constexpr UINT kNumSlots = 3;
    
    struct Slot
    {
        ComPtr<ID3D12CommandAllocator> alloc;
        ComPtr<ID3D12GraphicsCommandList> list;
        UINT64 fenceValue = 0;
    };
    
    Slot        m_slots[kNumSlots];
    UINT        m_curSlot = 0;
    
    //  at Initialize -------------------------------------------------------
    for (UINT i=0;i<kNumSlots;++i)
    {
        device->CreateCommandAllocator   (COPY, IID_PPV_ARGS(&m_slots[i].alloc));
        device->CreateCommandList(0, COPY,
            m_slots[i].alloc.Get(), nullptr, IID_PPV_ARGS(&m_slots[i].list));
        m_slots[i].list->Close();
    }
    
    //  BeginRecording ------------------------------------------------------
    void BeginRecording()
    {
        Slot& s = m_slots[m_curSlot];
    
        // if GPU is still using this slot – wait
        if (m_fence->GetCompletedValue() < s.fenceValue)
        {
            m_fence->SetEventOnCompletion(s.fenceValue, m_fenceEvent);
            WaitForSingleObject(m_fenceEvent, INFINITE);
        }
    
        ThrowIfFailed( s.alloc->Reset() );
        ThrowIfFailed( s.list ->Reset(s.alloc.Get(), nullptr) );
    }
    
    //  SubmitUploads -------------------------------------------------------
    void SubmitUploads()
    {
        if (!m_hasPendingCopies) return;
    
        Slot& s = m_slots[m_curSlot];
        ThrowIfFailed( s.list->Close() );
    
        ID3D12CommandList* l[] = { s.list.Get() };
        m_copyQueue->ExecuteCommandLists(1, l);
    
        s.fenceValue = m_fenceValue;
        m_copyQueue->Signal(m_fence.Get(), s.fenceValue);
        ++m_fenceValue;
    
        // advance to next slot
        m_curSlot = (m_curSlot + 1) % kNumSlots;
        m_hasPendingCopies = false;
    }
    

    With N slots you can record up to N in-flight batches without ever blocking the CPU, and the allocator-sync error is gone.

    ─────────────────────────────────────────────────────────────────────────────── Pick your poison ───────────────────────────────────────────────────────────────────────────────

    • If you just want the crash gone quickly → apply the micro-fix (1).
    • If you want the typical modern Direct3D 12 pattern that never stalls the CPU → implement the slot pool (2).

    Both solutions keep your public interface, mesh description formats, and fence query (handle->IsReady) unchanged.

Responses were produced in different, uncontrolled contexts (system prompts, settings, prior turns). This is not a benchmark.